CIMCO Software 5 Releases
Release notesExpand allCollapse all
Changes since previous version:
CIMCO DNC-Max 5.60.80
- Fixed problem with the Moxa E1210 I/O device.
Changes since previous version:
CIMCO NC-Base 5.60.79
- Added option to set transfer limit when changing program status to 'Updating'. Ref: Database/Setup/Server Settings/Logging/ Set Transfer Count to 1 when status set to 'Updating'
CIMCO Software 5.60.78 Released: 20-10-10Changes since previous version:
CIMCO DNC-Max 5.60.78
- Added option to send ISO files with CR/LF in the Mazak protocol. Ref: Port/Configure Port/ISO Transfer/ISO Options/Send with CR/LF
- Added option to strip existing %'s when sending ISO files in the Mazak protocol. Ref: Port/Configure Port/ISO Transfer/ISO Options/ Strip original %'s when sending
Changes since previous version:
CIMCO DNC-Max 5.60.77
- Added option in translators to match previous line. Ref: ../Translators/Previous line also matched
- Fixed problem using auto recive append to existing file when the file was on the NC-Base import queue.
Changes since previous version:
CIMCO DNC-Max 5.60.76
- Added support for sending custom Mazatrol programs in the Mazak protocol.
Changes since previous version:
CIMCO Edit 5.60.75
- Updated backplot.
CIMCO DNC-Max 5.60.75
- Fixed problem with the 'Delete Directories' option when auto receiving associated files in the directory monitor template.
- Fixed crash in the directory monitor protocol.
Changes since previous version:
CIMCO Edit 5.60.74
- Updated Mazatrol viewer.
- Fixed backplot tool size problem.
CIMCO DNC-Max 5.60.74
- Added option to use file with the same name as the directory as the main program file when receiving associated files in the directory monitor template. Ref: Port/Configure Port/Auto Receive/Set/Associated Files/ Main prg. same name as folder
- Added 'Siemens WPD Folder Auto Receive' template.
- Fixed problem with the 'Delete Directories' option when auto receiving associated files in the directory monitor template.
Changes since previous version:
CIMCO Edit 5.60.73
- Added support for shoing additional tool information in the Mazatrol viewer.
CIMCO DNC-Max 5.60.73
- Fixed problem with extracting the program comment from the main file when associating multiple sub-programs in NC-Base.
CIMCO NC-Base 5.60.73
- Fixed problem specifying directory mode when adding a new machine in some cases.
Changes since previous version:
CIMCO NC-Base 5.60.72
- Changed messages for manual transfers when receiving Mazatrol files.
Changes since previous version:
CIMCO DNC-Max 5.60.71
- Fixed problem with the Moxa E1210 I/O device.
CIMCO NC-Base 5.60.71
- Removed limitation on 'Max Lines' for the program format triggers.
Changes since previous version:
CIMCO DNC-Max 5.60.70
- Added option to scan remote request barcoded without a prefix using a maximum lenght to determin when the received data is a barcode. Ref: Port/Configure Port/Remote Request/Set/Advanced/Max barcode length
CIMCO MDC-Max 5.60.70
- Fixed problem setting DBVAR1-4 based on log file name when NC-Base was configured to show files relative to the base directory.
Changes since previous version:
CIMCO Edit 5.60.69
- Updated Mazatrol viewer.
CIMCO MDC-Max 5.60.69
- Added additional colors to the live screen.
CIMCO NC-Base 5.60.69
- Changed manual send/receive so 'Modfied By' is not updated.
- Changed auto import of .zip files with sub-directories to keep the sub-directory structure.
Changes since previous version:
CIMCO Edit 5.60.68
- Updated translations.
CIMCO DNC-Max 5.60.68
- Updated translations.
Changes since previous version:
CIMCO NC-Base 5.60.67
- Fixed problem selecting server on the logon dialog.
Changes since previous version:
CIMCO NC-Base 5.60.66
- Added support for searching programs on the import queue received by DNC-Max programs.
Changes since previous version:
CIMCO Edit 5.60.65
- Updated backplot converters.
- Fixed Japanese font problem in the Mazatrol viewer.
CIMCO DNC-Max 5.60.65
- Fixed problem with backups not added to NC-Base. (Introduced in 5.60.59).
CIMCO NC-Base 5.60.65
- Changed Open / Open With... to allow editing of XML files.
Changes since previous version:
CIMCO NC-Base 5.60.64
- Fixed problem with program copy not copying database fields. (Introduced in 5.60.56).
Changes since previous version:
CIMCO MDC-Max 5.60.63
- Fixed problem when adding or changing order of live- and operator screens.
CIMCO NC-Base 5.60.63
- Fixed logon problem when using multiple servers of different type.
Changes since previous version:
CIMCO Edit 5.60.62
- Updated translations.
CIMCO DNC-Max 5.60.62
- Updated translations.
CIMCO NC-Base 5.60.62
- Added support for searching only auto imported programs.
Changes since previous version:
CIMCO DNC-Max 5.60.61
- Added support for sending FAPT files from other DNC systems.
- Fixed crash in the mazak protocol.
Changes since previous version:
CIMCO Edit 5.60.60
- Added support for Mazak MT640 Pro. files without headers in the Mazatrol viewer.
- Updated tool list generator.
- Updated backplot converters.
CIMCO NC-Base 5.60.60
- Fixed problem sending NC-Base notifications in some cases.
Changes since previous version:
CIMCO Edit 5.60.59
- Added option to force tool list generator to scan for tool information below the tool change. Ref: Setup/Global Setup/File Types/Tool list/ Scan comments below tool name
- Fixed problem specifying colors for characters other than letters.
CIMCO NC-Base 5.60.59
- Added option to force tool list generator to scan for tool information below the tool change. Ref: Database/Setup/Machine/Templates/Scan comments below tool name
- Changed NC-Base to ignore auto import compare option, and only add backup when received file is different.
Changes since previous version:
CIMCO NC-Base 5.60.58
- Fixed problem with database field 1 title missing. (Introduced in 5.60.56).
- Fixed problem with the "No versioning until approved/checked" option.
Changes since previous version:
CIMCO DNC-Max 5.60.57
- Added support for remote questing that main + sub-programs are send as a zip file when using the directory monitor protocol.
- Fixed problem with incorrect timestamps on files send inside .zip files.S
CIMCO NC-Base 5.60.57
- Modified change comments to store last response in the users configuration directory.
Changes since previous version:
CIMCO CNC-Calc 5.60.56
- Added option to output G0/G1/.. as G00/G01/... Ref: Setup/Machine Type/Output G0x
- Added option to output FMAX as F9999 when generating Heidenhain code. Ref: Setup/Machine Type/Output FMAX as F9999
CIMCO MDC-Max 5.60.56
- Added option to save client settings for all user in the same location or separately. Ref: Setup/System Setup/Client Settings/Share settings between all users
- Fixed problem with using Logoff from the setup menu causing a rebuild.
CIMCO NC-Base 5.60.56
- Added option to specify pre-defined values for each of the database fields. Ref: Database/Setup/Predefinded Fields
- Added $DBSTATUS status variable to setup sheets etc.
- Fixed problem exporting program lists to Excel in some cases.
- Fixed 'Manual request to send locked filed denied' message in the program log when remote requesting a locked file. New message is 'Remote request to send locked filed denied'.
Changes since previous version:
CIMCO Edit 5.60.55
- Added support for using a cylindrical stock in the solid verification.
- Changed 'Color entire line' option to not color comments/block skips.
- Fixed problem using tools with alpha numerical names in the backplot. (ex. TT="Roughing Tool D12")
- Fixed problem with multi line comment colors not updating correctly when modal colors were disabled.
Changes since previous version:
CIMCO DNC-Max 5.60.54
- Improved NC-Base converter.
Changes since previous version:
CIMCO Edit 5.60.53
- Fixed problem using the measure function when backplot window lost focus.
CIMCO DNC-Max 5.60.53
- Fixed problem auto importing programs. (Introduced in 5.60.51).
Changes since previous version:
CIMCO DNC-Max 5.60.52
- Added support for generating MDC messages using DNCMaxCtrl.exe Ex. DNCMaxCtrl.exe -c -q -m -a dncsrv -p "Fanuc 15i" JOBSTART
Changes since previous version:
CIMCO Edit 5.60.51
- Fixed problem printin Japanese Mazatrol files.
CIMCO DNC-Max 5.60.51
- Added support for sending main + sub-programs in zip file when using the directory monitor protocol. Ref: Port/Configure Port/Other/ Send NC-Base main + sub--programs as a .ZIP file
CIMCO NC-Base 5.60.51
- Added support for auto importing main and sub-programs from a zip file.
Changes since previous version:
CIMCO Edit 5.60.50
- Updated backplot converters.
- Fixed crash when closing multiple backplot windows using 'Close All'.
CIMCO DNC-Max 5.60.50
- Added support for Moxa ioLogik E1210 devices.
Changes since previous version:
CIMCO Edit 5.60.49
- Updated Mazatrol viewer.
CIMCO DNC-Max 5.60.49
- Added support for remote resetting multi port device servers when using NPort direct / Quatech Intellisock.
- Fixed problem disabling the 'smart scanning' option in the directory monitor protocol.
Changes since previous version:
CIMCO Edit 5.60.48
- Fixed problem when opening Mazatrol file type where machine type was not licensed in the keyfile.
CIMCO NC-Base 5.60.48
- Fixed problem setting programs to read-only when 'Set un-locked files read-only' was enabled.
Changes since previous version:
CIMCO Edit 5.60.47
- Added option to specify font used for viewing Mazatrol files.
- Updated Mazatrol viewer for Mazak M640M and M640T.
CIMCO NC-Base 5.60.47
- Fixed 'Communication link failure' error after loosing the connection to a MS SQL server.
Changes since previous version:
CIMCO Edit 5.60.46
- New CNC-Calc Turning Roughing implementation with support for finishing passes.
- Updated remote support client.
CIMCO DNC-Max 5.60.46
- Added support for handling 'Job Directories' stored under the NC-Base machine directory in the directory monitor protocol. Ref: Port/Configure Port/Advanced/Other/Job Directories
- Updated remote support client.
- Fixed problem with DNC-Max client hanging when unable to resolve address of one or more servers specified in the fixed server address field. (Introduced in 5.60.45).
- Fixed problem with sending from line number from NC-Base client was sending from line before requested line.
- Fixed problem with sending files from NC-Base. (Introduced in 5.60.43).
CIMCO NC-Base 5.60.46
- Fixed problem with incorrect update of associated file names when changing a field used as field folder.
Changes since previous version:
CIMCO Edit 5.60.45
- Updated backplot converters.
- Fixed problem selecting tool lists templates with a long path/name.
CIMCO DNC-Max 5.60.45
- Changed DNC-Max client to accept multiple server names in the fixed server address field. To specify multiple servers separate them with commas.
- Fixed problem with remote reqest file operations not working correctly when the NC-Base 'Show filenames relative to base dir.' was selected.
CIMCO NC-Base 5.60.45
- Fixed problem with base directory setting not updated in some cases when restoring database to a new base directory.
- Fixed problem moving associated files to the database directory when 'Set Locked Offline' files was activated.
Changes since previous version:
CIMCO NC-Base 5.60.44
- Fixed 'File not found' error when changing the program destination while adding a new program.
- Fixed problem with the 'Send e-mail notifications' option not always saved.
Changes since previous version:
CIMCO Edit 5.60.43
- Updated backplot converters.
CIMCO NC-Base 5.60.43
- Added option to send e-mails when programs are locked/un-locked/restored/ imported/received. Ref: Database/Setup/Server/Send e-mail notifications Ref: Database/Setup/User Groups/Send e-mail when ...
Changes since previous version:
CIMCO Edit 5.60.42
- Added support for panning/zooming in backplot while meassuring.
- Added basic Hidenhain ISO, Fanuc Robot and APT backplot viewers.
CIMCO DNC-Max 5.60.42
- Added option to block remote requests if the requested file is also present in the specified 'blocked' directory. Ref: Setup/Configure Port/Remote Request/Set/Other Settings/ Block transfer if reqested file found in the following directory
- Changed external log export to Excel to use .XLSX extension for generated spreadsheets when specifying an .XLSX file as template.
- Fixed problem with incorrect FTP directory listing in some cases when multiple FTP clients were connected.
- Fixed problem with the FTP 'DIsable directory change' option not working in some cases.
CIMCO NC-Base 5.60.42
- Fixed problem with invalid locked/import directory in some cases.
Changes since previous version:
CIMCO Edit 5.60.41
- Added support for specifying a block skip string longer than 1 character in the machine setup.
CIMCO DNC-Max 5.60.41
- Fixed problem extracting auto receive name from some binary files.
Changes since previous version:
CIMCO Edit 5.60.40
- Updated Mazatrol viewer.
- Updated backplot.
CIMCO DNC-Max 5.60.40
- Added option to remote request files using an alternate NC-Base field. Ref: Setup/Configure Port/Remote Request/Set/Advanced/ NC-Base field to match
CIMCO NC-Base 5.60.40
- Fixed problem with invalid locked/import directory in some cases.
Changes since previous version:
CIMCO Edit 5.60.39
- Added support for coloring multi line comments. Ref: Setup/File types/Machine/Enable multi line comments
- Added Deckel Dialog 4 backplot support.
- Added simple Fanuc Laser/Plasma/Punch backplot support.
- Added support for view Mazak SmartTurn mazatrol files.
- Improved layout of pictures on macro dialog.
- Fixed problem with the macro 'Use sign' option in some cases.
CIMCO DNC-Max 5.60.39
- Changed DNC-Max client to always show 'Edit' button on the Send/Receive file dialog.
- Fixed problem with the 'Export no-name programs' option not working in some cases.
CIMCO NC-Base 5.60.39
- Fixed problem specifying the delete directory.
Changes since previous version:
CIMCO Edit 5.60.38
- Updated Mazatrol viewer.
- Updated CNC-Calc.
CIMCO DNC-Max 5.60.38
- Added option to send only files in remote request directories when using 'Lookup requested files in database'. Ref: Setup/Configure Port/NC-Base Settings/ Only send files in request directories
CIMCO MDC-Max 5.60.38
- Added support for specifying negative values in integer input fields on operator screens.
- Fixed problem re-building data in some cases.
CIMCO NC-Base 5.60.38
- Added permission setting to show files in machine base directory only. Ref: Database/Setup/User Groups/View machine directory only
- Changed 'Copy Program' to copy program file note also.
CIMCO Software 5.60.37 Released: 17-03-10Changes since previous version:
CIMCO Edit 5.60.37
- Added support for simulating sub-programs from external files in the Heidenhain simulation.
- Fixed problem with missing input fields in some cases when a macro picture was selected.
Changes since previous version:
CIMCO Edit 5.60.36
- Fixed feedrate problem in CNC-Calc.
Changes since previous version:
CIMCO Edit 5.60.35
- Updated Mazak Mazatrol viewer.
CIMCO MDC-Max 5.60.35
- Added support for using DATAVAR[]/DBVAR[]/EXCELVAL[] in table/graph columns.
Changes since previous version:
CIMCO MDC-Max 5.60.34
- Changed counter values set using the add/set conditions to display the last value set on tables/graphs.
Changes since previous version:
CIMCO MDC-Max 5.60.33
- Added support for SWITCHCHANGED[]
- Added support for filtering eventlog by message.
- Changed event logs to aling columns according to type of value.
- Fixed problem with setting the evaluation time for timers.
- Fixed problem using 'Today' and 'Yesterday' in interval selections.
Changes since previous version:
CIMCO Edit 5.60.32
- Fixed problem using the /t command line option together with /plotonly
CIMCO DNC-Max 5.60.32
- Fixed problem with the 'Do not place received files on the import queue' option not copying the received file.
CIMCO NC-Base 5.60.32
- Fixed problem comparing imported file with original file when multiple imports per program was enabled.
- Fixed problem with users having only lock or un-lock permissions.
Changes since previous version:
CIMCO Edit 5.60.31
- Updated Mazak Mazatrol viewer.
CIMCO DNC-Max 5.60.31
- Added option to split files with sub-programs into separate files when send to an FTP server. Ref: Port/Configure Port/Advanced/Other/ Split sub-prgs into separate files Ref: Port/Configure Port/Advanced/Other/Add '%' lines when splitting
- Fixed problem remote requesting files using ISO request programs in the Hurco Conversational protocol.
- Fixed server crash in some cases when no location for temp files could be found.
CIMCO MDC-Max 5.60.31
- Fixed problem with using TIMERLAST[] / TIMERPREV[] when timer was defined with Start/Restart/Clear condition but no Stop condition.
Changes since previous version:
CIMCO Edit 5.60.30
- Updated Mazak Mazatrol viewer.
CIMCO NC-Base 5.60.30
- Fixed problem selecting a new program file when adding a new program.
- Fixed problem with the 'Use UNC path' option no always used when adding program files.
Changes since previous version:
CIMCO MDC-Max 5.60.29
- Fixed problem reading EXCELVAR[1-4] in some cases.
CIMCO NC-Base 5.60.29
- Added option to disable the transfer limit for individual machines. Ref: Database/Setup/Machines/Advanced/Disable transfer limit
- Added option to specify the default transfer limit per machine. Ref: Database/Setup/Server Settings/Advanced/ Set transfer limit per machine Ref: Database/Setup/Machines/Advanced/default Transfer Limit
Changes since previous version:
CIMCO Edit 5.60.28
- Updated CNC-Calc Deckel Dialog 4 format.
CIMCO DNC-Max 5.60.28
- Fixed server crash when running MDC-Max connector. (Introduced in 5.60.27).
Changes since previous version:
CIMCO Edit 5.60.27
- Added button to remove image from macros.
- Updated CNC-Calc.
CIMCO DNC-Max 5.60.27
- Improved direct driver connection time with many systems offline.
CIMCO MDC-Max 5.60.27
- Added support for adding/setting/decrementing counters.
- Added support for selecting MSGFIELD[] in the expression wizard.
- Fixed problem with the COUNTERCHANGED[] function.
- Fixed problem using MSGFIELD[] in composite formulas.
Changes since previous version:
CIMCO Edit 5.60.26
- Added support for associating pictures with macros.
- Changed cycle/macro setup to check for user configuration password.
- Fixed problem with unicode files opened in the Mazatrol viewer in some cases.
- Fixed crash when comparing some Mazatrol files.
CIMCO DNC-Max 5.60.26
- Fixed delay when updating monitor log while database backup was running.
CIMCO MDC-Max 5.60.26
- Added 4 additional data variables in the Program/Job setup. Ref: Setup/System Setup/Program\Job Setup/Set DATAVAR[5-8]
Changes since previous version:
CIMCO Edit 5.60.25
- Added Deckel 4 support in CNC-Calc.
- Added Mazatrol sample files in the \Samples directory.
- Updated Mazatrol viewer.
CIMCO DNC-Max 5.60.25
- Changed DNC-Max client Send/Receive buttons to grayed when selecting a machine that does not support manual file transfer.
CIMCO NC-Base 5.60.25
- Added option to disable the 'Set program read/write' prompt when editing read only programs. Ref: Database/Setup/Server Settings/Advanced/Do not prompt to set programs read/write in editor
- Changed Log Prompts to allow selecting 'Answer Required' for program and associated file edits.
