Barcode Redirect
Use this dialog to configure redirection of barcode messages.
When using redirection the operator first scans a barcode for that selects a machine, and then he scans the 'reason code'. The barcode that sets the machine must start with the start trigger specified on the 'Barcode / DPRNT' page, followed by the 'Redirect Trigger'.
Exanple: If 'MAC' is used as trigger for Barcode/DPRNT messages, and 'MCH' is the redirect trigger, and the port id for the machine is 5 (see the list of ports on this page to get the correct port ID's), then the barcode must be 'MAC' + 'MCH' + '0005' = 'MACMCH0005'.
Redirect barcode messages
Check this field to enable redirection of barcode messages.
When using redirection the operator first scans a barcode for that selects a machine, and then he scans the 'reason code'. The barcode that sets the machine must start with the start trigger specified on the 'Barcode / DPRNT' page, followed by the 'Redirect Trigger'.
Exanple: If 'MAC' is used as trigger for Barcode/DPRNT messages, and 'MCH' is the redirect trigger, and the port id for the machine is 5 (see the list of ports on this page to get the correct port ID's), then the barcode must be 'MAC' + 'MCH' + '0005' = 'MACMCH0005'.
Redirect trigger
Use this field to configure the barcode 'Redirect Trigger'.
When using redirection the operator first scans a barcode for that selects a machine, and then he scans the 'reason code'. The barcode that sets the machine must start with the start trigger specified on the 'Barcode / DPRNT' page, followed by the 'Redirect Trigger'.
Exanple: If 'MAC' is used as trigger for Barcode/DPRNT messages, and 'MCH' is the redirect trigger, and the port id for the machine is 5 (see the list of ports on this page to get the correct port ID's), then the barcode must be 'MAC' + 'MCH' + '0005' = 'MACMCH0005'.
Redirect preview
Use this field to preview the barcode redirect trigger.
When using redirection the operator first scans a barcode for that selects a machine, and then he scans the 'reason code'. The barcode that sets the machine must start with the start trigger specified on the 'Barcode / DPRNT' page, followed by the 'Redirect Trigger'.
Exanple: If 'MAC' is used as trigger for Barcode/DPRNT messages, and 'MCH' is the redirect trigger, and the port id for the machine is 5 (see the list of ports on this page to get the correct port ID's), then the barcode must be 'MAC' + 'MCH' + '0005' = 'MACMCH0005'.
Max time between port ID and msg.
Use this field to specify the maximum time the operator has between scanning the barcode with the machine number and the barcode with the reason code.
If the operator accidentally scans the wrong machine barcode, he must wait the time specified here before scanning a new machine barcode.
Select ports to redirect to (no selection = all)
Use this field to select which machines this port should be allowed to redirect messages to.
If no machines are selected, then this port can redirect barcodes to all machines on this server.
