CIMCO Edit 8 Releases

CIMCO Edit 8.12.51 StableReleased: 03-05-23Register to download
Changes since previous version:
CIMCO Edit 8.12.51
  • New: Added new option to password protect the editor on launch. Editor password can be set in Global Setup > Plugins.
  • Fix: Fixed a possible crash when using the legacy OSAI control.
  • Fix: Add missing help string for configuration paths button in Plugins dialog
CIMCO Edit 8.12.49 StableReleased: 24-03-23Register to download
Changes since previous version:
CIMCO Edit 8.12.49
  • New: APT Filter: CYLNDR command is now supported.
CIMCO Edit 8.12.48 StableReleased: 27-02-23Register to download
Changes since previous version:
CIMCO Edit 8.12.48
  • Fixed: Fixed an issue in Mazatrol Viewer where numbers were off by one decimal place to the right.
CIMCO Edit 8.12.44 StableReleased: 27-01-23Register to download
Changes since previous version:
CIMCO CNC-Calc 8.12.44
  • Change: It is now possible to use negative stock to leave in the Helix Cutting operation.
CIMCO Edit 8.12.43 StableReleased: 22-12-22Register to download
Changes since previous version:
CIMCO CNC-Calc 8.12.43
  • Fix: Corrected error with the stock to leave in helix drilling.
CIMCO Edit 8.12.42 StableReleased: 30-11-22Register to download
Changes since previous version:
CIMCO CNC-Calc 8.12.42
  • Fix: Fixed bug with lost compensation on arcs after joining.
  • Fix: Fixed compensation for ramp lead-in if it links compensated path.
CIMCO Edit 8.12.41 StableReleased: 29-11-22Register to download
Changes since previous version:
CIMCO Edit 8.12.41
  • Fix: Fanuc Filter: Fixed an issue with G69 (coordinate rotation cancel).
CIMCO Edit 8.12.40 StableReleased: 08-11-22Register to download
Changes since previous version:
CIMCO Edit 8.12.40
  • Change: Increased maximum Mazatrol Viewer Decimals from 4 to 5 in Mazatrol Viewer setup.
CIMCO Edit 8.12.39 StableReleased: 04-11-22Register to download
Changes since previous version:
CIMCO Edit 8.12.39
  • Fix: Fixed an issue with tool t0 not being ignored when ignore tool number 0 is enabled.
  • New: Updated APT filter to support DNTCUT and CUT as multiline commentary delimiters.
CIMCO Edit 8.12.38 StableReleased: 30-09-22Register to download
Changes since previous version:
CIMCO Edit 8.12.38
  • Fix: Fixed problem with decimal count of variables in macro output when macro contains conditional statements.
  • Fix: Fixed a rare bug in DXF export.
  • Chg: Updated NC Filters.
CIMCO Edit 8.12.36 StableReleased: 09-09-22Register to download
Changes since previous version:
CIMCO Edit 8.12.36
  • No changes in this version. Released as part of CIMCO Software version 8.12.36
CIMCO Edit 8.12.35 StableReleased: 16-08-22Register to download
Changes since previous version:
CIMCO Edit 8.12.35
  • No changes in this version. Released as part of CIMCO Software version 8.12.35
CIMCO Edit 8.12.34 StableReleased: 15-08-22Register to download
Changes since previous version:
CIMCO Edit 8.12.34
  • Fix: Fixed an issue with decimal shifting in Mazatrol Viewer. (S15300)
CIMCO CNC-Calc 8.12.34
  • Change: Changed so Contour now makes leadin/out moves when Use Compensation on Roughing is selected.
CIMCO Edit 8.12.33 StableReleased: 09-08-22Register to download
Changes since previous version:
CIMCO Edit 8.12.33
  • No changes in this version. Released as part of CIMCO Software version 8.12.33
CIMCO Edit 8.12.32 StableReleased: 22-07-22Register to download
Changes since previous version:
CIMCO Edit 8.12.32
  • Fix: Fixed Export to DXF tolerance issue.
  • Fix: Fixed an issue with arc directions not being reverted when using the Mirror NC Function.
CIMCO Edit 8.12.31 StableReleased: 28-06-22Register to download
Changes since previous version:
CIMCO Edit 8.12.31
  • Change: Updated NC Filters.
CIMCO Edit 8.12.30 StableReleased: 03-06-22Register to download
Changes since previous version:
CIMCO Edit 8.12.30
  • Fix: Fixed incorrectly reported Z rapid and cutting dimensions in toolpath statistics.
CIMCO Edit 8.12.29 StableReleased: 11-05-22Register to download
Changes since previous version:
CIMCO Edit 8.12.29
  • Fix: Fixed default Fanuc Multi Channel modes synchronizing with wrong M codes. (S12941)
  • Fix: Fixed default Okuma Multi Channel mode synchronizing with wrong P codes. (S12494)
  • Fix: Fixed a possible crash when using Heidenhain filter
  • New: Added support for non numeral labels in Heidenhain filter
  • New: Added support for Brother Control filter
CIMCO Edit 8.12.28 StableReleased: 29-04-22Register to download
Changes since previous version:
CIMCO Edit 8.12.28
  • No changes in this version. Released as part of CIMCO Software version 8.12.28
CIMCO Edit 8.12.27 StableReleased: 20-04-22Register to download
Changes since previous version:
CIMCO Edit 8.12.27
  • Chg: Updated Roeders Heidenhain filter.
CIMCO Edit 8.12.25 StableReleased: 13-04-22Register to download
Changes since previous version:
CIMCO Edit 8.12.25
  • Fix: Fixed translate function not handling registers after G92 blocks. (S11693)
CIMCO Edit 8.12.24 StableReleased: 06-04-22Register to download
Changes since previous version:
CIMCO Edit 8.12.24
  • No changes in this version. Released as part of CIMCO Software version 8.12.24
CIMCO Edit 8.12.23 StableReleased: 28-03-22Register to download
Changes since previous version:
CIMCO Edit 8.12.23
  • Change: Updated Heidenhain Filter.
CIMCO Edit 8.12.22 StableReleased: 18-03-22Register to download
Changes since previous version:
CIMCO Edit 8.12.22
  • No changes in this version. Released as part of CIMCO Software version 8.12.22
CIMCO Edit 8.12.21 StableReleased: 15-03-22Register to download
Changes since previous version:
CIMCO Edit 8.12.21
  • No changes in this version. Released as part of CIMCO Software version 8.12.21
CIMCO Edit 8.12.19 StableReleased: 03-03-22Register to download
Changes since previous version:
CIMCO Edit 8.12.19
  • No changes in this version. Released as part of CIMCO Software version 8.12.19
CIMCO Edit 8.12.18 StableReleased: 24-02-22Register to download
Changes since previous version:
CIMCO CNC-Calc 8.12.18
  • New: It is now possible to set the max output angle of toolpath arcs in the CNC-Calc configuration page in the editor.
CIMCO Edit 8.12.15 StableReleased: 01-02-22Register to download
Changes since previous version:
CIMCO Edit 8.12.15
  • No changes in this version. Released as part of CIMCO Software version 8.12.15
CIMCO Edit 8.12.14 StableReleased: 25-01-22Register to download
Changes since previous version:
CIMCO Edit 8.12.14
  • Fix: Fixed desynchronization glitch of the toolpath and lines in the editor.
  • Fixed an issue where code disappears when editing in Okuma multichannel. (S8782)
CIMCO Edit 8.12.13 StableReleased: 11-01-22Register to download
Changes since previous version:
CIMCO Edit 8.12.13
  • (Fix): Fixed a possible crash after starting/closing Backplot when Advanced NC-Functions is disabled.
CIMCO Edit 8.12.11 StableReleased: 08-12-21Register to download
Changes since previous version:
CIMCO Edit 8.12.11
  • (Fix): Fixed an issue with keyboard input, such as Ctrl+C and Ctrl+V, in Multi Channel Configuration dialog
  • (Fix): Fixed Multi channel not working when parameters SYNCTRIG and SYNCTRIGID are empty in a MAC file.
CIMCO CNC-Calc 8.12.11
  • (Fix): Chamfer corrected so it now shows message when splines are selected.