- Fixed problem restoring database backup to a new base directory in some cases.
Changes since previous version:
CIMCO DNC-Max 5.60.24
- Fixed problem with the Quatech Direct driver leaking connection when using the restart port feature.
Changes since previous version:
CIMCO Edit 5.60.23
- Updated backplot converters.
- Fixed problem loading some DXF files in CNC-Calc.
CIMCO DNC-Max 5.60.23
- Added option to create sub-directories relative to a directory sending files using the directory monitor. Ref: Port/Configure Port/Directory Scan/Map sub-directories from
- Added option to delete extensions specified as associated files in auto receive sets in the directory monitor. Ref: Port/Configure Port/Directory Scan/Delete associated file extensions
- Added option to scan for associated files above the main program file directory in the directory monitor protocol. Ref: Port/Configure Port/Auto Receive/Set/Associated Files/ Scan other auto receive dirs.
CIMCO NC-Base 5.60.23
- Improved the NC-Base server upgrade function to correct errors deteced during the install process.
- Fixed crash when deleting multiple programs/files in some cases.
CIMCO Software 5.60.22 Released: 20-01-10Changes since previous version:
CIMCO DNC-Max 5.60.22
- Added option to keep sub-directories when auto importing associated files in the directory monitor protocol. Ref: Port/Configure Port/Auto Receive/Set/Associated Files/ Keep sub-directory structure
- Added option to delete empty directories after auto receiving associated files in the directory monitor protocol. Ref: Port/Configure Port/Auto Receive/Set/Associated Files/ Delete empty directories
- Fixed problem copying associated files in sub directories when using the directory monitor send function.
CIMCO NC-Base 5.60.22
- Added additional warning messages if database table corruption is detected during integrity check.
- Updated NC-Base backup server to skip file/program integrity check if database table corruption could not be repaired.
Changes since previous version:
CIMCO DNC-Max 5.60.21
- Added warning message if running service manager without administrator privileges.
- Added reminder to run service manager using 'Run As Administator' on operating systems with UAC.
- Changed end of feed timeout during looped transfers to skip to next file in loop, and not end the transfer.
- Fixed problem sending files loopen when using the 'Abort if new transfer started' option.
Changes since previous version:
CIMCO Edit 5.60.20
- Added document about using formulas to the Samples\Formulas folder.
CIMCO DNC-Max 5.60.20
- Added support for restarting Quatech devices configured with username and password.
CIMCO MDC-Max 5.60.20
- Added option to start/show the DNC-Max Client from the MDC operator screen. Ref: Setup/System Setup/Operator Screens/Show 'DNC-Max Client' button
- Added support for using multiple TEXT[] variables in a single expression. Ex.: TEXT[PORTNAME] TEXT[DATAVAR2] TEXT[ANY TEXT]
- Increased number of columns available to 8 when reading job data files.
- Fixed column ordering problem on operator screens when using the 'Read Job data file' option.
- Fixed problem reloading changed configuration when operator screen used integer input fields.
CIMCO NC-Base 5.60.20
- Fixed problem using 'Accept Imported File As' in some cases.
Changes since previous version:
CIMCO Edit 5.60.19
- Updated backplot.
Changes since previous version:
CIMCO Edit 5.60.18
- Updated backplot converters.
- Updated Brother viewer.
CIMCO DNC-Max 5.60.18
- Fixed problem using the 'Receive sub.programs (higher number and same extension as main program)' option in the directory monitor protocol.
CIMCO MDC-Max 5.60.18
- Fixed crash when generating table/graphs containing invalid modulus expressions.
- Fixed problem generating tables when specifying invalid Y-Axis range.
CIMCO NC-Base 5.60.18
- Added support for listing Mazak Matrix program comment/size in the NC-Base preview window.
- Added option to control if programs should be locked when restoring. Ref: Database/Setup/Server Settings/Advanced/Lock programs when restoring
- Added option to control if new programs should be unlocked even if user does not have permissions to unlock programs. Ref: Database/Setup/Server Settings/Advanced/Unlock new programs
- Added support for exporting program version when exporting program lists. Ref: Database/Setup/Server Settings/List Export/To File/Version Ref: Database/Setup/Server Settings/List Export/To Printer/Version
- Changed custom SQL commands to always search all machine groups.
- Changed program listing to update locked status when restoring files.
- Fixed problem backing up large databases.
- Fixed problem restoring files in some cases.
- Fixed problem with files being set to read-only when read-only is disabled in the configuration.
Changes since previous version:
CIMCO DNC-Max 5.60.17
- Added option to specify a template Excel / Access file for the log exporting. Ref: Setup/Configure Server/Log export/Template file
Changes since previous version:
CIMCO Edit 5.60.16
- Added warning message when downloading a new version and NC-Base is active.
- Updated Siemens bacplot and added sample files.
- Fixed problem previewing remote files from the docked DNC-Max client file dialog.
CIMCO MDC-Max 5.60.16
- Added option to read log variables (MSGVAR1-16) into 4 data variables in the Program/Job setup. Ref: Setup/System Setup/Program\Job Setup/Set DATAVAR[1-4]
- Added support for reading and displaying a text file (csv) when pressing a button on the operator screens. Data read is stored in MSGVAR1-16.
- Added option to select integer input field on operator screens. Ref: Setup/System Setup/Operator Screens/Input Values/ Number / Integer value
- Improved operator screen layout.
Changes since previous version:
CIMCO Edit 5.60.15
- Updated backplot converters.
CIMCO NC-Base 5.60.15
- Fixed problem with the NC-Base converter "Clean Up" option.
Changes since previous version:
CIMCO Edit 5.60.14
- Fixed problem using license server with activation keys.
CIMCO DNC-Max 5.60.14
- Fixed problem using license server with activation keys.
Changes since previous version:
CIMCO Edit 5.60.13
- Updated Mazatrol file compare colors.
- Updated Mazatrol viewer.
- Fixed problem printing some lines when printing in multiple columns.
- Fixed problem with the 'Always start in root directory' when using 'Use manual receive directory'.
CIMCO DNC-Max 5.60.13
- Fixed problem using separate auto receive directory trigger when scanning the filename in the directory monitor protocol.
CIMCO NC-Base 5.60.13
- Fixed problem linking associated files between programs from different machine groups.
Changes since previous version:
CIMCO MDC-Max 5.60.12
- Update live timeline graphs.
Changes since previous version:
CIMCO Edit 5.60.11
- Updated backplot
CIMCO CNC-Calc 5.60.11
- Added side and depth cuts to Contour and Pocket milling.
- Contour milling can now use user defined feedrates.
- Added support for negative stock to leave in rouging turning.
- Fixed problem saving Grooving parameters.
CIMCO NC-Base 5.60.11
- Added option to copy info from existing associated file when auto updating an associated files. Ref: Database/Setup/Server Settings/Associated Files/ Append existing memo file updates Ref: Database/Setup/Server Settings/Associated Files/ Append existing setup sheet updates Ref: Database/Setup/Server Settings/Associated Files/ Append existing tool list updates
Changes since previous version:
CIMCO MDC-Max 5.60.10
- Update live timeline graphs.
CIMCO NC-Base 5.60.10
- Fixed "Dump Failed" error when creating NC-Base backups.
Changes since previous version:
CIMCO MDC-Max 5.60.09
- Added support for live timeline graphs.
Changes since previous version:
CIMCO MDC-Max 5.60.08
- Added support for creating timeline graphs.
CIMCO NC-Base 5.60.08
- Added option to specify custom SQL queries. Ref: Database/Setup/Server Settings/List Export/Custome Query
Changes since previous version:
CIMCO Edit 5.60.07
- Changed backplot to show 3 or 4 decimal places deping on the 'Setup/Machine/Toolpath Unit' setting.
- Changed 'Insert Spaces' to skip the = and " characters.
- Updated backplot.
- Fixed problem reading/modifying some macros
CIMCO DNC-Max 5.60.07
- Added log message when associated file updated by auto import.
- Fixed problem auto importing associated files when program is locked and locked files are moved offline.
- Fixed problem with
Changes since previous version:
CIMCO Edit 5.60.06
- Improved CNC-Calc dialog layout.
- Fixed problem using backplot on some systems.
Changes since previous version:
CIMCO Edit 5.60.05
- Updated backplot.
CIMCO NC-Base 5.60.05
- Fixed problem restoring / comparing versions from the program log.
Changes since previous version:
CIMCO Edit 5.60.04
- Fixed crash in CNC-Calc.
Changes since previous version:
CIMCO Edit 5.60.03
- Added support for additional Mazatrol formats.
- Changes 'File Save As' to save the original file when viewing Mazatrol files.
- Changed backplot to use the unit (metric or inch) selected in the machine configuration when loading an STL file.
- Fixed problem updating backplot showing radius compenstation when changing tools.
- Fixed problem with some NC files showing only a black screen when the Mazatrol viewer was enabled.
- Fixed problem maximizing editor window in some multi monitor configurations when secondary monitor resolution was higher than primary display resolution.
- Fixed crash when starting editor with all plugins loaded.
- Fixed problem with creating solid model when using drills.
CIMCO DNC-Max 5.60.03
- Added support for additional Mazatrol formats.
- Added support for using the "Restart device when refreshing" option when using the Quatech direct driver.
CIMCO MDC-Max 5.60.03
- Fixed problem exporting some events logs to Excel when a long worksheet title was specified.
- Fixed problem with client hanging while rebuilding monitoring data in some cases.
CIMCO NC-Base 5.60.03
- Added support for adding Mazatrol files opened in the editor to the database.
- Fixed problem adding programs in some cases.
Changes since previous version:
CIMCO Edit 5.60.02
- Improved log update speed for programs with many log entries (>1000).
- Fixed problem maximizing editor window in some multi monitor configurations.
- Fixed crash when comparing 2 Mazatrol files using 'Compare File With File'.
CIMCO DNC-Max 5.60.02
- Added option to set the last program name only after a directory change. Ref: Port/Configure Port/Advanced Setting/ Associated all programs in folder
- Changed FE mode protocol to remeber last program name used with the 'Use last program name' option.
- Fixed crash when exporting the port configuration on some systems.
- Fixed problem with the Heidenhain FE mode protocol not always setting the send/receive directories after adding a new port.
- Fixed problem with setting the 'Use name of last program' option in the Heidenhain FE mode protocol.
- Fixed incorrect log message when associating received sub-programs with an existing program.
CIMCO MDC-Max 5.60.02
- Fixed problem exporting some events logs to Excel.
CIMCO NC-Base 5.60.02
- Changed the modified by, and modified time to include file edits.
- Fixed problem with selection being reset in the program log.
Changes since previous version:
CIMCO Edit 5.60.01
- Added support for viewing M2, M32, M+ and Fusion (M640) Mazatrol files.
- Added option to rember values used in 'Simple Math Functions' Ref: Setup/Editor/Remeber math values
- Added option to automatically insert spaces when opening a file. Ref: Setup/Other Settings/Insert spaces when opening file
- Changed editor to keep toolbar layout when upgrading license.
- Updated backplot converters.
- Fixed incorrect error message when trying to save a file to a read-only drive.
- Fixed problem with disabling radius compensation in the backplot.
- Fixed incorrect text and tool tips for the 'Ignore duplicate info' and 'Ignore 0's' options in the tool list setup.
- Fixed problem printing Mazatrol files when color printing was enabled.
CIMCO DNC-Max 5.60.01
- Added FTP server protocol.
- Added support for specifying the DNC-Max server name using the hostname/computer name.
- Added option to abort the current transfer if a new manual transfer is initiated. Ref: Port/Configure Port/Transmit/Abort if new transfer started
- Added option to specify a fixed DNC-Max server name in the DNC-Max Client. Ref: Setup/Configure Client/Client Configuration/ Fixed DNC-Max server name / address
- Added port group name when exporting port list from the server configuration.
- Added port NC-Base group name when exporting port list from the server configuration.
- Added option to show filenames relative to the NC-Base base directory in the port logs. Ref: Setup/Configure Server/NC-Base/Auto import/ Show filenames relative to base dir.
- Added option to restart device servers when refreshing using 'Refresh Interval'. Ref: Port/Configure Port/Serial Device/Restart device when refreshing
- Added message when directory synchronizer failed to delete a file that is offline.
- Increased maximum number of server directory variables to 64.
- Changed directory monitor protocol to save index files in a subdirectory of the 'Sys' directory.
- Fixed problem with groups collapsing when dragging ports between groups in the DNC-Max client.
- Changed DNC-Max client to use sub-group header styles only when sub-groups were defined.
- Changed NPort Simulator to automatically reload script when updated.
- Fixed problem with the handshake resume delay in the standard COM driver.
- Fixed server crash when debug log active on ports using super booster.
- Fixed problem with temporary files left in the NC-Base import directories. Ref: Setup/Configure Client/Client Configuration/Confirm overwrite file
- Fixed problem with the 'Hide all send/receive functions' not working in the DNC-Max client inside the editor.
- Fixed problem restarting the server after a server dump when running as a service.
- Fixed problem configuring auto receive in the directory monitor protocol when 'Send File' was disabled.
- Fixed problem with server running out of FTP sessions.
- Fixed problem with the auto receive 'Other file prefix lenght' option required that the existing program was the same length as the prefix.
CIMCO NC-Base 5.60.01
- Added option to run NC-Base in a secure mode where clients do not need write access to the NC-Base directory. Ref: Database/Setup/Server Settings/Advanced/Enable NC-Base Secure Mode
- Added option to "global change" NC-Base program format triggers. Ref: Database/Setup/Machines/Program Format/Global Change This Trigger Ref: Database/Setup/Machines/Program Format/Global Change All Triggers
- Added support for sending files from one machine(group) to a different group. Ref: Database/Setup/Machines/Directories/Share with machine(group)
- Added option to show the port name(s) associated with each machine group in the NC-Base Explorer. Ref: Database/Setup/Server Settings/Advanced/ Show port(s) under machine (group)
- Added option to automatically logon to NC-Base using the Windows user name. Ref: Database/Setup/Client Settings/Login using current Windows user name
- Added option to specify the name used for the 'Program' field. Ref: Database/Setup/Database Settings/Text 'Program':
- Added option to make database field all uppercase. Ref: Database/Setup/Database Settings/Uppercase field
- Added option to make database field read-only. Ref: Database/Setup/Database Settings/Field is read-only
- Added option to change the editor to run in 'Minimal NC-Base Client Mode' Ref: Database/Setup/Client Settings/Minimal client mode Ref: Database/Setup/Client Settings/Super minimal client mode
- Added option to expire passwords. Ref: Database/Setup/Server Settings/Expire passwords after days
- Added option to require strong passwords (minimum 7 letters and digits). Ref: Database/Setup/Server Settings/Strong passwords required
- Added option to export the system log. Ref: Database/System Log/Export
- Added support for sending files open in the editor including sending from the selected line.
- Added option to show standard change comments for any log entry type. Ref: Database/Setup/Server Settings/Logging/Log Prompts/Show 'Change Comment'
- Added warning message when deleting associated files that it is not possible to restore the files.
- Added option to prevent operators from sending files on the import queue. Ref: Database/Setup/Server Settings/Advanced/ Do not allow sending files on the import queue
- Added option to revision all editor saves. Ref: Database/Setup/Server Settings/Advanced/Revision all saves
- Added toolbar button to stop the current DNC-Max transfer. Ref: Database/Setup/Client Settings/Show DNC Stop\End Transfer button
- Added options to allow sending files in a continuous loop. Ref: Database/Setup/Client Settings/Allow user to send files looped
- Added support for using Ctrl+C to copy program info.
- Added option to specify a message depending on the program status that is shown to the operator when sending a program from the NC-Base client. Ref: Database/Setup/Server Settings/Logging/Send Prompts
- Added support for specifying users not in the 'Administrators' group that can manage users. Ref: Database/Setup/Server/Other/Users that can manage users and user groups
- Added support for specifying users not in the 'Administrators' group that can manage machines/ports. Ref: Database/Setup/Server/Other/Users that can manage machines and ports
- Added option to control users' access to the NC-Base client configuration. Ref: Database/Setup/Client Settings/Disable database client setup
- Added confirmation dialog when accepting imported programs.
- Added confirmation dialog when sending a file.
- Added system log entry when user logs in or logs out.
- Added system log entry when files copied to an external location.
- Added warning when accepting a file that is older than the current file.
- Added function to set all imported programs to 'Approved'. Ref: Database/Setup/Maintenances/Set all programs to 'Approved'
- Added option to move all associated files offline when a program is locked. Ref: Database/Setup/Machines/Advanced/ Move all associated files offline when locking
- Changed NC-Base explorer window to show the program after using 'Add Program'.
- Changed NC-Base to save last search strings individually for each user.
- Changed NC-Base setup dialogs layout.
- Changed NC-Base directory move to allow imports in the database when moving machine folders inside the base directory,
- Changed NC-Base program listing to default to the 'Documents' folder.
- Changed NC-Base program listing to automatically open exported list.
- Changed all dialogs to show filenames relative to the base directory when 'Show filenames relative to base dir.' is selected.
- Changed 'File Save As' to default to the 'Documents' folder when saving a file from the database.
- Changed 'Copy Program Info' to also copy the program name to the clipboard.
- Changed log view to auto refresh after sending a file.
- Changed search to remember selected program.
- Changed 'Yes To All' / 'No To All' to be shown only when multiple programs / files are selected.
- Changed delete program to move associated files offline also.
- Improved speed of User Group list setup when >100 users are defined.
- Removed disabled features (Customer, Locked, Read-only, ...) from column selection.
- Fixed problem using the 'Accept Imported File As' when running MS SQL.
- Fixed problems with leading/trailing spaces in the program name when adding new programs to NC-Base.
- Fixed incorrect text on "Get Modified Date" and "Get Created Date" on the NC-Base Maintenance page.
- Fixed problem with updating file with program information when trigger was set to use the filename or comment.
- Fixed problem with auto imported associated NC files not moved to the 'Locked' folder when imported program was locked.
- Fixed problem using 'Update File With Program Information' when 'Update file with program info' option was not checked.
- Fixed NC-Base toolbar layout problem when user management was disabled.
- Fixed problem with the NC-Base Logon button when already logged in and 'Logout on close/minimize' was selected.
- Fixed problem moving locked files when moving a single machine directory.
- Fixed problem with the "Get Modified Date" and "Get Created Date" setting the file modified/creation time.
- Fixed problem adding a new program when un-reference file was already in the database ('Error adding program' message).
- Fixed incorrect system log columns when user management was disabled.
- Fixed problem with file purge when only associated was selected.
- Fixed problem with maximum search results message not showing up in the status bar.
- Fixed problem with loosing the DNS driver name after using the server configuration on a PC without a valid ODBC connection defined.
- Fixed problem with the 'Accept Imported File As' when performed by a user without write access to the base directory.
- Fixed problem with the number of search results not always shown in the status bar.
- Fixed problem with the status search showing unused status types.
- Fixed incorrect text and tool tips for the 'Ignore duplicate info' and 'Ignore 0's' options in the NC-Base template tool list setup.
