CIMCO Edit 5 Releases

CIMCO Edit 5.60.80 PreviewReleased: 29-10-10Register to download
Changes since previous version:
CIMCO Edit 5.60.80
  • No changes in this version. Released as part of CIMCO Software version 5.60.80
CIMCO Edit 5.60.79 PreviewReleased: 26-10-10
Changes since previous version:
CIMCO Edit 5.60.79
  • No changes in this version. Released as part of CIMCO Software version 5.60.79
CIMCO Edit 5.60.78 PreviewReleased: 20-10-10
Changes since previous version:
CIMCO Edit 5.60.78
  • No changes in this version. Released as part of CIMCO Software version 5.60.78
CIMCO Edit 5.60.77 PreviewReleased: 20-10-10
Changes since previous version:
CIMCO Edit 5.60.77
  • No changes in this version. Released as part of CIMCO Software version 5.60.77
CIMCO Edit 5.60.76 PreviewReleased: 20-10-10
Changes since previous version:
CIMCO Edit 5.60.76
  • No changes in this version. Released as part of CIMCO Software version 5.60.76
CIMCO Edit 5.60.75 PreviewReleased: 18-10-10
Changes since previous version:
CIMCO Edit 5.60.75
  • Updated backplot.
CIMCO Edit 5.60.74 PreviewReleased: 06-10-10
Changes since previous version:
CIMCO Edit 5.60.74
  • Updated Mazatrol viewer.
  • Fixed backplot tool size problem.
CIMCO Edit 5.60.73 PreviewReleased: 24-09-10
Changes since previous version:
CIMCO Edit 5.60.73
  • Added support for shoing additional tool information in the Mazatrol viewer.
CIMCO Edit 5.60.72 PreviewReleased: 21-09-10
Changes since previous version:
CIMCO Edit 5.60.72
  • No changes in this version. Released as part of CIMCO Software version 5.60.72
CIMCO Edit 5.60.71 PreviewReleased: 09-09-10
Changes since previous version:
CIMCO Edit 5.60.71
  • No changes in this version. Released as part of CIMCO Software version 5.60.71
CIMCO Edit 5.60.70 PreviewReleased: 02-09-10
Changes since previous version:
CIMCO Edit 5.60.70
  • No changes in this version. Released as part of CIMCO Software version 5.60.70
CIMCO Edit 5.60.69 PreviewReleased: 30-08-10
Changes since previous version:
CIMCO Edit 5.60.69
  • Updated Mazatrol viewer.
CIMCO Edit 5.60.68 PreviewReleased: 24-08-10
Changes since previous version:
CIMCO Edit 5.60.68
  • Updated translations.
CIMCO Edit 5.60.67 PreviewReleased: 10-08-10
Changes since previous version:
CIMCO Edit 5.60.67
  • No changes in this version. Released as part of CIMCO Software version 5.60.67
CIMCO Edit 5.60.66 PreviewReleased: 09-08-10
Changes since previous version:
CIMCO Edit 5.60.66
  • No changes in this version. Released as part of CIMCO Software version 5.60.66
CIMCO Edit 5.60.65 PreviewReleased: 26-07-10
Changes since previous version:
CIMCO Edit 5.60.65
  • Updated backplot converters.
  • Fixed Japanese font problem in the Mazatrol viewer.
CIMCO Edit 5.60.64 PreviewReleased: 08-07-10
Changes since previous version:
CIMCO Edit 5.60.64
  • No changes in this version. Released as part of CIMCO Software version 5.60.64
CIMCO Edit 5.60.63 PreviewReleased: 08-07-10
Changes since previous version:
CIMCO Edit 5.60.63
  • No changes in this version. Released as part of CIMCO Software version 5.60.63
CIMCO Edit 5.60.62 PreviewReleased: 07-07-10
Changes since previous version:
CIMCO Edit 5.60.62
  • Updated translations.
CIMCO Edit 5.60.61 PreviewReleased: 25-06-10
Changes since previous version:
CIMCO Edit 5.60.61
  • No changes in this version. Released as part of CIMCO Software version 5.60.61
CIMCO Edit 5.60.60 PreviewReleased: 18-06-10
Changes since previous version:
CIMCO Edit 5.60.60
  • Added support for Mazak MT640 Pro. files without headers in the Mazatrol viewer.
  • Updated tool list generator.
  • Updated backplot converters.
CIMCO Edit 5.60.59 PreviewReleased: 09-06-10
Changes since previous version:
CIMCO Edit 5.60.59
  • Added option to force tool list generator to scan for tool information below the tool change. Ref: Setup/Global Setup/File Types/Tool list/ Scan comments below tool name
  • Fixed problem specifying colors for characters other than letters.
CIMCO Edit 5.60.58 PreviewReleased: 04-06-10
Changes since previous version:
CIMCO Edit 5.60.58
  • No changes in this version. Released as part of CIMCO Software version 5.60.58
CIMCO Edit 5.60.57 PreviewReleased: 03-06-10
Changes since previous version:
CIMCO Edit 5.60.57
  • No changes in this version. Released as part of CIMCO Software version 5.60.57
CIMCO Edit 5.60.56 PreviewReleased: 01-06-10
Changes since previous version:
CIMCO CNC-Calc 5.60.56
  • Added option to output G0/G1/.. as G00/G01/... Ref: Setup/Machine Type/Output G0x
  • Added option to output FMAX as F9999 when generating Heidenhain code. Ref: Setup/Machine Type/Output FMAX as F9999
CIMCO Edit 5.60.55 PreviewReleased: 28-05-10
Changes since previous version:
CIMCO Edit 5.60.55
  • Added support for using a cylindrical stock in the solid verification.
  • Changed 'Color entire line' option to not color comments/block skips.
  • Fixed problem using tools with alpha numerical names in the backplot. (ex. TT="Roughing Tool D12")
  • Fixed problem with multi line comment colors not updating correctly when modal colors were disabled.
CIMCO Edit 5.60.54 PreviewReleased: 27-05-10
Changes since previous version:
CIMCO Edit 5.60.54
  • No changes in this version. Released as part of CIMCO Software version 5.60.54
CIMCO Edit 5.60.53 PreviewReleased: 27-05-10
Changes since previous version:
CIMCO Edit 5.60.53
  • Fixed problem using the measure function when backplot window lost focus.
CIMCO Edit 5.60.52 PreviewReleased: 25-05-10
Changes since previous version:
CIMCO Edit 5.60.52
  • No changes in this version. Released as part of CIMCO Software version 5.60.52
CIMCO Edit 5.60.51 PreviewReleased: 19-05-10
Changes since previous version:
CIMCO Edit 5.60.51
  • Fixed problem printin Japanese Mazatrol files.
CIMCO Edit 5.60.50 PreviewReleased: 17-05-10
Changes since previous version:
CIMCO Edit 5.60.50
  • Updated backplot converters.
  • Fixed crash when closing multiple backplot windows using 'Close All'.
CIMCO Edit 5.60.49 PreviewReleased: 16-05-10
Changes since previous version:
CIMCO Edit 5.60.49
  • Updated Mazatrol viewer.
CIMCO Edit 5.60.48 PreviewReleased: 07-05-10
Changes since previous version:
CIMCO Edit 5.60.48
  • Fixed problem when opening Mazatrol file type where machine type was not licensed in the keyfile.
CIMCO Edit 5.60.47 PreviewReleased: 29-04-10
Changes since previous version:
CIMCO Edit 5.60.47
  • Added option to specify font used for viewing Mazatrol files.
  • Updated Mazatrol viewer for Mazak M640M and M640T.
CIMCO Edit 5.60.46 PreviewReleased: 28-04-10
Changes since previous version:
CIMCO Edit 5.60.46
  • New CNC-Calc Turning Roughing implementation with support for finishing passes.
  • Updated remote support client.
CIMCO Edit 5.60.45 PreviewReleased: 22-04-10
Changes since previous version:
CIMCO Edit 5.60.45
  • Updated backplot converters.
  • Fixed problem selecting tool lists templates with a long path/name.
CIMCO Edit 5.60.44 PreviewReleased: 22-04-10
Changes since previous version:
CIMCO Edit 5.60.44
  • No changes in this version. Released as part of CIMCO Software version 5.60.44
CIMCO Edit 5.60.43 PreviewReleased: 21-04-10
Changes since previous version:
CIMCO Edit 5.60.43
  • Updated backplot converters.
CIMCO Edit 5.60.42 PreviewReleased: 20-04-10
Changes since previous version:
CIMCO Edit 5.60.42
  • Added support for panning/zooming in backplot while meassuring.
  • Added basic Hidenhain ISO, Fanuc Robot and APT backplot viewers.
CIMCO Edit 5.60.41 PreviewReleased: 15-04-10
Changes since previous version:
CIMCO Edit 5.60.41
  • Added support for specifying a block skip string longer than 1 character in the machine setup.
CIMCO Edit 5.60.40 PreviewReleased: 12-04-10
Changes since previous version:
CIMCO Edit 5.60.40
  • Updated Mazatrol viewer.
  • Updated backplot.
CIMCO Edit 5.60.39 PreviewReleased: 09-04-10
Changes since previous version:
CIMCO Edit 5.60.39
  • Added support for coloring multi line comments. Ref: Setup/File types/Machine/Enable multi line comments
  • Added Deckel Dialog 4 backplot support.
  • Added simple Fanuc Laser/Plasma/Punch backplot support.
  • Added support for view Mazak SmartTurn mazatrol files.
  • Improved layout of pictures on macro dialog.
  • Fixed problem with the macro 'Use sign' option in some cases.
CIMCO Edit 5.60.38 PreviewReleased: 30-03-10
Changes since previous version:
CIMCO Edit 5.60.38
  • Updated Mazatrol viewer.
  • Updated CNC-Calc.
CIMCO Edit 5.60.37 PreviewReleased: 17-03-10
Changes since previous version:
CIMCO Edit 5.60.37
  • Added support for simulating sub-programs from external files in the Heidenhain simulation.
  • Fixed problem with missing input fields in some cases when a macro picture was selected.
CIMCO Edit 5.60.36 PreviewReleased: 16-03-10
Changes since previous version:
CIMCO Edit 5.60.36
  • Fixed feedrate problem in CNC-Calc.
CIMCO Edit 5.60.35 PreviewReleased: 12-03-10
Changes since previous version:
CIMCO Edit 5.60.35
  • Updated Mazak Mazatrol viewer.
CIMCO Edit 5.60.34 PreviewReleased: 12-03-10
Changes since previous version:
CIMCO Edit 5.60.34
  • No changes in this version. Released as part of CIMCO Software version 5.60.34
CIMCO Edit 5.60.33 PreviewReleased: 11-03-10
Changes since previous version:
CIMCO Edit 5.60.33
  • No changes in this version. Released as part of CIMCO Software version 5.60.33
CIMCO Edit 5.60.32 PreviewReleased: 09-03-10
Changes since previous version:
CIMCO Edit 5.60.32
  • Fixed problem using the /t command line option together with /plotonly
CIMCO Edit 5.60.31 PreviewReleased: 05-03-10
Changes since previous version:
CIMCO Edit 5.60.31
  • Updated Mazak Mazatrol viewer.
CIMCO Edit 5.60.30 PreviewReleased: 02-03-10
Changes since previous version:
CIMCO Edit 5.60.30
  • Updated Mazak Mazatrol viewer.
CIMCO Edit 5.60.29 PreviewReleased: 24-02-10
Changes since previous version:
CIMCO Edit 5.60.29
  • No changes in this version. Released as part of CIMCO Software version 5.60.29
CIMCO Edit 5.60.28 PreviewReleased: 19-02-10
Changes since previous version:
CIMCO Edit 5.60.28
  • Updated CNC-Calc Deckel Dialog 4 format.
CIMCO Edit 5.60.27 PreviewReleased: 17-02-10
Changes since previous version:
CIMCO Edit 5.60.27
  • Added button to remove image from macros.
  • Updated CNC-Calc.
CIMCO Edit 5.60.26 PreviewReleased: 16-02-10
Changes since previous version:
CIMCO Edit 5.60.26
  • Added support for associating pictures with macros.
  • Changed cycle/macro setup to check for user configuration password.
  • Fixed problem with unicode files opened in the Mazatrol viewer in some cases.
  • Fixed crash when comparing some Mazatrol files.
CIMCO Edit 5.60.25 PreviewReleased: 12-02-10
Changes since previous version:
CIMCO Edit 5.60.25
  • Added Deckel 4 support in CNC-Calc.
  • Added Mazatrol sample files in the \Samples directory.
  • Updated Mazatrol viewer.
CIMCO Edit 5.60.24 PreviewReleased: 25-01-10
Changes since previous version:
CIMCO Edit 5.60.24
  • No changes in this version. Released as part of CIMCO Software version 5.60.24
CIMCO Edit 5.60.23 PreviewReleased: 22-01-10
Changes since previous version:
CIMCO Edit 5.60.23
  • Updated backplot converters.
  • Fixed problem loading some DXF files in CNC-Calc.
CIMCO Edit 5.60.22 PreviewReleased: 20-01-10
Changes since previous version:
CIMCO Edit 5.60.22
  • No changes in this version. Released as part of CIMCO Software version 5.60.22
CIMCO Edit 5.60.21 PreviewReleased: 19-01-10
Changes since previous version:
CIMCO Edit 5.60.21
  • No changes in this version. Released as part of CIMCO Software version 5.60.21
CIMCO Edit 5.60.20 PreviewReleased: 18-01-10
Changes since previous version:
CIMCO Edit 5.60.20
  • Added document about using formulas to the Samples\Formulas folder.