CIMCO Edit 8.12.10 StableReleased: 15-11-21Register to download
Changes since previous version:
CIMCO Edit 8.12.10
  • No changes in this version. Released as part of CIMCO Software version 8.12.10
CIMCO Edit 8.12.09 StableReleased: 03-11-21Register to download
Changes since previous version:
CIMCO Edit 8.12.09
  • No changes in this version. Released as part of CIMCO Software version 8.12.09
CIMCO Edit 8.12.08 StableReleased: 03-11-21Register to download
Changes since previous version:
CIMCO Edit 8.12.08
  • No changes in this version. Released as part of CIMCO Software version 8.12.08
CIMCO Edit 8.12.07 StableReleased: 02-11-21Register to download
Changes since previous version:
CIMCO Edit 8.12.07
  • No changes in this version. Released as part of CIMCO Software version 8.12.07
CIMCO Edit 8.12.06 StableReleased: 19-10-21Register to download
Changes since previous version:
CIMCO Edit 8.12.06
  • No changes in this version. Released as part of CIMCO Software version 8.12.06
CIMCO Edit 8.12.05 StableReleased: 11-10-21Register to download
Changes since previous version:
CIMCO Edit 8.12.05
  • No changes in this version. Released as part of CIMCO Software version 8.12.05
CIMCO Edit 8.12.04 StableReleased: 08-10-21Register to download
Changes since previous version:
CIMCO Edit 8.12.04
  • No changes in this version. Released as part of CIMCO Software version 8.12.04
CIMCO Edit 8.12.03 StableReleased: 07-10-21
Changes since previous version:
CIMCO Edit 8.12.03
  • No changes in this version. Released as part of CIMCO Software version 8.12.03
CIMCO Edit 8.12.02 StableReleased: 06-10-21Register to download
Changes since previous version:
CIMCO Edit 8.12.02
  • (Fix): Updated Download Latest Version to point to the correct version.
CIMCO Edit 8.12.01 PreviewReleased: 04-10-21Register to download
Changes since previous version:
CIMCO Edit 8.12.01
  • (Fix): Fixed an issue where tool paths were not drawn correctly in certain cases. (S11670)
  • (Fix): Fixed an issues where unordered macro formulas would use digit properties of the wrong formula. (S10999)
  • (New): Now outputs DUMP.DMP when CIMCO Edit crashes. (S9060)
  • (Fix): Fixed an issue where the Mazatrol Viewer would display incorrect characters in certain locales. (S11862)
  • (Improvement): "Send Data in current window" icon is now enabled for remaining protocols that can use this feature. If file is unsaved / untitled, a prompt to save the file before continuing is shown. (S5640)
CIMCO Edit 8.09.32 StableReleased: 16-08-22Register to download
Changes since previous version:
CIMCO Edit 8.09.32
  • No changes in this version. Released as part of CIMCO Software version 8.09.32
CIMCO Edit 8.09.31 StableReleased: 03-06-22Register to download
Changes since previous version:
CIMCO Edit 8.09.31
  • No changes in this version. Released as part of CIMCO Software version 8.09.31
CIMCO Edit 8.09.30 StableReleased: 29-04-22Register to download
Changes since previous version:
CIMCO Edit 8.09.30
  • No changes in this version. Released as part of CIMCO Software version 8.09.30
CIMCO Edit 8.09.29 StableReleased: 21-04-22Register to download
Changes since previous version:
CIMCO Edit 8.09.29
  • No changes in this version. Released as part of CIMCO Software version 8.09.29
CIMCO Edit 8.09.28 StableReleased: 06-04-22Register to download
Changes since previous version:
CIMCO Edit 8.09.28
  • No changes in this version. Released as part of CIMCO Software version 8.09.28
CIMCO Edit 8.09.27 StableReleased: 18-03-22Register to download
Changes since previous version:
CIMCO Edit 8.09.27
  • No changes in this version. Released as part of CIMCO Software version 8.09.27
CIMCO Edit 8.09.26 StableReleased: 18-02-22Register to download
Changes since previous version:
CIMCO Edit 8.09.26
  • No changes in this version. Released as part of CIMCO Software version 8.09.26
CIMCO Edit 8.09.25 StableReleased: 27-01-22Register to download
Changes since previous version:
CIMCO Edit 8.09.25
  • No changes in this version. Released as part of CIMCO Software version 8.09.25
CIMCO Edit 8.09.24 StableReleased: 12-01-22Register to download
Changes since previous version:
CIMCO Edit 8.09.24
  • No changes in this version. Released as part of CIMCO Software version 8.09.24
CIMCO Edit 8.09.23 StableReleased: 08-12-21Register to download
Changes since previous version:
CIMCO Edit 8.09.23
  • No changes in this version. Released as part of CIMCO Software version 8.09.23
CIMCO Edit 8.09.22 StableReleased: 15-11-21Register to download
Changes since previous version:
CIMCO Edit 8.09.22
  • No changes in this version. Released as part of CIMCO Software version 8.09.22
CIMCO Edit 8.09.21 StableReleased: 03-11-21Register to download
Changes since previous version:
CIMCO Edit 8.09.21
  • No changes in this version. Released as part of CIMCO Software version 8.09.21
CIMCO Edit 8.09.20 StableReleased: 27-10-21Register to download
Changes since previous version:
CIMCO Edit 8.09.20
  • No changes in this version. Released as part of CIMCO Software version 8.09.20
CIMCO Edit 8.09.19 StableReleased: 28-09-21Register to download
Changes since previous version:
CIMCO Edit 8.09.19
  • No changes in this version. Released as part of CIMCO Software version 8.09.19
CIMCO Edit 8.09.18 StableReleased: 24-09-21Register to download
Changes since previous version:
CIMCO Edit 8.09.18
  • (Fix): Fixed an issue where tool paths were not drawn correctly in certain cases. (S11670)
CIMCO Edit 8.09.17 StableReleased: 09-08-21Register to download
Changes since previous version:
CIMCO Edit 8.09.17
  • (Fix) : Fixed previous going to next when searching in file. (S9704)
CIMCO Edit 8.09.16 StableReleased: 16-06-21Register to download
Changes since previous version:
CIMCO Edit 8.09.16
  • No changes in this version. Released as part of CIMCO Software version 8.09.16
CIMCO Edit 8.09.15 StableReleased: 08-06-21Register to download
Changes since previous version:
CIMCO Edit 8.09.15
  • (Fix) : Fixes a possible crash when converting all lines to uppercase or lowercase. (S9447)
CIMCO Edit 8.09.14 StableReleased: 10-05-21Register to download
Changes since previous version:
CIMCO Edit 8.09.14
  • S7416 - Fix: Fixed an issue where the printed text colors did not match the colors in CIMCO Edit
  • S7414 - Fix: Fixed an issue where printing a document with 'Use colors' disabled would result in blue colored text
CIMCO CNC-Calc 8.09.14
  • T3130 - Fix: Fixes CNC-Calc not being able to print
  • T3131 - Fix: Fixes an issue where the printed result was not centered on the paper
  • T3132 - Fix: Fixes a possible crash when resizing the Editor window.
  • T3133 - Fix: Fixes a crash when trying to print a zero width or zero height document
  • T3134 - Fix: Fixed possible error when zooming in drawing.
CIMCO Edit 8.09.13 StableReleased: 26-03-21Register to download
Changes since previous version:
CIMCO CNC-Calc 8.09.13
  • Fixed crash when closing non-saved drawing.
CIMCO Edit 8.09.12 StableReleased: 12-02-21Register to download
Changes since previous version:
CIMCO Edit 8.09.12
  • Num filter: Fix M0 blocker.
  • Num filter: Fix peck drilling.
  • Num filter: Fix jump code G79
  • Num filter: Gix G66 and G33
  • Siemens filter: Support shortened barnch macro synatax in the form: IF cond GOTO lbl
  • Siemens filter: Support 'PROC' definition
  • Turning simulation: Corrected y-parameter issue
  • Haas filter updated
  • Fixed an issue where the Editor could fail to save overwriting existing files on some network shares.
  • Changed a crash in ISO / Heidenhain Converter when using invalid NC-Code into an error message.
CIMCO Edit 8.09.11 PreviewReleased: 12-01-21Register to download
Changes since previous version:
CIMCO Edit 8.09.11
  • No changes in this version. Released as part of CIMCO Software version 8.09.11
CIMCO Edit 8.09.10 StableReleased: 14-12-20Register to download
Changes since previous version:
CIMCO Edit 8.09.10
  • Turning solidsimulation now respects orientation configuration.
  • Added siemens code converter
  • Fixed issue where 'Search All' would not jump to next open file.
CIMCO CNC-Calc 8.09.10
  • Fixed general crash when using CNC-Calc.
CIMCO Edit 8.09.09 PreviewReleased: 23-11-20Register to download
Changes since previous version:
CIMCO CNC-Calc 8.09.09
  • Fixed general crash when using CNC-Calc.
CIMCO Edit 8.09.08 PreviewReleased: 19-11-20Register to download
Changes since previous version:
CIMCO Edit 8.09.08
  • Added option to specify multiple machine orientations: It is now possible to specify multiple configurations for orientation. Each configuration, except for the default generated one, may be supplied trigger text. A configuration is selected if the trigger text is found in the opened file. In the case of multiple matches, the first specified configuration in the list is always chosen.
