Remote Client Configuration

To use the remote administration feature, TCP/IP must be installed on both the server and client computers.

If the server and client are located on the same TCP/IP sub-net (i.e. they have the same sub net mask), no further configuration is needed, since the client will auto detect any servers on the same sub net.

If you need to configure/control a server located behind a firewall, you might have to open the DNC-Max ports in the firewall. By default DNC-Max uses port 4444 and 4445.

Changing the TCP/IP ports used by DNC-Max

If you need to change the ports used by DNC-Max, you will have to modify the DNC-Max configuration files manually.

The server configuration file is located in \CFG\DNCMax.ini.

Open the configuration file in a text editor like CIMCO Edit or Notepad, and locate the section [SYSPARAM] and change:

To

The client configuration file is located in the installation directory \CFG\DNCAdm.ini.

Open the configuration file in a text editor like CIMCO Edit or Notepad, and locate the section [SYSPARAM] and change:

To

You must make these changes on all servers and clients.