CIMCO Edit 5.60.19 PreviewReleased: 16-01-10
Changes since previous version:
CIMCO Edit 5.60.19
  • Updated backplot.
CIMCO Edit 5.60.18 PreviewReleased: 14-01-10
Changes since previous version:
CIMCO Edit 5.60.18
  • Updated backplot converters.
  • Updated Brother viewer.
CIMCO Edit 5.60.17 PreviewReleased: 10-01-10
Changes since previous version:
CIMCO Edit 5.60.17
  • No changes in this version. Released as part of CIMCO Software version 5.60.17
CIMCO Edit 5.60.16 PreviewReleased: 21-12-09
Changes since previous version:
CIMCO Edit 5.60.16
  • Added warning message when downloading a new version and NC-Base is active.
  • Updated Siemens bacplot and added sample files.
  • Fixed problem previewing remote files from the docked DNC-Max client file dialog.
CIMCO Edit 5.60.15 PreviewReleased: 16-12-09
Changes since previous version:
CIMCO Edit 5.60.15
  • Updated backplot converters.
CIMCO Edit 5.60.14 PreviewReleased: 14-12-09
Changes since previous version:
CIMCO Edit 5.60.14
  • Fixed problem using license server with activation keys.
CIMCO Edit 5.60.13 PreviewReleased: 11-12-09
Changes since previous version:
CIMCO Edit 5.60.13
  • Updated Mazatrol file compare colors.
  • Updated Mazatrol viewer.
  • Fixed problem printing some lines when printing in multiple columns.
  • Fixed problem with the 'Always start in root directory' when using 'Use manual receive directory'.
CIMCO Edit 5.60.12 PreviewReleased: 27-11-09
Changes since previous version:
CIMCO Edit 5.60.12
  • No changes in this version. Released as part of CIMCO Software version 5.60.12
CIMCO Edit 5.60.11 PreviewReleased: 27-11-09
Changes since previous version:
CIMCO Edit 5.60.11
  • Updated backplot
CIMCO CNC-Calc 5.60.11
  • Added side and depth cuts to Contour and Pocket milling.
  • Contour milling can now use user defined feedrates.
  • Added support for negative stock to leave in rouging turning.
  • Fixed problem saving Grooving parameters.
CIMCO Edit 5.60.10 PreviewReleased: 25-11-09
Changes since previous version:
CIMCO Edit 5.60.10
  • No changes in this version. Released as part of CIMCO Software version 5.60.10
CIMCO Edit 5.60.09 PreviewReleased: 23-11-09
Changes since previous version:
CIMCO Edit 5.60.09
  • No changes in this version. Released as part of CIMCO Software version 5.60.09
CIMCO Edit 5.60.08 PreviewReleased: 10-11-09
Changes since previous version:
CIMCO Edit 5.60.08
  • No changes in this version. Released as part of CIMCO Software version 5.60.08
CIMCO Edit 5.60.07 PreviewReleased: 08-11-09
Changes since previous version:
CIMCO Edit 5.60.07
  • Changed backplot to show 3 or 4 decimal places deping on the 'Setup/Machine/Toolpath Unit' setting.
  • Changed 'Insert Spaces' to skip the = and " characters.
  • Updated backplot.
  • Fixed problem reading/modifying some macros
CIMCO Edit 5.60.06 PreviewReleased: 30-10-09
Changes since previous version:
CIMCO Edit 5.60.06
  • Improved CNC-Calc dialog layout.
  • Fixed problem using backplot on some systems.
CIMCO Edit 5.60.05 PreviewReleased: 29-10-09
Changes since previous version:
CIMCO Edit 5.60.05
  • Updated backplot.
CIMCO Edit 5.60.04 PreviewReleased: 28-10-09
Changes since previous version:
CIMCO Edit 5.60.04
  • Fixed crash in CNC-Calc.
CIMCO Edit 5.60.03 PreviewReleased: 28-10-09
Changes since previous version:
CIMCO Edit 5.60.03
  • Added support for additional Mazatrol formats.
  • Changes 'File Save As' to save the original file when viewing Mazatrol files.
  • Changed backplot to use the unit (metric or inch) selected in the machine configuration when loading an STL file.
  • Fixed problem updating backplot showing radius compenstation when changing tools.
  • Fixed problem with some NC files showing only a black screen when the Mazatrol viewer was enabled.
  • Fixed problem maximizing editor window in some multi monitor configurations when secondary monitor resolution was higher than primary display resolution.
  • Fixed crash when starting editor with all plugins loaded.
  • Fixed problem with creating solid model when using drills.
CIMCO Edit 5.60.02 PreviewReleased: 16-10-09
Changes since previous version:
CIMCO Edit 5.60.02
  • Improved log update speed for programs with many log entries (>1000).
  • Fixed problem maximizing editor window in some multi monitor configurations.
  • Fixed crash when comparing 2 Mazatrol files using 'Compare File With File'.
CIMCO Edit 5.60.01 PreviewReleased: 14-10-09
Changes since previous version:
CIMCO Edit 5.60.01
  • Added support for viewing M2, M32, M+ and Fusion (M640) Mazatrol files.
  • Added option to rember values used in 'Simple Math Functions' Ref: Setup/Editor/Remeber math values
  • Added option to automatically insert spaces when opening a file. Ref: Setup/Other Settings/Insert spaces when opening file
  • Changed editor to keep toolbar layout when upgrading license.
  • Updated backplot converters.
  • Fixed incorrect error message when trying to save a file to a read-only drive.
  • Fixed problem with disabling radius compensation in the backplot.
  • Fixed incorrect text and tool tips for the 'Ignore duplicate info' and 'Ignore 0's' options in the tool list setup.
  • Fixed problem printing Mazatrol files when color printing was enabled.
CIMCO Edit 5.50.64 PreviewReleased: 27-08-09
Changes since previous version:
CIMCO Edit 5.50.64
  • Fixed problem when specifying invalid value in the CNC-Calc Letter Milling dialog.
  • Fixed CNC-Calc resize problem.
CIMCO Edit 5.50.63 PreviewReleased: 24-08-09
Changes since previous version:
CIMCO Edit 5.50.63
  • Fixed CNC-Calc arc problem.
CIMCO Edit 5.50.62 PreviewReleased: 21-08-09
Changes since previous version:
CIMCO Edit 5.50.62
  • Added support for generating multiple Helix milling or Thread milling holes in one operation in CNC-Calc.
  • Added new selection filter to CNC-Calc drilling dialogs.
  • Added support for removing address (letter followed by value). Ref: NC Functions/Insert\Remove/Remove Strings : "Remove Address/Letter"
  • Added option to prompt for language before viewing Mazatrol files. Ref: Setup/Global/Mazatrol Viewer/Language/Prompt for language
  • Changed tool path statistics export function to open untitled file in the editor.
CIMCO Edit 5.50.61 PreviewReleased: 19-08-09
Changes since previous version:
CIMCO Edit 5.50.61
  • No changes in this version. Released as part of CIMCO Software version 5.50.61
CIMCO Edit 5.50.60 PreviewReleased: 18-08-09
Changes since previous version:
CIMCO Edit 5.50.60
  • Added Roeders back plot converter.
  • Fixed problem showing reverse contours in CNC-Calc.
CIMCO Edit 5.50.59 PreviewReleased: 17-08-09
Changes since previous version:
CIMCO Edit 5.50.59
  • Fixed problem with CNC-Calc Fanuc drilling cycles.
CIMCO Edit 5.50.58 PreviewReleased: 14-08-09
Changes since previous version:
CIMCO Edit 5.50.58
  • Fixed CNC-Calc error message for "Lead in/out" in contour milling so it is possible to create "No Compensation" tool paths without lead in/out.
  • Fixed problem in CNC-Calc with exporting linearized milling contour arcs.
CIMCO Edit 5.50.57 PreviewReleased: 14-08-09
Changes since previous version:
CIMCO Edit 5.50.57
  • Added support for generating tool lists. Ref: NC Functions/Make Tool list
  • Fixed problem with CNC-Calc Fanuc drilling cycles.
CIMCO Edit 5.50.56 PreviewReleased: 12-08-09
Changes since previous version:
CIMCO Edit 5.50.56
  • Fixed problem with CNC-Calc lathe finishing.
CIMCO Edit 5.50.55 PreviewReleased: 11-08-09
Changes since previous version:
CIMCO Edit 5.50.55
  • Updated Mazatrol viewer.
CIMCO Edit 5.50.54 PreviewReleased: 06-08-09
Changes since previous version:
CIMCO Edit 5.50.54
  • Updated back plot.
CIMCO Edit 5.50.53 PreviewReleased: 05-08-09
Changes since previous version:
CIMCO Edit 5.50.53
  • Updated Mazatrol viewer.
CIMCO Edit 5.50.52 PreviewReleased: 05-08-09
Changes since previous version:
CIMCO Edit 5.50.52
  • Improved CNC-Calc information bar layout.
CIMCO Edit 5.50.51 PreviewReleased: 05-08-09
Changes since previous version:
CIMCO Edit 5.50.51
  • Improved CNC-Calc toolbar layout.
CIMCO Edit 5.50.50 PreviewReleased: 25-07-09
Changes since previous version:
CIMCO Edit 5.50.50
  • Fixed CNC-Calc crash when opening multiple drawings.
CIMCO Edit 5.50.49 PreviewReleased: 24-07-09
Changes since previous version:
CIMCO Edit 5.50.49
  • Added support for exporting back plot to a DXF file. Ref: Back plot/Export as DXF File
  • Fixed problem with CNC-Calc machine zero in lathe mode.
CIMCO Edit 5.50.48 PreviewReleased: 21-07-09
Changes since previous version:
CIMCO Edit 5.50.48
  • No changes in this version. Released as part of CIMCO Software version 5.50.48
CIMCO Edit 5.50.47 PreviewReleased: 16-07-09
Changes since previous version:
CIMCO Edit 5.50.47
  • Added axis substitution in CNC-Calc.
CIMCO Edit 5.50.46 PreviewReleased: 14-07-09
Changes since previous version:
CIMCO Edit 5.50.46
  • Fixed CNC-Calc ISO NC code peck drilling problem.
CIMCO Edit 5.50.45 PreviewReleased: 07-07-09
Changes since previous version:
CIMCO Edit 5.50.45
  • Updated back plot converters.
  • Fixed problem viewing some Mazatrol files.
CIMCO Edit 5.50.44 PreviewReleased: 01-07-09
Changes since previous version:
CIMCO Edit 5.50.44
  • Fixed problem with CNC-Calc feedrates when creating multiple pocket operations.
  • Fixed problem with multiple editor processes shown in the task list.
CIMCO Edit 5.50.43 PreviewReleased: 29-06-09
Changes since previous version:
CIMCO Edit 5.50.43
  • The points selected in CNC-Calc arc through 2 point, arc through 3 points, circle through 2 points and circle through 3 points, are now shown on the drawing.
  • The character '&' has been added to the simple CNC-Calc character set.
  • Updated back plot converters.
CIMCO Edit 5.50.42 PreviewReleased: 18-06-09
Changes since previous version:
CIMCO Edit 5.50.42
  • Updated Mazatrol viewer.
  • Updated back plot converters.
CIMCO Edit 5.50.41 PreviewReleased: 09-06-09
Changes since previous version:
CIMCO Edit 5.50.41
  • Updated back plot converters.
CIMCO Edit 5.50.40 PreviewReleased: 08-06-09
Changes since previous version:
CIMCO Edit 5.50.40
  • Added Thread Milling to CNC-Calc,
  • Updated CNC-Calc lead In/out for Helix Milling.
  • Updated back plot converters.
CIMCO Edit 5.50.39 PreviewReleased: 02-06-09
Changes since previous version:
CIMCO Edit 5.50.39
  • MDC-Max update.
CIMCO Edit 5.50.38 PreviewReleased: 29-05-09
Changes since previous version:
CIMCO Edit 5.50.38
  • Changed CNC-Calc default output from Gx to G0x for G00-G03.
CIMCO Edit 5.50.37 PreviewReleased: 28-05-09
Changes since previous version:
CIMCO Edit 5.50.37
  • Added option to always insert text in upper case / all caps. Ref: Setup/Editor/Always UPPER CASE
  • Updated Remote Support client.
  • Updated samples and macros.
  • Fixed problem with missing G40/G41/G42 codes in CNC-Calc ISO lathe code.
CIMCO Edit 5.50.36 PreviewReleased: 26-05-09
Changes since previous version:
CIMCO Edit 5.50.36
  • No changes in this version. Released as part of CIMCO Software version 5.50.36
CIMCO Edit 5.50.35 PreviewReleased: 14-05-09
Changes since previous version:
CIMCO Edit 5.50.35
  • Fixed problem with Heidenhain helix arc moves in CNC-Calc.
CIMCO Edit 5.50.34 PreviewReleased: 12-05-09
Changes since previous version:
CIMCO Edit 5.50.34
  • No changes in this version. Released as part of CIMCO Software version 5.50.34
CIMCO Edit 5.50.33 PreviewReleased: 11-05-09
Changes since previous version:
CIMCO Edit 5.50.33
  • Updated Mazatrol viewer.
  • Fixed crash when starting editor and .mac file contained invalid macro definitions.
CIMCO Edit 5.50.32 PreviewReleased: 07-05-09
Changes since previous version:
CIMCO Edit 5.50.32
  • Changed file compare to ignore block numbers that are specified using the alternate block number character.
CIMCO Edit 5.50.31 PreviewReleased: 29-04-09
Changes since previous version:
CIMCO Edit 5.50.31
  • Added new Fanuc Lathe converter to the back plot.
