You have to configure the TNC (NFS client) to run with the CIMCO NFS Server (also see the user manual).
Enter the code number: NET123
| ADDRESS | TCP/IP addresses for the control, e.g.: 192.168.1.10 |
| NETMASK | The netmask used by your network, e.g. 255.255.255.0 |
| ROUTER | Empty or address for the used router, e.g.: 192.168.1.1 |
| PROT | RFC (protocol) |
| HW | 10Base2 (for coax) or 10BaseT (for RJ45) |
| HOST | Empty or alias-name of the control, e.g.: NC |
| ADDRESS | TCP/IP addresses for the NFS Server, e.g.: 192.168.1.20 |
| RS | 4096 |
| WS | 4096 |
| TIMEOUT | 0 |
| HM | 1 |
| DEVICENAME | Name of the server, e.g.: SERVER |
| PATH | Name of the export name defined e.g.: /NCPROG |
| DOMAIN | Empty or alias-name of the TNC) |
| UID | 0 |
| GID | 0 |
| DCM | %111111111 |
| FCM | %111111111 |
| AM | 1 |
With this setting, the control will automatically connect to the CIMCO NFS Server every time it is started. Alternatively you can establish/mount the connection manually by using the "Mount" softkey.