- Fixed problem showing more than 10000 entries in the system log. NC-Base: 5.00.10
CIMCO Software 5.50.64 Released: 27-08-09Changes since previous version:
CIMCO Edit 5.50.64
- Fixed problem when specifying invalid value in the CNC-Calc Letter Milling dialog.
- Fixed CNC-Calc resize problem.
CIMCO DNC-Max 5.50.64
- Fixed problem using some SMS modems.
- Fixed problem extracting comments from some Mazak Fusion binary files.
CIMCO Software 5.50.63 Released: 24-08-09Changes since previous version:
CIMCO Edit 5.50.63
- Fixed CNC-Calc arc problem.
CIMCO Software 5.50.62 Released: 21-08-09Changes since previous version:
CIMCO Edit 5.50.62
- Added support for generating multiple Helix milling or Thread milling holes in one operation in CNC-Calc.
- Added new selection filter to CNC-Calc drilling dialogs.
- Added support for removing address (letter followed by value). Ref: NC Functions/Insert\Remove/Remove Strings : "Remove Address/Letter"
- Added option to prompt for language before viewing Mazatrol files. Ref: Setup/Global/Mazatrol Viewer/Language/Prompt for language
- Changed tool path statistics export function to open untitled file in the editor.
CIMCO DNC-Max 5.50.62
- Added support for reading additional Mazatrol files.
- Added message to port event log when Network I/O modules are online/offline (MONONLINE/MONOFFLINE).
- Fixed problem extracting comments from some Mazak Fusion binary files.
CIMCO Software 5.50.61 Released: 19-08-09Changes since previous version:
CIMCO DNC-Max 5.50.61
- Added option to specify additional $SENDROOT/$RECVROOT directories in the Mazak and Heidenhain FE mode protocols. Ref: Port/Configure Port/Directories/Additional Directories
- Fixed problem reading some Mazak Fusion file comments in the directory monitor protocol.
- Fixed problem sending the same local file multiple times.
CIMCO Software 5.50.60 Released: 18-08-09Changes since previous version:
CIMCO Edit 5.50.60
- Added Roeders back plot converter.
- Fixed problem showing reverse contours in CNC-Calc.
CIMCO DNC-Max 5.50.60
- Added option store Heidenhain FE mode tool data etc. using the name of the last program. If NC-Base is used tool data etc. are associated with the last program. Ref: Port/Configure Port/File Types/Use last program name
CIMCO Software 5.50.59 Released: 17-08-09Changes since previous version:
CIMCO Edit 5.50.59
- Fixed problem with CNC-Calc Fanuc drilling cycles.
CIMCO Software 5.50.58 Released: 14-08-09Changes since previous version:
CIMCO Edit 5.50.58
- Fixed CNC-Calc error message for "Lead in/out" in contour milling so it is possible to create "No Compensation" tool paths without lead in/out.
- Fixed problem in CNC-Calc with exporting linearized milling contour arcs.
CIMCO Software 5.50.57 Released: 14-08-09Changes since previous version:
CIMCO Edit 5.50.57
- Added support for generating tool lists. Ref: NC Functions/Make Tool list
- Fixed problem with CNC-Calc Fanuc drilling cycles.
CIMCO Software 5.50.56 Released: 12-08-09Changes since previous version:
CIMCO Edit 5.50.56
- Fixed problem with CNC-Calc lathe finishing.
CIMCO Software 5.50.55 Released: 11-08-09Changes since previous version:
CIMCO Edit 5.50.55
- Updated Mazatrol viewer.
CIMCO MDC-Max 5.50.55
- Added support for selecting job/program for tables/graphs/event logs. Ref: Setup/System Setup/Table\Graphs\Logs/Job/Select Job(s) Ref: Setup/System Setup/Table\Graphs\Logs/Programs/Select Programs(s)
- Fixed problem using previous job name in some cases.
CIMCO Software 5.50.54 Released: 06-08-09Changes since previous version:
CIMCO Edit 5.50.54
- Updated back plot.
CIMCO Software 5.50.53 Released: 05-08-09Changes since previous version:
CIMCO Edit 5.50.53
- Updated Mazatrol viewer.
CIMCO DNC-Max 5.50.53
- Added option to increase Okuma B protocol buffer size.
CIMCO Software 5.50.52 Released: 05-08-09Changes since previous version:
CIMCO Edit 5.50.52
- Improved CNC-Calc information bar layout.
CIMCO Software 5.50.51 Released: 05-08-09Changes since previous version:
CIMCO Edit 5.50.51
- Improved CNC-Calc toolbar layout.
CIMCO NC-Base 5.50.51
- Added option to mark auto imported files as sub programs. Ref: Setup/Configure Server/NC-Base/Auto import/Sub Prgs.
CIMCO Software 5.50.50 Released: 25-07-09Changes since previous version:
CIMCO Edit 5.50.50
- Fixed CNC-Calc crash when opening multiple drawings.
CIMCO DNC-Max 5.50.50
- Increased maximum length of group + sub-group names to 250.
- Fixed client crash in some cases when restarting server. (Introduced in 5.50.49).
CIMCO Software 5.50.49 Released: 24-07-09Changes since previous version:
CIMCO Edit 5.50.49
- Added support for exporting back plot to a DXF file. Ref: Back plot/Export as DXF File
- Fixed problem with CNC-Calc machine zero in lathe mode.
CIMCO DNC-Max 5.50.49
- Added support for machine sub-groups in the client port list.
CIMCO Software 5.50.48 Released: 21-07-09Changes since previous version:
CIMCO DNC-Max 5.50.48
- Fixed problem with missing CSV file when program deleted from NC-Base.
CIMCO Software 5.50.47 Released: 16-07-09Changes since previous version:
CIMCO Edit 5.50.47
- Added axis substitution in CNC-Calc.
CIMCO Software 5.50.46 Released: 14-07-09Changes since previous version:
CIMCO Edit 5.50.46
- Fixed CNC-Calc ISO NC code peck drilling problem.
CIMCO DNC-Max 5.50.46
- Improved directory monitor performance when on or more network directories are off-line.
- Fixed problem synchronizing files updated while destination directory was off-line.
CIMCO Software 5.50.45 Released: 07-07-09Changes since previous version:
CIMCO Edit 5.50.45
- Updated back plot converters.
- Fixed problem viewing some Mazatrol files.
CIMCO DNC-Max 5.50.45
- Added support for Moxa I4000 / M-1800 8-Port expansion I/O module.
CIMCO NC-Base 5.50.45
- Fixed crash in system log when log contained very long comments.
CIMCO Software 5.50.44 Released: 01-07-09Changes since previous version:
CIMCO Edit 5.50.44
- Fixed problem with CNC-Calc feedrates when creating multiple pocket operations.
- Fixed problem with multiple editor processes shown in the task list.
CIMCO DNC-Max 5.50.44
- Fixed problem with the DNCMaxCtrl.exe application not working. (Introduced in 5.50.35).
CIMCO MDC-Max 5.50.44
- Fixed problem with week numbers starting a 0 in some cases.
CIMCO Software 5.50.43 Released: 29-06-09Changes since previous version:
CIMCO Edit 5.50.43
- The points selected in CNC-Calc arc through 2 point, arc through 3 points, circle through 2 points and circle through 3 points, are now shown on the drawing.
- The character '&' has been added to the simple CNC-Calc character set.
- Updated back plot converters.
CIMCO MDC-Max 5.50.43
- Fixed problem with DBVAR1-DBVAR4 not being cleared when unknown program set.
CIMCO Software 5.50.42 Released: 18-06-09Changes since previous version:
CIMCO Edit 5.50.42
- Updated Mazatrol viewer.
- Updated back plot converters.
CIMCO DNC-Max 5.50.42
- Fixed problem with Fagor 8040/8050/8055(T) protocol sometimes not finding a file when using program numbers as filename. (Introduced in 5.50.13).
CIMCO Software 5.50.41 Released: 09-06-09Changes since previous version:
CIMCO Edit 5.50.41
- Updated back plot converters.
CIMCO DNC-Max 5.50.41
- Reduced port restart time when using the Moxa Direct driver.
CIMCO NC-Base 5.50.41
- Removed login dialog when opening file from Windows Explorer and "Remember Password" is active.
Changes since previous version:
CIMCO Edit 5.50.40
- Added Thread Milling to CNC-Calc,
- Updated CNC-Calc lead In/out for Helix Milling.
- Updated back plot converters.
Changes since previous version:
CIMCO Edit 5.50.39
- MDC-Max update.
CIMCO MDC-Max 5.50.39
- Fixed problem using the "Print Selection" option when printing tables/logs.
Changes since previous version:
CIMCO Edit 5.50.38
- Changed CNC-Calc default output from Gx to G0x for G00-G03.
CIMCO MDC-Max 5.50.38
- Fixed problem showing reports in some cases.
Changes since previous version:
CIMCO Edit 5.50.37
- Added option to always insert text in upper case / all caps. Ref: Setup/Editor/Always UPPER CASE
- Updated Remote Support client.
- Updated samples and macros.
- Fixed problem with missing G40/G41/G42 codes in CNC-Calc ISO lathe code.
CIMCO DNC-Max 5.50.37
- Updated Remote Support client.
CIMCO NC-Base 5.50.37
- Fixed problem with the NC-Base converter utility when filenames was specified relative to the program directory.
Changes since previous version:
CIMCO DNC-Max 5.50.36
- Added error message when file sync. failed in the directory monitor protocol.
- Added support for skipping new files when using the directory cleaner.
CIMCO NC-Base 5.50.36
- Fixed problem searching when search fields contained only spaces.
Changes since previous version:
CIMCO Edit 5.50.35
- Fixed problem with Heidenhain helix arc moves in CNC-Calc.
CIMCO NC-Base 5.50.35
- Added support for sending files to multiple machines from NC-Base.
Changes since previous version:
CIMCO NC-Base 5.50.34
- Changed 'Modify Program' to allow renamed imports to overwrite existing programs.
Changes since previous version:
CIMCO Edit 5.50.33
- Updated Mazatrol viewer.
- Fixed crash when starting editor and .mac file contained invalid macro definitions.
CIMCO DNC-Max 5.50.33
- Fixed problem sending local files looped.
- Fixed problem maximizing DNC-Max Client when using high screen resolutions.
Changes since previous version:
CIMCO Edit 5.50.32
- Changed file compare to ignore block numbers that are specified using the alternate block number character.
CIMCO MDC-Max 5.50.32
- Fixed problem with event logs showing data from midnight and not TIME[DAYSTART] in some cases.
Changes since previous version:
CIMCO Edit 5.50.31
- Added new Fanuc Lathe converter to the back plot.
CIMCO NC-Base 5.50.31
- Fixed problem with the database merge utility.
Changes since previous version:
CIMCO Edit 5.50.30
- Updated CNC-Calc.
Changes since previous version:
CIMCO NC-Base 5.50.29
- Added utility to merge 2 databases.
Changes since previous version:
CIMCO CNC-Calc 5.50.28
- Helix operation have been corrected, so the arc movements now adhere to the set max sweep angle.
- Helix operations can now be made from top to bottom and bottom to top.
- In the helix operation the full circle at the final depth is now optional.
Changes since previous version:
CIMCO Edit 5.50.27
- Added option to start renumbering from a specific line. Ref: Setup/Block Numbers/Start from line
- Added option to skip a number of lines when renumbering. Ref: Setup/Block Numbers/Skip
Changes since previous version:
CIMCO MDC-Max 5.50.26
- Fixed problem with TIMERLAST[] not always set correctly.
Changes since previous version:
CIMCO DNC-Max 5.50.25
- Added option to run directory cleaner on 2 directories Ref: Port/Configure Port/Directory Synchronizer/Second directory to clean
CIMCO MDC-Max 5.50.25
- Improved sort order on table/graphs.
CIMCO NC-Base 5.50.25
- Changed behavior so users without edit permissions cannot edit files on the import queue.
Changes since previous version:
CIMCO Edit 5.50.24
- Updated CNC-Calc.
- Updated back plot converters.
CIMCO MDC-Max 5.50.24
- Fixed problem with TIMERFIRSTSTART[], TIMERFIRSTEND[], TIMERLASTSTART[], TIMERLASTEND[], TIMERPREVSTART[], TIMERPREVEND[] not set.
CIMCO NC-Base 5.50.24
- Added support for pasting program info to multiple programs.
- Renamed CIMCO NC-Base Server to CIMCO Database Server.
Changes since previous version:
CIMCO MDC-Max 5.50.23
- Added option to set the job/program/operator after evaluating an event. Ref: Setup/System Setup/Table\Graphs\Logs/Log Events/ Set Job/Program/Operator after this event
Changes since previous version:
CIMCO Edit 5.50.22
- Fixed problem showing the back plot on some systems.
CIMCO NC-Base 5.50.22
- Fixed problem disabling two line comments for generated tool lists.
Changes since previous version:
CIMCO DNC-Max 5.50.21
- Fixed crash in NC-Base Backup Server.
Changes since previous version:
CIMCO Edit 5.50.20
- Added T2 support in the Mazatrol viewer.
- Added support for loading STL files in the back plot. Ref: Back plot/Load STL File
- Fixed color problem when reloading a Mazatrol file.
- Fixed problem with NC-Assistant visible after closing back plot.
CIMCO MDC-Max 5.50.20
- Added support for changing column order.
- Fixed problem generating weekly reports for the current week.
Changes since previous version:
CIMCO Edit 5.50.19
- Improved NC-Assistant input dialog layout.
CIMCO DNC-Max 5.50.19
- Added option to ping device before connecting using one of the Direct TCP/IP drivers (was previously always enabled). Ref: Setup/Configure Port/Serial Device/Ping before connecting
- Fixed problem with the FTP server when client specified absolute path in some cases.
CIMCO MDC-Max 5.50.19
- Fixed problem with event log setup now visible.
- Fixed problem setting sort order for event logs.
- Fixed problem with TEXTPREV[JOB] and TEXTPREV[PROGRAM].
Changes since previous version:
CIMCO Edit 5.50.18
- Increased number of NC-Assistant variables to 60.
- Fixed problem creating a new file when using NC-Base. (introduced in 5.50.17)
- Fixed problem with NC-Assistant hidden after closing back plot.
CIMCO DNC-Max 5.50.18
- Added option to set the file date/time on synchronized files in the directory monitor protocol. Ref: Port/Configure Port/Directory Synchronizer/Set synced file timestamp
Changes since previous version:
CIMCO Edit 5.50.17
- Fixed problem with NC-Base not updating the revision when manually editing a file and only inserting or removing blank lines.
- Fixed problem with NC-Base not updating the revision when opening files outside NC-Base.
CIMCO MDC-Max 5.50.17
- Added support for creating event logs. Ref: Setup/System Setup/Table\Graphs\Logs/General/Type/Log Ref: Setup/System Setup/Table\Graphs\Logs/Log Events
- Added TIMERPREVSTART[] and TIMERPREVEND[].
- Added CHANGED[OPERATOR] / CHANGED[PROGRAM] / CHANGED[JOB]
- Added TIMERSTARTED[] / TIMERSTOPPED[]
- Added COUNTERCOUNTED[]
- Added option to suspend timers outside shifts Ref: Setup/System Setup/Timers/Suspend when outside shifts
- Added option to suspend timers during breaks Ref: Setup/System Setup/Timers/Suspend during breaks
- Added option to enable/disable data pre-processing Ref: Setup/System Setup/Client Settings/ Pre-process data to get accurate historical information
- Fixed problem generating/printing compact tables when maximum number of machines/programs/jobs/operators per page was specified.
- Fixed problem printing long tables.
Changes since previous version:
CIMCO Edit 5.50.16
- Updated Mazatrol viewer to support binary Mazatrol files.
Changes since previous version:
CIMCO Edit 5.50.15
- Updated back plot converters.
CIMCO DNC-Max 5.50.15
- Added option to run directory cleaner before a directory monitor sync. operation. Ref: Port/Configure Port/Directory Synchronizer/Run 'Cleaner' before sync
CIMCO NC-Base 5.50.15
- Fixed problem when attempting to downgrade the database version.
Changes since previous version:
CIMCO Edit 5.50.14
- Updated Mazatrol viewer.
CIMCO DNC-Max 5.50.14
- Fixed problem using directory synchronizer on some UNC paths.
Changes since previous version:
CIMCO Edit 5.50.13
- Added new Siemens back plot converter.
CIMCO DNC-Max 5.50.13
- Added option to the Fagor 8040/8050/8055(T) protocol to save program comment on first line. Ref: Port/Configure Port/Transmit/Save comment in file
- Added option to the Fagor 8040/8050/8055(T) protocol to show comment in directory listing when files saved with program number. Ref: Port/Configure Port/Transmit/Show comment in directory list
- Fixed problem with Fagor 8040/8050/8055(T) protocol sometimes sending the wrong file when using program numbers as filename.
CIMCO NC-Base 5.50.13
- Fixed problem specifying a new base directory when restoring an NC-Base backup.
- Fixed problem restoring NC-Base backups when one or more files could not be restored.
Changes since previous version:
CIMCO Edit 5.50.12
- Added option to select Mazatrol viewer language. Ref: Setup/Global/Mazatrol Viewer/Language
- Added option to show Mazatrol TPC data. Ref: Setup/Global/Mazatrol Viewer/Show TPC data.
CIMCO DNC-Max 5.50.12
- Fixed problem sending small files (>120 bytes) in some cases when using the direct drivers.
CIMCO NC-Base 5.50.12
- Added support for specifying a new base directory when restoring an NC-Base backup.
- Added option to specify a template file when adding a new program. Ref: Database/Setup/Machines/Templates/Program Template
- Added option to use two line comments for generated tool lists. Ref: Database/Setup/Machines/Templates/Two line comments
- Added option to run NC-Base in 'CAM-Base mode' Ref: Database/Setup/Server Settings/CAM-Base/Enable CAM-Base mode
- Updated NC-Base tool list generator.
- Fixed problem selecting NC-Base file type when adding a new program and only one machine group was defined.
- Fixed problem backing up template files using the NC-Base Backup Server. NC-Base: 5.00.09
Changes since previous version:
CIMCO Edit 5.50.11
- Updated back plot.
- Updated Mazatrol viewer.
CIMCO NC-Base 5.50.11
- Added option to send an e-mail when attempting to auto import a program that is read-only Ref: Setup/Configure Server/NC-Base/Auto import/ Send E-mail if import fails
Changes since previous version:
CIMCO Edit 5.50.10
- Updated Mazatrol viewer.
- Fixed problem with rotating letters in CNC-Calc.
CIMCO DNC-Max 5.50.10
- Added option to not apply transmit translators to reports. Ref: Port/Configure Port/Transmit/No translators on reports
- Changed auto receive compare reports to compare against original file when 'Save in $INCOMING' is selected but no file is in the $INCOMING directory.
- Fixed problem sending associated files from NC-Base when main program contained '.'
Changes since previous version:
CIMCO Edit 5.50.09
- Updated Heidenhain/ISO converter.
- Fixed zoom problem when importing DXF files.
- Fixed G17/18/19 rotate/mirror problem.
CIMCO DNC-Max 5.50.09
- Fixed problem naming auto received associated files when adding those to NC-Base and 'Rename using main program name' was not selected.