CIMCO Edit 5.50.30 PreviewReleased: 27-04-09
Changes since previous version:
CIMCO Edit 5.50.30
  • Updated CNC-Calc.
CIMCO Edit 5.50.29 PreviewReleased: 27-04-09
Changes since previous version:
CIMCO Edit 5.50.29
  • No changes in this version. Released as part of CIMCO Software version 5.50.29
CIMCO Edit 5.50.28 PreviewReleased: 24-04-09
Changes since previous version:
CIMCO CNC-Calc 5.50.28
  • Helix operation have been corrected, so the arc movements now adhere to the set max sweep angle.
  • Helix operations can now be made from top to bottom and bottom to top.
  • In the helix operation the full circle at the final depth is now optional.
CIMCO Edit 5.50.27 PreviewReleased: 22-04-09
Changes since previous version:
CIMCO Edit 5.50.27
  • Added option to start renumbering from a specific line. Ref: Setup/Block Numbers/Start from line
  • Added option to skip a number of lines when renumbering. Ref: Setup/Block Numbers/Skip
CIMCO Edit 5.50.26 PreviewReleased: 21-04-09
Changes since previous version:
CIMCO Edit 5.50.26
  • No changes in this version. Released as part of CIMCO Software version 5.50.26
CIMCO Edit 5.50.25 PreviewReleased: 20-04-09
Changes since previous version:
CIMCO Edit 5.50.25
  • No changes in this version. Released as part of CIMCO Software version 5.50.25
CIMCO Edit 5.50.24 PreviewReleased: 17-04-09
Changes since previous version:
CIMCO Edit 5.50.24
  • Updated CNC-Calc.
  • Updated back plot converters.
CIMCO Edit 5.50.23 PreviewReleased: 14-04-09
Changes since previous version:
CIMCO Edit 5.50.23
  • No changes in this version. Released as part of CIMCO Software version 5.50.23
CIMCO Edit 5.50.22 PreviewReleased: 07-04-09
Changes since previous version:
CIMCO Edit 5.50.22
  • Fixed problem showing the back plot on some systems.
CIMCO Edit 5.50.21 PreviewReleased: 06-04-09
Changes since previous version:
CIMCO Edit 5.50.21
  • No changes in this version. Released as part of CIMCO Software version 5.50.21
CIMCO Edit 5.50.20 PreviewReleased: 03-04-09
Changes since previous version:
CIMCO Edit 5.50.20
  • Added T2 support in the Mazatrol viewer.
  • Added support for loading STL files in the back plot. Ref: Back plot/Load STL File
  • Fixed color problem when reloading a Mazatrol file.
  • Fixed problem with NC-Assistant visible after closing back plot.
CIMCO Edit 5.50.19 PreviewReleased: 01-04-09
Changes since previous version:
CIMCO Edit 5.50.19
  • Improved NC-Assistant input dialog layout.
CIMCO Edit 5.50.18 PreviewReleased: 26-03-09
Changes since previous version:
CIMCO Edit 5.50.18
  • Increased number of NC-Assistant variables to 60.
  • Fixed problem creating a new file when using NC-Base. (introduced in 5.50.17)
  • Fixed problem with NC-Assistant hidden after closing back plot.
CIMCO Edit 5.50.17 PreviewReleased: 26-03-09
Changes since previous version:
CIMCO Edit 5.50.17
  • Fixed problem with NC-Base not updating the revision when manually editing a file and only inserting or removing blank lines.
  • Fixed problem with NC-Base not updating the revision when opening files outside NC-Base.
CIMCO Edit 5.50.16 PreviewReleased: 16-03-09
Changes since previous version:
CIMCO Edit 5.50.16
  • Updated Mazatrol viewer to support binary Mazatrol files.
CIMCO Edit 5.50.15 PreviewReleased: 09-03-09
Changes since previous version:
CIMCO Edit 5.50.15
  • Updated back plot converters.
CIMCO Edit 5.50.14 PreviewReleased: 03-03-09
Changes since previous version:
CIMCO Edit 5.50.14
  • Updated Mazatrol viewer.
CIMCO Edit 5.50.13 PreviewReleased: 25-02-09
Changes since previous version:
CIMCO Edit 5.50.13
  • Added new Siemens back plot converter.
CIMCO Edit 5.50.12 PreviewReleased: 25-02-09
Changes since previous version:
CIMCO Edit 5.50.12
  • Added option to select Mazatrol viewer language. Ref: Setup/Global/Mazatrol Viewer/Language
  • Added option to show Mazatrol TPC data. Ref: Setup/Global/Mazatrol Viewer/Show TPC data.
CIMCO Edit 5.50.11 PreviewReleased: 20-02-09
Changes since previous version:
CIMCO Edit 5.50.11
  • Updated back plot.
  • Updated Mazatrol viewer.
CIMCO Edit 5.50.10 PreviewReleased: 17-02-09
Changes since previous version:
CIMCO Edit 5.50.10
  • Updated Mazatrol viewer.
  • Fixed problem with rotating letters in CNC-Calc.
CIMCO Edit 5.50.09 PreviewReleased: 17-02-09
Changes since previous version:
CIMCO Edit 5.50.09
  • Updated Heidenhain/ISO converter.
  • Fixed zoom problem when importing DXF files.
  • Fixed G17/18/19 rotate/mirror problem.
CIMCO Edit 5.50.08 PreviewReleased: 05-02-09
Changes since previous version:
CIMCO Edit 5.50.08
  • Added support for selecting layers when importing DXF files.
  • Added additional sample programs.
  • Updated Mazatrol viewer.
CIMCO Edit 5.50.07 PreviewReleased: 22-01-09
Changes since previous version:
CIMCO Edit 5.50.07
  • Modified macro setup dialog to insert new macros at current position in the list.
CIMCO Edit 5.50.06 PreviewReleased: 20-01-09
Changes since previous version:
CIMCO Edit 5.50.06
  • Fixed problem with 'String not found' message not always shown on top of Editor.
CIMCO Edit 5.50.05 PreviewReleased: 19-01-09
Changes since previous version:
CIMCO Edit 5.50.05
  • Added option to specify number of decimals used in the Mazatrol Viewer. Ref: Setup/Global Setup/Mazatrol Viewer Decimals
  • Added option to specify back plot lathe coordinate system orientation. Ref: Setup/Machine Type/Back plot/Orientation
  • Updated Mazatrol Viewer.
CIMCO Edit 5.50.04 PreviewReleased: 19-01-09
Changes since previous version:
CIMCO Edit 5.50.04
  • Fixed crash in Mazatrol Viewer.
CIMCO Edit 5.50.03 PreviewReleased: 13-01-09
Changes since previous version:
CIMCO Edit 5.50.03
  • Updated Mazatrol Viewer.
  • Added option to disable Mazatrol Viewer when using a license server.
  • Reset Demo period.
  • Fixed license server installation problem.
CIMCO Edit 5.50.02 PreviewReleased: 11-01-09
Changes since previous version:
CIMCO Edit 5.50.02
  • Updated Mazatrol Viewer.
  • Updated back plot.
CIMCO Edit 5.50.01 PreviewReleased: 09-01-09
Changes since previous version:
CIMCO Edit 5.50.01
  • Initial 5.5 release.
CIMCO Edit 5.12.32 PreviewReleased: 09-01-09
Changes since previous version:
CIMCO Edit 5.12.32
  • No changes in this version. Released as part of CIMCO Software version 5.12.32
CIMCO Edit 5.12.31 PreviewReleased: 21-12-08Register to download
Changes since previous version:
CIMCO Edit 5.12.31
  • No changes in this version. Released as part of CIMCO Software version 5.12.31
CIMCO Edit 5.12.30 PreviewReleased: 17-12-08
Changes since previous version:
CIMCO Edit 5.12.30
  • Updated sample files.
CIMCO Edit 5.12.29 PreviewReleased: 14-12-08
Changes since previous version:
CIMCO Edit 5.12.29
  • Added link to download the latest version of the Editor. Ref: Help/Download Latest Version Ref: Setup/Global/Hide 'Download Latest Version'
CIMCO Edit 5.12.28 PreviewReleased: 10-12-08
Changes since previous version:
CIMCO Edit 5.12.28
  • Fixed macro calculation problem when a macro was just added/changed.
CIMCO Edit 5.12.27 PreviewReleased: 08-12-08
Changes since previous version:
CIMCO Edit 5.12.27
  • Added option to enable/disable 'wrapping' searches. Ref: Setup/Editor/Wrap Searches
  • Fixed problem using 'Save As' to add new programs to the database that caused file to be truncated to 1024 lines in some cases.
CIMCO Edit 5.12.26 PreviewReleased: 08-12-08
Changes since previous version:
CIMCO Edit 5.12.26
  • No changes in this version. Released as part of CIMCO Software version 5.12.26
CIMCO Edit 5.12.25 PreviewReleased: 01-12-08
Changes since previous version:
CIMCO Edit 5.12.25
  • Added '%U' option to print username in header/footers.
  • Added option to move locked files offline. Ref: Database/Setup/Machines/Advanced/Move Locked files offline
CIMCO Edit 5.12.24 PreviewReleased: 26-11-08
Changes since previous version:
CIMCO Edit 5.12.24
  • No changes in this version. Released as part of CIMCO Software version 5.12.24
CIMCO Edit 5.12.23 PreviewReleased: 24-11-08
Changes since previous version:
CIMCO Edit 5.12.23
  • Added CNC-Calc '+Z Programming' option to generate code for sliding-head lathes.
  • Fixed problem synchronizing NC-Base associated files when using the Synchronize folder functions.
  • Fixed problem saving the CNC-Calc '-X Programming' option.
  • Fixed problem with the 'Hide' button on the DNC send/receive status dialogs.
CIMCO Edit 5.12.22 PreviewReleased: 19-11-08
Changes since previous version:
CIMCO Edit 5.12.22
  • Fixed problem selecting a new NC-Base machine group directory if files should not be moved.
  • Changed send/receive dialogs to stop transfer when selecting Cancel.
CIMCO Edit 5.12.21 PreviewReleased: 17-11-08
Changes since previous version:
CIMCO Edit 5.12.21
  • MDC-Max update.
CIMCO Edit 5.12.20 PreviewReleased: 14-11-08
Changes since previous version:
CIMCO Edit 5.12.20
  • Added support for adding and empty ISO or Mazatrol when adding a new program to NC-Base.
  • Fixed back plot arc problem.
CIMCO Edit 5.12.19 PreviewReleased: 10-11-08
Changes since previous version:
CIMCO Edit 5.12.19
  • No changes in this version. Released as part of CIMCO Software version 5.12.19
CIMCO Edit 5.12.18 PreviewReleased: 04-11-08
Changes since previous version:
CIMCO Edit 5.12.18
  • Added function to synchronize contents of NC-Base machine folders.
  • Added support for exporting holes from CNC-Calc drilling cycles.
  • Added option to hide formula results for individual macros.
  • Improved NC-Base move base directory / move folder functions.
  • Changed behavior to set focus to unsaved window when using 'Close All'
  • Fixed problem with the macro functions acos() and asin().
CIMCO Edit 5.12.17 PreviewReleased: 27-10-08
Changes since previous version:
CIMCO Edit 5.12.17
  • Fixed problem with the macro functions acos(), asin() and atan().
  • Fixed problem saving the "Hide NC-Assistant formula" setting.
CIMCO Edit 5.12.16 PreviewReleased: 20-10-08
Changes since previous version:
CIMCO Edit 5.12.16
  • No changes in this version. Released as part of CIMCO Software version 5.12.16
CIMCO Edit 5.12.15 PreviewReleased: 19-10-08
Changes since previous version:
CIMCO Edit 5.12.15
  • Added option to allow only administrators access to the NC-Base system log. Ref: Database/Setup/Server/Other/System log only visible to administrators
  • Added NC-Base user group permission to determine if the user is allowed to edit File Notes. Ref: Database/Setup/User Groups/Edit File Notes
CIMCO Edit 5.12.14 PreviewReleased: 16-10-08
Changes since previous version:
CIMCO Edit 5.12.14
  • Fixed macro calculation error when specifying an input value starting with .
CIMCO Edit 5.12.13 PreviewReleased: 16-10-08
Changes since previous version:
CIMCO Edit 5.12.13
  • Added option to send files store with non-standard linefeed characters like 13,10,10 etc. Ref: 'Send files with non-standard CR/LF'
  • Added option to hide NC-Assistant formula results. Ref: Setup/Global/Hide NC-Assistant formula results
  • Added support for using the 'As Specified' for the number of decimals used when outputting formula results.
  • Updated CNC-Calc.
  • Fixed problem with locked status being exported wrong when exporting NC-Base program list.
  • Fixed problem opening .DXF files in CNC-Calc from Windows Explorer.
  • Fixed problem when restoring old backups without program information and the 'Backup program information' option was enabled.
  • Fixed problem with the macro parameter 'Digits' when 'As Specified' what selected for the number of decimals.
CIMCO Edit 5.12.12 PreviewReleased: 14-10-08
Changes since previous version:
CIMCO Edit 5.12.12
  • Fixed problem updating file after updating program info when adding a new program to NC-Base.
  • Fixed incorrect NC-Base 'Programs Must be Checked' message.
CIMCO Edit 5.12.11 PreviewReleased: 08-10-08
Changes since previous version:
CIMCO Edit 5.12.11
  • No changes in this version. Released as part of CIMCO Software version 5.12.11
CIMCO Edit 5.12.10 PreviewReleased: 07-10-08
Changes since previous version:
CIMCO Edit 5.12.10
  • Fixed problem selecting a directory in the directory browser dialog.
