Program Offset

Program offset dialog

param

Offset manually transmitted programs

Check this field to enable online offset adjustment.

When a user sends a file from the client, the client will prompt the user to specify a number of offset values.

The values will be inserted in the program on the first line that contains the 'Offset Command' specified below.

Example: If the specified offset command is G54, and the user specifies X=10 and Y=10, the first line containing G54, Will be replaced with 'G54 X10 Y10'.

param

Parameter Trigger

Use this field to specify a 'Offset Parameter'.

When a user sends a file from the client, the client will prompt the user to specify a number of offset values.

The values will be inserted in the program on the first line that contains the 'Offset Command'.

Example: If the specified offset command is G54, and the user specifies X=10 and Y=10, the first line containing G54, Will be replaced with 'G54 X10 Y10'.

param

Min. Value

Use this field to specify the minimum value for this parameter.

LEave this field empty if there is no minimum.

param

Max. Value

Use this field to specify the maximum value for this parameter.

LEave this field empty if there is no maximum.

param

Offset Command

Use this field to specify the 'Offset Command'.

When a user sends a file from the client, the client will prompt the user to specify a number of offset values.

The values will be inserted in the program on the first line that contains the 'Offset Command'.

Example: If the specified offset command is G54, and the user specifies X=10 and Y=10, the first line containing G54, Will be replaced with 'G54 X10 Y10'.

param

Format

Use this field to specify the format of the values.