Changes since previous version:
CIMCO Edit 5.50.08
- Added support for selecting layers when importing DXF files.
- Added additional sample programs.
- Updated Mazatrol viewer.
CIMCO NC-Base 5.50.08
- Added option to lock programs when status set to 'Check Failed'. Ref: Database/Setup/Server Settings/Logging/ Set Locked when 'Check Failed'
- Added option to set programs read/write when status set to 'Check Failed'. Ref: Database/Setup/Server Settings/Logging/ Read/Write when 'Check Failed'
- Added option to disable the transfer limit counter when status set to 'Checked'. Ref: Database/Setup/Server Settings/Logging/ Disable Transfer Count on 'Checked'.
- Added option to disable 'Updating', 'Running In', 'Ready' and 'Approval Failed' status states. Ref: Database/Setup/Server Settings/Logging/Disable 'Approval Failed' Ref: Database/Setup/Server Settings/Logging/Disable 'Updating' Ref: Database/Setup/Server Settings/Logging/Disable 'Running In' Ref: Database/Setup/Server Settings/Logging/Disable 'Ready'
Changes since previous version:
CIMCO Edit 5.50.07
- Modified macro setup dialog to insert new macros at current position in the list.
CIMCO DNC-Max 5.50.07
- Added option to confirm file overwrite when manually receiving an existing file. Ref: Setup/Configure Client/Client Configuration/Confirm overwrite file
CIMCO NC-Base 5.50.07
- Added option to include user name in print headers. Ref: Database/Setup/Server Settings/Printing/User Name
Changes since previous version:
CIMCO Edit 5.50.06
- Fixed problem with 'String not found' message not always shown on top of Editor.
CIMCO MDC-Max 5.50.06
- Added option to send messages from the operator screen that depends on the scanned barcode. Ref: Setup/System Setup/Operator Screens/When input start matches
CIMCO NC-Base 5.50.06
- Fixed problem with some files being read-only when opened from NC-Base.
- Fixed problem adding a program to NC-Base when the program directory did not exist.
Changes since previous version:
CIMCO Edit 5.50.05
- Added option to specify number of decimals used in the Mazatrol Viewer. Ref: Setup/Global Setup/Mazatrol Viewer Decimals
- Added option to specify back plot lathe coordinate system orientation. Ref: Setup/Machine Type/Back plot/Orientation
- Updated Mazatrol Viewer.
CIMCO DNC-Max 5.50.05
- Changed directory synchronizer to not log synchronization errors during rescans. An informational message is still logged.
- Changed NC-Base to log username when sending a file from the NC-Base client.
- Fixed problem with the option to send an e-mail when one or more required fields are missing in an auto imported program.
- Fixed hang starting the debug log when server is running Vista or Server 2008.
CIMCO Software 5.50.04 Released: 19-01-09Changes since previous version:
CIMCO Edit 5.50.04
- Fixed crash in Mazatrol Viewer.
CIMCO DNC-Max 5.50.04
- Added option to delete files during re-scanning in the directory monitor protocol. Ref: Port/Configure Port/Directory Synchronizer/ Delete files during re-scan
Changes since previous version:
CIMCO Edit 5.50.03
- Updated Mazatrol Viewer.
- Added option to disable Mazatrol Viewer when using a license server.
- Reset Demo period.
- Fixed license server installation problem.
CIMCO DNC-Max 5.50.03
- Reset Demo period.
- Fixed license server installation problem.
Changes since previous version:
CIMCO Edit 5.50.02
- Updated Mazatrol Viewer.
- Updated back plot.
Changes since previous version:
CIMCO Edit 5.50.01
- Initial 5.5 release.
CIMCO DNC-Max 5.50.01
- Initial 5.5 release.
CIMCO Software 5.12.32 Released: 09-01-09Changes since previous version:
Changes since previous version:
CIMCO DNC-Max 5.12.31
- Added support for automatic restart of Quatech devices when using Quatech Direct TCP.
- Added additional information to the System.log to help located server start problems.
- Added support for using multiple synchronize sets for the same file.
Changes since previous version:
CIMCO Edit 5.12.30
- Updated sample files.
CIMCO NC-Base 5.12.30
- Added option to send an e-mail when one or more required fields are missing in an auto imported program. Ref: Setup/Configure Server/NC-Base/E-Mail missing field info to Ref: Setup/Configure Server/NC-Base/Auto import/ Email if required field(s) missing
Changes since previous version:
CIMCO Edit 5.12.29
- Added link to download the latest version of the Editor. Ref: Help/Download Latest Version Ref: Setup/Global/Hide 'Download Latest Version'
CIMCO DNC-Max 5.12.29
- Added option to specify additional $SENDROOT/$RECVROOT directories. Ref: Port/Configure Port/Directories/Additional Directories
CIMCO NC-Base 5.12.29
- Added 'SyncDir.log' log file when using the directory sync function.
- Added NC-Base V3 to V5 converter (NCBaseV3toV5.exe).
- Fixed problem auto importing locked files when using the 'Set Locked Offline' option.
Changes since previous version:
CIMCO Edit 5.12.28
- Fixed macro calculation problem when a macro was just added/changed.
CIMCO DNC-Max 5.12.28
- Fixed problem renaming associated files when send from NC-Base to a directory monitor port.
Changes since previous version:
CIMCO Edit 5.12.27
- Added option to enable/disable 'wrapping' searches. Ref: Setup/Editor/Wrap Searches
- Fixed problem using 'Save As' to add new programs to the database that caused file to be truncated to 1024 lines in some cases.
CIMCO DNC-Max 5.12.27
- Fixed problem synchronizing files with extension that were not specified in the 'Extension' field when using the synchronize function in the directory monitor protocol.
CIMCO NC-Base 5.12.27
- Changed NC-Base server to automatically enable the database server in the Window firewall.
Changes since previous version:
CIMCO DNC-Max 5.12.26
- Added command line option to prevent operators from closing the DNC-Max Client. (DNCAdmin5.exe /noclose).
- Fixed problem importing files to NC-Base in some cases. (Introduced in 5.12.25).
Changes since previous version:
CIMCO Edit 5.12.25
- Added '%U' option to print username in header/footers.
- Added option to move locked files offline. Ref: Database/Setup/Machines/Advanced/Move Locked files offline
CIMCO MDC-Max 5.12.25
- Fixed problem generating table/graphs for individual shift when selecting a start day where the shift was not defined.
CIMCO NC-Base 5.12.25
- Added option to move locked files offline. Ref: Database/Setup/Machines/Advanced/Move Locked files offline
Changes since previous version:
CIMCO DNC-Max 5.12.24
- Added option to execute external program on auto received files. Ref: Port/Configure Port/Auto Receive/Set/Execute
- Added touch screen keyboard to file and directory dialogs when running client in minimal mode (DNCAdmin5.exe /minimal).
- Added command line option to start the DNC-Max client with only the Terminal tab visible: DNCAdmin5.exe /termonly
Changes since previous version:
CIMCO Edit 5.12.23
- Added CNC-Calc '+Z Programming' option to generate code for sliding-head lathes.
- Fixed problem synchronizing NC-Base associated files when using the Synchronize folder functions.
- Fixed problem saving the CNC-Calc '-X Programming' option.
- Fixed problem with the 'Hide' button on the DNC send/receive status dialogs.
CIMCO DNC-Max 5.12.23
- Fixed problem synchronizing NC-Base associated files when using the Synchronize folder functions.
Changes since previous version:
CIMCO Edit 5.12.22
- Fixed problem selecting a new NC-Base machine group directory if files should not be moved.
- Changed send/receive dialogs to stop transfer when selecting Cancel.
CIMCO DNC-Max 5.12.22
- Added option to delete directory/directory structure in the directory monitor protocol. Ref: Setup/Configure Port/Advanced/Directory Cleaner
- Added option to receive one transfer into the manually selected file, subsequent transfer will be auto received until a new manual send/receive is performed. Ref: Setup/Configure Port/Mazatrol Transfer/Advanced/ Receive into selected file only once
- Changed file and directory dialogs to expand/open when running the client in minimal mode (DNCAdmin5.exe /minimal).
Changes since previous version:
CIMCO Edit 5.12.21
- MDC-Max update.
CIMCO MDC-Max 5.12.21
- Fixed problem with duplicate last date in some cases.
Changes since previous version:
CIMCO Edit 5.12.20
- Added support for adding and empty ISO or Mazatrol when adding a new program to NC-Base.
- Fixed back plot arc problem.
CIMCO DNC-Max 5.12.20
- Added support for adding and empty ISO or Mazatrol when adding a new program to NC-Base.
- Added support for reading eNet Mazatrol Files.
- Added option to check for required fields when auto importing files- Ref: Setup/Configure Server/NC-Base/Auto Import/Check 'Required Fields'
- Updated Moxa IO library.
- Fixed problem using multi line barcodes when barcode reader used \CR\LF.
Changes since previous version:
CIMCO DNC-Max 5.12.19
- Added option to support scanning barcodes without a fixed trigger string using 3 barcodes. Ref: Setup/Configure Server/Events / Message/Extract Value/ Next two lines if received within 3/10/60s
Changes since previous version:
CIMCO Edit 5.12.18
- Added function to synchronize contents of NC-Base machine folders.
- Added support for exporting holes from CNC-Calc drilling cycles.
- Added option to hide formula results for individual macros.
- Improved NC-Base move base directory / move folder functions.
- Changed behavior to set focus to unsaved window when using 'Close All'
- Fixed problem with the macro functions acos() and asin().
CIMCO DNC-Max 5.12.18
- Added function to synchronize contents of NC-Base machine folders.
- Improved NC-Base move base directory / move folder functions.
Changes since previous version:
CIMCO Edit 5.12.17
- Fixed problem with the macro functions acos(), asin() and atan().
- Fixed problem saving the "Hide NC-Assistant formula" setting.
CIMCO DNC-Max 5.12.17
- Added support for sending data compressed in the Phoenix Link protocol.
Changes since previous version:
CIMCO DNC-Max 5.12.16
- Added Phoenix Link protocol used by some plasma/laser cutter machines.
- Improved ESAB plasma cutter protocol transfer speed.
Changes since previous version:
CIMCO Edit 5.12.15
- Added option to allow only administrators access to the NC-Base system log. Ref: Database/Setup/Server/Other/System log only visible to administrators
- Added NC-Base user group permission to determine if the user is allowed to edit File Notes. Ref: Database/Setup/User Groups/Edit File Notes
CIMCO DNC-Max 5.12.15
- Added option to delete only known extensions in the directory monitor protocol when deleting files from the Send Directory. Ref: Port/Configure Port/Delete 'Extensions' only
- Fixed problem using T2 comments with messaging.
- Fixed problem changing directory in the Fagor 8055T protocol.
Changes since previous version:
CIMCO Edit 5.12.14
- Fixed macro calculation error when specifying an input value starting with .
Changes since previous version:
CIMCO Edit 5.12.13
- Added option to send files store with non-standard linefeed characters like 13,10,10 etc. Ref: 'Send files with non-standard CR/LF'
- Added option to hide NC-Assistant formula results. Ref: Setup/Global/Hide NC-Assistant formula results
- Added support for using the 'As Specified' for the number of decimals used when outputting formula results.
- Updated CNC-Calc.
- Fixed problem with locked status being exported wrong when exporting NC-Base program list.
- Fixed problem opening .DXF files in CNC-Calc from Windows Explorer.
- Fixed problem when restoring old backups without program information and the 'Backup program information' option was enabled.
- Fixed problem with the macro parameter 'Digits' when 'As Specified' what selected for the number of decimals.
CIMCO DNC-Max 5.12.13
- Added option to ping regular serial ports before connecting to reduce TCP/IP connection load. Ref: Setup/Configure Port/Serial Device/Ping before connecting
- Added option to limit the connection load when using regular serial ports by checking the servers 'Max TCP/IP connections per second' setting before opening a COM port. Ref: Setup/Configure Port/Serial Device/Limit connection load
- Added 'Keep existing fields' option to the NC-Base converter.
Changes since previous version:
CIMCO Edit 5.12.12
- Fixed problem updating file after updating program info when adding a new program to NC-Base.
- Fixed incorrect NC-Base 'Programs Must be Checked' message.
CIMCO DNC-Max 5.12.12
- Update ESAB protocols.
- Fixed problem remote requesting files in the directory monitor protocol. (Introduced in 5.11.05).
Changes since previous version:
CIMCO DNC-Max 5.12.11
- Added option to specify minimum file name length in the Heidenhain FE mode protocol. Ref: Port/Configure Port/File Types/Minimum filename length
Changes since previous version:
CIMCO Edit 5.12.10
- Fixed problem selecting a directory in the directory browser dialog.
CIMCO DNC-Max 5.12.10
- Added option to specify the number of times as translator should be applied. Ref: Translate/Count
- Added support for using alphanumeric program names in the Esab/Messer/.. plasma cutter protocols.
- Fixed problem selecting a directory in the directory browser dialog.
Changes since previous version:
CIMCO DNC-Max 5.12.09
- Added option to enable/disable compact header when generating compact tables. Ref: Setup/System Setup/Table\Graphs/General/Compact headers
Changes since previous version:
CIMCO DNC-Max 5.12.08
- Updated NC-Base transfer limit function.
Changes since previous version:
CIMCO DNC-Max 5.12.07
- Added support for automatically sending NC-Base associated files.
- Added option to manually select the receive directory for auto-received files. Ref: Port/Configure Port/Auto Receive/Set/Filename/ Use manual receive directory
- Added option to specify how to handle long file names in the Heidenhain FE mode protocol. Ref: Port/Configure Port/General Options/Max directory filename length
- Added option to save files based on a trigger in the Heidenhain FE mode protocol. Ref: Port/Configure Port/Advanced Settings/Filename trigger.
Changes since previous version:
CIMCO DNC-Max 5.12.06
- Added option to specify trigger used for finding the first comment shown on Handheld Terminals. Ref: Port/Configure Port/Transmit/Skip Data/Handheld Terminal
- Added option map '+' to '-' on handheld terminals. Ref: Port/Handheld Terminals/Setup/Map '+' to '_'
- Fixed problem using the 'Refresh port' option when using Direct TCP connections.
Changes since previous version:
CIMCO Edit 5.12.05
- Updated Mazak Mazatrol viewer.
CIMCO DNC-Max 5.12.05
- Added option to send/receive associated files in the directory monitor protocol. Ref: Port/Configure Port/Auto Receive/Set/Associate File Ref: Port/Configure Port/Remote Request/Set/Multi Request/Associated File
- Fixed problem with files in the directory monitor auto receive directory being added to the database without being moved.
- Fixed problem with the 'Do not export received file NC-Base' option in the directory monitor protocol.
CIMCO MDC-Max 5.12.05
- Fixed problem with clients not being able to connect or loosing the connection after some time.
CIMCO NC-Base 5.12.05
- Added support for sending associated files marked as 'NC Data' automatically when sending NC-Base program files.
Changes since previous version:
CIMCO DNC-Max 5.12.04
- Added support for sending from block numbers like N10.20 using the advanced send functions.
CIMCO MDC-Max 5.12.04
- Added additional MDC information to Sys\System.log.
- Fixed high CPU utilization problem when failing to create MDC Client connections.
Changes since previous version:
CIMCO DNC-Max 5.12.03
- Added support for 'Send Local Files Advanced'.
CIMCO MDC-Max 5.12.03
- Fixed potential crash if database contained delete ports.
Changes since previous version:
CIMCO DNC-Max 5.12.02
- Added support for using $FILENAME and $FILENAMENOEXT variables with the directory monitor protocols 'Rename to' option.
- Added option to keep the directory structure in the network monitor protocol when remote requesting a directory. Ref: Port/Configure Port/Remote Request/Set/Multi Request/ Keep directory structure
CIMCO MDC-Max 5.12.02
- Fixed potential crash if database contained delete ports.
Changes since previous version:
CIMCO Edit 5.12.01
- Updated CNC-Calc.
CIMCO DNC-Max 5.12.01
- Changed pin monitor minimum cycle time from seconds to ms.
CIMCO MDC-Max 5.12.01
- Fixed problem with duplicate ports shown on live/operator screens.
- Fixed problem with skipping messages in some cases when more than 100 messages were logged per second.
Changes since previous version:
CIMCO Edit 5.11.99
- Updated back plot.
CIMCO DNC-Max 5.11.99
- Fixed problem disabling scanning of auto receive / remote request directories in the directory monitor protocol.
CIMCO NC-Base 5.11.99
- Added error message when trying to send a program from the NC-Base client that had reached its transfer limit.
Changes since previous version:
CIMCO Edit 5.11.98
- Fixed crash when starting editor if an invalid macro was defined.
- Fixed problem defining macros that used input parameters in formulas only.
CIMCO DNC-Max 5.11.98
- Updated EIA-2 character mapping.
CIMCO NC-Base 5.11.98
- Added support for auto importing associated files without importing the main program when using the 'Other file prefix lenght' option.
- Added option to prevent operators with permissions to unlock programs from sending a locked program without unlocking it first. Ref: Database/Setup/Server Settings/Advanced/Never send 'Locked' files
- Added separate log messages when auto import file is identical to the existing file.
- Added log messages when auto importing an updated version of associated files of type 'Other'
- Fixed problem updating MS SQL tables to ver. 5.00.08
- Fixed version problem on memo/setup/tool files when auto importing and existing file.
Changes since previous version:
CIMCO Edit 5.11.97
- Updated Back plot view buttons for G18/G19 views.
CIMCO MDC-Max 5.11.97
- Added progress information on live screens and operator screens when server is re-building/calculating data.
- Fixed problem using & in port names on live screens.
- Fixed possible server crash when using an invalid Excel variable configuration. NC-Base: 5.00.08
CIMCO NC-Base 5.11.97
- Added support for matching filename suffix when auto importing associated files.
- Added auto import option to match the first N characters of associated files. Ref: Setup/Configure Server/NC-Base/Auto import/Other files prefix length
- Added option specify the default Transfer Limit Count. Ref: Database/Setup/Server Settings/Advanced/Default Transfer Limit Count
- Added option to restore program fields when restoring a program. Ref: Database/Setup/Server Settings/Advanced/Backup program information
Changes since previous version:
CIMCO DNC-Max 5.11.96
- Added EIA-2 option to the standard protocol Port Mode setting.
Changes since previous version:
CIMCO Edit 5.11.95
- Fixed incorrect help text for info variables on the macro setup page.
- Fixed automatic language selecting problem in the NC-Base server.
- Fixed problem opening some large associated files from NC-Base.
CIMCO DNC-Max 5.11.95
- Fixed automatic language selecting problem in the NC-Base server.
Changes since previous version:
CIMCO Edit 5.11.94
- Added 'Add Function' and 'Add User Input' buttons to the macro setup dialog.
- Fixed OEM installation problem.
CIMCO DNC-Max 5.11.94
- Fixed problem specifying a root directory for job files.
- Fixed problem updating information in client port list after performing a global change of COM port or IP address.
- Fixed problem restoring HHT configurations.
Changes since previous version:
CIMCO Edit 5.11.93
- Updated CNC-Calc.
- Updated NC-Base tool list.
- Added constant 'PI' to NC-Assistant formulas.