CIMCO Edit 5.12.09 PreviewReleased: 06-10-08
Changes since previous version:
CIMCO Edit 5.12.09
  • No changes in this version. Released as part of CIMCO Software version 5.12.09
CIMCO Edit 5.12.08 PreviewReleased: 05-10-08
Changes since previous version:
CIMCO Edit 5.12.08
  • No changes in this version. Released as part of CIMCO Software version 5.12.08
CIMCO Edit 5.12.07 PreviewReleased: 02-10-08
Changes since previous version:
CIMCO Edit 5.12.07
  • No changes in this version. Released as part of CIMCO Software version 5.12.07
CIMCO Edit 5.12.06 PreviewReleased: 01-10-08
Changes since previous version:
CIMCO Edit 5.12.06
  • No changes in this version. Released as part of CIMCO Software version 5.12.06
CIMCO Edit 5.12.05 PreviewReleased: 29-09-08
Changes since previous version:
CIMCO Edit 5.12.05
  • Updated Mazak Mazatrol viewer.
CIMCO Edit 5.12.04 PreviewReleased: 22-09-08
Changes since previous version:
CIMCO Edit 5.12.04
  • No changes in this version. Released as part of CIMCO Software version 5.12.04
CIMCO Edit 5.12.03 PreviewReleased: 19-09-08
Changes since previous version:
CIMCO Edit 5.12.03
  • No changes in this version. Released as part of CIMCO Software version 5.12.03
CIMCO Edit 5.12.02 PreviewReleased: 18-09-08
Changes since previous version:
CIMCO Edit 5.12.02
  • No changes in this version. Released as part of CIMCO Software version 5.12.02
CIMCO Edit 5.12.01 PreviewReleased: 15-09-08
Changes since previous version:
CIMCO Edit 5.12.01
  • Updated CNC-Calc.
CIMCO Edit 5.11.99 PreviewReleased: 12-09-08
Changes since previous version:
CIMCO Edit 5.11.99
  • Updated back plot.
CIMCO Edit 5.11.98 PreviewReleased: 11-09-08
Changes since previous version:
CIMCO Edit 5.11.98
  • Fixed crash when starting editor if an invalid macro was defined.
  • Fixed problem defining macros that used input parameters in formulas only.
CIMCO Edit 5.11.97 PreviewReleased: 10-09-08
Changes since previous version:
CIMCO Edit 5.11.97
  • Updated Back plot view buttons for G18/G19 views.
CIMCO Edit 5.11.96 PreviewReleased: 08-09-08
Changes since previous version:
CIMCO Edit 5.11.96
  • No changes in this version. Released as part of CIMCO Software version 5.11.96
CIMCO Edit 5.11.95 PreviewReleased: 03-09-08
Changes since previous version:
CIMCO Edit 5.11.95
  • Fixed incorrect help text for info variables on the macro setup page.
  • Fixed automatic language selecting problem in the NC-Base server.
  • Fixed problem opening some large associated files from NC-Base.
CIMCO Edit 5.11.94 PreviewReleased: 26-08-08
Changes since previous version:
CIMCO Edit 5.11.94
  • Added 'Add Function' and 'Add User Input' buttons to the macro setup dialog.
  • Fixed OEM installation problem.
CIMCO Edit 5.11.93 PreviewReleased: 25-08-08
Changes since previous version:
CIMCO Edit 5.11.93
  • Updated CNC-Calc.
  • Updated NC-Base tool list.
  • Added constant 'PI' to NC-Assistant formulas.
CIMCO Edit 5.11.92 PreviewReleased: 21-08-08
Changes since previous version:
CIMCO Edit 5.11.92
  • Added support for formulas in the NC-Assistant.
  • Updated CNC-Calc.
CIMCO Edit 5.11.91 PreviewReleased: 20-08-08
Changes since previous version:
CIMCO Edit 5.11.91
  • Updated CNC-Calc.
CIMCO Edit 5.11.90 PreviewReleased: 13-08-08
Changes since previous version:
CIMCO Edit 5.11.90
  • No changes in this version. Released as part of CIMCO Software version 5.11.90
CIMCO Edit 5.11.89 PreviewReleased: 13-08-08
Changes since previous version:
CIMCO Edit 5.11.89
  • Updated CNC-Calc.
  • Fixed problem printing in some cases when NC-Base header print was active.
CIMCO Edit 5.11.88 PreviewReleased: 05-08-08
Changes since previous version:
CIMCO Edit 5.11.88
  • Updated CNC-Calc.
CIMCO Edit 5.11.87 PreviewReleased: 01-08-08
Changes since previous version:
CIMCO Edit 5.11.87
  • Updated CNC-Calc.
  • Fixed Japanese font issue on NC-Assistant balloons.
CIMCO Edit 5.11.86 PreviewReleased: 31-07-08
Changes since previous version:
CIMCO Edit 5.11.86
  • No changes in this version. Released as part of CIMCO Software version 5.11.86
CIMCO Edit 5.11.85 PreviewReleased: 30-07-08
Changes since previous version:
CIMCO Edit 5.11.85
  • Fixed Japanese font issue on the back plot tool list.
CIMCO Edit 5.11.84 PreviewReleased: 29-07-08
Changes since previous version:
CIMCO Edit 5.11.84
  • No changes in this version. Released as part of CIMCO Software version 5.11.84
CIMCO Edit 5.11.83 PreviewReleased: 25-07-08
Changes since previous version:
CIMCO Edit 5.11.83
  • No changes in this version. Released as part of CIMCO Software version 5.11.83
CIMCO Edit 5.11.82 PreviewReleased: 22-07-08
Changes since previous version:
CIMCO Edit 5.11.82
  • Updated back plot.
  • Fixed problem with 360 degrees arcs in CNC-Calc.
CIMCO Edit 5.11.81 PreviewReleased: 17-07-08
Changes since previous version:
CIMCO Edit 5.11.81
  • Added option to print file modified time, database modified time and 'Modified by' on NC-Base print headers. Ref: Database/Setup/Server Settings/Printing
  • Updated CNC-Calc.
CIMCO Edit 5.11.80 PreviewReleased: 15-07-08
Changes since previous version:
CIMCO Edit 5.11.80
  • Updated back plot.
  • Updated CNC-Calc.
CIMCO Edit 5.11.79 PreviewReleased: 07-07-08
Changes since previous version:
CIMCO Edit 5.11.79
  • Added option in CNC-Calc to specify maximum angle of generated arcs.
  • Updated back plot.
  • Reduce Editor startup time.
  • Fixed problem with overwriting DXF files in CNC-Calc.
CIMCO Edit 5.11.78 PreviewReleased: 26-06-08
Changes since previous version:
CIMCO Edit 5.11.78
  • Updated CNC-Calc.
  • Fixed problem with the back plot background 'No Gradient' option being inverted.
CIMCO Edit 5.11.77 PreviewReleased: 19-06-08
Changes since previous version:
CIMCO Edit 5.11.77
  • Added option to disable gradient backgrounds in the back plot. Ref: Setup/Global Setup/Global Colors/No Gradient
CIMCO Edit 5.11.76 PreviewReleased: 18-06-08
Changes since previous version:
CIMCO Edit 5.11.76
  • No changes in this version. Released as part of CIMCO Software version 5.11.76
CIMCO Edit 5.11.75 PreviewReleased: 13-06-08
Changes since previous version:
CIMCO Edit 5.11.75
  • Fixed Heidenhain CYCL 7 back plot issue.
CIMCO Edit 5.11.74 PreviewReleased: 11-06-08
Changes since previous version:
CIMCO Edit 5.11.74
  • No changes in this version. Released as part of CIMCO Software version 5.11.74
CIMCO Edit 5.11.73 PreviewReleased: 10-06-08
Changes since previous version:
CIMCO Edit 5.11.73
  • Updated back plot.
  • Updated CNC-Calc.
CIMCO Edit 5.11.72 PreviewReleased: 02-06-08
Changes since previous version:
CIMCO Edit 5.11.72
  • Updated back plot.
  • Updated CNC-Calc.
CIMCO Edit 5.11.71 PreviewReleased: 23-05-08
Changes since previous version:
CIMCO Edit 5.11.71
  • Fixed back plot toolbar problem (introduced in 5.11.70).
CIMCO Edit 5.11.70 PreviewReleased: 22-05-08
Changes since previous version:
CIMCO Edit 5.11.70
  • Added Cancel button on the base directory move dialog.
  • Updated back plot.
  • Fixed crash in some cases when using the /plot & /minimalplot options.
CIMCO Edit 5.11.69 PreviewReleased: 15-05-08
Changes since previous version:
CIMCO Edit 5.11.69
  • Updated back plot.
CIMCO Edit 5.11.68 PreviewReleased: 07-05-08
Changes since previous version:
CIMCO Edit 5.11.68
  • Updated back plot.
CIMCO Edit 5.11.67 PreviewReleased: 01-05-08
Changes since previous version:
CIMCO Edit 5.11.67
  • No changes in this version. Released as part of CIMCO Software version 5.11.67
CIMCO Edit 5.11.66 PreviewReleased: 23-04-08
Changes since previous version:
CIMCO Edit 5.11.66
  • Added button to start the Windows Calculator.
  • Updated CNC-Calc.
  • Fixed problem with measuring in back plot turning mode.
CIMCO Edit 5.11.65 PreviewReleased: 09-04-08
Changes since previous version:
CIMCO Edit 5.11.65
  • Added keyboard shortcut to upper case text (CTRL+U).
  • Updated CNC-Calc.
  • Updated back plot.
CIMCO Edit 5.11.64 PreviewReleased: 02-04-08
Changes since previous version:
CIMCO Edit 5.11.64
  • Removed 'Max column indicator' from Mazatrol previews.
CIMCO Edit 5.11.63 PreviewReleased: 31-03-08
Changes since previous version:
CIMCO Edit 5.11.63
  • Updated installation.
CIMCO Edit 5.11.62 PreviewReleased: 29-03-08
Changes since previous version:
CIMCO Edit 5.11.62
  • Added support for sending files opened in the editor directly to DNC-Max. Ref: Setup/DNC-Max Client/Allow users to send 'Local Files'
  • Added option to send files stored on the client PC to DNC-Max Ref: Setup/DNC-Max Client/Allow users to send 'Local Files' Ref: DNC-Max Client/Send Data in Current Window
  • Updated CNC-Calc.
CIMCO Edit 5.11.61 PreviewReleased: 24-03-08
Changes since previous version:
CIMCO Edit 5.11.61
  • Updated CNC-Calc.
  • Improved NC-Assistant layout.
CIMCO Edit 5.11.60 PreviewReleased: 18-03-08
Changes since previous version:
CIMCO Edit 5.11.60
  • Added option to the NC-Assistant to not insert empty lines when a parameter was not specified. Ref: NC Functions/Macro Setup/Do not insert empty lines
  • Changed NC-Assistant to scale input fields to fit text lengths.
  • Updated CNC-Calc.
  • Updated back plot.
CIMCO Edit 5.11.59 PreviewReleased: 09-03-08
Changes since previous version:
CIMCO Edit 5.11.59
  • Added option to specify NC-Base tool trigger as an advanced trigger.
  • Updated back plot.
  • Updated CNC-Calc.
  • Fixed problem backing up deleted files in NC-Base that were moved to the offline folder.
  • Fixed problem with the NC-Base integrity check showing an incorrect 'File deleted' message.
CIMCO Edit 5.11.58 PreviewReleased: 05-03-08
Changes since previous version:
CIMCO Edit 5.11.58
  • Updated back plot.
CIMCO Edit 5.11.57 PreviewReleased: 03-03-08
Changes since previous version:
CIMCO Edit 5.11.57
  • Added support for specifying alternate names for NC commands in the back plot. Ref: Setup/Back plot/Map letters
  • Added option to specify the directory uses to store delete files in NC-Base. Ref: Database/Setup/Server Setting/Other/Delete files directory
  • Updated back plot MillPlus, Fagor and Haas support.
  • Fixed problem with tool paths not always shown in the back plot.
CIMCO Edit 5.11.56 PreviewReleased: 25-02-08
Changes since previous version:
CIMCO Edit 5.11.56
  • Added option to disable Editor modules from the command line. Disable NC-Base by specifying /NOBASE on the command line. Disable CNC-Calc by specifying /NOCALC on the command line. Disable Back plot by specifying /NOPLOT on the command line. Disable Back plot by specifying /NOPLOT on the command line. Disable Math/Macros by specifying /NONC on the command line.
  • Added Cutoff in CNC-Calc turning.
  • Changed CNC-Calc to add files to the recent list when opening a file.
  • Added field in the NC-Base Advanced search options to search all fields in the database.
  • Added option to disable NC-Base by specifying /NOBASE on the command line.
  • Fixed problem generating NC-Base version reports.
CIMCO Edit 5.11.55 PreviewReleased: 18-02-08
Changes since previous version:
CIMCO Edit 5.11.55
  • Added option to Copy / Paste program info in NC-Base. Ref: Right Click/Copy Program Info Ref: Right Click/Paste Program Info
  • Updated NC-Base tool list generator.
  • Fixed problem with the 'Confirm Program Exit' option.
CIMCO Edit 5.11.54 PreviewReleased: 11-02-08
Changes since previous version:
CIMCO Edit 5.11.54
  • Fixed crash when file contained very long macros.
CIMCO Edit 5.11.53 PreviewReleased: 10-02-08
Changes since previous version:
CIMCO Edit 5.11.53
  • Updated CNC-Calc.