  • Added option to generate a tool list for all open files.
  • When selecting 'Always show all files' all files are now correctly shown in the file dialog.
  • Corrected multiple prompts to NC-Base login when running embedded DNC-Max client.
CIMCO CNC-Calc 8.09.08
  • Added contour ramping.
CIMCO Edit 8.09.07 StableReleased: 29-10-20Register to download
Changes since previous version:
CIMCO Edit 8.09.07
  • No changes in this version. Released as part of CIMCO Software version 8.09.07
CIMCO Edit 8.09.06 PreviewReleased: 26-10-20Register to download
Changes since previous version:
CIMCO Edit 8.09.06
  • No changes in this version. Released as part of CIMCO Software version 8.09.06
CIMCO Edit 8.09.05 PreviewReleased: 13-10-20Register to download
Changes since previous version:
CIMCO Edit 8.09.05
  • Macro conditional statement now support literals and \CR to insert new lines in false/true statement.
CIMCO Edit 8.09.04 PreviewReleased: 05-10-20Register to download
Changes since previous version:
CIMCO Edit 8.09.04
  • Closing filecompare now resets NC-Assistant to previous state.
  • Added option to sort filetypes alphabetically.
  • Implemented auto update of Editor with activated ncbase link.
  • Added option to copy an entire macro group from one filetype to others.
  • Added conditinal statement to macro.Format is $IF ? : . The <,>,=, <=, >= operators can be used in the statement, as well as truelike.
CIMCO Edit 8.09.03 PreviewReleased: 30-09-20Register to download
Changes since previous version:
CIMCO Edit 8.09.03
  • Fixed detection of mazatrol files.
  • Fixed 'Search All' button not enabling.
CIMCO Edit 8.09.02 PreviewReleased: 21-09-20Register to download
Changes since previous version:
CIMCO Edit 8.09.02
  • Code Convertion: Added CTX420
  • Mazatrol Viewer: Corrected PUSH, CHUCK and Z-offset display.
  • Backplot: Corrected turning retract issue.
CIMCO Edit 8.09.01 PreviewReleased: 13-07-20Register to download
Changes since previous version:
CIMCO Edit 8.09.01
  • No changes in this version. Released as part of CIMCO Software version 8.09.01
CIMCO Edit 8.09.00 PreviewReleased: 29-06-20
Changes since previous version:
CIMCO Edit 8.09.00
  • New Solid Simulation module which supports 5-axis milling.
  • Corrected issue where HTML files could be printed as plain text.
  • Updated multi channel custom configuration. It is now possible to define a list of syncronization triggers with either pre-configured or extracted channel information.
  • Updated Mazatrol Viewer.
CIMCO Edit 8.08.13 StableReleased: 19-11-20Register to download
Changes since previous version:
CIMCO Edit 8.08.13
  • No changes in this version. Released as part of CIMCO Software version 8.08.13
CIMCO Edit 8.08.12 StableReleased: 23-10-20Register to download
Changes since previous version:
CIMCO Edit 8.08.12
  • No changes in this version. Released as part of CIMCO Software version 8.08.12
CIMCO Edit 8.08.11 StableReleased: 28-09-20Register to download
Changes since previous version:
CIMCO Edit 8.08.11
  • No changes in this version. Released as part of CIMCO Software version 8.08.11
CIMCO Edit 8.08.10 StableReleased: 18-08-20Register to download
Changes since previous version:
CIMCO Edit 8.08.10
  • No changes in this version. Released as part of CIMCO Software version 8.08.10
CIMCO Edit 8.08.09 StableReleased: 13-07-20Register to download
Changes since previous version:
CIMCO Edit 8.08.09
  • No changes in this version. Released as part of CIMCO Software version 8.08.09
CIMCO Edit 8.08.08 PreviewReleased: 18-06-20Register to download
Changes since previous version:
CIMCO Edit 8.08.08
  • No changes in this version. Released as part of CIMCO Software version 8.08.08
CIMCO Edit 8.08.07 PreviewReleased: 09-06-20Register to download
Changes since previous version:
CIMCO Edit 8.08.07
  • Corrected error when saving file where file would appear locked by another process.
CIMCO Edit 8.08.06 PreviewReleased: 04-06-20
Changes since previous version:
CIMCO Edit 8.08.06
  • No changes in this version. Released as part of CIMCO Software version 8.08.06
CIMCO Edit 8.08.05 PreviewReleased: 03-06-20
Changes since previous version:
CIMCO Edit 8.08.05
  • When changing configuration path, default option is changed to not copy existing configuration.
  • Macro: Added 10 up/down when moving macroes in list.
  • Macro: Fixed an issue where not all parameters in macros where copied correctly
  • Backplot: Added NUM Turning filter
  • Backplot Siemens filter: ROT/AROT compensatory movement fixed.
  • Improved Mazatrol file processing.
  • Fixed a rare crash when opening files on slow file systems.
CIMCO CNC-Calc 8.08.05
  • It is now possible to use the chosen compensation for roughing in contour milling.
  • Color configuration changed to reflect layers.
  • Measurement color removed
  • Export contour in turning now has correct coordinates.
  • Loading and saving of parameters title can now be localized.
  • String in cutoff turning has been corrected.
  • New mill Posts processors developed for Heidenhain model TNC530 and TNC640. These are the new type of posts that make extensive use of Custom Drill Fields to capture custom parameters. The DE denotes German and EN denotes English/US.
  • New post add to CNC-Calc. This is used to post programs to a Haas mill.
  • Bug with zero degree splines corrected.
  • Problem with wrong color in default layer corrected.
  • Zero degree splines drawn in the editor now becomes lines.
CIMCO Edit 8.08.03 PreviewReleased: 28-02-20Register to download
Changes since previous version:
CIMCO Edit 8.08.03
  • Filter: Added support for Brother Speedio drilling patterns
  • Fixed the crash when starting the 'Compare file with file' functionality.
CIMCO Edit 8.08.02 PreviewReleased: 30-01-20Register to download
Changes since previous version:
CIMCO Edit 8.08.02
  • No changes in this version. Released as part of CIMCO Software version 8.08.02
CIMCO Edit 8.08.01 PreviewReleased: 13-01-20
Changes since previous version:
CIMCO Edit 8.08.01
  • No changes in this version. Released as part of CIMCO Software version 8.08.01
CIMCO Edit 8.08.00 PreviewReleased: 13-12-19Register to download
Changes since previous version:
CIMCO Edit 8.08.00
  • Fixed crash in open dialogs when having many filetypes with many file extensions configured.
  • Added a messagebox from filters that ask the user if he wants backplot to continue if a while/jump limit has been reached.
  • Multi channel View: Implemented automatic reordering of G13 and G14 statements for multichannel view, if Okuma(G13/G14) is selected.
  • FTP Transfer: The 'Send' button is now no longer grayed out when split screen is not selected
  • Added a config option under multi-channel print to disable printing of line numbers when printing in multi-channel mode.
CIMCO Edit 8.07.17 StableReleased: 04-06-20Register to download
Changes since previous version:
CIMCO Edit 8.07.17
  • No changes in this version. Released as part of CIMCO Software version 8.07.17
CIMCO Edit 8.07.16 StableReleased: 03-06-20
Changes since previous version:
CIMCO Edit 8.07.16
  • No changes in this version. Released as part of CIMCO Software version 8.07.16
CIMCO Edit 8.07.15 StableReleased: 23-04-20Register to download
Changes since previous version:
CIMCO Edit 8.07.15
  • No changes in this version. Released as part of CIMCO Software version 8.07.15
CIMCO Edit 8.07.14 StableReleased: 28-02-20Register to download
Changes since previous version:
CIMCO Edit 8.07.14
  • Fixed the crash when starting the 'Compare file with file' functionality.
CIMCO Edit 8.07.13 StableReleased: 30-01-20Register to download
Changes since previous version:
CIMCO Edit 8.07.13
  • No changes in this version. Released as part of CIMCO Software version 8.07.13
CIMCO Edit 8.07.12 StableReleased: 13-01-20
Changes since previous version:
CIMCO Edit 8.07.12
  • No changes in this version. Released as part of CIMCO Software version 8.07.12
CIMCO Edit 8.07.11 StableReleased: 13-12-19Register to download
Changes since previous version:
CIMCO Edit 8.07.11
  • Fixed crash in open dialogs when having many filetypes with many file extensions configured.
CIMCO Edit 8.07.10 PreviewReleased: 02-12-19Register to download
Changes since previous version:
CIMCO Edit 8.07.10
  • Mazatrol Viewer: Corrected Milling degrees when using 4 decimals.
  • Fixed crash when running in super minimal mode.
