Sólido

En esta sección se describen las funciones del menú Sólido y la simulación del modelo sólido.

The Solid Model is only available for Milling operations when using the Backplot Window option.

En menú 'Sólido'.

param

Modelo sólido

Muestra u oculta el modelo sólido.

Haga clic en este icono para cambiar entre la vista de trayectorias de herramienta y la visualización sólida con trayectorias.

param

Zoom / Regenerar sólido

Crea un sólido de la vista actual.

Click this icon to regenerate a solid model of the workpiece, based on the settings specified in the Solid Setup. You can select if the toolpath should be shown or hidden when a solid model is displayed.

When this option is enabled, the program will be checked for collision during dynamic simulation. The collision check options are activated in the Solid Setup dialog.

When a collision is detected, the simulation stops one block before the collision - both in the graphical simulation and the NC program.

param

Solid Setup for Milling operations

Haga clic en este icono para configurar el modelo sólido. Las dimensiones del bloque introducidas son los valores máximos y mínimos de X, Y y Z en su programa de CN. Si quiere aumentar o disminuir las dimensiones del bloque para conseguir una trayectoria mucho más igualada, entonces haga clic una o varias veces en el botón correspondiente (+5% o -5%) para obtener las dimensiones deseadas. Use el botón Redondear para redondear a valores enteros las dimensiones del bloque.

Solid Setup dialog for milling.

If the "Automatic stock scanning" option is enabled, stock dimensions will automatically be scanned from the NC program file. To specify stock dimensions within an NC program, add a comment with the following layouts:

Decimal numbers are supported. The +/- sign is required to be in front of each value.

Input fields are disabled when Stock dimensions are found and Automatic stock scanning is enabled.

param

Solid Setup for Turning operations

Click this icon to configure the Solid Model for the Solid Animation. The specified stock dimensions are the maximum values in your NC program, and the Position on Z is calculated on basis of these values. Use the button Round to round off stock dimensions, click Reset to revert to the stock original values.

Solid Setup dialog for turning.

The Lock stock dimension option allows you to lock the stock dimensions to a machine. Checking this field saves the stock values in the machine settings, so they are available for used in other NC programs. This is especially useful when testing different NC programs on the machine.

The stock dimensions are locked temporary and will not be available when CIMCO Edit v7 is restarted.