CIMCO Edit 5.11.52 PreviewReleased: 04-02-08
Changes since previous version:
CIMCO Edit 5.11.52
  • Added option to restart block numbers on lines starting with the specified trigger. Ref: Setup/Block Numbers/Restart on lines starting with
CIMCO Edit 5.11.51 PreviewReleased: 03-02-08
Changes since previous version:
CIMCO Edit 5.11.51
  • No changes in this version. Released as part of CIMCO Software version 5.11.51
CIMCO Edit 5.11.50 PreviewReleased: 29-01-08
Changes since previous version:
CIMCO Edit 5.11.50
  • Added thousand separator to line number and file size indicator.
  • Updated CNC-Calc.
  • Fixed crash in CNC-Calc when loading threading parameter file.
  • Fixed problem when adding file to NC-Base that was located in the program directory but not using the same drive specification as the destination file.
CIMCO Edit 5.11.49 PreviewReleased: 15-01-08
Changes since previous version:
CIMCO Edit 5.11.49
  • No changes in this version. Released as part of CIMCO Software version 5.11.49
CIMCO Edit 5.11.48 PreviewReleased: 10-01-08
Changes since previous version:
CIMCO Edit 5.11.48
  • Added threading in CNC-Calc turning.
CIMCO Edit 5.11.47 PreviewReleased: 07-01-08
Changes since previous version:
CIMCO Edit 5.11.47
  • No changes in this version. Released as part of CIMCO Software version 5.11.47
CIMCO Edit 5.11.46 PreviewReleased: 19-12-07
Changes since previous version:
CIMCO Edit 5.11.46
  • Added 'Save' button to the Mini DNC receive dialog.
CIMCO Edit 5.11.45 PreviewReleased: 03-12-07
Changes since previous version:
CIMCO Edit 5.11.45
  • No changes in this version. Released as part of CIMCO Software version 5.11.45
CIMCO Edit 5.11.44 PreviewReleased: 30-11-07
Changes since previous version:
CIMCO Edit 5.11.44
  • Added grooving support in CNC-Calc turning.
  • Fixed problem receiving files with the CIMCODNC.EXE utility.
CIMCO Edit 5.11.43 PreviewReleased: 20-11-07
Changes since previous version:
CIMCO Edit 5.11.43
  • Updated CNC-Calc.
  • Updated back plot.
CIMCO Edit 5.11.42 PreviewReleased: 15-11-07
Changes since previous version:
CIMCO Edit 5.11.42
  • Fixed crash when generating a version report (introduced in 5.11.40).
CIMCO Edit 5.11.41 PreviewReleased: 15-11-07
Changes since previous version:
CIMCO Edit 5.11.41
  • Fixed crash when creating a new file (introduced in 5.11.40).
CIMCO Edit 5.11.40 PreviewReleased: 14-11-07
Changes since previous version:
CIMCO Edit 5.11.40
  • Added error message when trying to copy a NC-Base program to it self.
  • Added support for generating 'Version Reports' in NC-Base.
CIMCO Edit 5.11.39 PreviewReleased: 09-11-07
Changes since previous version:
CIMCO Edit 5.11.39
  • Added option to specify a range for the values that should be updated when modifying the feed/speed of a program.
  • Back plot updated.
  • Fixed problem with find next/previous tool change with some machine types.
CIMCO Edit 5.11.38 PreviewReleased: 05-11-07
Changes since previous version:
CIMCO Edit 5.11.38
  • Updated back plot.
  • Updated CNC-Calc.
CIMCO Edit 5.11.37 PreviewReleased: 01-11-07
Changes since previous version:
CIMCO Edit 5.11.37
  • Updated CNC-Calc.
CIMCO Edit 5.11.36 PreviewReleased: 28-10-07
Changes since previous version:
CIMCO Edit 5.11.36
  • Updated CNC-Calc.
CIMCO Edit 5.11.35 PreviewReleased: 19-10-07
Changes since previous version:
CIMCO Edit 5.11.35
  • No changes in this version. Released as part of CIMCO Software version 5.11.35
CIMCO Edit 5.11.34 PreviewReleased: 15-10-07
Changes since previous version:
CIMCO Edit 5.11.34
  • Added column in NC-Base view to show if import is waiting.
  • Updated CNC-Calc.
  • Changed NC-Base to lock existing program when adding a program to the import queue and 'Lock All' is selected.
CIMCO Edit 5.11.33 PreviewReleased: 11-10-07
Changes since previous version:
CIMCO Edit 5.11.33
  • Added name of machine that send/received a file to the NC-Base log.
  • Updated CNC-Calc.
  • Fixed problem with , being replaced with . just after pressing decimal character on the numeric keypad.
CIMCO Edit 5.11.32 PreviewReleased: 28-09-07
Changes since previous version:
CIMCO Edit 5.11.32
  • No changes in this version. Released as part of CIMCO Software version 5.11.32
CIMCO Edit 5.11.31 PreviewReleased: 24-09-07
Changes since previous version:
CIMCO Edit 5.11.31
  • Increased length of Search / Replace strings.
  • Fixed problem with the auto save option when using NC-Base.
CIMCO Edit 5.11.30 PreviewReleased: 13-09-07
Changes since previous version:
CIMCO Edit 5.11.30
  • No changes in this version. Released as part of CIMCO Software version 5.11.30
CIMCO Edit 5.11.29 PreviewReleased: 13-09-07
Changes since previous version:
CIMCO Edit 5.11.29
  • Added support for extracting Mazak Matrix program comments in NC-Base.
  • Added option to specify a 'From address' in the NC-Base backup server.
CIMCO Edit 5.11.28 PreviewReleased: 07-09-07
Changes since previous version:
CIMCO Edit 5.11.28
  • Fixed problem updating NC-Base when opening database files from Windows Explorer
CIMCO Edit 5.11.27 PreviewReleased: 07-09-07
Changes since previous version:
CIMCO Edit 5.11.27
  • No changes in this version. Released as part of CIMCO Software version 5.11.27
CIMCO Edit 5.11.26 PreviewReleased: 06-09-07
Changes since previous version:
CIMCO Edit 5.11.26
  • No changes in this version. Released as part of CIMCO Software version 5.11.26
CIMCO Edit 5.11.25 PreviewReleased: 04-09-07
Changes since previous version:
CIMCO Edit 5.11.25
  • No changes in this version. Released as part of CIMCO Software version 5.11.25
CIMCO Edit 5.11.24 PreviewReleased: 03-09-07
Changes since previous version:
CIMCO Edit 5.11.24
  • Updated CNC-Calc.
CIMCO Edit 5.11.23 PreviewReleased: 27-08-07
Changes since previous version:
CIMCO Edit 5.11.23
  • Updated CNC-Calc.
CIMCO Edit 5.11.22 PreviewReleased: 20-08-07
Changes since previous version:
CIMCO Edit 5.11.22
  • Added command line option to select the language: /lang=XX
  • Fixed problem Adding/Updating the NC-Base memo file.
CIMCO Edit 5.11.21 PreviewReleased: 01-08-07
Changes since previous version:
CIMCO Edit 5.11.21
  • Added option enable/disable print of header on the first page. Ref: Setup/Printer Setup/Print header on first page
  • Increased maximum number of lines in macros to 2000.
  • Updated CNC-Calc.
  • Fixed problem with CNC-Calc diameter programming.
  • Fixed problem detecting corrupted Unicode files.
  • Fixed problem when printing the filename on the NC-Base print header.
  • Fixed problem with auto import creating temporary files when importing information from an associated file, and the associated file was not found.
CIMCO Edit 5.11.20 PreviewReleased: 18-07-07
Changes since previous version:
CIMCO Edit 5.11.20
  • Added 'Yes To All' / 'No To All' when updating NC-Base associated files.
  • Updated NC-Base tool list generator.
  • Fixed problem with the CNC-Calc toolbars.
  • Fixed problem receiving file into existing window.
CIMCO Edit 5.11.19 PreviewReleased: 17-07-07
Changes since previous version:
CIMCO Edit 5.11.19
  • Updated CNC-Calc.
  • Fixed problem opening files in the editor when clicking on a file in the DNC-Max client log inside CIMCO Edit.
  • Fixed problem associating setup/tool/memo files in some cases.
  • Fixed crash when previewing some files in NC-Base.
CIMCO Edit 5.11.18 PreviewReleased: 01-07-07
Changes since previous version:
CIMCO Edit 5.11.18
  • No changes in this version. Released as part of CIMCO Software version 5.11.18
CIMCO Edit 5.11.17 PreviewReleased: 28-06-07
Changes since previous version:
CIMCO Edit 5.11.17
  • MDC-Max update.
CIMCO Edit 5.11.16 PreviewReleased: 24-06-07
Changes since previous version:
CIMCO Edit 5.11.16
  • Updated back plot.
CIMCO Edit 5.11.15 PreviewReleased: 18-06-07
Changes since previous version:
CIMCO Edit 5.11.15
  • No changes in this version. Released as part of CIMCO Software version 5.11.15
CIMCO Edit 5.11.14 PreviewReleased: 13-06-07
Changes since previous version:
CIMCO Edit 5.11.14
  • Updated CNC-Calc.
CIMCO Edit 5.11.13 PreviewReleased: 12-06-07
Changes since previous version:
CIMCO Edit 5.11.13
  • Added support for specifying multiple 'Field Folders' in NC-Base. Ref: Database/Setup/Server Settings/Other
  • Updated CNC-Calc.
CIMCO Edit 5.11.12 PreviewReleased: 31-05-07
Changes since previous version:
CIMCO Edit 5.11.12
  • Updated back plot.
  • Updated CNC-Calc.
  • Fixed problem importing some DXF files in CNC-Calc.
CIMCO Edit 5.11.11 PreviewReleased: 14-05-07
Changes since previous version:
CIMCO Edit 5.11.11
  • Updated CNC-Calc.
CIMCO Edit 5.11.10 PreviewReleased: 11-05-07
Changes since previous version:
CIMCO Edit 5.11.10
  • Updated CNC-Calc.
CIMCO Edit 5.11.09 PreviewReleased: 10-05-07
Changes since previous version:
CIMCO Edit 5.11.09
  • No changes in this version. Released as part of CIMCO Software version 5.11.09
CIMCO Edit 5.11.08 PreviewReleased: 07-05-07
Changes since previous version:
CIMCO Edit 5.11.08
  • Updated back plot.
  • Fixed problem with CNC-Calc diameter programming.
CIMCO Edit 5.11.07 PreviewReleased: 18-04-07
Changes since previous version:
CIMCO Edit 5.11.07
  • MDC-Max update.
CIMCO Edit 5.11.06 PreviewReleased: 15-04-07
Changes since previous version:
CIMCO Edit 5.11.06
  • Updated CNC-Calc.
CIMCO Edit 5.11.05 PreviewReleased: 05-04-07
Changes since previous version:
CIMCO Edit 5.11.05
  • Fixed problem with the CNC-Calc contour.
CIMCO Edit 5.11.04 PreviewReleased: 02-04-07
Changes since previous version:
CIMCO Edit 5.11.04
  • Updated CNC-Calc.
CIMCO Edit 5.11.03 PreviewReleased: 29-03-07
Changes since previous version:
CIMCO Edit 5.11.03
  • Added option to specify alternate block number character. Ref: Setup/Block Numbers/Alternate block number character
CIMCO Edit 5.11.02 PreviewReleased: 28-03-07
Changes since previous version:
CIMCO Edit 5.11.02
  • MDC-Max update.
CIMCO Edit 5.11.01 PreviewReleased: 26-03-07
Changes since previous version:
CIMCO Edit 5.11.01
  • No changes in this version. Released as part of CIMCO Software version 5.11.01
CIMCO Edit 5.10.99 PreviewReleased: 20-03-07
Changes since previous version:
CIMCO Edit 5.10.99
  • Updated CNC-Calc.
CIMCO Edit 5.10.98 PreviewReleased: 16-03-07
Changes since previous version:
CIMCO Edit 5.10.98
  • Updated NC-Base program/file log.
  • Updated CNC-Calc.
  • Fixed problem with file notes when auto importing existing associated files into NC-Base.
  • Fixed problem with the option to keep version number when changing status.
CIMCO Edit 5.10.97 PreviewReleased: 12-03-07
Changes since previous version:
CIMCO Edit 5.10.97
  • Added option to always use CIMCO Edit when opening NC-Base program files. Ref: Database/Setup/Client Settings/Disable external editors for programs
CIMCO Edit 5.10.96 PreviewReleased: 11-03-07
Changes since previous version:
CIMCO Edit 5.10.96
  • Added option to change the program name when accepting imported NC-Base programs using 'Accept Import File As'.
  • Updated DNC to prompt users to discard files received with errors.
  • Updated CNC-Calc.
  • Updated back plot.
  • Fixed problem with the DNC recently received file list.
  • Fixed problem with the NC-Base backup purge function not active.
CIMCO Edit 5.10.95 PreviewReleased: 03-03-07
Changes since previous version:
CIMCO Edit 5.10.95
  • Added NC-Base option to limit the number of time a file can be send. Ref: Database/Setup/Server Settings/Advanced/Use 'Transfer Limit Counter'
  • Fixed problem generating pocket and contour operations in CNC-Calc.
CIMCO Edit 5.10.94 PreviewReleased: 20-02-07
Changes since previous version:
CIMCO Edit 5.10.94
  • Added automatic backup when manually receiving into NC-Base using the editor DNC.
  • Fixed problem with the 'Restore Latest Version' button not working.