CIMCO Edit 8.07.09 PreviewReleased: 19-11-19Register to download
Changes since previous version:
CIMCO Edit 8.07.09
  • Mazatrol Viewer: Improved displaying of network lathe programs
  • Fixed an issue where the Editor would crash during Mirror operations when the folder C:\CIMCO didn't exist.
  • Filecompare will no longer highlight the rest of the line when a diff is found in the middle of the line.
  • Fixed a crash when changing filetypes on certain computers.
  • Added option to tile more than 9 open files.
  • Trying to open a deleted file that was previously backplottet will no longer create an empty file.
  • DNC-Max Client: Send/Recieve buttons are now correctly disabled when operations are not available.
  • DNC-Max Client now collapses groups properly on startup when the option is selected.
  • MultiChannel now supports non-consecutive channel numbers.
CIMCO Edit 8.07.08 PreviewReleased: 25-10-19Register to download
Changes since previous version:
CIMCO CNC-Calc 8.07.08
  • Corrected error with 'Start at Center' checkbox not being used.
CIMCO Edit 8.07.07 PreviewReleased: 30-09-19
Changes since previous version:
CIMCO Edit 8.07.07
  • No changes in this version. Released as part of CIMCO Software version 8.07.07
CIMCO Edit 8.07.06 PreviewReleased: 10-09-19
Changes since previous version:
CIMCO Edit 8.07.06
  • No changes in this version. Released as part of CIMCO Software version 8.07.06
CIMCO Edit 8.07.05 PreviewReleased: 02-09-19
Changes since previous version:
CIMCO Edit 8.07.05
  • Backplot: Corrected 5-axis indexing using G68.
  • Backplot: Improved ability to use variables for Tool numbers and Work offset.
  • CIMCO Edit now allows printing via shell print.
  • NC-Assist: Corrected parameters being shown wrong on lines with multiple G codes.
CIMCO CNC-Calc 8.07.05
  • AdaptiveParameters now persist when changes are made to feedrates.
CIMCO Edit 8.07.04 PreviewReleased: 22-08-19
Changes since previous version:
CIMCO Edit 8.07.04
  • Fixed a bug where closing tabs on mouse middle button would close the wrong tab
  • Fixed an issue where the Open Dialog did not maintain focus.
  • Improved case when trying to open multiple files from different folder. This is only possible using Advanced Open.
  • Fixed Regex and match whole word checkboxes in the replace dialog when ticking multiline
  • FTP view now correctly changes the default folder list when opening connection
  • Mazatrol Viewer: Fixed tool numbers, and unsupported functions.
CIMCO Edit 8.07.03 PreviewReleased: 01-08-19Register to download
Changes since previous version:
CIMCO Edit 8.07.03
  • Macro: Added escape for @. Typing @@ in macro definition will result in @ being inserted when using macro.
  • Transfer: Fixed first transfer was seen as failed.
  • Corrected issue when trying to replace in a file with wrapped lines.
CIMCO Edit 8.07.02 PreviewReleased: 15-07-19Register to download
Changes since previous version:
CIMCO Edit 8.07.02
  • No changes in this version. Released as part of CIMCO Software version 8.07.02
CIMCO Edit 8.07.01 PreviewReleased: 11-07-19Register to download
Changes since previous version:
CIMCO Edit 8.07.01
  • No changes in this version. Released as part of CIMCO Software version 8.07.01
CIMCO Edit 8.07.00 PreviewReleased: 10-07-19Register to download
Changes since previous version:
CIMCO Edit 8.07.00
  • Fixed issue with randomly created temp files when types are loaded.
  • Mazatrol Viewer: Corrected viewing PBM smooth files.
  • Corrected text color issue when 'Modal colors' is active.
  • Corrected issue when loading and saving filetypes.
CIMCO Edit 8.06.11 StableReleased: 30-09-19Register to download
Changes since previous version:
CIMCO Edit 8.06.11
  • No changes in this version. Released as part of CIMCO Software version 8.06.11
CIMCO Edit 8.06.10 StableReleased: 02-09-19
Changes since previous version:
CIMCO Edit 8.06.10
  • Transfer: Fixed first transfer was seen as failed.
CIMCO CNC-Calc 8.06.10
  • AdaptiveParameters now persist when changes are made to feedrates.
CIMCO Edit 8.06.09 StableReleased: 19-07-19Register to download
Changes since previous version:
CIMCO Edit 8.06.09
  • No changes in this version. Released as part of CIMCO Software version 8.06.09
CIMCO Edit 8.06.08 StableReleased: 02-07-19Register to download
Changes since previous version:
CIMCO Edit 8.06.08
  • Improved rotating G-code.
  • Fixed crash when closing multi-channel window.
  • Backplot: Fanuc Filter: Corrected G76 cycle.
  • Fixed crash when failing to connect to FTP server.
  • Corrected issue where quick access toolbar would reset.
  • Corrected 'Open containing folder' when right-clicking file tab.
  • Fixed infinite loop in the editor replace dialog when replacing with certain multiline entries.
CIMCO Edit 8.06.07 PreviewReleased: 06-06-19Register to download
Changes since previous version:
CIMCO Edit 8.06.07
  • Corrected issue where Toolpath Statistics would not open.
  • Backplot: Macro B corrected.
  • Backplot: G71 cycle corrected.
  • Backplot: Fixed crash when using more than 50 decimals.
  • Backplot: Improved use of variables.
  • Backplot: G02 now scales correctly.
  • Backplot: G68 conescutive calls corrected.
CIMCO Edit 8.06.06 PreviewReleased: 06-05-19Register to download
Changes since previous version:
CIMCO Edit 8.06.06
  • NC Convert: Added 'Selection only' option.
  • 'Result to new window' option has been added to the 'Replace' function in CIMCO Edit. With this option checked, the result of the 'Replace' and 'Replace All' operations gets displayed in a new tab.
  • Fixed an issue which caused the Editor to crash in some rare cases when saving a file.
  • Added config option to suppress the NC-Assistant.
CIMCO Edit 8.06.05 PreviewReleased: 10-04-19Register to download
Changes since previous version:
CIMCO Edit 8.06.05
  • No changes in this version. Released as part of CIMCO Software version 8.06.05
CIMCO Edit 8.06.04 PreviewReleased: 08-04-19
Changes since previous version:
CIMCO Edit 8.06.04
  • Backplot fullscreen now opens up on the correct monitor on a multi-monitor setup.
  • Removed auto-save of files when printing.
  • Mazatrol Viewer: Files can no longer be saved as .mzk.
CIMCO Edit 8.06.03 PreviewReleased: 18-03-19Register to download
Changes since previous version:
CIMCO Edit 8.06.03
  • Closing all other tabs now only affects file tabs
  • Fixed an issue when closing tabs using middle mouse button or the right-click popup menu.
  • Fixed printing unsaved file and selection.
  • Increased reload time when editing nc files during backplotting to 500 ms.
CIMCO Edit 8.06.02 PreviewReleased: 06-02-19Register to download
Changes since previous version:
CIMCO Edit 8.06.02
  • Added option in config for CIMCO Edit to use temp files for macros in case multiple editors access the same macro files.
  • Fixed the bug where the context menu would not appear when right-clicking on Backplot window in multi monitor configuration with the 'main' display being to the right of other displays and the Backplot window being in the 'main' display.
  • Fanuc Filter: Minor bug fixes for Fanuc.
  • Okuma Filter: Formula translator and V-variables support for Okuma.
  • Fixed print column setting being ignored when printing.
  • Fixed the bug where the users would not be able to print files from Editor with disabled NC-Base.
  • During upgrade of installation, Configpaths.cfg will be correctly changed to user choice.
CIMCO Edit 8.06.01 PreviewReleased: 14-01-19Register to download
Changes since previous version:
CIMCO Edit 8.06.01
  • No changes in this version. Released as part of CIMCO Software version 8.06.01
CIMCO Edit 8.06.00 PreviewReleased: 02-01-19Register to download
Changes since previous version:
CIMCO Edit 8.06.00
  • Collapsed ribbon groups now have appropriate icons.
CIMCO Edit 8.05.10 StableReleased: 08-04-19Register to download
Changes since previous version:
CIMCO Edit 8.05.10
  • Removed auto-save of files when printing.
  • Mazatrol Viewer: Files can no longer be saved as .mzk.
CIMCO Edit 8.05.09 StableReleased: 18-03-19Register to download
Changes since previous version:
CIMCO Edit 8.05.09
  • Closing all other tabs now only affects file tabs
  • Fixed an issue when closing tabs using middle mouse button or the right-click popup menu.
  • Fixed printing unsaved file and selection.
  • Increased reload time when editing nc files during backplotting to 500 ms.