CIMCO DNC-Max 5.11.93
- Added support for using the serial device refresh option with Direct drivers.
CIMCO MDC-Max 5.11.93
- Added support for reading EXCELVAR[] using the port name in the Excel Spreadsheet column header. Ref: Setup/System Setup/Excel Variables
Changes since previous version:
CIMCO Edit 5.11.92
- Added support for formulas in the NC-Assistant.
- Updated CNC-Calc.
CIMCO NC-Base 5.11.92
- Fixed problem using \SPC in NC-Base tool list trigger.
Changes since previous version:
CIMCO Edit 5.11.91
- Updated CNC-Calc.
CIMCO DNC-Max 5.11.91
- Fixed problem with the Okuma template not working with some controls.
Changes since previous version:
CIMCO DNC-Max 5.11.90
- Fixed crash in the OSAI 8600 protocol when using a Direct Link.
Changes since previous version:
CIMCO Edit 5.11.89
- Updated CNC-Calc.
- Fixed problem printing in some cases when NC-Base header print was active.
CIMCO DNC-Max 5.11.89
- Fixed problem printing in some cases when NC-Base header print was active.
- Fixed problem with missing spaces when specifying multiple parameters to the external program executed before a remote request is send.
CIMCO MDC-Max 5.11.89
- Fixed problem using counters on table/graphs when summarizing multiple machines.
- Fixed problem selecting the 'Invert indicator light' on the operator screen setup.
Changes since previous version:
CIMCO Edit 5.11.88
- Updated CNC-Calc.
CIMCO DNC-Max 5.11.88
- Added 'Use translator on path' option to remote request sets Ref: Port/Configure Port/Remote Request/Set/Path/Use translator on path
- Added additional information to system.log.
- Fixed problem with the Auto Receive 'Use translator on path' option when using a separate directory trigger.
Changes since previous version:
CIMCO Edit 5.11.87
- Updated CNC-Calc.
- Fixed Japanese font issue on NC-Assistant balloons.
CIMCO DNC-Max 5.11.87
- Changed Handheld Terminals to not remember start line/block number.
- Changed Handheld Terminals so only enabled restart option are available.
Changes since previous version:
CIMCO DNC-Max 5.11.86
- Added support for sending Camlink 3.5 Mazatrol Files.
- Added 'Select All' and 'Clear Selection' buttons on the 'Send File' dialog and changed the selection method to be more suitable for touch screens when running the client in minimal mode (DNCAdmin5.exe /minimal)
- Fixed problem selecting all files using Ctrl+A on the 'Send File' dialog.
- Fixed problem with server reporting "Port is not in the database" in some cases.
CIMCO NC-Base 5.11.86
- Added support for importing comments from Camlink 3.5 Mazatrol Files.
- Fixed problem with NC-Base setting associated files read-only in some cases when 'Use read-only system' was disabled.
Changes since previous version:
CIMCO Edit 5.11.85
- Fixed Japanese font issue on the back plot tool list.
CIMCO DNC-Max 5.11.85
- Fixed problem printing auto received programs when the program was placed on the NC-Base import queue.
CIMCO NC-Base 5.11.85
- Added confirmation dialog when setting programs read-only/read-write and locked/unlocked.
- Added option to un-lock NC-Base program when rejecting a program on the import queue. Ref: NC-Base/Setup/Server/Un-lock when rejecting imports
- Fixed incorrect log message when transfer was exceeded in the Directory Monitor Protocol.
- Fixed problem locking received programs when auto receive set was set to lock received program and global setting was unlock.
- Fixed problem with transfer limit ignored when sending from the NC-Base client to Directory Monitor port.
Changes since previous version:
CIMCO DNC-Max 5.11.84
- Reduced NPort Direct and Quatech Direct connection time when many devices are off-line.
- Fixed problem connecting to Quatech Device Servers with multiple ports.
CIMCO MDC-Max 5.11.84
- Added support for specifying Y-axis major/minor divisions on graphs. Ref: Setup/System Setup/Table / Graphs/Layout/Y-Axis major Ref: Setup/System Setup/Table / Graphs/Layout/Y-Axis minor
- Added additional format specifies.
Changes since previous version:
CIMCO DNC-Max 5.11.83
- Added support for connecting directly over TCP/IP to Quatech Device Servers without installing a Quatech driver. Ref: Setup/Configure Port/Serial Device/Device Type/Quatech Direct
Changes since previous version:
CIMCO Edit 5.11.82
- Updated back plot.
- Fixed problem with 360 degrees arcs in CNC-Calc.
CIMCO DNC-Max 5.11.82
- Fixed problem with ports not always showing up in client after connecting to a remote server.
Changes since previous version:
CIMCO Edit 5.11.81
- Added option to print file modified time, database modified time and 'Modified by' on NC-Base print headers. Ref: Database/Setup/Server Settings/Printing
- Updated CNC-Calc.
CIMCO DNC-Max 5.11.81
- Fixed incorrect NC-Base log messages when trying to send a program that has reached the transfer limit.
CIMCO MDC-Max 5.11.81
- Increased maximum number of states on live screens.
Changes since previous version:
CIMCO Edit 5.11.80
- Updated back plot.
- Updated CNC-Calc.
CIMCO DNC-Max 5.11.80
- Added support for specifying a repeat count for sub-programs. Ref: Setup/Configure Port/Transmit/Sub-program Expand/Repeat trigger
- Added option to lock received programs in NC-Base based on the auto receive set. Ref: Setup/Configure Port/Auto Receive/Set/NC-Base/Lock received program
- Fixed problem un-locking existing programs when updating NC-Base.
CIMCO MDC-Max 5.11.80
- Improved printing of compact tables.
- Fixed problem with timers on live screens. (Introduced in 5.11.79)
Changes since previous version:
CIMCO Edit 5.11.79
- Added option in CNC-Calc to specify maximum angle of generated arcs.
- Updated back plot.
- Reduce Editor startup time.
- Fixed problem with overwriting DXF files in CNC-Calc.
CIMCO DNC-Max 5.11.79
- Added support storing the original filename in NC-Base when auto receiving files in the directory monitor protocol. Ref: Setup/Configure Port/Auto Receive/Set/NC-Base/ Save original filename in NC-Base
- Added support for renaming files using an NC-Base field when sending files in the directory monitor protocol. Ref: Setup/Configure Port/Directory Scan/Rename file mode
- Fixed problem expanding sub-programs in some cases.
CIMCO MDC-Max 5.11.79
- Reduced MDC-Max client startup time when using complex configurations.
CIMCO NC-Base 5.11.79
- Increased size of 'Add Change Comment' dialog.
- Fixed problem saving DSN password when using MS SQL.
Changes since previous version:
CIMCO Edit 5.11.78
- Updated CNC-Calc.
- Fixed problem with the back plot background 'No Gradient' option being inverted.
CIMCO DNC-Max 5.11.78
- Fixed problem with the template that automatically inserts/removes monitoring macros.
CIMCO MDC-Max 5.11.78
- Fixed problem with live screens freezing in some cases when large number of ports/screens were active.
Changes since previous version:
CIMCO Edit 5.11.77
- Added option to disable gradient backgrounds in the back plot. Ref: Setup/Global Setup/Global Colors/No Gradient
CIMCO DNC-Max 5.11.77
- Added command line option to start the DNC-Max client in "minimal mode". Ref: DNCAdmin5.exe /minimal
- Added option to hide all send/receive functions in the DNC-Max client. Ref: Setup/Configure Client/Hide all send/receive functions
- Fixed problem with handshake timeouts not working when using NPort Direct.
CIMCO NC-Base 5.11.77
- Changed NC-Base to set the locked status when copying a program to the same as the original program when the user does not have permissions to un-lock programs.
- Fixed problem with program file being read only after over writing an existing program file.
Changes since previous version:
CIMCO MDC-Max 5.11.76
- Added support for reading variables from an Excel Spreadsheet. Ref: Setup/System Setup/Excel Variables
- Added option to specify report directory. Ref: Setup/System Setup/Client Settings/Report directory
- Fixed problem restart the DNC-Max server while updating the MDC cache.
Changes since previous version:
CIMCO Edit 5.11.75
- Fixed Heidenhain CYCL 7 back plot issue.
Changes since previous version:
CIMCO DNC-Max 5.11.74
- Fixed problem with the Push Button option on I4000 I/O units creating extra messages.
CIMCO MDC-Max 5.11.74
- Increased maximum number of timers to 64.
- Fixed problem with the timer 'Restart condition'.
Changes since previous version:
CIMCO Edit 5.11.73
- Updated back plot.
- Updated CNC-Calc.
CIMCO DNC-Max 5.11.73
- Added Fagor 8055T protocol.
- Updated protocol template that automatically inserts/removes monitoring macros.
- Increased maximum number of debug logs to 16.
- Fixed problem with the NPort simulator when no script file was available.
Changes since previous version:
CIMCO Edit 5.11.72
- Updated back plot.
- Updated CNC-Calc.
CIMCO DNC-Max 5.11.72
- Added option to redirect barcodes to a different port/machine. Ref: Setup/Configure Port/Messaging/Barcode Redirect
CIMCO NC-Base 5.11.72
- Improved error messages when creating an NC-Base backup.
Changes since previous version:
CIMCO Edit 5.11.71
- Fixed back plot toolbar problem (introduced in 5.11.70).
Changes since previous version:
CIMCO Edit 5.11.70
- Added Cancel button on the base directory move dialog.
- Updated back plot.
- Fixed crash in some cases when using the /plot & /minimalplot options.
CIMCO DNC-Max 5.11.70
- Added protocol template that automatically inserts monitoring macros.
- Increased maximum length of FAPT comments.
- Updated Fagor 804x/805x protocol with a new command for 8055T controls.
CIMCO NC-Base 5.11.70
- Added option to un-lock NC-Base program when accepting a program on the import queue. Ref: NC-Base/Setup/Server/Un-lock when accepting imports
Changes since previous version:
CIMCO Edit 5.11.69
- Updated back plot.
CIMCO DNC-Max 5.11.69
- Added option show the first comment of the requested program and let the operator Confirm/Cancel the transfer when using a hand held terminal. Ref: Port/Setup/Handheld Terminals/Confirm request / show first comment
- Added option to extract FAPT comments in the NC-Base program format setup using the extract option 'First program comment' Ref: NC-Base/Setup/Machines/Program Format/First program comment
CIMCO MDC-Max 5.11.69
- Fixed problem with the TIMERPREV[] and TIMERLAST[] functions when using a 'Restart Condition'.
CIMCO NC-Base 5.11.69
- Added option to extract FAPT comments in the NC-Base program format setup using the extract option 'First program comment' Ref: NC-Base/Setup/Machines/Program Format/First program comment
Changes since previous version:
CIMCO Edit 5.11.68
- Updated back plot.
CIMCO MDC-Max 5.11.68
- Changed behavior of the timer 'Restart condition'.
Changes since previous version:
CIMCO DNC-Max 5.11.67
- Added Moxa NPort Simulator. The simulator supports up to 16 serial ports where port 1-2, 3-4 etc. are looped together. Monitoring simulation data can be defined in a script file. See DNCMax5\Utils\NPortSim for more information.
- Added support for restarting Moxa DE-311 units when using NPort Direct ports.
- Fixed 'Rename file mode' option in the directory monitor protocol.
CIMCO MDC-Max 5.11.67
- Added option to ignore the clear condition for a timer. Ref: Setup/System Setup/Timers/Ignore 'Clear Conditions' on graphs
- Fixed incorrect part counts in MDC-Max OEE calculations in some cases.
Changes since previous version:
CIMCO Edit 5.11.66
- Added button to start the Windows Calculator.
- Updated CNC-Calc.
- Fixed problem with measuring in back plot turning mode.
Changes since previous version:
CIMCO Edit 5.11.65
- Added keyboard shortcut to upper case text (CTRL+U).
- Updated CNC-Calc.
- Updated back plot.
CIMCO DNC-Max 5.11.65
- Fixed problem adding files to the NC-Base import queue in the directory monitor protocol. (Introduced in 5.11.64).
- Fixed problem remote requesting file in some cases in the directory monitor protocol. (Introduced in 5.11.62).
CIMCO NC-Base 5.11.65
- Changed NC-Backup Server configuration dialog to automatically convert the backup paths into a UNC name.
Changes since previous version:
CIMCO Edit 5.11.64
- Removed 'Max column indicator' from Mazatrol previews.
CIMCO DNC-Max 5.11.64
- Fixed problem with directory monitor protocol not creating a new version when the 'Skip import queue' option was enabled.
- Fixed problem with directory monitor protocol not deleting auto received files when exporting to NC-Base.
Changes since previous version:
CIMCO Edit 5.11.63
- Updated installation.
CIMCO DNC-Max 5.11.63
- Updated installation.
Changes since previous version:
CIMCO Edit 5.11.62
- Added support for sending files opened in the editor directly to DNC-Max. Ref: Setup/DNC-Max Client/Allow users to send 'Local Files'
- Added option to send files stored on the client PC to DNC-Max Ref: Setup/DNC-Max Client/Allow users to send 'Local Files' Ref: DNC-Max Client/Send Data in Current Window
- Updated CNC-Calc.
CIMCO DNC-Max 5.11.62
- Added support for sending file directly from CIMCO Edit.
- Added support for sending local files with the directory monitor protocol.
Changes since previous version:
CIMCO Edit 5.11.61
- Updated CNC-Calc.
- Improved NC-Assistant layout.
CIMCO DNC-Max 5.11.61
- Fixed problem with first messages without a trigger being used for all barcodes or DPRNT style messages.
Changes since previous version:
CIMCO Edit 5.11.60
- Added option to the NC-Assistant to not insert empty lines when a parameter was not specified. Ref: NC Functions/Macro Setup/Do not insert empty lines
- Changed NC-Assistant to scale input fields to fit text lengths.
- Updated CNC-Calc.
- Updated back plot.
CIMCO DNC-Max 5.11.60
- Fixed problem with Moxa E2210/I4000 I/O units generating extra log messages in some cases.
CIMCO MDC-Max 5.11.60
- Added option to enable/disable processing of historical data in MDC-Max. Ref: Setup/Configure Server/MDC-Max/ Pre-process monitoring data to get accurate historical information
- Added option to delete old MDC data. Ref: Setup/Configure Database/Monitoring Data/Delete MDC data older than
CIMCO NC-Base 5.11.60
- Fixed problem with backing up large databases.
Changes since previous version:
CIMCO Edit 5.11.59
- Added option to specify NC-Base tool trigger as an advanced trigger.
- Updated back plot.
- Updated CNC-Calc.
- Fixed problem backing up deleted files in NC-Base that were moved to the offline folder.
- Fixed problem with the NC-Base integrity check showing an incorrect 'File deleted' message.
CIMCO DNC-Max 5.11.59
- Added support for collecting data with Moxa I4000 Network I/O servers. Ref: Setup/Configure Server/Network I/O
CIMCO NC-Base 5.11.59
- Added option to ignore missing backups in the NC-Base backup server.
- Fixed problem backing up deleted files that were moved to the offline folder.
Changes since previous version:
CIMCO Edit 5.11.58
- Updated back plot.
CIMCO DNC-Max 5.11.58
- Fixed problem with the 'Do not place received files on the import queue' option not copying the received file.
Changes since previous version:
CIMCO Edit 5.11.57
- Added support for specifying alternate names for NC commands in the back plot. Ref: Setup/Back plot/Map letters
- Added option to specify the directory uses to store delete files in NC-Base. Ref: Database/Setup/Server Setting/Other/Delete files directory
- Updated back plot MillPlus, Fagor and Haas support.
- Fixed problem with tool paths not always shown in the back plot.
CIMCO DNC-Max 5.11.57
- Improved Direct TCP/IP connection time when many devices are offline (turned off).
- Fixed problem using multi line translators when the Serial Booster was enabled.
CIMCO MDC-Max 5.11.57
- Improved handling of undefined values.
CIMCO NC-Base 5.11.57
- Added option to import programs directly for selected auto receive configurations. Ref: Setup/Configure Port/Auto Receive/Set/NC-Base/ Do not place received files on the import queue
- Added option to overwrite Read-only programs for selected auto receive configurations. Ref: Setup/Configure Port/Auto Receive/Set/NC-Base/ Overwrite Read-Only programs
- Added option to automatically set programs to 'Approved' for selected auto receive configurations. Ref: Setup/Configure Port/Auto Receive/Set/NC-Base/ Mark received programs as 'Approved'
Changes since previous version:
CIMCO Edit 5.11.56
- Added option to disable Editor modules from the command line. Disable NC-Base by specifying /NOBASE on the command line. Disable CNC-Calc by specifying /NOCALC on the command line. Disable Back plot by specifying /NOPLOT on the command line. Disable Back plot by specifying /NOPLOT on the command line. Disable Math/Macros by specifying /NONC on the command line.
- Added Cutoff in CNC-Calc turning.
- Changed CNC-Calc to add files to the recent list when opening a file.
- Added field in the NC-Base Advanced search options to search all fields in the database.
- Added option to disable NC-Base by specifying /NOBASE on the command line.
- Fixed problem generating NC-Base version reports.
CIMCO DNC-Max 5.11.56
- Added option to support scanning barcodes without a fixed trigger string using 2 barcodes. Ref: Setup/Configure Server/Events / Message/Extract Value/ Next line if received within 3/10/60s
- Added option to apply auto receive translator to path extracted by separate directory trigger. Ref: Setup/Configure Port/Auto Receive/Set/Path/Use translators on path
- Fixed problem backing up open files in the NC-Base Backup Server.
Changes since previous version:
CIMCO Edit 5.11.55
- Added option to Copy / Paste program info in NC-Base. Ref: Right Click/Copy Program Info Ref: Right Click/Paste Program Info
- Updated NC-Base tool list generator.
- Fixed problem with the 'Confirm Program Exit' option.
CIMCO DNC-Max 5.11.55
- Added support for waiting for XOn in the middle of a line, by specifying an advanced trigger in the 'Wait for XOn on lines matching' field.
- Added option to get skip reading the device server model and firmware level in the Direct TCP/IP setup. Ref: Setup/Configure Port/Serial Device/Do not read device info
- Changed the default in the Direct TCP/IP setup to not restart units when restarting.
- Changed Direct TCP/IP to ignore firmware bug in NPort 5110 / 5210.
CIMCO MDC-Max 5.11.55
- Fixed error in the OEE calculations.
Changes since previous version:
CIMCO Edit 5.11.54
- Fixed crash when file contained very long macros.
CIMCO DNC-Max 5.11.54
- Fixed problem backing up open files with the NC-Base manual backup.
Changes since previous version:
CIMCO Edit 5.11.53
- Updated CNC-Calc.
CIMCO DNC-Max 5.11.53
- Added all port messages to the service log.
- Fixed problem backing up server and restoring the server configuration from a remote client when the server had >20 ports.
CIMCO MDC-Max 5.11.53
- Fixed problem disabling the MDC-Max cache function in the client.
CIMCO NC-Base 5.11.53
- Added support for importing the filename directly with the NCBaseConverter utility.