CIMCO Edit 5.10.93 PreviewReleased: 13-02-07
Changes since previous version:
CIMCO Edit 5.10.93
  • Added option to disable storing editor file types in NC-Base. Ref: Database/Setup/Server Settings/Do not store editor file types in db
  • Added option to keep version number when changing status. Ref: Database/Setup/Server Settings/Logging/ No new version when setting status
  • Updated CNC-Calc
CIMCO Edit 5.10.92 PreviewReleased: 11-02-07
Changes since previous version:
CIMCO Edit 5.10.92
  • Added support for receiving files into NC-Base when using the Editor DNC.
  • Updated CNC-Calc.
  • Changed NC-Base add program dialog to use values from existing program when replacing with a new program.
  • Changed 'Tool Change' command to allow specifying M6 etc.
  • Fixed problem with the 'Remember last cursor position'
  • Fixed crash when loading file when using some languages.
CIMCO Edit 5.10.91 PreviewReleased: 29-01-07
Changes since previous version:
CIMCO Edit 5.10.91
  • No changes in this version. Released as part of CIMCO Software version 5.10.91
CIMCO Edit 5.10.90 PreviewReleased: 27-01-07
Changes since previous version:
CIMCO Edit 5.10.90
  • Added CNC-Calc turning roughing cycles.
  • Fixed problem running external converters on files on the import queue.
CIMCO Edit 5.10.89 PreviewReleased: 23-01-07
Changes since previous version:
CIMCO Edit 5.10.89
  • Changed files on the NC-Base import queue to read/write.
  • Fixed problem with updating the NC-Base program info from the file. (Introduced in 5.10.86).
  • Fixed NC-Base version problem with associated files.
  • Fixed problem updating customer information when renaming a program on the import queue.
CIMCO Edit 5.10.88 PreviewReleased: 18-01-07
Changes since previous version:
CIMCO Edit 5.10.88
  • Added support for undoing string replace operations on large files.
  • Fixed problem with the 'Match string' option in the insert/remove string feature.
CIMCO Edit 5.10.87 PreviewReleased: 16-01-07
Changes since previous version:
CIMCO Edit 5.10.87
  • Added option to search for regular expressions with the insert/remove string feature.
CIMCO Edit 5.10.86 PreviewReleased: 15-01-07
Changes since previous version:
CIMCO Edit 5.10.86
  • Added support for saving files under a sub-directory named after one of the NC-Base fields. Ref: Database/Setup/Server Settings/Use Field Folders
  • Added option to synchronize the program created/modified time with the created/modified time of the associated program file. Ref: Database/Setup/Maintenance/Set Modified Date Ref: Database/Setup/Maintenance/Set Created Date
  • Updated DXF reader in CNC-Calc.
  • Updated back plot.
  • Fixed problem changing customer multiple times when adding a program to NC-Base using customer folder.
  • Fixed problem updating customer folders when changing machine group.
  • Fixed problem updating program info when overwriting an existing program in NC-Base.
  • Fixed problem copying associated files between programs.
  • Fixed NC-Base version problem with programs on the import/approval queue.
CIMCO Edit 5.10.85 PreviewReleased: 29-12-06
Changes since previous version:
CIMCO Edit 5.10.85
  • Updated back plot.
  • Fixed problem modifying the name of programs on the import queue.
CIMCO Edit 5.10.84 PreviewReleased: 20-12-06
Changes since previous version:
CIMCO Edit 5.10.84
  • Added option to copy or link associated files in NC-Base.
  • Updated CNC-Calc.
  • Fixed problem using the NC-Base 'Update program info from file' and 'Update file info from program' options.
  • Fixed problem with buttons missing from NC-Base toolbar in some cases.
CIMCO Edit 5.10.83 PreviewReleased: 04-12-06
Changes since previous version:
CIMCO Edit 5.10.83
  • Added support for saving file compare result to a file.
CIMCO Edit 5.10.82 PreviewReleased: 03-12-06
Changes since previous version:
CIMCO Edit 5.10.82
  • Added option to restore NC-Base SQL dump files.
  • Added support for renaming programs on the NC-Base import queue.
  • Updated back plot.
  • Fixed problem opening import files when more than one import per program was enabled.
CIMCO Edit 5.10.81 PreviewReleased: 26-11-06
Changes since previous version:
CIMCO Edit 5.10.81
  • Updated back plot.
CIMCO Edit 5.10.80 PreviewReleased: 23-11-06
Changes since previous version:
CIMCO Edit 5.10.80
  • Added support for extracting Mazatrol program/work numbers in the NC-Base program format setup. Ref: Database/Setup/Machine/Program Format/Extract From : Mazak ...
  • Added support for sending multiple programs from NC-Base.
  • Added option to use wildcards in NC-Base program searches only. Ref: Database/Setup/Client Settings/Search Settings/ Always use wildcard in program searches
  • Updated CNC-Calc.
  • Updated back plot.
  • Fixed problem sorting by part number when using the NC-Base Family of parts options with MS SQL.
  • Fixed problem when NC-Base only an end trigger was specified in the program format setup.
  • Fixed problem with NC-Base program version updated when saving an unchanged file.
CIMCO Edit 5.10.79 PreviewReleased: 10-11-06
Changes since previous version:
CIMCO Edit 5.10.79
  • Updated CNC-Calc.
  • Fixed misleading NC-Base log entry when received file was read-only.
  • Fixed problem when NC-Base auto logout was performed and one or more files were open.
  • Fixed crash in the CNC-Calc pocket operation.
  • Fixed crash in the CNC-Calc facing operation.
CIMCO Edit 5.10.78 PreviewReleased: 04-11-06
Changes since previous version:
CIMCO Edit 5.10.78
  • Internal release.
CIMCO Edit 5.10.77 PreviewReleased: 01-11-06
Changes since previous version:
CIMCO Edit 5.10.77
  • No changes in this version. Released as part of CIMCO Software version 5.10.77
CIMCO Edit 5.10.76 PreviewReleased: 01-11-06
Changes since previous version:
CIMCO Edit 5.10.76
  • Added message in NC-Base to confirm rejection of imported programs.
  • Updated CNC-Calc
  • Updated Back plot
  • Fixed crash when using 'Close other windows' on Back plot or CNC-Calc tab.
CIMCO Edit 5.10.75 PreviewReleased: 30-10-06
Changes since previous version:
CIMCO Edit 5.10.75
  • No changes in this version. Released as part of CIMCO Software version 5.10.75
CIMCO Edit 5.10.74 PreviewReleased: 29-10-06
Changes since previous version:
CIMCO Edit 5.10.74
  • Added additional turning functions to CNC-Calc.
  • Fixed CNC-Calc compensation problem.
CIMCO Edit 5.10.73 PreviewReleased: 29-10-06
Changes since previous version:
CIMCO Edit 5.10.73
  • Internal release.
CIMCO Edit 5.10.72 PreviewReleased: 23-10-06
Changes since previous version:
CIMCO Edit 5.10.72
  • No changes in this version. Released as part of CIMCO Software version 5.10.72
CIMCO Edit 5.10.71 PreviewReleased: 11-10-06
Changes since previous version:
CIMCO Edit 5.10.71
  • Changed file dialog to preserve the file case to prevent problems when selecting files stored on UNIX file servers.
CIMCO Edit 5.10.70 PreviewReleased: 04-10-06
Changes since previous version:
CIMCO Edit 5.10.70
  • Added option to specify the locations of the machine type configuration files (*.mac). Ref: Setup/Global/Plugins/Type file path
  • Changed NC-Base to prevent user from overwriting existing read-only programs when adding a new program unless the user has permissions to set programs read-write.
  • Updated back plot.
CIMCO Edit 5.10.69 PreviewReleased: 28-09-06
Changes since previous version:
CIMCO Edit 5.10.69
  • Updated back plot.
  • Fixed CNC-Calc crash.
  • Fixed problem with missing text on the NC-Base 'Add Program' dialog.
CIMCO Edit 5.10.68 PreviewReleased: 21-09-06
Changes since previous version:
CIMCO Edit 5.10.68
  • No changes in this version. Released as part of CIMCO Software version 5.10.68
CIMCO Edit 5.10.67 PreviewReleased: 13-09-06
Changes since previous version:
CIMCO Edit 5.10.67
  • Fixed problem defining a new changed comment with the same description as a previously deleted comment.
CIMCO Edit 5.10.66 PreviewReleased: 10-09-06
Changes since previous version:
CIMCO Edit 5.10.66
  • Added support for importing multiple part numbers when using the NC-Base 'Family of parts' option.
  • Updated CNC-Calc.
  • Updated Back plot.
  • Changed the NC-Base setting 'Add new edit programs' to be a local configuration option.
  • Fixed problem auto importing NC-Base files into customer folders.
  • Fixed crash creating NC-Base tool lists.
  • Fixed problem with the path updating incorrectly when adding a new program to NC-Base.
  • Fixed problem with the 'Move program file to machine directory' on the NC-Base 'Add new program' dialog.
  • Fixed problem changing NC-Base password from the menu when no password was specified for the user.
  • Fixed problem specifying the 'Max line' value when using multi line NC-Base program information triggers.
CIMCO Edit 5.10.65 PreviewReleased: 29-08-06
Changes since previous version:
CIMCO Edit 5.10.65
  • Fixed problem moving NC-Base machine directory to/from a sub-directory.
CIMCO Edit 5.10.64 PreviewReleased: 27-08-06
Changes since previous version:
CIMCO Edit 5.10.64
  • Updated NC-Base client.
CIMCO Edit 5.10.63 PreviewReleased: 25-08-06
Changes since previous version:
CIMCO Edit 5.10.63
  • Updated OEM interface.
  • Updated NC-Base client.
CIMCO Edit 5.10.62 PreviewReleased: 20-08-06
Changes since previous version:
CIMCO Edit 5.10.62
  • Added option not to copy associated files when copying a program in NC-Base. Ref: Database/Setup/Server Settings/Advanced/Do not copy associated files on copy
  • Changed NC-Base program copy to prompt before copying/linking associated files.
  • Added support for deleting multiple backups from the NC-Base restore dialog.
  • Changed maximum number of NC-Base backups to 1000000.
  • Updated CNC-Calc (Maho)
  • Updated Back plot (Maho)
  • Fixed problem when moving NC-Base base directory, and one or more files were waiting on the import queue.
CIMCO Edit 5.10.61 PreviewReleased: 16-08-06
Changes since previous version:
CIMCO Edit 5.10.61
  • Added NC-Base 'Family of parts' option. Ref: Database/Setup/Server Settings/Advanced/Enable 'Family of parts'
  • Updated back plot.
  • Fixed problem with the NC-Base status changed to updated when auto receiving a file that was identical to the previous version.
CIMCO Edit 5.10.60 PreviewReleased: 16-08-06
Changes since previous version:
CIMCO Edit 5.10.60
  • Fixed problem exporting files to NC-Base. (Introduced in 5.10.57)
CIMCO Edit 5.10.59 PreviewReleased: 14-08-06
Changes since previous version:
CIMCO Edit 5.10.59
  • Added option to not increment the version number when adding an NC-Base change comment. Ref: Database/Setup/Server Settings/Logging/ No new version when adding comment
  • Fixed problem adding new pre-defined change comment in NC-Base.
  • Fixed problem with NC-Base not prompting for a change comment when editing the program file.
  • Fixed problem setting NC-Base version numbers when auto importing associated files.
CIMCO Edit 5.10.58 PreviewReleased: 10-08-06
Changes since previous version:
CIMCO Edit 5.10.58
  • Changed NC-Base to always set the read only attribute on associated when opening external files in read-only mode.
CIMCO Edit 5.10.57 PreviewReleased: 10-08-06
Changes since previous version:
CIMCO Edit 5.10.57
  • Added support for running an external command before opening a file.
  • Fixed NC-Base crash when editing program information etc.
CIMCO Edit 5.10.56 PreviewReleased: 05-08-06
Changes since previous version:
CIMCO Edit 5.10.56
  • No changes in this version. Released as part of CIMCO Software version 5.10.56
CIMCO Edit 5.10.55 PreviewReleased: 21-07-06
Changes since previous version:
CIMCO Edit 5.10.55
  • No changes in this version. Released as part of CIMCO Software version 5.10.55
CIMCO Edit 5.10.54 PreviewReleased: 20-07-06
Changes since previous version:
CIMCO Edit 5.10.54
  • Internal release.
CIMCO Edit 5.10.53 PreviewReleased: 17-07-06
Changes since previous version:
CIMCO Edit 5.10.53
  • Updated CNC-Calc.
  • Added option to move program file to the machine directory when copying NC-Base program to a different machine group and 'Allow files outside ...' was enabled.
  • Added option to make a new copy of the Setup/Tool/Memo files when using the NC-Base copy program function. Ref: Database/Setup/Server Settings/Advanced/ New Setup / Tool / Memo file on copy
  • Fixed problem with NC-Base setting name of associated setup/memo/tool file to the default value when updating file.
  • Fixed problem starting NC-Base server on some Windows 2003 systems.
CIMCO Edit 5.10.52 PreviewReleased: 09-07-06
Changes since previous version:
CIMCO Edit 5.10.52
  • Added option to extract NC-Base program information spanning multiple lines. Ref: Database/Setup/Machine/Program Format/Extract From : Multi Line
  • Updated OEM interface.
CIMCO Edit 5.10.51 PreviewReleased: 06-07-06
Changes since previous version:
CIMCO Edit 5.10.51
  • Updated back plot.
CIMCO Edit 5.10.50 PreviewReleased: 02-07-06
Changes since previous version:
CIMCO Edit 5.10.50
  • Updated back plot.
  • Removed message box when running external commands.
CIMCO Edit 5.10.49 PreviewReleased: 28-06-06
Changes since previous version:
CIMCO Edit 5.10.49
  • Fixed problem with incorrect page count when printing in raw format.