CIMCO Edit 8.05.08 StableReleased: 13-02-19Register to download
Changes since previous version:
CIMCO Edit 8.05.08
  • No changes in this version. Released as part of CIMCO Software version 8.05.08
CIMCO Edit 8.05.07 StableReleased: 07-02-19Register to download
Changes since previous version:
CIMCO Edit 8.05.07
  • Fixed print column setting being ignored when printing.
CIMCO Edit 8.05.06 StableReleased: 06-02-19Register to download
Changes since previous version:
CIMCO Edit 8.05.06
  • During upgrade of installation, Configpaths.cfg will be correctly changed to user choice.
CIMCO Edit 8.05.05 StableReleased: 10-01-19Register to download
Changes since previous version:
CIMCO Edit 8.05.05
  • No changes in this version. Released as part of CIMCO Software version 8.05.05
CIMCO Edit 8.05.04 PreviewReleased: 03-01-19Register to download
Changes since previous version:
CIMCO Edit 8.05.04
  • No changes in this version. Released as part of CIMCO Software version 8.05.04
CIMCO Edit 8.05.03 PreviewReleased: 21-12-18Register to download
Changes since previous version:
CIMCO Edit 8.05.03
  • Backplot: Fixed issue with machine state orientation for 4-axis machine setups.
CIMCO Edit 8.05.02 PreviewReleased: 17-12-18Register to download
Changes since previous version:
CIMCO Edit 8.05.02
  • Clicking the cancel button in setup macro does no longer save changes.
  • CIMCO Edit now supports specifying backup extension in the General tab.
  • Added new Address Adjustement tool to NC-Functions. This allow user to easily replace, remove or swap addresses
  • Advanced Open: You can click on 'Export results' to export the contents to a file
CIMCO CNC-Calc 8.05.02
  • Tab color indicator now also works for CNC-Calc tabs.
  • Corrected missing icons for layer management buttons.
CIMCO Edit 8.05.01 PreviewReleased: 03-12-18Register to download
Changes since previous version:
CIMCO Edit 8.05.01
  • Fixed Mazak Viewer failed to install when updating an installation.
  • File Compare: +/- are treated as normal characters when not followed by digits
  • File Compare: Compare function now gives same results regardless of order of files.
  • User is no longer prompted to save file when creating a new tool list.
CIMCO Edit 8.05.00 PreviewReleased: 27-11-18Register to download
Changes since previous version:
CIMCO Edit 8.05.00
  • Can now show statistics and simulation correctly when path or file contains special characters.
  • Added option to backup and restore settings.
  • Added new backplot filter: Röders New
  • When choosing 'replace all in selection' no longer ignores the last row of selected text.
  • HAAS Turning is now correcly simulated as turning by default.
  • Added command line switch '/multichannel' to open file(s) in multi channel view mode.
  • It is now possible to bookmark all of the found strings at once in the Search function.
  • 'Clear All' button added to the Bookmarks window.
  • It is now possible to perform a multi-file text replacement from 'Replace' window.
  • Now highlights the entire line rather than only up to windowwidth.
  • It is now possible to use regular expressions in the Replace dialog.
  • Names should no longer be truncated in DNCMaxAdmin CIMCO Edit dock
  • Fixed a bug where the Find dialog did not find all of the matching substrings within a line when using search by regular expressions.
  • Improvements to printing of Mazak Smooth turning.
  • Fixed a number of small errors in printing Mazak files.
CIMCO CNC-Calc 8.05.00
  • In pocket milling 'Use even Depth Cuts' now work correctly when it is deselected.
  • In the menu 'Circle Tangent Through Point' now become grayed out when selected.
  • New Post Processor where it is possible to change the axis names in the global definition.
CIMCO Edit 8.04.04 PreviewReleased: 05-10-18Register to download
Changes since previous version:
CIMCO Edit 8.04.04
  • Fixed an issue where navigating to bookmark using double-click would select the text between the bookmark and the curser in the edit window after navigating to bookmark
CIMCO Edit 8.04.03 PreviewReleased: 25-09-18
Changes since previous version:
CIMCO Edit 8.04.03
  • CIMCO Edit update dialog now asks a yes/no question and only updates if 'Yes' is pressed
  • Tabs can now be organized in CIMCO Edit.
  • Added close button to each individual Tabs.
  • Fixed a bug where DNC-Max client docked toolbar buttons are grayed out when pinned.
  • Corrected issue where Macros would not be loaded on startup.
  • Fixed Tool and Solid menu not showing in backplot tab.
CIMCO CNC-Calc 8.04.03
  • Fixed possible crash when creating new drawing.
  • Changes to the thread milling. External thread tested for too large tool.
  • Error with modality corrected in Haas Post Processor.
CIMCO Edit 8.04.02 PreviewReleased: 05-09-18
Changes since previous version:
CIMCO Edit 8.04.02
  • Corrected issue when detecting configuration from previous CIMCO Edit installations.
  • Corrected issue when selection a file type from drop-down menu.
  • CIMCO Edit no longer crashes when a file is compared with itself.
  • CIMCO Edit now saves maximize status as well as allowing the window to be placed on other monitors besides the primary one on launch.
CIMCO Edit 8.04.01 PreviewReleased: 10-08-18
Changes since previous version:
CIMCO Edit 8.04.01
  • No changes in this version. Released as part of CIMCO Software version 8.04.01
CIMCO Edit 8.04.00 PreviewReleased: 09-08-18
Changes since previous version:
CIMCO Edit 8.04.00
  • Duplicate bookmarks are now removed from the Wins.bookmarks container and 'View Bookmarks' window when a merge of 2+ bookmarks occurs
  • Added a md5 hash of file in order to check if it is in the saved state when redo or undo is called
  • Fixed crash when trying to insert a macro in an unedited file
  • Updated the 'open file' dialog on non windows XP machines
  • It is now possible to use /readonly switch to open files in read-only mode from command-line.
  • Added option 'Open all files as read-only' to CIMCO Edit.
  • Untranslated strings in FTP Split-window made translatable
  • When using 're-open files' options, CNC-Calc drawings are also re-opened
CIMCO CNC-Calc 8.04.00
  • Fixes an issue where the mouse cursor flickers between default cursor and the currently set cursor.
CIMCO Edit 8.03.03 PreviewReleased: 17-07-18Register to download
Changes since previous version:
CIMCO Edit 8.03.03
  • Dirty file indicator '*' is now removed if all actions are undone.
  • Mazak Viewer: Solved Mazak Viewer crashing due to specific cutting conditions.
  • Maximum tab width is now larger for FileCompare tabs.
  • Added synchronized scrolling to CIMCO Edit when shift is pushed down.
CIMCO CNC-Calc 8.03.03
  • New parameters to control direction of finish passes added to Turning finish and roughing.
  • The direction of the finish tool path can now be selected from inside out or outside to in.
CIMCO Edit 8.03.02 StableReleased: 13-06-18Register to download
Changes since previous version:
CIMCO Edit 8.03.02
  • Siemens Filter: Finishing mode of the CYCLE95 is improved.
CIMCO Edit 8.03.00 PreviewReleased: 09-05-18Register to download
Changes since previous version:
CIMCO Edit 8.03.00
  • Fallbacks for saving routine which should allow the Editor to save on Okuma control shares.
CIMCO CNC-Calc 8.03.00
  • Measure corrected so it is now easier to set measurements as horizontal and vertical.
  • Fagor 8055i Microcut post processor added to the distributed posts.
  • Fadal Post Processor added to CNC-Calc.
  • Line parallel and Perpendicular corrected so the line default line length is made positive.
  • Bugs corrected in Roughing and Finish Turning.
  • Bugs corrected for ramp in milling.
  • Corrected bug where we were unable to read letters in drawings.
  • Bug corrected in Turning Roughing and Finish.
CIMCO Edit 8.02.29 StableReleased: 25-05-18Register to download
Changes since previous version:
CIMCO Edit 8.02.29
  • No changes in this version. Released as part of CIMCO Software version 8.02.29
CIMCO Edit 8.02.28 PreviewReleased: 30-04-18
Changes since previous version:
CIMCO Edit 8.02.28
  • No changes in this version. Released as part of CIMCO Software version 8.02.28
CIMCO Edit 8.02.27 PreviewReleased: 12-04-18
Changes since previous version:
CIMCO Edit 8.02.27
  • Heidenhain Filter: Improved arc type detection
CIMCO Edit 8.02.26 PreviewReleased: 04-04-18
Changes since previous version:
CIMCO Edit 8.02.26
  • Updated German translations.
  • Fixed issue with empty tool number when simulating.
  • Filter: Corrected Heidenhain cycle 256
  • NC-Assistant parameter fields can now be collapsed and expanded to provide better access to macro list.