Changes since previous version:
CIMCO Edit 5.11.52
- Added option to restart block numbers on lines starting with the specified trigger. Ref: Setup/Block Numbers/Restart on lines starting with
CIMCO DNC-Max 5.11.52
- Changed default number of simultaneous connection attempts when using Direct TCP/IP connections.
Changes since previous version:
CIMCO DNC-Max 5.11.51
- Fixed problem with Direct TCP/IP connections when many ports were offline.
CIMCO MDC-Max 5.11.51
- Fixed crash in DNC-Max server when running MDC-Max and an invalid sum length/interval was specified for one or more timers/counters.
Changes since previous version:
CIMCO Edit 5.11.50
- Added thousand separator to line number and file size indicator.
- Updated CNC-Calc.
- Fixed crash in CNC-Calc when loading threading parameter file.
- Fixed problem when adding file to NC-Base that was located in the program directory but not using the same drive specification as the destination file.
CIMCO DNC-Max 5.11.50
- Added support for using the barcode protocol to generate monitoring messages.
- Fixed problem with the "Ignore errors" option not working when using the Direct TCP/IP connection.
- Fixed potential handle leak in Heidenhain monitoring protocol.
- Fixed problem connection to device servers when using a Direct TCP/IP port.
- Fixed problem selecting the port associated with a barcode reader.
- Fixed problem with continuous high CPU utilization when using MDC-Max.
CIMCO MDC-Max 5.11.50
- Fixed problem with the multiple machines operator screen.
- Fixed problem with monitor variable 2 not set correctly.
- Fixed problem with the "Remove empty rows / column groups" in compact mode.
Changes since previous version:
CIMCO DNC-Max 5.11.49
- Added option to apply Auto Receive and Remote Request name translators to the filename or pathname only.
CIMCO MDC-Max 5.11.49
- Added option to display multiple machines on a single operator screen. Ref: Setup/System Setup/Operator Screens/Multiple machines on one screen
Changes since previous version:
CIMCO Edit 5.11.48
- Added threading in CNC-Calc turning.
CIMCO DNC-Max 5.11.48
- Fixed problem changing the configuration in some protocols. (introduced in 5.11.47).
- Fixed problem sending some Mazatrol files from an older control model to a newer control.
Changes since previous version:
CIMCO DNC-Max 5.11.47
- Added option to prevent auto import of programs marked as Read-Only. Ref: Setup/Configure Server/NC-Base/Auto Import/ Do not overwrite Read-Only programs
- Increased maximum number of ports per server from 250 to 1000.
- Improved server startup speed.
- Fixed crash in DNC-Max server when client was previewing some files.
- Change Direct Connection IP address to default to the Port Ping Address.
CIMCO MDC-Max 5.11.47
- Removed empty tables when using the "Remove empty rows / column groups" option.
- Improved performance when generating table/graphs for a single machine or group of machines.
- Fixed problem specifying the location of the row titles when exporting to Excel.
- Fixed problem calculating start time for monthly reports.
- Fixed problem when tables/graphs had more than 128 jobs/programs or intervals.
Changes since previous version:
CIMCO Edit 5.11.46
- Added 'Save' button to the Mini DNC receive dialog.
CIMCO DNC-Max 5.11.46
- Added support for connecting directly over TCP/IP to Moxa NPort devices without installing a Moxa driver.
- Added new QTerm-II setup program QSET2.EXE that works on Windows XP.
- Improved directory listing speed on older controls connected through Ethernet device servers using the Heidenhain FE mode protocol.
- Fixed problem with ISO transfer in the Mazak protocol not starting when no 'Start send timeout' was specified.
- Fixed problem requesting a second file in the FAPT protocol.
- Fixed DNC-Max server crash when sending some file from the NC-Base client.
- Fixed server hang / network busy error when using the debug log on Windows Vista.
- Fix problem specifying the multi request job root directory.
- Fix problem with translators going into a loop (introduced in 5.11.38).
Changes since previous version:
CIMCO DNC-Max 5.11.45
- Fixed problem with scanning only specified extensions in the directory monitor template.
CIMCO MDC-Max 5.11.45
- Added support for caching all states to get full historical information on live screens and table/graphs.
Changes since previous version:
CIMCO Edit 5.11.44
- Added grooving support in CNC-Calc turning.
- Fixed problem receiving files with the CIMCODNC.EXE utility.
CIMCO DNC-Max 5.11.44
- Added option to rename files when sending a file using the directory monitor protocol. Ref: Setup/Configure Port/Directory Scan/Rename
- Added ISO start transfer timeout to the Mazak protocol. Ref: Setup/Configure Port/ISO Transfer/Advanced/Start send timeout
- Added option to clear the list of selected Mazatrol programs. Ref: Setup/Configure Port/Mazatrol Transfer/Advanced/ Clear selection on remote request Ref: Setup/Configure Port/Mazatrol Transfer/Advanced/ Clear selection on manual send Ref: Setup/Configure Port/Mazatrol Transfer/Advanced/ Clear selection on NC-Base send
- Fixed problem sending Mazatrol files containing multiple work numbers and an invalid header.
- Fixed problem with recursive file requests not finding files when directories had some special characters.
Changes since previous version:
CIMCO Edit 5.11.43
- Updated CNC-Calc.
- Updated back plot.
CIMCO DNC-Max 5.11.43
- Added option to select the 'IP Address' column in the DNC-Max client configuration. Ref: Setup/configure Client/Port List/Show IP Address
Changes since previous version:
CIMCO Edit 5.11.42
- Fixed crash when generating a version report (introduced in 5.11.40).
Changes since previous version:
CIMCO Edit 5.11.41
- Fixed crash when creating a new file (introduced in 5.11.40).
Changes since previous version:
CIMCO Edit 5.11.40
- Added error message when trying to copy a NC-Base program to it self.
- Added support for generating 'Version Reports' in NC-Base.
CIMCO DNC-Max 5.11.40
- Added option to show the port IP (Ping) Address in the DNC-Max client port list.
- Fixed problem sending Mazatrol programs from older control types when file was stored without a header.
- Fixed problem using right click on Mazak ports and selecting 'Send Recent File' on files last sent from the Manual tab.
- Fixed problem selecting file on the Mazak manual tab when ISO transfer was disabled.
- MDC-Max update.
Changes since previous version:
CIMCO Edit 5.11.39
- Added option to specify a range for the values that should be updated when modifying the feed/speed of a program.
- Back plot updated.
- Fixed problem with find next/previous tool change with some machine types.
CIMCO DNC-Max 5.11.39
- Added support for limited monitoring of TNC controls without the DNC option.
Changes since previous version:
CIMCO Edit 5.11.38
- Updated back plot.
- Updated CNC-Calc.
CIMCO DNC-Max 5.11.38
- Added option to rename files to the program O-Number when sending a file using the directory monitor protocol.
Changes since previous version:
CIMCO Edit 5.11.37
- Updated CNC-Calc.
CIMCO DNC-Max 5.11.37
- Added additional 'End Of Feed' options to the Mazak protocol.
- Updated MDC-Max.
Changes since previous version:
CIMCO Edit 5.11.36
- Updated CNC-Calc.
CIMCO DNC-Max 5.11.36
- Added NC-Base log messages when operator tried to send/request a locked file.
- Fixed accuracy problem with the receive timeout in the Mazak and standard protocols.
- Fixed problem with the Mazak protocol logging the wrong program number/ comment when sending a T2 program to a T32 or newer.
- Fixed missing long message in NC-Base when remote requesting a file from the Directory Monitor Protocol.
Changes since previous version:
CIMCO DNC-Max 5.11.35
- Fixed problems adding programs to the NC-Base import queue from the Fagor 8040/50/55 protocol.
- Changed translation triggers to scan entire string multiple time when using advanced trigger.
Changes since previous version:
CIMCO Edit 5.11.34
- Added column in NC-Base view to show if import is waiting.
- Updated CNC-Calc.
- Changed NC-Base to lock existing program when adding a program to the import queue and 'Lock All' is selected.
CIMCO DNC-Max 5.11.34
- Changed NC-Base to lock existing program when adding a program to the import queue and 'Lock All' is selected.
- Changed the standard protocol to allow request redirection to more than 8 other ports.
Changes since previous version:
CIMCO Edit 5.11.33
- Added name of machine that send/received a file to the NC-Base log.
- Updated CNC-Calc.
- Fixed problem with , being replaced with . just after pressing decimal character on the numeric keypad.
CIMCO DNC-Max 5.11.33
- Added name of machine that send/received a file to the NC-Base log.
- Fixed problem with NC-Base backup server sending an 'Backup failed' e-mail notification when files were waiting on the import queue.
Changes since previous version:
CIMCO DNC-Max 5.11.32
- Added support for a barcode reader protocol in the handheld terminal setup.
Changes since previous version:
CIMCO Edit 5.11.31
- Increased length of Search / Replace strings.
- Fixed problem with the auto save option when using NC-Base.
CIMCO DNC-Max 5.11.31
- Fixed log message to show correct destination name when remote requesting a file using the Directory Monitor protocol.
- Fixed problem adding Mazatrol files containing path information to the database.
Changes since previous version:
CIMCO DNC-Max 5.11.30
- MDC-Max updated.
- Fixed problem using < and > as start tag in auto receive / remote request configurations.
Changes since previous version:
CIMCO Edit 5.11.29
- Added support for extracting Mazak Matrix program comments in NC-Base.
- Added option to specify a 'From address' in the NC-Base backup server.
CIMCO DNC-Max 5.11.29
- Added support for Mazak Matrix controls in the directory monitor protocol.
- Added option to specify a 'From address' in the NC-Base backup server.
- Fixed problem with the 'Ignore NC-Base settings' option.
- Fixed problem with the Mazak Mazatrol package option did not delete the 'package program' when saving a new package.
CIMCO Software 5.11.28 Released: 07-09-07Changes since previous version:
CIMCO Edit 5.11.28
- Fixed problem updating NC-Base when opening database files from Windows Explorer
Changes since previous version:
CIMCO DNC-Max 5.11.27
- Added options to ignore NC-Base settings when remote requesting. Ref: Setup/Configure Port/Remote Request/Set/Advanced/ Ignore NC-Base locked status Ref: Setup/Configure Port/Remote Advanced/Set/Advanced/ Ignore NC-Base settings
Changes since previous version:
CIMCO DNC-Max 5.11.26
- Added 'Package Mode' option to the Mazak protocol. Ref: Setup/Configure Port/Mazatrol Transfer/Advanced/Enable Package Mode
Changes since previous version:
CIMCO DNC-Max 5.11.25
- Updated MDC-Max.
Changes since previous version:
CIMCO Edit 5.11.24
- Updated CNC-Calc.
CIMCO DNC-Max 5.11.24
- Updated MDC-Max.
Changes since previous version:
CIMCO Edit 5.11.23
- Updated CNC-Calc.
CIMCO DNC-Max 5.11.23
- Updated MDC-Max.
- Updated license server to look for any files called .key.
Changes since previous version:
CIMCO Edit 5.11.22
- Added command line option to select the language: /lang=XX
- Fixed problem Adding/Updating the NC-Base memo file.
CIMCO DNC-Max 5.11.22
- Updated MDC-Max.
Changes since previous version:
CIMCO Edit 5.11.21
- Added option enable/disable print of header on the first page. Ref: Setup/Printer Setup/Print header on first page
- Increased maximum number of lines in macros to 2000.
- Updated CNC-Calc.
- Fixed problem with CNC-Calc diameter programming.
- Fixed problem detecting corrupted Unicode files.
- Fixed problem when printing the filename on the NC-Base print header.
- Fixed problem with auto import creating temporary files when importing information from an associated file, and the associated file was not found.
CIMCO DNC-Max 5.11.21
- Added support for requesting files from a different port in the Mazak protocol. Ref: Setup/Configure Port/Mazatrol Transfer/Advanced/Alias Requests
- Updated MDC-Max.
- Updated Directory Monitor template to add entry to NC-Base log when sending a program.
- Fixed problem with the auto receive/remote request test fields not updating in the directory monitor protocol configuration.
- Fixed problem with auto import creating temporary files when importing information from an associated file, and the associated file was not found.
- Fixed problem detecting when Moxa E2210 I/O modules went offline.
Changes since previous version:
CIMCO Edit 5.11.20
- Added 'Yes To All' / 'No To All' when updating NC-Base associated files.
- Updated NC-Base tool list generator.
- Fixed problem with the CNC-Calc toolbars.
- Fixed problem receiving file into existing window.
CIMCO DNC-Max 5.11.20
- Updated NC-Base tool list generator.
- MDC-Max update.
- Fixed server crash when sending multiple associated files from NC-Base.
Changes since previous version:
CIMCO Edit 5.11.19
- Updated CNC-Calc.
- Fixed problem opening files in the editor when clicking on a file in the DNC-Max client log inside CIMCO Edit.
- Fixed problem associating setup/tool/memo files in some cases.
- Fixed crash when previewing some files in NC-Base.
CIMCO DNC-Max 5.11.19
- MDC-Max update.
Changes since previous version:
CIMCO DNC-Max 5.11.18
- MDC-Max update.
- Fixed port hang after receiving data on some systems.
Changes since previous version:
CIMCO Edit 5.11.17
- MDC-Max update.
CIMCO DNC-Max 5.11.17
- MDC-Max update.
Changes since previous version:
CIMCO Edit 5.11.16
- Updated back plot.
CIMCO DNC-Max 5.11.16
- MDC-Max update.
Changes since previous version:
CIMCO DNC-Max 5.11.15
- Fixed problem with the 'Send unlocked programs only' option in the directory monitor template.
Changes since previous version:
CIMCO Edit 5.11.14
- Updated CNC-Calc.
CIMCO DNC-Max 5.11.14
- Updated MDC-Max.
Changes since previous version:
CIMCO Edit 5.11.13
- Added support for specifying multiple 'Field Folders' in NC-Base. Ref: Database/Setup/Server Settings/Other
- Updated CNC-Calc.
CIMCO DNC-Max 5.11.13
- Added support for sending files from the client to Agie Classic/Evolution controls.
- Added support for specifying breaks in the MDC-Max schedule.
- Added support for specifying multiple 'Field Folders' in NC-Base.
- Fixed problem with the TNC426/430/530 monitoring protocol.
- Fixed problem running the server on Windows NT4.
Changes since previous version:
CIMCO Edit 5.11.12
- Updated back plot.
- Updated CNC-Calc.
- Fixed problem importing some DXF files in CNC-Calc.
CIMCO DNC-Max 5.11.12
- Added support for selecting an Excel template for each report in MDC-Max.
- Added option to use prefix/suffix when requesting programs in the Mazak protocol. Ref: Setup/Configure Port/Mazatrol Transfer/Advanced/ Prefix/Suffix on requests.
- Added port Online/Offline to the External/MDC log.
- Fixed problem printing multiple files using multi file print request.
Changes since previous version:
CIMCO Edit 5.11.11
- Updated CNC-Calc.
CIMCO DNC-Max 5.11.11
- Added OEE calculations to MDC-Max.
Changes since previous version:
CIMCO Edit 5.11.10
- Updated CNC-Calc.
CIMCO DNC-Max 5.11.10
- MDC-Max update.
- Fixed problem shutting down DNC-Max server (introduced in 5.11.08).
Changes since previous version:
CIMCO DNC-Max 5.11.09
- Added support for collecting data with Moxa E2210 Network I/O servers. Ref: Setup/Configure Server/Network I/O
- Fixed problem starting DNC-Max server (introduced in 5.11.08).
Changes since previous version:
CIMCO Edit 5.11.08
- Updated back plot.
- Fixed problem with CNC-Calc diameter programming.
CIMCO DNC-Max 5.11.08
- Added option to strip ASCII 0's when extracting DPRNT style messages. Ref: Setup/Configure Port/Messaging/DPRNT Messages/Strip ASCII 0's
Changes since previous version:
CIMCO Edit 5.11.07
- MDC-Max update.
CIMCO DNC-Max 5.11.07
- MDC-Max update.
Changes since previous version:
CIMCO Edit 5.11.06
- Updated CNC-Calc.
CIMCO DNC-Max 5.11.06
- MDC-Max update.
Changes since previous version:
CIMCO Edit 5.11.05
- Fixed problem with the CNC-Calc contour.
CIMCO DNC-Max 5.11.05
- Added support for extracting DPRNT style messages in the Mazak Mazatrol protocol.
- Fixed problem restarting ports in some cases, when the server had been running for more than a month.
Changes since previous version:
CIMCO Edit 5.11.04
- Updated CNC-Calc.
CIMCO DNC-Max 5.11.04
- Fixed problem with CTS/DST/DCD ping monitor when using a minimum cycle time. (Introduced in 5.10.94)
CIMCO Software 5.11.03 Released: 29-03-07Changes since previous version:
CIMCO Edit 5.11.03
- Added option to specify alternate block number character. Ref: Setup/Block Numbers/Alternate block number character
Changes since previous version:
CIMCO Edit 5.11.02
- MDC-Max update.
CIMCO DNC-Max 5.11.02
- Fixed MDC-Max DST problem.
Changes since previous version:
CIMCO DNC-Max 5.11.01
- Fixed incorrect 'Transfer Limit Reached' error messages when trying to send files that was not in the database.
Changes since previous version:
CIMCO Edit 5.10.99
- Updated CNC-Calc.
CIMCO DNC-Max 5.10.99
- Added option to rename the file in the Heidenhain FE mode protocol when using the 'Remote Send File' option. Ref: Setup/Configure Port/Remote Send File/Rename file to match BEGIN PGM
- Fixed problem with files locked after sending with the FTP send file option.
Changes since previous version:
CIMCO Edit 5.10.98
- Updated NC-Base program/file log.
- Updated CNC-Calc.
- Fixed problem with file notes when auto importing existing associated files into NC-Base.
- Fixed problem with the option to keep version number when changing status.
CIMCO DNC-Max 5.10.98
- Fixed problem with file notes when auto importing existing associated files into NC-Base.
Changes since previous version:
CIMCO Edit 5.10.97
- Added option to always use CIMCO Edit when opening NC-Base program files. Ref: Database/Setup/Client Settings/Disable external editors for programs
CIMCO DNC-Max 5.10.97
- Fixed problem with incorrect messages being generated when no trigger and no program name was specified for one or more DNC-Max messages.
Changes since previous version:
CIMCO Edit 5.10.96
- Added option to change the program name when accepting imported NC-Base programs using 'Accept Import File As'.
- Updated DNC to prompt users to discard files received with errors.
- Updated CNC-Calc.
- Updated back plot.
- Fixed problem with the DNC recently received file list.
- Fixed problem with the NC-Base backup purge function not active.
CIMCO DNC-Max 5.10.96
- MDC-Max update.
Changes since previous version:
CIMCO Edit 5.10.95
- Added NC-Base option to limit the number of time a file can be send. Ref: Database/Setup/Server Settings/Advanced/Use 'Transfer Limit Counter'
- Fixed problem generating pocket and contour operations in CNC-Calc.
CIMCO DNC-Max 5.10.95
- Added option to only send programs associated with the machine in NC-Base. Ref: Setup/Configure Port/NC-Base/Send programs for this machine only
- Added NC-Base option to limit the number of time a file can be send.
- Fixed problem generating pin monitor messages. (Introduced in 5.10.94)
Changes since previous version:
CIMCO Edit 5.10.94
- Added automatic backup when manually receiving into NC-Base using the editor DNC.