CIMCO Edit 5.10.48 PreviewReleased: 26-06-06
Changes since previous version:
CIMCO Edit 5.10.48
  • Added Okuma protocol.
CIMCO Edit 5.10.47 PreviewReleased: 22-06-06
Changes since previous version:
CIMCO Edit 5.10.47
  • Improved CNC-Calc turning support.
  • Fixed problem generating NC-Base tool list for some files.
  • Fixed problem using the compare function on the NC-Base restore dialog when 'Allow restore all' was enabled.
CIMCO Edit 5.10.46 PreviewReleased: 18-06-06
Changes since previous version:
CIMCO Edit 5.10.46
  • No changes in this version. Released as part of CIMCO Software version 5.10.46
CIMCO Edit 5.10.45 PreviewReleased: 14-06-06
Changes since previous version:
CIMCO Edit 5.10.45
  • Added option in NC-Base to allow users to restore the NC program and all associated documents in one operation. Ref: Database/Setup/Server Settings/Advanced/Allow 'Restore All'
CIMCO Edit 5.10.41 PreviewReleased: 01-06-06
Changes since previous version:
CIMCO Edit 5.10.41
  • No changes in this version. Released as part of CIMCO Software version 5.10.41
CIMCO Edit 5.10.40 PreviewReleased: 30-05-06
Changes since previous version:
CIMCO Edit 5.10.40
  • Updated NC-Base.
CIMCO Edit 5.10.39 PreviewReleased: 25-05-06
Changes since previous version:
CIMCO Edit 5.10.39
  • Updated NC-Base.
CIMCO Edit 5.10.38 PreviewReleased: 22-05-06
Changes since previous version:
CIMCO Edit 5.10.38
  • Updated NC-Base.
CIMCO Edit 5.10.37 PreviewReleased: 17-05-06
Changes since previous version:
CIMCO Edit 5.10.37
  • Updated CNC-Calc.
  • Fixed problem generating NC-Base tool list for some files.
CIMCO Edit 5.10.36 PreviewReleased: 08-05-06
Changes since previous version:
CIMCO Edit 5.10.36
  • Updated back plot. Notice: NC-Base updated - All NC-Base clients must be updated.
CIMCO Edit 5.10.35 PreviewReleased: 27-04-06
Changes since previous version:
CIMCO Edit 5.10.35
  • Updated OEM interface.
CIMCO Edit 5.10.34 PreviewReleased: 23-04-06
Changes since previous version:
CIMCO Edit 5.10.34
  • Updated OEM interface.
  • Updated back plot.
  • Fixed problem with some drill types in the solid simulation.
CIMCO Edit 5.10.33 PreviewReleased: 18-04-06
Changes since previous version:
CIMCO Edit 5.10.33
  • Updated CNC-Calc.
CIMCO Edit 5.10.32 PreviewReleased: 11-04-06
Changes since previous version:
CIMCO Edit 5.10.32
  • Updated back plot.
  • Updated CNC-Calc.
  • Updated NC-Base tool list generator.
  • Fixed problem with files sometimes set to read-only when using the 'Update files when updating program info' option.
  • Fixed problem with temp files (~CC*.TMP) sometimes created in the machine directories when using the 'Update files when updating program info' option.
CIMCO Edit 5.10.31 PreviewReleased: 29-03-06
Changes since previous version:
CIMCO Edit 5.10.31
  • Fixed problem opening multiple files from Windows Explorer.
CIMCO Edit 5.10.30 PreviewReleased: 22-03-06
Changes since previous version:
CIMCO Edit 5.10.30
  • Updated back plot.
  • Updated CNC-Calc.
  • Fixed problem printing file compare when the two files were identical.
CIMCO Edit 5.10.29 PreviewReleased: 13-03-06
Changes since previous version:
CIMCO Edit 5.10.29
  • Added CNC-Calc high speed pocket.
  • Fixed problem specifying NC-Base server name.
  • Fixed crash in License Key Manager.
CIMCO Edit 5.10.28 PreviewReleased: 03-03-06
Changes since previous version:
CIMCO Edit 5.10.28
  • Added option to keep specified number of decimals when inserting macro value.
  • Updated back plot.
  • Fixed problem inserting some macro values.
CIMCO Edit 5.10.27 PreviewReleased: 01-03-06
Changes since previous version:
CIMCO Edit 5.10.27
  • Added support for switching between multiple NC-Base servers.
  • Updated back plot.
  • Updated NC-Base tool list generator.
  • Fixed problem disabling the advanced simulation option.
  • Fixed problem creating MS SQL database. Notice: DNC-Max and NC-Base updated, clients needs to be updated.
CIMCO Edit 5.10.26 PreviewReleased: 02-02-06
Changes since previous version:
CIMCO Edit 5.10.26
  • Updated back plot.
  • Updated CNC-Calc.
  • Fixed problems with incorrect angle values in the tool path statistics.
  • Fixed problem with solid not loaded with some licenses.
  • Fixed problem specifying the 'Max Lines' value in the NC-Base program format setup.
CIMCO Edit 5.10.25 PreviewReleased: 17-01-06
Changes since previous version:
CIMCO Edit 5.10.25
  • Updated back plot.
  • Updated CNC-Calc.
CIMCO Edit 5.10.24 PreviewReleased: 16-01-06
Changes since previous version:
CIMCO Edit 5.10.24
  • Updated back plot.
CIMCO Edit 5.10.23 PreviewReleased: 15-01-06
Changes since previous version:
CIMCO Edit 5.10.23
  • Added option to export tool path statistics to a text file.
  • Added true type font support in CNC-Calc.
  • Fixed crash causing recently created/updated macros to be lost.
  • Fixed problem with the CNC-Calc pocket generation.
CIMCO Edit 5.10.22 PreviewReleased: 11-01-06
Changes since previous version:
CIMCO Edit 5.10.22
  • Fixed problem associating file types with NC-Base machines/groups.
CIMCO Edit 5.10.21 PreviewReleased: 05-01-06
Changes since previous version:
CIMCO Edit 5.10.21
  • Updated back plot.
  • Fixed problem generating tool list when importing programs with the NC-Base database converter.
CIMCO Edit 5.10.20 PreviewReleased: 03-01-06
Changes since previous version:
CIMCO Edit 5.10.20
  • Fixed problem previewing some jpeg files in the NC-Base client.
CIMCO Edit 5.10.19 PreviewReleased: 27-12-05
Changes since previous version:
CIMCO Edit 5.10.19
  • Fixed problems using the specified comment characters in the back plot.
CIMCO Edit 5.10.18 PreviewReleased: 14-12-05
Changes since previous version:
CIMCO Edit 5.10.18
  • Added option to disable auto refresh in the NC-Base preview window. Ref: Database/Setup/Client Settings/Disable preview auto refresh
  • Updated back plot.
  • Fixed crash closing editor when using NC-Base MS SQL link.
  • Fixed problem with Mark/Delete range activated by inserting a ' (hyphen).
CIMCO Edit 5.10.17 PreviewReleased: 10-12-05
Changes since previous version:
CIMCO Edit 5.10.17
  • Updated back plot.
CIMCO Edit 5.10.16 PreviewReleased: 06-12-05
Changes since previous version:
CIMCO Edit 5.10.16
  • Updated back plot.
  • Fixed editor focus problem.
  • Fixed problem with toolbars resetting.
CIMCO Edit 5.10.15 PreviewReleased: 28-11-05
Changes since previous version:
CIMCO Edit 5.10.15
  • Added option to force non-modal X/Y/Z values in rotate/mirror/...
  • Updated back plot.
  • Updated CNC-Calc.
  • Fixed problem adding NC-Base tool list in some cases.
  • Fixed problem specifying back plot tool prefix.
  • Fixed problem with the find next/previous tool change commands.
  • Fixed problem with files opened from another program not showing up on top.
CIMCO Edit 5.10.14 PreviewReleased: 22-11-05
Changes since previous version:
CIMCO Edit 5.10.14
  • Fixed problem with the tool path statistics not showing up on some systems.
  • Fixed CNC-Calc crash.
  • Fixed problem selecting output format in CNC-Calc.
CIMCO Edit 5.10.13 PreviewReleased: 21-11-05
Changes since previous version:
CIMCO Edit 5.10.13
  • Added tool path statistics function, including machining time and extent by tool.
  • Updated CNC-Calc.
  • Updated back plot, including fix for problem with back plot tool/holder sizes.
CIMCO Edit 5.10.12 PreviewReleased: 14-11-05
Changes since previous version:
CIMCO Edit 5.10.12
  • Updated NC-Base tool list generator.
  • Added editor OEM interface.
  • Added warning when using the 'Delete references to non-existing files' option in NC-Base.
CIMCO Edit 5.10.11 PreviewReleased: 09-11-05
Changes since previous version:
CIMCO Edit 5.10.11
  • Added support for creating pockets with islands in CNC-Calc.
  • Added support for left/right/center/ellipsis justifying variables.
  • Minor updates to the back plot.
CIMCO Edit 5.10.10 PreviewReleased: 02-11-05
Changes since previous version:
CIMCO Edit 5.10.10
  • Update CNC-Calc pocket.
  • Fixed CNC-Calc crash.
  • Fixed back plot imperial tool size problem.
CIMCO Edit 5.10.09 PreviewReleased: 27-10-05
Changes since previous version:
CIMCO Edit 5.10.09
  • Added triggers to extract additional for the NC-Base tool list.
  • Added option to select a NC code coloring scheme similar to the V4 default. Ref: Setup/File Types/Colors/Letter Colors
  • Changed Insert/Remove spaces to include lines with block skip.
  • Minor updates to the back plot.
  • Fixed Editor crash / print crash (Introduced in 5.10.03).
CIMCO Edit 5.10.08 PreviewReleased: 24-10-05
Changes since previous version:
CIMCO Edit 5.10.08
  • Minor updates to the back plot.
CIMCO Edit 5.10.07 PreviewReleased: 18-10-05
Changes since previous version:
CIMCO Edit 5.10.07
  • Added support for showing the pocket tool path in CNC-Calc.
  • Added support for plotting a file from the command line.
  • Added support for Fanuc lathe cycles in the back plot.
  • Added support for specifying size of recent lists.
  • Fixed problem closing the editor in some cases when the NC-Base client was loaded.
CIMCO Edit 5.10.06 PreviewReleased: 10-10-05
Changes since previous version:
CIMCO Edit 5.10.06
  • Added option to execute an external command from within the editor.
CIMCO Edit 5.10.05 PreviewReleased: 02-10-05
Changes since previous version:
CIMCO Edit 5.10.05
  • Added pocket operation to CNC-Calc
  • Minor updates and fixes to the back plot.
CIMCO Edit 5.10.04 PreviewReleased: 28-09-05
Changes since previous version:
CIMCO Edit 5.10.04
  • Minor updates and fixes to the back plot.
CIMCO Edit 5.10.03 PreviewReleased: 25-09-05
Changes since previous version:
CIMCO Edit 5.10.03
  • Added option to run database integrity check from the NC-Base backup service.
  • Added support for automatically moving machine(group) base directories.
  • Improved listing of Mazatrol file contents in the NC-Base preview.
  • Fixed problem specifying colors for individual letters.
  • Minor updates and fixes to the back plot.
CIMCO Edit 5.10.02 PreviewReleased: 22-09-05
Changes since previous version:
CIMCO Edit 5.10.02
  • Added option to save settings for all user in the same location or separately. Ref: Setup/Global Setup/Share settings between all users
  • Minor updates and fixes to the back plot.
CIMCO Edit 5.10.01 PreviewReleased: 16-09-05
Changes since previous version:
CIMCO Edit 5.10.01
  • Added new back plot with 5-Axis and solid simulation.
  • Changed editor to leave block marking after a block operation.
CIMCO Edit 5.02.35 PreviewReleased: 05-09-05
Changes since previous version:
CIMCO Edit 5.02.35
  • Fixed problem with file compare when both files changed outside the editor.
CIMCO Edit 5.02.34 PreviewReleased: 31-08-05
Changes since previous version:
CIMCO Edit 5.02.34
  • No changes in this version. Released as part of CIMCO Software version 5.02.34
CIMCO Edit 5.02.33 PreviewReleased: 30-08-05
Changes since previous version:
CIMCO Edit 5.02.33
  • Updated CNC-Calc.
CIMCO Edit 5.02.32 PreviewReleased: 22-08-05
Changes since previous version:
CIMCO Edit 5.02.32
  • Fixed problem with DTR not set when using hardware handshake.
CIMCO Edit 5.02.31 PreviewReleased: 18-08-05
Changes since previous version:
CIMCO Edit 5.02.31
  • Fixed problem with editor also opening executable when opening files in some cases.
CIMCO Edit 5.02.30 PreviewReleased: 17-08-05
Changes since previous version:
CIMCO Edit 5.02.30
  • Added option to leave associated files in place and delete only the reference when deleting a file. Ref: Database/Setup/Server Settings/Delete assoc. leaves file Ref: Database/Setup/Server Settings/Delete assoc. prompt to leave file
  • Updated CNC-Calc DXF reader.
  • Updated NC-Base tool list generator.
  • Fixed problem using normal search after searching for a macro.
CIMCO Edit 5.02.29 PreviewReleased: 07-08-05
Changes since previous version:
CIMCO Edit 5.02.29
  • Updated CNC-Calc.
CIMCO Edit 5.02.28 PreviewReleased: 20-07-05
Changes since previous version:
CIMCO Edit 5.02.28
  • Added option to never prompt to copy/move files to the program directory. Ref: Database/Setup/Client Settings/Never copy/move files to program dir.