CIMCO Edit 8.02.25 PreviewReleased: 13-03-18Register to download
Changes since previous version:
CIMCO Edit 8.02.25
  • No changes in this version. Released as part of CIMCO Software version 8.02.25
CIMCO Edit 8.02.24 PreviewReleased: 09-03-18Register to download
Changes since previous version:
CIMCO CNC-Calc 8.02.24
  • New kernel that corrects the tool path for pocket milling.
  • Helix and thread milling corrected so that compensation is inserted at the right places.
  • Minor changes made in conjunction with translation.
  • DXF corrected for inserting multiple blocks with rotation and Clone is now corrected so it make a deep clone of the objects.
CIMCO Edit 8.02.23 PreviewReleased: 16-02-18Register to download
Changes since previous version:
CIMCO Edit 8.02.23
  • No changes in this version. Released as part of CIMCO Software version 8.02.23
CIMCO Edit 8.02.22 PreviewReleased: 15-02-18Register to download
Changes since previous version:
CIMCO Edit 8.02.22
  • Improved stability of Toolpath Statistics
CIMCO CNC-Calc 8.02.22
  • Corrected bug where file could not be saved.
CIMCO Edit 8.02.21 PreviewReleased: 06-02-18Register to download
Changes since previous version:
CIMCO Edit 8.02.21
  • Fixed issue with installation without CNC-Calc.
CIMCO CNC-Calc 8.02.21
  • Parameter check corrected for finish and roughing turning.
  • Error in finish turning corrected.
CIMCO Edit 8.02.20 PreviewReleased: 05-02-18
Changes since previous version:
CIMCO Edit 8.02.20
  • Support nested variables in Fanuc/Haas filters.
CIMCO CNC-Calc 8.02.20
  • Added layers to CNC-Calc.
CIMCO Edit 8.02.19 PreviewReleased: 26-01-18Register to download
Changes since previous version:
CIMCO Edit 8.02.19
  • No changes in this version. Released as part of CIMCO Software version 8.02.19
CIMCO Edit 8.02.18 PreviewReleased: 08-01-18Register to download
Changes since previous version:
CIMCO CNC-Calc 8.02.18
  • Fixes an issue where turning operations buttons are not activated until the drop-down menu is changed.
CIMCO Edit 8.02.17 PreviewReleased: 04-01-18Register to download
Changes since previous version:
CIMCO Edit 8.02.17
  • No changes in this version. Released as part of CIMCO Software version 8.02.17
CIMCO Edit 8.02.16 PreviewReleased: 02-01-18
Changes since previous version:
CIMCO Edit 8.02.16
  • No changes in this version. Released as part of CIMCO Software version 8.02.16
CIMCO Edit 8.02.15 PreviewReleased: 20-12-17Register to download
Changes since previous version:
CIMCO Edit 8.02.15
  • Fagor Filter: Fixed hanging bug related to '/' character.
  • Heidenhain Filter: Support rotation PLANE VECTOR and PLANE POINTS rotations.
  • Move Select Servers to its own button on the ribbon. This makes it easier to find and select a DNC-Max Server when not running one locally.
  • Fix an issue where Send/Receive buttons were not activated/deactivated correctly in the DNC-Max Client ribbon tab.
CIMCO CNC-Calc 8.02.15
  • Bug with default values for custom fields corrected.
CIMCO Edit 8.02.14 PreviewReleased: 01-12-17Register to download
Changes since previous version:
CIMCO Edit 8.02.14
  • Make the Select File For Each Channel dialog horizontally resizable.
  • Fixed an issue where tab text would overlap the file Icon when the file has a long filename.
CIMCO Edit 8.02.13 PreviewReleased: 30-11-17Register to download
Changes since previous version:
CIMCO Edit 8.02.13
  • Added CIMCO Edit icon to the Split window dialog.
  • Fix an issue with missing ToolList.txt files. NOTE: The ToolList.txt template file has been removed from the installer, and is now dynamically created in the DATA directory, and if a ToolList file already exists, then it is copied to the DATA directory.
CIMCO CNC-Calc 8.02.13
  • Fixed the linking page showing the wrong label saying Pocket and not Contour
CIMCO Edit 8.02.12 PreviewReleased: 21-11-17Register to download
Changes since previous version:
CIMCO Edit 8.02.12
  • Fix localization for Advanced Renumbering and NC Converter.
  • Re-enable Convert NC Code.
  • Multi Channel Sync and Program start commands styled in the Print output.
  • Fix localization issues in Advanced Open dialog.
  • Changed the layout of Advanced Renumbering dialog to follow CIMCO Edit dialog styles.
  • Remove dependency on elevate.exe.
CIMCO Edit 8.02.11 PreviewReleased: 15-11-17Register to download
Changes since previous version:
CIMCO Edit 8.02.11
  • Updated CNC-Calc.
CIMCO Edit 8.02.10 PreviewReleased: 10-11-17Register to download
Changes since previous version:
CIMCO Edit 8.02.10
  • No changes in this version. Released as part of CIMCO Software version 8.02.10
CIMCO Edit 8.02.09 PreviewReleased: 07-11-17Register to download
Changes since previous version:
CIMCO Edit 8.02.09
  • No changes in this version. Released as part of CIMCO Software version 8.02.09
CIMCO Edit 8.02.08 PreviewReleased: 03-11-17Register to download
Changes since previous version:
CIMCO Edit 8.02.08
  • Added support for printing documents from Multi Channel mode.
CIMCO Edit 8.02.07 PreviewReleased: 27-10-17Register to download
Changes since previous version:
CIMCO CNC-Calc 8.02.07
  • Corrected bug for focus change when entering line lengths.
CIMCO Edit 8.02.05 PreviewReleased: 17-10-17
Changes since previous version:
CIMCO Edit 8.02.05
  • Made some missing strings in the ribbon localizable.
CIMCO Edit 8.02.04 PreviewReleased: 12-10-17Register to download
Changes since previous version:
CIMCO Edit 8.02.04
  • Heidenhain filter: Fixes rare case of infinite looping.
  • Siemens filter: Siemens makes interpretation process more stable in case of incorrect usage of Fanuc syntax in a Siemens program.
CIMCO Edit 8.02.03 PreviewReleased: 03-10-17Register to download
Changes since previous version:
CIMCO CNC-Calc 8.02.03
  • Added Haas post processor.
  • Corrected bug exchanged messages for Contour and Pocket.
CIMCO Edit 8.02.02 PreviewReleased: 31-08-17Register to download
Changes since previous version:
CIMCO Edit 8.02.02
  • No changes in this version. Released as part of CIMCO Software version 8.02.02
CIMCO Edit 8.02.01 PreviewReleased: 25-08-17Register to download
Changes since previous version:
CIMCO Edit 8.02.01
  • No changes in this version. Released as part of CIMCO Software version 8.02.01
CIMCO Edit 8.02.00 PreviewReleased: 24-08-17Register to download
Changes since previous version:
CIMCO CNC-Calc 8.02.00
  • Splines corrected for negative knot values.
  • New Facing operation with Constant Cut facing.
CIMCO Edit 8.01.19 PreviewReleased: 01-08-17Register to download
Changes since previous version:
CIMCO Edit 8.01.19
  • No changes in this version. Released as part of CIMCO Software version 8.01.19
CIMCO Edit 8.01.18 PreviewReleased: 11-07-17Register to download
Changes since previous version:
CIMCO Edit 8.01.18
  • Added support for searching for multiple filenames or extensions in Advanced Open.
  • Added the possibility to choose whether to search in sub-directories when using Advanced Open.
CIMCO Edit 8.01.17 PreviewReleased: 10-07-17Register to download
Changes since previous version:
CIMCO Edit 8.01.17
  • Heidenhain filter: Fix issue with 5D movements.
CIMCO Edit 8.01.16 PreviewReleased: 04-07-17Register to download
Changes since previous version:
CIMCO Edit 8.01.16
  • No changes in this version. Released as part of CIMCO Software version 8.01.16
CIMCO Edit 8.01.15 PreviewReleased: 26-06-17Register to download
Changes since previous version:
CIMCO Edit 8.01.15
  • No changes in this version. Released as part of CIMCO Software version 8.01.15
CIMCO Edit 8.01.14 PreviewReleased: 21-06-17Register to download
Changes since previous version:
CIMCO Edit 8.01.14
  • Updated Fanuc filter: Fixes wrong tool reported in backplot when simulating file.
  • Updated Siemens filter.
  • Updated DXF exporting.