- Fixed problem with the 'Restore Latest Version' button not working.
CIMCO DNC-Max 5.10.94
- Added option to send a special message when detecting a pulsing signal with the pin monitors. Ref: Setup/Configure Port/Messaging/CTS Monitor / DSR Monitor / ...
- Added support for sending files to an FTP in the directory monitor protocol. Ref: Port/Configure Port/Advanced/Other
Changes since previous version:
CIMCO Edit 5.10.93
- Added option to disable storing editor file types in NC-Base. Ref: Database/Setup/Server Settings/Do not store editor file types in db
- Added option to keep version number when changing status. Ref: Database/Setup/Server Settings/Logging/ No new version when setting status
- Updated CNC-Calc
CIMCO DNC-Max 5.10.93
- Fixed problem with pin monitor messages sending the message for the inverted signal.
Changes since previous version:
CIMCO Edit 5.10.92
- Added support for receiving files into NC-Base when using the Editor DNC.
- Updated CNC-Calc.
- Changed NC-Base add program dialog to use values from existing program when replacing with a new program.
- Changed 'Tool Change' command to allow specifying M6 etc.
- Fixed problem with the 'Remember last cursor position'
- Fixed crash when loading file when using some languages.
CIMCO DNC-Max 5.10.92
- Fixed problem connection MS SQL NC-Base servers after running the server configuration from the client.
Changes since previous version:
CIMCO DNC-Max 5.10.91
- Added option to insert delays after a block of characters. Ref: Port/Configure Port/Transmit/Delays/Delay character block size
Changes since previous version:
CIMCO Edit 5.10.90
- Added CNC-Calc turning roughing cycles.
- Fixed problem running external converters on files on the import queue.
CIMCO DNC-Max 5.10.90
- Added support for sending SMS messages using a GSM/GPRS modem. Ref: Setup/Configure Server/E-mails \ SMS Settings / SMS Settings
Changes since previous version:
CIMCO Edit 5.10.89
- Changed files on the NC-Base import queue to read/write.
- Fixed problem with updating the NC-Base program info from the file. (Introduced in 5.10.86).
- Fixed NC-Base version problem with associated files.
- Fixed problem updating customer information when renaming a program on the import queue.
CIMCO DNC-Max 5.10.89
- Updated directory monitor protocol to detect file changes based on both timestamps and file contents.
- Updated name of weekly log files to sort better.
Changes since previous version:
CIMCO Edit 5.10.88
- Added support for undoing string replace operations on large files.
- Fixed problem with the 'Match string' option in the insert/remove string feature.
CIMCO DNC-Max 5.10.88
- Fixed problem with missing NC-Base log entries for received files.
Changes since previous version:
CIMCO Edit 5.10.87
- Added option to search for regular expressions with the insert/remove string feature.
Changes since previous version:
CIMCO Edit 5.10.86
- Added support for saving files under a sub-directory named after one of the NC-Base fields. Ref: Database/Setup/Server Settings/Use Field Folders
- Added option to synchronize the program created/modified time with the created/modified time of the associated program file. Ref: Database/Setup/Maintenance/Set Modified Date Ref: Database/Setup/Maintenance/Set Created Date
- Updated DXF reader in CNC-Calc.
- Updated back plot.
- Fixed problem changing customer multiple times when adding a program to NC-Base using customer folder.
- Fixed problem updating customer folders when changing machine group.
- Fixed problem updating program info when overwriting an existing program in NC-Base.
- Fixed problem copying associated files between programs.
- Fixed NC-Base version problem with programs on the import/approval queue.
CIMCO DNC-Max 5.10.86
- Added option to skip scanning of PC directories in the directory synchronizer. Ref: Port/Configure Port/Directory Synchronizer/ Do not scan PC for updates
Changes since previous version:
CIMCO Edit 5.10.85
- Updated back plot.
- Fixed problem modifying the name of programs on the import queue.
CIMCO DNC-Max 5.10.85
- MDC-Max update.
Changes since previous version:
CIMCO Edit 5.10.84
- Added option to copy or link associated files in NC-Base.
- Updated CNC-Calc.
- Fixed problem using the NC-Base 'Update program info from file' and 'Update file info from program' options.
- Fixed problem with buttons missing from NC-Base toolbar in some cases.
CIMCO DNC-Max 5.10.84
- Fixed problem saving ISO/EIA files in Griffo binary Mazatrol file.
- Fixed incorrect log text in when using the directory synchronizer.
- Fixed problem with the 'Create sub-directory on the CNC' option in the directory monitor protocol.
Changes since previous version:
CIMCO Edit 5.10.83
- Added support for saving file compare result to a file.
CIMCO DNC-Max 5.10.83
- Added option to limit number of files in Heidenhain FE mode directory listings. Ref: Port/Configure Port/General Options/ Limit directory list this many files
- Fixed problem sending Griffo CMT files containing ISO/EIA programs in the Mazak protocol.
- Fixed problem when sending directory list and indenting program lines.
Changes since previous version:
CIMCO Edit 5.10.82
- Added option to restore NC-Base SQL dump files.
- Added support for renaming programs on the NC-Base import queue.
- Updated back plot.
- Fixed problem opening import files when more than one import per program was enabled.
CIMCO DNC-Max 5.10.82
- Added option to look for remote requested files in the order specified in the 'Additional extensions' field: Ref: Port/Configure Port/Remote Request/Set/Filename/ Look for additional extensions in specified order
- Added support for using the $SENDROOT/$RECVROOT options in the directory monitor protocol.
- Fixed problem specifying the operator trigger in the server message setup.
Changes since previous version:
CIMCO Edit 5.10.81
- Updated back plot.
Changes since previous version:
CIMCO Edit 5.10.80
- Added support for extracting Mazatrol program/work numbers in the NC-Base program format setup. Ref: Database/Setup/Machine/Program Format/Extract From : Mazak ...
- Added support for sending multiple programs from NC-Base.
- Added option to use wildcards in NC-Base program searches only. Ref: Database/Setup/Client Settings/Search Settings/ Always use wildcard in program searches
- Updated CNC-Calc.
- Updated back plot.
- Fixed problem sorting by part number when using the NC-Base Family of parts options with MS SQL.
- Fixed problem when NC-Base only an end trigger was specified in the program format setup.
- Fixed problem with NC-Base program version updated when saving an unchanged file.
CIMCO DNC-Max 5.10.80
- Added support for extracting Mazatrol program/work numbers in the NC-Base program format setup. Ref: Database/Setup/Machine/Program Format/Extract From : Mazak ...
- Fixed problem when NC-Base only an end trigger was specified in the program format setup.
- Fixed problem selecting send / receive directory on the manual tab.
Changes since previous version:
CIMCO Edit 5.10.79
- Updated CNC-Calc.
- Fixed misleading NC-Base log entry when received file was read-only.
- Fixed problem when NC-Base auto logout was performed and one or more files were open.
- Fixed crash in the CNC-Calc pocket operation.
- Fixed crash in the CNC-Calc facing operation.
CIMCO DNC-Max 5.10.79
- Fixed misleading NC-Base log entry when received file was read-only.
Changes since previous version:
CIMCO Edit 5.10.78
- Internal release.
CIMCO DNC-Max 5.10.78
- Internal release.
Changes since previous version:
CIMCO DNC-Max 5.10.77
- Fixed problem clearing the disk directory in the Mazak protocol.
Changes since previous version:
CIMCO Edit 5.10.76
- Added message in NC-Base to confirm rejection of imported programs.
- Updated CNC-Calc
- Updated Back plot
- Fixed crash when using 'Close other windows' on Back plot or CNC-Calc tab.
Changes since previous version:
CIMCO DNC-Max 5.10.75
- Fixed problem selecting the port on the pin monitor setup pages.
Changes since previous version:
CIMCO Edit 5.10.74
- Added additional turning functions to CNC-Calc.
- Fixed CNC-Calc compensation problem.
CIMCO DNC-Max 5.10.74
- Internal release.
Changes since previous version:
CIMCO Edit 5.10.73
- Internal release.
Changes since previous version:
CIMCO DNC-Max 5.10.72
- Fixed problem selecting files from directories with a large number of files from a local client when running the server as a service.
- Fixed problem with manual send also sending files that were edited using the 'Edit' button.
Changes since previous version:
CIMCO Edit 5.10.71
- Changed file dialog to preserve the file case to prevent problems when selecting files stored on UNIX file servers.
CIMCO DNC-Max 5.10.71
- Added name of server with conflicting license to the server log.
- Added option to specify read block size.
- Changed file dialog to preserve the file case to prevent problems when selecting files stored on UNIX file servers.
Changes since previous version:
CIMCO Edit 5.10.70
- Added option to specify the locations of the machine type configuration files (*.mac). Ref: Setup/Global/Plugins/Type file path
- Changed NC-Base to prevent user from overwriting existing read-only programs when adding a new program unless the user has permissions to set programs read-write.
- Updated back plot.
CIMCO DNC-Max 5.10.70
- Fixed problem with ports being duplicated in NC-Base.
Changes since previous version:
CIMCO Edit 5.10.69
- Updated back plot.
- Fixed CNC-Calc crash.
- Fixed problem with missing text on the NC-Base 'Add Program' dialog.
CIMCO DNC-Max 5.10.69
- Fixed problem with configuring NC-Base auto import settings when running the DNC server setup from the service manager dialog.
Changes since previous version:
CIMCO DNC-Max 5.10.68
- Added AMC4 plasma cutter protocol.
Changes since previous version:
CIMCO Edit 5.10.67
- Fixed problem defining a new changed comment with the same description as a previously deleted comment.
CIMCO DNC-Max 5.10.67
- Added option to remote request a range of files to the standard and directory monitor protocols. Ref: Port/Configure Port/Remote Request/Set/Multi request/ Enable file range requests
- Change directory listings sort to sort numerical values correctly.
Changes since previous version:
CIMCO Edit 5.10.66
- Added support for importing multiple part numbers when using the NC-Base 'Family of parts' option.
- Updated CNC-Calc.
- Updated Back plot.
- Changed the NC-Base setting 'Add new edit programs' to be a local configuration option.
- Fixed problem auto importing NC-Base files into customer folders.
- Fixed crash creating NC-Base tool lists.
- Fixed problem with the path updating incorrectly when adding a new program to NC-Base.
- Fixed problem with the 'Move program file to machine directory' on the NC-Base 'Add new program' dialog.
- Fixed problem changing NC-Base password from the menu when no password was specified for the user.
- Fixed problem specifying the 'Max line' value when using multi line NC-Base program information triggers.
CIMCO DNC-Max 5.10.66
- Added support for importing multiple part numbers when using the NC-Base 'Family of parts' option.
- Changed remote print request to allow printing NC-Base associated files without printing the program file when not using a 'print only' request.
- Fixed problem re-directing CTS / DSR pin monitor events to other ports.
- Fixed problem auto importing NC-Base files into customer folders.
- Fixed crash creating NC-Base tool lists.
Changes since previous version:
CIMCO Edit 5.10.65
- Fixed problem moving NC-Base machine directory to/from a sub-directory.
CIMCO DNC-Max 5.10.65
- Added directory synchronizer to the network monitor protocol. Ref: Port/Configure Port/Directory Synchronizer
- Fixed problem sending files with the directory monitor protocol when the file was marked read-only.
Changes since previous version:
CIMCO Edit 5.10.64
- Updated NC-Base client.
CIMCO DNC-Max 5.10.64
- Added option not export files to the NC-Base received with specific auto receive sets. Ref: Port/Configure Port/Auto Receive/Set/NC-Base/ Do not export received file to NC-Base
Changes since previous version:
CIMCO Edit 5.10.63
- Updated OEM interface.
- Updated NC-Base client.
CIMCO DNC-Max 5.10.63
- Fixed problem renaming read-only backups.
Changes since previous version:
CIMCO Edit 5.10.62
- Added option not to copy associated files when copying a program in NC-Base. Ref: Database/Setup/Server Settings/Advanced/Do not copy associated files on copy
- Changed NC-Base program copy to prompt before copying/linking associated files.
- Added support for deleting multiple backups from the NC-Base restore dialog.
- Changed maximum number of NC-Base backups to 1000000.
- Updated CNC-Calc (Maho)
- Updated Back plot (Maho)
- Fixed problem when moving NC-Base base directory, and one or more files were waiting on the import queue.
CIMCO DNC-Max 5.10.62
- Added option to exclude directories in the directory monitor protocol. Ref: Port/Configure Port/Exclude Directories
- Added option to specify which directories should be used for auto receive and remote requests in the directory monitor protocol. Ref: Port/Configure Port/Auto Recv./Rem.Req. Dirs.
- Added option to specify the file update delay in the directory monitor protocol. Ref: Port/Configure Port/Advanced/File update delay (secs)
- Added support for detecting offline directories in the directory monitor protocol.
- Changed protocol configuration to remember last setup page.
- Changed directory monitor protocol to log file as 'File updated' when file already existed.
- Changed maximum number of NC-Base backups to 1000000.
- Fixed problem with the directory monitor protocol not updating the 'Received Files' count on the server main window.
- Fixed problem with incorrect 'file deleted' messages when a directory was offline in the directory monitor protocol.
Changes since previous version:
CIMCO Edit 5.10.61
- Added NC-Base 'Family of parts' option. Ref: Database/Setup/Server Settings/Advanced/Enable 'Family of parts'
- Updated back plot.
- Fixed problem with the NC-Base status changed to updated when auto receiving a file that was identical to the previous version.
CIMCO DNC-Max 5.10.61
- Fixed problem with NC-Base link being disabled after activating the 'Enable NC-Base debug logging' option.
- Fixed problem with the NC-Base status changed to updated when auto receiving a file that was identical to the previous version.
Changes since previous version:
CIMCO Edit 5.10.60
- Fixed problem exporting files to NC-Base. (Introduced in 5.10.57)
CIMCO DNC-Max 5.10.60
- Fixed problem exporting files to NC-Base. (Introduced in 5.10.57)
Changes since previous version:
CIMCO Edit 5.10.59
- Added option to not increment the version number when adding an NC-Base change comment. Ref: Database/Setup/Server Settings/Logging/ No new version when adding comment
- Fixed problem adding new pre-defined change comment in NC-Base.
- Fixed problem with NC-Base not prompting for a change comment when editing the program file.
- Fixed problem setting NC-Base version numbers when auto importing associated files.
CIMCO DNC-Max 5.10.59
- Fixed problem setting NC-Base version numbers when auto importing associated files.
Changes since previous version:
CIMCO Edit 5.10.58
- Changed NC-Base to always set the read only attribute on associated when opening external files in read-only mode.
CIMCO DNC-Max 5.10.58
- Added an 'Ignore following' option to the DPRNT setup. Ref: Port/Configure Port/Messaging/DPRNT Messages/Ignore following
- Added a 'Strip data' option to the DPRNT setup. Ref: Port/Configure Port/Messaging/DPRNT Messages/Strip data
- Added option to scan the filename in individual auto receive sets in the directory monitor protocol. Ref: Port/Configure Port/Auto Receive/Set/Filename/Scan filename
- Fixed problem setting the DPRNT messaging option 'Ignore data after bytes received' to more than 100.
Changes since previous version:
CIMCO Edit 5.10.57
- Added support for running an external command before opening a file.
- Fixed NC-Base crash when editing program information etc.
CIMCO DNC-Max 5.10.57
- Updated the FAPT protocol to store the program comment in the Windows Explorer title column.
- Fixed crash in the directory monitor when specifying scan interval 0 and using the 'Re-scan on startup' option.
- Fixed crash when printing and exporting file to NC-Base.
Changes since previous version:
CIMCO DNC-Max 5.10.56
- Added support for using the 'Send files in database only' and 'Send unlocked programs only' option when remote requesting files using the directory monitor protocol.
- Updated support for transferring log files in the Heidenhain FE protocol.
- Fixed problem manually receiving files in the Mazak protocol.
Changes since previous version:
CIMCO DNC-Max 5.10.55
- Added option to only compare data between the start and end trigger when comparing the existing and the received file. Ref: Port/Configure Port/Auto Receive/Set/Filename/ Compare using start/end triggers
CIMCO Software 5.10.54 Released: 20-07-06Changes since previous version:
CIMCO Edit 5.10.54
- Internal release.
CIMCO DNC-Max 5.10.54
- Internal release.
Changes since previous version:
CIMCO Edit 5.10.53
- Updated CNC-Calc.
- Added option to move program file to the machine directory when copying NC-Base program to a different machine group and 'Allow files outside ...' was enabled.
- Added option to make a new copy of the Setup/Tool/Memo files when using the NC-Base copy program function. Ref: Database/Setup/Server Settings/Advanced/ New Setup / Tool / Memo file on copy
- Fixed problem with NC-Base setting name of associated setup/memo/tool file to the default value when updating file.
- Fixed problem starting NC-Base server on some Windows 2003 systems.
CIMCO DNC-Max 5.10.53
- Added option to skip part of the transmitted file. Ref: Port/Configure Port/Transmit/Skip Data
- Added option to use the extension of the incoming file when auto receiving programs with the directory monitor protocol. Ref: Port/Configure Port/Auto Receive/Set/Filename/Extension Handling/ Use original filename extension
- Fixed problem starting NC-Base server on some Windows 2003 systems.
Changes since previous version:
CIMCO Edit 5.10.52
- Added option to extract NC-Base program information spanning multiple lines. Ref: Database/Setup/Machine/Program Format/Extract From : Multi Line
- Updated OEM interface.
CIMCO DNC-Max 5.10.52
- Added option to extract NC-Base program information spanning multiple lines. Ref: Database/Setup/Machine/Program Format/Extract From : Multi Line
Changes since previous version:
CIMCO Edit 5.10.51
- Updated back plot.
CIMCO DNC-Max 5.10.51
- Fixed problem sending program numbers less than 100000000 in the NCE280 protocol.
Changes since previous version:
CIMCO Edit 5.10.50
- Updated back plot.
- Removed message box when running external commands.
CIMCO DNC-Max 5.10.50
- Added two more Esab protocols.
- Fixed problem using the same directory for remote request and auto receive in the directory monitor protocol.
- Fixed problem with remote print requests when Word/Excel/PDF/RTF printing failed.
- Fixed problem with the pin monitor 'Minimum cycle time' option.
- Fixed problem saving Mazak T2 files (introduced in 5.10.33).
Changes since previous version:
CIMCO Edit 5.10.49
- Fixed problem with incorrect page count when printing in raw format.
CIMCO DNC-Max 5.10.49
- Added support for remote requesting print of NC-Base memo/tool/setup files in Word/Excel/PDF/RTF format.
- Added support for directory listings in the Esab Plasma cutter protocol.
- Changed the standard protocol to ignore XOff characters received while waiting for XOn when using the 'Remove from queue on XOn' option.
Changes since previous version:
CIMCO Edit 5.10.48
- Added Okuma protocol.
CIMCO DNC-Max 5.10.48
- Fixed problem with the DNC-Max OEM link.
Changes since previous version:
CIMCO Edit 5.10.47
- Improved CNC-Calc turning support.
- Fixed problem generating NC-Base tool list for some files.
