NETLink PRO

NETLink PRO dialog

param

Enable NETLink PRO Compact

Check this to enable support for the NETLink PRO Compact adapter.

param

Host/Addr:

param

Protocol Type

IP address of the NETLink PRO Compact adapter.

param

NET Link MPI device

param

Ping before connecting

Check this field to limit the TCP/IP connection load by pinging the device before attempting to open the COM port.

If the device does not respond to a ping message no attempt is made to open the port.

param

Cycle On

Use this field to specify the message generated when the cycle is on.

param

Cycle Off

Use this field to specify the message generated when the cycle is off.

param

Enable Feed Hold

Check this to enable feed hold.

param

Feed hold On

Use this field to specify the message generated when feed hold on.

Feed hold includes single step etc.

param

Feed hold Off

Use this field to specify the message generated when feed hold is off.

Feed hold includes single step etc.

param

M30 Counter #1

Use this field to specify the message generated when M30 Counter #1 changes

param

Enable control modes

Check this field to enable control modes.

Overrides

Spindle speed

Feed rate

Rapid feed

Variables

param

Enabled

param

Address

Domain address.

param

Bytes

How many Bytes are read.

For example for reading of 1 byte beginning at address DBB 21.35 should be here 1.

For reading of 2 bytes from address DBB 21.35 should be here 2.

param

Data Type

param

Operation

Trigger Bit: trigger bit in read byte.

Trigger Mask: trigger more than one bit.

Text: read Bytes are converted to text.

param

Bit,Byte mask

Bit or Byte mask.

param

Text Length

Address where is stored actual text length. If this is empty, than is read length of text same like count of read bytes.

param

On

param

Off