  • Fixed problem associating files already in the database using Drag'n'Drop.
CIMCO Edit 5.02.27 PreviewReleased: 19-07-05
Changes since previous version:
CIMCO Edit 5.02.27
  • No changes in this version. Released as part of CIMCO Software version 5.02.27
CIMCO Edit 5.02.26 PreviewReleased: 15-07-05
Changes since previous version:
CIMCO Edit 5.02.26
  • Added support for specifying the template to use on the command line. Example: Edit.exe /t ISO Mill "File Name"
  • Added support for entering the directory name on the 'Select Directory' dialogs.
CIMCO Edit 5.02.25 PreviewReleased: 14-07-05
Changes since previous version:
CIMCO Edit 5.02.25
  • Added option to change NC-Base extensions. Ref: Database/Setup/Machines/Advanced/Change Extension
  • Fixed problem extracting NC-Base information from the filename when auto importing.
CIMCO Edit 5.02.24 PreviewReleased: 09-07-05
Changes since previous version:
CIMCO Edit 5.02.24
  • Added generic NC-Base import utility (NCBaseConvert.exe)
  • Fixed crashes in CNC-Calc.
CIMCO Edit 5.02.23 PreviewReleased: 03-07-05
Changes since previous version:
CIMCO Edit 5.02.23
  • No changes in this version. Released as part of CIMCO Software version 5.02.23
CIMCO Edit 5.02.22 PreviewReleased: 30-06-05
Changes since previous version:
CIMCO Edit 5.02.22
  • Changed NC-Base to leave new files open after adding it to the database.
CIMCO Edit 5.02.21 PreviewReleased: 28-06-05
Changes since previous version:
CIMCO Edit 5.02.21
  • Fixed problem starting the editor from some programs.
  • Fixed problem when configuration files contains ASCII 0's
  • Fixed problem adding new programs to the database. (Introduced in 5.02.20)
  • Fixed problem detecting database upgrades.
CIMCO Edit 5.02.20 PreviewReleased: 24-06-05
Changes since previous version:
CIMCO Edit 5.02.20
  • Added support for using the file/path name as input to the NC-Base 'Program Format' triggers.
  • Added support for extracting comments from Mazatrol programs and use it as input to the NC-Base 'Program Format' triggers.
  • Added right click context menu to tabs.
  • Added support for restoring backups from older database versions.
  • Added 'DNC Port' column to the NC-Base program list, showing the port that received the program.
  • Updated NC-Base link to include name of port that received file in the log.
  • Fixed problem with the macro option 'Insert with sign' when 0 was specified.
  • Fixed problem with database integrity check deleting files waiting on the import queue.
  • Fixed problem when adding files twice from the editor and the leave file option was disabled.
  • Fixed problem with NC-Assistant updating wrong values.
  • Fixed problem using advanced triggers as start trigger, end trigger and ignore trigger in the NC-Base program format setup.
  • Fixed problem enabling the DNC-Max client plug-in. Notice: NC-Base and License server updated, all clients and servers must be upgraded!
CIMCO Edit 5.02.19 PreviewReleased: 17-06-05
Changes since previous version:
CIMCO Edit 5.02.19
  • Changed NC-Base client to automatically shutdown editor after database restore.
  • Fixed hang when adding macro parameters by copying macro definition from another macro.
  • Fixed problem with files "getting stuck" when user deleted a program programs on the import queue without rejecting it first.
  • Fixed problem with the option 'Notify only when program has focus'.
  • Fixed problem restoring database backups when notify option was enabled.
  • Fixed problem with NC-Base program format triggers when triggers for empty NC-Base fields were enabled.
CIMCO Edit 5.02.18 PreviewReleased: 16-06-05
Changes since previous version:
CIMCO Edit 5.02.18
  • Added tool compensation to CNC-Calc.
  • Added support for specifying # in macros, using ## or \#
  • Fixed problem using 'Insert Block Skips' when no block skip character was specified.
CIMCO Edit 5.02.17 PreviewReleased: 09-06-05
Changes since previous version:
CIMCO Edit 5.02.17
  • Added option to hide NC-Assistant 'Balloons'.
  • Added option to automatically update database information when editing NC-File. Ref: Database/Setup/Server Settings/Advanced/ Update program info when editing files
  • Added option to automatically update NC-File when updating database information. Ref: Database/Setup/Server Settings/Advanced/ Update files when updating program info Ref: Database/Setup/Machines/Advanced/Do not update info in file
  • Added option to manually update database information from NC-File. (Right click on program and select: 'Update program info from file'). Ref: Database/Setup/Client Settings/Advanced/ Show 'Update program info from file'
  • Added option to manually update database information from NC-File. (Right click on program and select: 'Update file with program info'). Ref: Database/Setup/Client Settings/Advanced/ Show 'Update file with program info'
  • Improved function to insert machine monitoring macros.
CIMCO Edit 5.02.16 PreviewReleased: 31-05-05
Changes since previous version:
CIMCO Edit 5.02.16
  • Fixed crash when closing file, closing editor or printing.
CIMCO Edit 5.02.15 PreviewReleased: 30-05-05
Changes since previous version:
CIMCO Edit 5.02.15
  • Fixed problem with missing button on back plot toolbar (introduced in 5.02.14).
  • Fixed crash when closing file compare (introduced in 5.02.13).
CIMCO Edit 5.02.14 PreviewReleased: 26-05-05
Changes since previous version:
CIMCO Edit 5.02.14
  • Added option to un-lock NC-Base programs when marked as 'Ready'
  • Added option to set NC-Base programs read-only when marked as 'Ready'
  • Fixed problem changing NC-Base program status to 'Updated' after setting to read-write by editing program.
  • Fixed problem with un-install removing some configuration information.
  • Fixed crash when using Translate/Rotate/Offset.
CIMCO Edit 5.02.13 PreviewReleased: 13-05-05
Changes since previous version:
CIMCO Edit 5.02.13
  • Added option to insert machine monitoring macros.
  • Fixed problem starting the editor from some programs.
CIMCO Edit 5.02.12 PreviewReleased: 12-05-05
Changes since previous version:
CIMCO Edit 5.02.12
  • Added support for handling UNICODE files.
  • Fixed problem importing machine types from V4.
  • Fixed problem using 'Save All'/'Close All' with CNC-Calc.
CIMCO Edit 5.02.11 PreviewReleased: 10-05-05
Changes since previous version:
CIMCO Edit 5.02.11
  • Added support for manually receiving new programs into NC-Base.
  • Added 'Copy Files' menu to copy files to Floppy/Desktop/Removable drives from NC-Base.
  • Added warning message when loading lines longer than 1024 characters.
  • Changed NC-Base client to log only changes when file is saved.
  • Improved NC-Base versioning information.
  • Improved NC-Base version data when upgrading from V4.
  • Fixed problem printing in landscape mode.
  • Fixed problem sorting by custom fields in NC-Base.
  • Fixed problem with no search results showing up until header was clicked.
CIMCO Edit 5.02.10 PreviewReleased: 05-05-05
Changes since previous version:
CIMCO Edit 5.02.10
  • Added support for closing window by clicking middle mouse button/wheel on tab bar.
  • Added DNC-Max server name to NC-Base machine group port list.
  • Added support for changing Drag'n'Drop between cut and copy after drag started using CTRL key.
  • Updated NC-Base link to log only program information that has been changed.
  • Fixed problem with decimal character on numeric keypad using some keyboard mappings.
CIMCO Edit 5.02.09 PreviewReleased: 04-05-05
Changes since previous version:
CIMCO Edit 5.02.09
  • Fixed problem with NC-Base loosing passwords.
CIMCO Edit 5.02.08 PreviewReleased: 22-04-05
Changes since previous version:
CIMCO Edit 5.02.08
  • Added support for generating letters in the CNC-Calc.
CIMCO Edit 5.02.07 PreviewReleased: 18-04-05
Changes since previous version:
CIMCO Edit 5.02.07
  • No changes in this version. Released as part of CIMCO Software version 5.02.07
CIMCO Edit 5.02.06 PreviewReleased: 12-04-05
Changes since previous version:
CIMCO Edit 5.02.06
  • DNC-Max update. Notice: DNC-Max client protocol updated, clients needs to be updated.
CIMCO Edit 5.02.05 PreviewReleased: 11-04-05
Changes since previous version:
CIMCO Edit 5.02.05
  • Fixed back plot crash.
CIMCO Edit 5.02.04 PreviewReleased: 10-04-05
Changes since previous version:
CIMCO Edit 5.02.04
  • Updated CNC-Calc.
CIMCO Edit 5.02.03 PreviewReleased: 09-04-05
Changes since previous version:
CIMCO Edit 5.02.03
  • Fixed installation problem.
CIMCO Edit 5.02.02 PreviewReleased: 06-04-05
Changes since previous version:
CIMCO Edit 5.02.02
  • Updated CNC-Calc.
CIMCO Edit 5.02.01 PreviewReleased: 06-04-05
Changes since previous version:
CIMCO Edit 5.02.01
  • First public release.
CIMCO Edit 5.01.21 PreviewReleased: 05-04-05
Changes since previous version:
CIMCO Edit 5.01.21
  • Updated CNC-Calc.
CIMCO Edit 5.01.20 PreviewReleased: 28-03-05
Changes since previous version:
CIMCO Edit 5.01.20
  • Fixed problem finding some macros.
  • Fixed crash when closing the editor.
  • Fixed crash in CNC-Calc.
  • Fixed problem with machine zero in CNC-Calc.
CIMCO Edit 5.01.19 PreviewReleased: 21-03-05
Changes since previous version:
CIMCO Edit 5.01.19
  • Updated CNC-Calc.
CIMCO Edit 5.01.18 PreviewReleased: 16-03-05
Changes since previous version:
CIMCO Edit 5.01.18
  • No changes in this version. Released as part of CIMCO Software version 5.01.18
CIMCO Edit 5.01.17 PreviewReleased: 14-03-05
Changes since previous version:
CIMCO Edit 5.01.17
  • No changes in this version. Released as part of CIMCO Software version 5.01.17
CIMCO Edit 5.01.16 PreviewReleased: 03-03-05
Changes since previous version:
CIMCO Edit 5.01.16
  • Added CIMCO Remote Support Program.
  • Updated CNC-Calc.
  • Fixed problem restoring NC-Base backups.
CIMCO Edit 5.01.15 PreviewReleased: 01-03-05
Changes since previous version:
CIMCO Edit 5.01.15
  • Fixed NC-Base problem (introduce in 5.01.14).
CIMCO Edit 5.01.14 PreviewReleased: 01-03-05
Changes since previous version:
CIMCO Edit 5.01.14
  • Added option to print only the differences when printing a file compare.
  • Added option to map numeric keypad decimal point to the specified machine decimal point.
  • Added option to skip lines without block numbers when renumbering a file.
  • Updated CNC-Calc to support entering values as expressions, ex. 2+1/5.
CIMCO Edit 5.01.13 PreviewReleased: 18-02-05
Changes since previous version:
CIMCO Edit 5.01.13
  • Updated NC-Assistant.
  • Fixed problem moving associated files between programs in NC-Base.
CIMCO Edit 5.01.12 PreviewReleased: 16-02-05
Changes since previous version:
CIMCO Edit 5.01.12
  • Fixed problem back plotting some turning cycles.
CIMCO Edit 5.01.11 PreviewReleased: 08-02-05
Changes since previous version:
CIMCO Edit 5.01.11
  • Fixed problem storing editor configurations in NC-Base.
  • Fixed memory leak (introduced in 5.01.10).
CIMCO Edit 5.01.10 PreviewReleased: 04-02-05
Changes since previous version:
CIMCO Edit 5.01.10
  • Fixed file compare problem.
  • Fixed problem when purging programs awaiting approval.
  • Fixed problem running CNC-Calc in demo mode.
  • Fixed problem with the 'Omit lines containing' option in the DNC setup.
CIMCO Edit 5.01.09 PreviewReleased: 02-02-05
Changes since previous version:
CIMCO Edit 5.01.09
  • Updated CNC-Calc
  • Fixed problem re-loading files changed outside the editor.
CIMCO Edit 5.01.08 PreviewReleased: 26-01-05
Changes since previous version:
CIMCO Edit 5.01.08
  • Updated CNC-Calc
CIMCO Edit 5.01.07 PreviewReleased: 24-01-05
Changes since previous version:
CIMCO Edit 5.01.07
  • Fixed problem auto importing program info from associated files, when 'Auto add memo/setup/tool files to new programs' was disabled.
  • Fixed problem with file compare on some files.
  • Fixed problem with 'Find Tool Change'.
CIMCO Edit 5.01.06 PreviewReleased: 21-01-05
Changes since previous version:
CIMCO Edit 5.01.06
  • Updated CNC-Calc
CIMCO Edit 5.01.05 PreviewReleased: 19-01-05
Changes since previous version:
CIMCO Edit 5.01.05
  • Fixed system crash when running Norton/Symantec.
CIMCO Edit 5.01.04 PreviewReleased: 17-01-05
Changes since previous version:
CIMCO Edit 5.01.04
  • NC-Base Update.
CIMCO Edit 5.01.03 PreviewReleased: 16-01-05
Changes since previous version:
CIMCO Edit 5.01.03
  • Updated CNC-Calc
  • Fixed problem with the color configuration.
CIMCO Edit 5.01.02 PreviewReleased: 10-01-05
Changes since previous version:
CIMCO Edit 5.01.02
  • Updated NC-Base install.
CIMCO Edit 5.01.01 PreviewReleased: 10-01-05
Changes since previous version:
CIMCO Edit 5.01.01
  • Initial release. History