Data received as one long line

Problem: When trying to send data between the DNC server and the CNC, the data is received as one long line.

This is most likely caused by incorrect linefeed character setting.

1. Send data from CNC

Try to send data from the CNC to the DNC server. Then look at the terminal window, and see what the CNC sends a linefeed characters.

When you have determined the correct line feed character(s), change the port configuration to match this.

For further information, please refer to Transmit.

You must check the Show CR/LF field on the terminal tab.

2. Machine is using EIA code

Set machine to ASCII/ISO, or select EIA in the port configuration.

Refer to the RS232 setup page in your control or to the CNC's manual for further information.