CIMCO Edit 8.01.13 PreviewReleased: 20-06-17Register to download
Changes since previous version:
CIMCO Edit 8.01.13
  • No changes in this version. Released as part of CIMCO Software version 8.01.13
CIMCO Edit 8.01.12 PreviewReleased: 07-06-17Register to download
Changes since previous version:
CIMCO Edit 8.01.12
  • No changes in this version. Released as part of CIMCO Software version 8.01.12
CIMCO Edit 8.01.11 PreviewReleased: 26-05-17Register to download
Changes since previous version:
CIMCO Edit 8.01.11
  • No changes in this version. Released as part of CIMCO Software version 8.01.11
CIMCO Edit 8.01.10 PreviewReleased: 15-05-17Register to download
Changes since previous version:
CIMCO Edit 8.01.10
  • No changes in this version. Released as part of CIMCO Software version 8.01.10
CIMCO Edit 8.01.09 PreviewReleased: 11-05-17Register to download
Changes since previous version:
CIMCO Edit 8.01.09
  • No changes in this version. Released as part of CIMCO Software version 8.01.09
CIMCO Edit 8.01.08 PreviewReleased: 05-05-17Register to download
Changes since previous version:
CIMCO CNC-Calc 8.01.08
  • Fixed bug where not all the layer names from a DXF file was captured correctly.
CIMCO Edit 8.01.07 PreviewReleased: 27-04-17Register to download
Changes since previous version:
CIMCO Edit 8.01.07
  • No changes in this version. Released as part of CIMCO Software version 8.01.07
CIMCO Edit 8.01.06 PreviewReleased: 25-04-17Register to download
Changes since previous version:
CIMCO CNC-Calc 8.01.06
  • Problem with CNC-Calc crashing when Pocket Parameters where saved is fixed.
CIMCO Edit 8.01.05 PreviewReleased: 19-04-17Register to download
Changes since previous version:
CIMCO Edit 8.01.05
  • Fixed a regression in Edit that could cause occasional crashes.
CIMCO Edit 8.01.04 PreviewReleased: 19-04-17Register to download
Changes since previous version:
CIMCO Edit 8.01.04
  • No changes in this version. Released as part of CIMCO Software version 8.01.04
CIMCO Edit 8.01.03 PreviewReleased: 18-04-17Register to download
Changes since previous version:
CIMCO Edit 8.01.03
  • Fixes an issue where Favorites under Macro in NCAssistant is always selected as the default value on startup.
  • Add any angle chamfering option. Regular chamfering opeation fixed.
CIMCO CNC-Calc 8.01.03
  • Problem with CNC-Calc crashing when Pocket Parameters where saved is fixed.
CIMCO Edit 8.01.02 PreviewReleased: 10-04-17Register to download
Changes since previous version:
CIMCO Edit 8.01.02
  • No changes in this version. Released as part of CIMCO Software version 8.01.02
CIMCO Edit 8.01.01 PreviewReleased: 07-04-17Register to download
Changes since previous version:
CIMCO Edit 8.01.01
  • Fixes an issue where the selected macro in the NC Assistant is not reflected with the selected macro in the Ribbon and vice versa.
CIMCO CNC-Calc 8.01.01
  • Fix a regression of CNC-Calc that was caused in 8.01.00
CIMCO Edit 8.01.00 PreviewReleased: 30-03-17Register to download
Changes since previous version:
CIMCO Edit 8.01.00
  • Backstage File Information page now shows file information for all valid file types.
  • Fixed an unlocalizable string in Backstage Recent Documents page.
  • Swapped the Cancel and OK buttons in the Compare With dialog to be consistent with other dialogs in the Editor.
  • Fix a layout issue in Backplot that caused some controls to be clipped when simulation is running.
  • Fixed an issue preventing CIMCO Edit from automatically closing on inactivity.
CIMCO Edit 8.00.48 PreviewReleased: 24-03-17Register to download
Changes since previous version:
CIMCO Edit 8.00.48
  • No changes in this version. Released as part of CIMCO Software version 8.00.48
CIMCO Edit 8.00.47 PreviewReleased: 23-03-17
Changes since previous version:
CIMCO Edit 8.00.47
  • Rectangular Pocket (251) and Slot (253) cycles improved. Several other cycles has smal fixes and updates T953.
  • Fixes in parameter calculations (preventing program from hanging under certain conditions) T978.
  • Improved cutter compensation with full circle movement T925.
  • Updated Mazak ISO Filter
CIMCO CNC-Calc 8.00.47
  • The CAM Kernels have ben updated in order to fix a bug in Roughing and Finish Turning.
CIMCO Edit 8.00.46 PreviewReleased: 16-03-17Register to download
Changes since previous version:
CIMCO Edit 8.00.46
  • No changes in this version. Released as part of CIMCO Software version 8.00.46
CIMCO Edit 8.00.45 PreviewReleased: 15-03-17Register to download
Changes since previous version:
CIMCO Edit 8.00.45
  • No changes in this version. Released as part of CIMCO Software version 8.00.45
CIMCO Edit 8.00.44 PreviewReleased: 7-03-17Register to download
Changes since previous version:
CIMCO Edit 8.00.44
  • Fixed an issue with saving to files with the HIDDEN attribute set.
CIMCO Edit 8.00.43 PreviewReleased: 03-03-17Register to download
Changes since previous version:
CIMCO CNC-Calc 8.00.43
  • Error with loading DXF Splines corrected.
CIMCO Edit 8.00.42 PreviewReleased: 03-03-17Register to download
Changes since previous version:
CIMCO Edit 8.00.42
  • No changes in this version. Released as part of CIMCO Software version 8.00.42
CIMCO Edit 8.00.41 PreviewReleased: 27-02-17Register to download
Changes since previous version:
CIMCO Edit 8.00.41
  • Heidenhain filter: Fixed cylces 208, 232, 256,257, 262 and 267.
CIMCO Edit 8.00.40 PreviewReleased: 17-02-17Register to download
Changes since previous version:
CIMCO Edit 8.00.40
  • File Compare now jumps to next/previous difference relative to cursor position.
CIMCO Edit 8.00.39 PreviewReleased: 10-02-17
Changes since previous version:
CIMCO Edit 8.00.39
  • Fix an issue where Keyboard Shortcuts customizations were not persisted correctly.
CIMCO Edit 8.00.38 PreviewReleased: 06-02-17
Changes since previous version:
CIMCO Edit 8.00.38
  • No changes in this version. Released as part of CIMCO Software version 8.00.38
CIMCO Edit 8.00.37 PreviewReleased: 02-02-17Register to download
Changes since previous version:
CIMCO Edit 8.00.37
  • Heidenhain filter: Improved work with Q-parameters.Add calculations safety check.
  • Siemens filter: Support of advanced tool naming T='Alpha_Numerical_tool_name' is allowed.
  • Advanced Renumbering: Ignoring numbers inside brackets while renumbering.
CIMCO Edit 8.00.36 PreviewReleased: 26-01-17Register to download
Changes since previous version:
CIMCO Edit 8.00.36
  • No changes in this version. Released as part of CIMCO Software version 8.00.36
CIMCO Edit 8.00.35 PreviewReleased: 24-01-17Register to download
Changes since previous version:
CIMCO Edit 8.00.35
  • Okuma, Mazak, Heidenhain, Heidiso filters: Use 'Block Number - N' instead of 'Tool Number – T' in Toolpath Statistics.
  • Heidenhain filter: Fixed issue with Z/W values.
  • Willemin filter: Fixed plotting issues.
CIMCO Edit 8.00.34 PreviewReleased: 20-01-17
Changes since previous version:
CIMCO Edit 8.00.34
  • Okuma filter: Filter updated.
  • Siemens filter: Add support for RP= and AP=, G110/G111/G112, and polar coordinates.
CIMCO Edit 8.00.33 PreviewReleased: 17-01-17
Changes since previous version:
CIMCO Edit 8.00.33
  • No changes in this version. Released as part of CIMCO Software version 8.00.33
CIMCO Edit 8.00.32 PreviewReleased: 10-01-17Register to download
Changes since previous version:
CIMCO Edit 8.00.32
  • Prevented Editor Standard from grabbing Editor Pro licenses from the License Server if standard licenses are available.
CIMCO Edit 8.00.31 PreviewReleased: 06-01-17Register to download
Changes since previous version:
CIMCO Edit 8.00.31
  • Mazak Viewer updated.
CIMCO CNC-Calc 8.00.31
  • Calculation of the snap distances now uses the square distance to to find the shortest distance. Thereby the calls to the square root functions has been eliminated and performance enhanced.
CIMCO Edit 8.00.30 PreviewReleased: 04-01-17Register to download
Changes since previous version:
CIMCO Edit 8.00.30
  • Added Formulas to Edit example Macros.
  • Fix an issue with Macros containing Formulas.
CIMCO Edit 8.00.29 PreviewReleased: 02-01-17Register to download
Changes since previous version:
CIMCO Edit 8.00.29
  • Heidenhain filter: Fixed work with subroutines.
  • Heidenhain filter: Fixed bugs in parameter programming.
  • Heidenhain filter: Added PLANE PROJECTED and PLANE POINTS commands.
  • Heidenhain filter: Fixed polar coordinates movements.
  • Fanuc filter: Fixed G68.2 command.
  • Added the ability to Mirror Toolpath on Turning programs.
CIMCO Edit 8.00.28 PreviewReleased: 22-12-16Register to download
Changes since previous version:
CIMCO Edit 8.00.28
  • Advanced Renumbering: Block skip added.
  • Editor now uses ConfigPaths.cfg from old installations (if it exists) to import configuration files.
CIMCO CNC-Calc 8.00.28
  • Bug with Tolerances not being used in Constant Cut Milling has been corrected.
  • Added fanuc NO K and heidenhain incremental postprocessors.
CIMCO Edit 8.00.27 PreviewReleased: 16-12-16Register to download
Changes since previous version:
CIMCO Edit 8.00.27
  • Advanced Renumbering can now ignore lines starting with defined parameters.
  • Fanuc filter updated.
  • Fixed issue preventing Cimco Edit from being able to automatically closing.
CIMCO Edit 8.00.26 PreviewReleased: 05-12-16Register to download
Changes since previous version:
CIMCO Edit 8.00.26
  • No changes in this version. Released as part of CIMCO Software version 8.00.26
CIMCO Edit 8.00.25 PreviewReleased: 01-12-16Register to download
Changes since previous version:
CIMCO Edit 8.00.25
  • Filters updated.
  • Mazatrol Viewer: Improved Matrix functions.
CIMCO Edit 8.00.24 PreviewReleased: 23-11-16Register to download
Changes since previous version:
CIMCO CNC-Calc 8.00.24
  • Problem with Turning Post Processors MOVE_LAST variable solved.
CIMCO Edit 8.00.23 PreviewReleased: 16-11-16Register to download
Changes since previous version:
CIMCO Edit 8.00.23
  • Fixed issue with limitation of macro inputs fields to max 15 characters.
CIMCO Edit 8.00.22 PreviewReleased: 11-11-16Register to download
Changes since previous version:
CIMCO Edit 8.00.22
  • Fixed a crash when closing files on slow file systems, such as network shares, with response times in the seconds range.
CIMCO Edit 8.00.21 PreviewReleased: 10-11-16Register to download
Changes since previous version:
CIMCO CNC-Calc 8.00.21
  • Error with splines with polynomial = 1 but 3 control points corrected. Now we use the first and last control point to create the line.
CIMCO Edit 8.00.20 PreviewReleased: 08-11-16Register to download
Changes since previous version:
CIMCO Edit 8.00.20
  • Fixed error when saving hidden files.
CIMCO Edit 8.00.19 PreviewReleased: 02-11-16Register to download
Changes since previous version:
CIMCO Edit 8.00.19
  • No changes in this version. Released as part of CIMCO Software version 8.00.19
CIMCO Edit 8.00.18 PreviewReleased: 31-10-16Register to download
Changes since previous version:
CIMCO Edit 8.00.18
  • Added ISO Turning G2<->G3 (beta) filter.
  • Fixed issues with Traub simulation.
CIMCO Edit 8.00.17 PreviewReleased: 28-10-16Register to download
Changes since previous version:
CIMCO Edit 8.00.17
  • Fixed DNC Client not showing ports in editor when NCBase login is used
CIMCO Edit 8.00.16 PreviewReleased: 26-10-16Register to download
Changes since previous version:
CIMCO CNC-Calc 8.00.16
  • Problem with splines loaded from DXF has been corrected.
CIMCO Edit 8.00.15 PreviewReleased: 24-10-16Register to download
Changes since previous version:
CIMCO Edit 8.00.15
  • Scroll bars now correctly drawn when using double-click to open files.
CIMCO Edit 8.00.14 PreviewReleased: 14-10-16Register to download
Changes since previous version:
CIMCO Edit 8.00.14
  • It is now possible to define parameters in a macro as a multiple-choice option. The choices will be available as a drop-down combobox when inserting the macro. Visible labels in the combobox and inserted values can be set individually.
  • Loading of Ribbon customization is now silent.
CIMCO Edit 8.00.13 PreviewReleased: 10-10-16Register to download
Changes since previous version:
CIMCO Edit 8.00.13
  • Fixed a race condition which could cause crashes on slow file systems.
  • Updated german help.
CIMCO CNC-Calc 8.00.13
  • Updated CNC-Calc help.
CIMCO Edit 8.00.12 PreviewReleased: 03-10-16Register to download
Changes since previous version:
CIMCO Edit 8.00.12
  • No changes in this version. Released as part of CIMCO Software version 8.00.12
CIMCO Edit 8.00.11 PreviewReleased: 28-09-16Register to download
Changes since previous version:
CIMCO Edit 8.00.11
  • Macro dropdown lists now auto resizes to try and fit largest found text entry.
  • Changed Editor macro controls order.
  • Added tab colors to indicate file status (changed, read-only).
CIMCO Edit 8.00.10 PreviewReleased: 23-09-16Register to download
Changes since previous version:
CIMCO Edit 8.00.10
  • No changes in this version. Released as part of CIMCO Software version 8.00.10
CIMCO Edit 8.00.09 PreviewReleased: 22-09-16Register to download
Changes since previous version:
CIMCO Edit 8.00.09
  • Macro favorites added. In Macro Setup dialog, macros can be favorited using the 'star' icon. Favorited macros will be shown in the new 'favorite' macro group.
CIMCO Edit 8.00.08 PreviewReleased: 09-09-16Register to download
Changes since previous version:
CIMCO CNC-Calc 8.00.08
  • Undo and Redo now works when drawing workspace is changed in Document.
CIMCO Edit 8.00.07 PreviewReleased: 05-09-16Register to download
Changes since previous version:
CIMCO Edit 8.00.07
  • Fixed a number of issues when editing files with percentage (%) in the filename.
  • Fanuc filter: Fixed issue with G43 H command.
CIMCO Edit 8.00.06 PreviewReleased: 30-08-16Register to download
Changes since previous version:
CIMCO Edit 8.00.06
  • Fixed issue where an extra line would be inserted after advanced renumbering.
  • Backplot filters renamed to reflect working status better.
  • Fixed issues with time statistics.
CIMCO CNC-Calc 8.00.06
  • Added CNC-Calc Redo functionality.
CIMCO Edit 8.00.05 PreviewReleased: 23-08-16Register to download
Changes since previous version:
CIMCO Edit 8.00.05
  • Fixed crash when using close-and-save on slow filesystems.
CIMCO Edit 8.00.04 PreviewReleased: 22-08-16Register to download
Changes since previous version:
CIMCO Edit 8.00.04
  • Fixed memory leak in Cimco Edit.
  • Fixed issue with time statistic.
  • When setting up a macro in the Editor, it is now possible to specify a unique illustration for each individual parameter in the macro.
CIMCO Edit 8.00.03 PreviewReleased: 17-08-16Register to download
Changes since previous version:
CIMCO Edit 8.00.03
  • Redesigned Advanced Open dialog.
  • Fixed issues with Advanced Renumbering.
  • Fixed a problem where statusbar Linenumber/Column numbers were swapped.
  • Fixed problem where file windows could not be restored correctly after doing file compare of non-maximized windows.
CIMCO Edit 8.00.02 PreviewReleased: 04-08-16Register to download
Changes since previous version:
CIMCO Edit 8.00.02
  • Clicking Browse in Advanced Open now browses to the last selected directory.
  • Editor FTP configuration sheet made more clear.
  • Fixed a number of issues to do with File Compare.
  • It is no longer possible to change filter while simulation is running.
  • Fixed problem with external commands when ncbase is active.
  • Fix an issue where multiple document window arrangement functionality was not working as expected.
CIMCO CNC-Calc 8.00.02
  • Bug with cursor that moved when text was entered has been fixed.
CIMCO Edit 8.00.01 PreviewReleased: 13-07-16Register to download
Changes since previous version:
CIMCO Edit 8.00.01
  • No changes in this version. Released as part of CIMCO Software version 8.00.01
CIMCO Edit 8.00.00 PreviewReleased: 24-06-16Register to download
Changes since previous version:
CIMCO Edit 8.00.00
  • Read our news about CIMCO Software 8 here
  • Redesigned modern user-interface with fully customizable ribbon
  • New FTP client integrated with the Editor transmission utility
  • New advanced Open File dialog
  • Improved document editing features
  • Improved backplotting and more converters have been added
CIMCO CNC-Calc 8.00.00
  • New strategy added: Constant Cut Inside Out
  • New strategy added: Constant Cut Inside In
  • New strategy added: Constant Cut Turning
  • Improved help system with illustrations