- Fixed problem using the compare function on the NC-Base restore dialog when 'Allow restore all' was enabled.
CIMCO DNC-Max 5.10.47
- Fixed problem generating NC-Base tool list for some files.
Changes since previous version:
CIMCO DNC-Max 5.10.46
- Added option to clear the port file queue using DNCMaxCtrl.exe.
- Fixed problem with prompting for the user password when sending files using Drag'n'Drop.
Changes since previous version:
CIMCO Edit 5.10.45
- Added option in NC-Base to allow users to restore the NC program and all associated documents in one operation. Ref: Database/Setup/Server Settings/Advanced/Allow 'Restore All'
CIMCO DNC-Max 5.10.45
- Added option to save file in $INCOMING when it is different from the existing file. Ref: Port/Configure Port/Auto Receive/Set/Filename/Replace mode/ Save in $INCOMING Ref: Port/Configure Port/Auto Receive/Set/Filename/Replace mode/ Save in $INCOMING (Ignore formatting)
- Added option in NC-Base to allow users to restore the NC program and all associated documents in one operation. Ref: Database/Setup/Server Settings/Advanced/Allow 'Restore All'
Changes since previous version:
CIMCO DNC-Max 5.10.41
- Added option to process defined messages with DPRNT only. Ref: Setup/Configure Server/Events Messages/Only use with DPRNT messages.
- Fixed problem with the 'Ignore data after bytes received' DPRNT message option.
- Fixed 'Received message ignored' message when using DPRNT style messages.
Changes since previous version:
CIMCO Edit 5.10.40
- Updated NC-Base.
CIMCO DNC-Max 5.10.40
- Updated OEM link.
- Fixed problem with setting the version number on some Agie files.
Changes since previous version:
CIMCO Edit 5.10.39
- Updated NC-Base.
CIMCO DNC-Max 5.10.39
- Added option in the Agie protocol to auto adjust .SBR files. Ref: Port/Configure Port/Serial Port/Auto adjust .SBR files
Changes since previous version:
CIMCO Edit 5.10.38
- Updated NC-Base.
CIMCO DNC-Max 5.10.38
- Updated NC-Base
CIMCO Software 5.10.37 Released: 17-05-06Changes since previous version:
CIMCO Edit 5.10.37
- Updated CNC-Calc.
- Fixed problem generating NC-Base tool list for some files.
CIMCO DNC-Max 5.10.37
- Fixed problem generating NC-Base tool list for some files.
Changes since previous version:
CIMCO Edit 5.10.36
- Updated back plot. Notice: NC-Base updated - All NC-Base clients must be updated.
CIMCO DNC-Max 5.10.36
- Fixed problem using the serial booster option and transmit translators at the same time. Notice: NC-Base updated - All NC-Base clients must be updated. NC-Base: 5.00.07
Changes since previous version:
CIMCO Edit 5.10.35
- Updated OEM interface.
Changes since previous version:
CIMCO Edit 5.10.34
- Updated OEM interface.
- Updated back plot.
- Fixed problem with some drill types in the solid simulation.
CIMCO DNC-Max 5.10.34
- Added support for better handling of probe data. Ref: Port/Configure Port/Auto Receive/Set/Other/Probe data
- Added menu item to the recent file drop down, to clear selected file on the Mazak manual tab.
Changes since previous version:
CIMCO Edit 5.10.33
- Updated CNC-Calc.
CIMCO DNC-Max 5.10.33
- Added option to save received messages. Ref: Setup/Configure Server/Events / Messages/Save File
- Added support for specifying additional parameter filenames in the Mazak protocol. Ref: Setup/Configure Port/File Types
- Fixed problem with the recent list on the Mazak send/receive tab.
- Fixed problem receiving Mazak Mazatrol maintenance parameters.
Changes since previous version:
CIMCO Edit 5.10.32
- Updated back plot.
- Updated CNC-Calc.
- Updated NC-Base tool list generator.
- Fixed problem with files sometimes set to read-only when using the 'Update files when updating program info' option.
- Fixed problem with temp files (~CC*.TMP) sometimes created in the machine directories when using the 'Update files when updating program info' option.
CIMCO DNC-Max 5.10.32
- Fixed problem using the 'Remote Send File' option from NC-Base with the Heidenhain and Deckel LSV-2 protocols.
- Fixed problem exporting files received with the Heidenhain and Deckel LSV-2 protocols to NC-Base.
- Fixed problem sending files containing blank lines at the start of the file in the Deckel Dialog 4/11 protocol.
Changes since previous version:
CIMCO Edit 5.10.31
- Fixed problem opening multiple files from Windows Explorer.
CIMCO DNC-Max 5.10.31
- Added option to search recursively for the requested directory when using remote requests with a directory specifier. Ref: Setup/Configure Port/Remote Path/Set/Path/ Recursive search for directory Ref: Setup/Configure Port/Remote Path/Set/Path/ Recursive search for file
Changes since previous version:
CIMCO Edit 5.10.30
- Updated back plot.
- Updated CNC-Calc.
- Fixed problem printing file compare when the two files were identical.
CIMCO DNC-Max 5.10.30
- Updated OEM Link.
Changes since previous version:
CIMCO Edit 5.10.29
- Added CNC-Calc high speed pocket.
- Fixed problem specifying NC-Base server name.
- Fixed crash in License Key Manager.
CIMCO DNC-Max 5.10.29
- Improved client connection speed when connecting to servers with +100 ports.
- Fixed problem receiving programs when server had been running for a "long time".
- Fixed client crash when using the global change option.
- Fixed crash in License Key Manager.
Changes since previous version:
CIMCO Edit 5.10.28
- Added option to keep specified number of decimals when inserting macro value.
- Updated back plot.
- Fixed problem inserting some macro values.
Changes since previous version:
CIMCO Edit 5.10.27
- Added support for switching between multiple NC-Base servers.
- Updated back plot.
- Updated NC-Base tool list generator.
- Fixed problem disabling the advanced simulation option.
- Fixed problem creating MS SQL database. Notice: DNC-Max and NC-Base updated, clients needs to be updated.
CIMCO DNC-Max 5.10.27
- Added support for using CTS/DSR/DCD/RLSD as input to generate messages. Ref: Setup/Configure Port/Messaging/CTS Monitor / DSR Monitor / ...
- Fixed problem with then file dialog 'Edit' button.
- Fixed problem creating MS SQL database. Notice: DNC-Max and NC-Base updated, clients needs to be updated. NC-Base: 5.00.06
Changes since previous version:
CIMCO Edit 5.10.26
- Updated back plot.
- Updated CNC-Calc.
- Fixed problems with incorrect angle values in the tool path statistics.
- Fixed problem with solid not loaded with some licenses.
- Fixed problem specifying the 'Max Lines' value in the NC-Base program format setup.
CIMCO DNC-Max 5.10.26
- Added option to send files stored on the client PC. Ref: Setup/Configure Client/Allow users to send 'Local Files'
- Added option to replace ignore characters in the extern sub program filename. Ref: Setup/Configure Port/External sub-programs/Filename/Replace with
- Added option to automatically create directories in the Heidenhain LSV-2 protocol. Ref: Setup/Configure Port/Port Settings/Auto create directories
- Added option to limit transfers to the $DATA directory in the Heidenhain LSV-2 protocol. Ref: Setup/Configure Port/Port Settings/Allow transfers above $DATA
- Fixed crash when using SMTP mail server authentication and no username or password specified. Notice: DNC-Max client protocol updated, clients needs to be updated.
Changes since previous version:
CIMCO Edit 5.10.25
- Updated back plot.
- Updated CNC-Calc.
CIMCO DNC-Max 5.10.25
- Updated DNC-Max OEM link.
CIMCO Software 5.10.24 Released: 16-01-06Changes since previous version:
CIMCO Edit 5.10.24
- Updated back plot.
CIMCO DNC-Max 5.10.24
- Added DNC-Max OEM link.
Changes since previous version:
CIMCO Edit 5.10.23
- Added option to export tool path statistics to a text file.
- Added true type font support in CNC-Calc.
- Fixed crash causing recently created/updated macros to be lost.
- Fixed problem with the CNC-Calc pocket generation.
CIMCO DNC-Max 5.10.23
- Added option to enable allow files with spaces in the Heidenhain FE mode protocol directory listing. Ref: Setup/Configure Port/General Options/ Allow spaces in directory listing
- Added server side protocol debug option.
Changes since previous version:
CIMCO Edit 5.10.22
- Fixed problem associating file types with NC-Base machines/groups.
CIMCO DNC-Max 5.10.22
- Added Okuma B-DNC protocol.
- Fixed problem using the binary transfer option and FAPT protocols (introduced in 5.10.19).
Changes since previous version:
CIMCO Edit 5.10.21
- Updated back plot.
- Fixed problem generating tool list when importing programs with the NC-Base database converter.
CIMCO DNC-Max 5.10.21
- Fixed problem generating tool list when importing programs with the NC-Base database converter.
Changes since previous version:
CIMCO Edit 5.10.20
- Fixed problem previewing some jpeg files in the NC-Base client.
Changes since previous version:
CIMCO Edit 5.10.19
- Fixed problems using the specified comment characters in the back plot.
CIMCO DNC-Max 5.10.19
- Fixed crash in monitor device protocol when messaging was disabled.
Changes since previous version:
CIMCO Edit 5.10.18
- Added option to disable auto refresh in the NC-Base preview window. Ref: Database/Setup/Client Settings/Disable preview auto refresh
- Updated back plot.
- Fixed crash closing editor when using NC-Base MS SQL link.
- Fixed problem with Mark/Delete range activated by inserting a ' (hyphen).
CIMCO DNC-Max 5.10.18
- Fixed crash in monitor device protocol when no ports/port conflict was specified.
- Fixed problem adding files to the NC-Base import queue (introduced in 5.10.11).
Changes since previous version:
CIMCO Edit 5.10.17
- Updated back plot.
CIMCO DNC-Max 5.10.17
- Added support for auto recovering after a server crash.
Changes since previous version:
CIMCO Edit 5.10.16
- Updated back plot.
- Fixed editor focus problem.
- Fixed problem with toolbars resetting.
CIMCO DNC-Max 5.10.16
- Added auto receive/remote request for network based controls in the directory monitor protocol.
- Added option to include directory names in directory listings. Ref: Setup/Configure Port/Directory listing/Advanced/Send directory names
Changes since previous version:
CIMCO Edit 5.10.15
- Added option to force non-modal X/Y/Z values in rotate/mirror/...
- Updated back plot.
- Updated CNC-Calc.
- Fixed problem adding NC-Base tool list in some cases.
- Fixed problem specifying back plot tool prefix.
- Fixed problem with the find next/previous tool change commands.
- Fixed problem with files opened from another program not showing up on top.
Changes since previous version:
CIMCO Edit 5.10.14
- Fixed problem with the tool path statistics not showing up on some systems.
- Fixed CNC-Calc crash.
- Fixed problem selecting output format in CNC-Calc.
Changes since previous version:
CIMCO Edit 5.10.13
- Added tool path statistics function, including machining time and extent by tool.
- Updated CNC-Calc.
- Updated back plot, including fix for problem with back plot tool/holder sizes.
Changes since previous version:
CIMCO Edit 5.10.12
- Updated NC-Base tool list generator.
- Added editor OEM interface.
- Added warning when using the 'Delete references to non-existing files' option in NC-Base.
CIMCO DNC-Max 5.10.12
- Added 'Binary Transfer' template.
- Added option to extract the filename in the Mazak protocol using an advanced trigger. Ref: Setup/Configure Port/Mazatrol transfer/ Use advanced trigger to get name Ref: Setup/Configure Port/ISO transfer/ISO Options/ Use advanced trigger to get name
- Updated server to auto resolve port conflicts with other applications.
- Fixed problem receiving Mazak ISO file when 'Save in sub-directories' was disabled.
- Fixed problem with client not listing ports on remote servers.
Changes since previous version:
CIMCO Edit 5.10.11
- Added support for creating pockets with islands in CNC-Calc.
- Added support for left/right/center/ellipsis justifying variables.
- Minor updates to the back plot.
CIMCO DNC-Max 5.10.11
- Added 'File Compare' report. Ref: Setup/Configure Port/Receive/Compare report
- Added option to add operator message to the regular port log. Ref: Setup/Configure Server/Operator Messages/Add to port log
- Added option to process DPRNT style messages. Ref: Setup/Configure Port/Messaging/DPRNT Messages
- Added option to send data before each directory listing line. Ref: Setup/Configure Port/Transmit/Directory listing/Insert before entry
- Added option to replace colon with the path delimiter in reports Ref: Setup/Configure Port/Transmit/Advanced/ Replace colon with path delimiter
- Added support for left/right/center/ellipsis justifying variables.
- Changed default layout of all reports.
- Fixed problem requesting another file while a transfer is in progress in the Mazak protocol.
- Fixed problem with the directory listing 'Send after entry' option when ! was specified.
- Fixed problem with directory listings containing . and .. on some file systems.
- Fixed problem with DNC-Max server not accepting as many clients as specified in the license key.
Changes since previous version:
CIMCO Edit 5.10.10
- Update CNC-Calc pocket.
- Fixed CNC-Calc crash.
- Fixed back plot imperial tool size problem.
CIMCO DNC-Max 5.10.10
- Fixed problem with auto receive report variables when remote printing was enabled.
Changes since previous version:
CIMCO Edit 5.10.09
- Added triggers to extract additional for the NC-Base tool list.
- Added option to select a NC code coloring scheme similar to the V4 default. Ref: Setup/File Types/Colors/Letter Colors
- Changed Insert/Remove spaces to include lines with block skip.
- Minor updates to the back plot.
- Fixed Editor crash / print crash (Introduced in 5.10.03).
CIMCO DNC-Max 5.10.09
- Fixed crash in DNC-Max (introduced in 5.10.08).
Changes since previous version:
CIMCO Edit 5.10.08
- Minor updates to the back plot.
CIMCO DNC-Max 5.10.08
- Added option to queue sub-programs/list files. Ref: Setup/Configure Port/External sub-programs/Filename/ Add programs to the transmit queue.
- Added option to name files received with multi file reception using the name generated by the highest priority set. Ref: Setup/Configure Port/Auto Receive/Set/Advanced/ Name files using highest priority set
Changes since previous version:
CIMCO Edit 5.10.07
- Added support for showing the pocket tool path in CNC-Calc.
- Added support for plotting a file from the command line.
- Added support for Fanuc lathe cycles in the back plot.
- Added support for specifying size of recent lists.
- Fixed problem closing the editor in some cases when the NC-Base client was loaded.
CIMCO DNC-Max 5.10.07
- Added NC-Base debugging option. Ref: Setup/Configure Server/NC-Base/Enable NC-Base debug logging
- Added shutdown progress information to the service manager.
Changes since previous version:
CIMCO Edit 5.10.06
- Added option to execute an external command from within the editor.
CIMCO DNC-Max 5.10.06
- Fixed problem ignoring start/end triggers inside comment when 'Save until trigger' or 'Save including trigger' was not selected.
- Fixed problem loading the BTR firmware in the Shape protocol.
Changes since previous version:
CIMCO Edit 5.10.05
- Added pocket operation to CNC-Calc
- Minor updates and fixes to the back plot.
CIMCO DNC-Max 5.10.05
- Fixed problem with the Esab plasma protocol.
Changes since previous version:
CIMCO Edit 5.10.04
- Minor updates and fixes to the back plot.
CIMCO DNC-Max 5.10.04
- Fixed problem with the Messer plasma protocol.
Changes since previous version:
CIMCO Edit 5.10.03
- Added option to run database integrity check from the NC-Base backup service.
- Added support for automatically moving machine(group) base directories.
- Improved listing of Mazatrol file contents in the NC-Base preview.
- Fixed problem specifying colors for individual letters.
- Minor updates and fixes to the back plot.
CIMCO DNC-Max 5.10.03
- Added option to request files using a list file lookup. Ref: Setup/Configure Port/Remote request/Multi Request/Set/ Lookup request in a list file
- Added option to run database integrity check from the NC-Base backup service.
- Added support for automatically moving machine(group) base directories.
- Improved listing of Mazatrol file contents in the file dialog preview.
- Fixed problem specifying auto import scan interval.
- Fixed problem auto importing files without extensions when * was specified as auto import extension.
Changes since previous version:
CIMCO Edit 5.10.02
- Added option to save settings for all user in the same location or separately. Ref: Setup/Global Setup/Share settings between all users
- Minor updates and fixes to the back plot.
CIMCO DNC-Max 5.10.02
- Added option to save client settings for all user in the same location or separately. Ref: Setup/Configure Client/Share settings between all users
- Fixed problem sending files containing control characters in the Fagor 80xx protocols.
Changes since previous version:
CIMCO Edit 5.10.01
- Added new back plot with 5-Axis and solid simulation.
- Changed editor to leave block marking after a block operation.
CIMCO DNC-Max 5.10.01
- Fixed license server connect problem.
Changes since previous version:
CIMCO Edit 5.02.35
- Fixed problem with file compare when both files changed outside the editor.
CIMCO DNC-Max 5.02.35
- Fixed problem reading some Mazatrol files containing ISO data.
Changes since previous version:
CIMCO DNC-Max 5.02.34
- Added support for reading additional Mazatrol formats.
Changes since previous version:
CIMCO Edit 5.02.33
- Updated CNC-Calc.
CIMCO DNC-Max 5.02.33
- Added 2 plasma cutter protocols (Messer Esab / Shape).
- Fixed problem sending blank lines at the end of a file in some cases.
Changes since previous version:
CIMCO Edit 5.02.32
- Fixed problem with DTR not set when using hardware handshake.
CIMCO DNC-Max 5.02.32
- Added option to ignore files smaller than specified size per auto receive set. Ref: Setup/Configure Port/Auto receive/Advanced/Ignore files smaller than
Changes since previous version:
CIMCO Edit 5.02.31
- Fixed problem with editor also opening executable when opening files in some cases.
Changes since previous version:
CIMCO Edit 5.02.30
- Added option to leave associated files in place and delete only the reference when deleting a file. Ref: Database/Setup/Server Settings/Delete assoc. leaves file Ref: Database/Setup/Server Settings/Delete assoc. prompt to leave file
- Updated CNC-Calc DXF reader.
- Updated NC-Base tool list generator.
- Fixed problem using normal search after searching for a macro.
CIMCO DNC-Max 5.02.30
- NC-Base update.
Changes since previous version:
CIMCO Edit 5.02.29
- Updated CNC-Calc.
CIMCO DNC-Max 5.02.29
- Added option to send files with different port settings. Ref: Setup/Configure Port/Transmit/Send port settings
- Fixed problem using auto receive/remote request program/file name translators.
- Fixed problem with the Hyperterm protocol.
Changes since previous version:
CIMCO Edit 5.02.28
- Added option to never prompt to copy/move files to the program directory. Ref: Database/Setup/Client Settings/Never copy/move files to program dir.
- Fixed problem associating files already in the database using Drag'n'Drop.
CIMCO DNC-Max 5.02.28
- NC-Base update.
Changes since previous version:
CIMCO DNC-Max 5.02.27
- Added Messer plasma cutter protocol.
- Added Hyperterm plasma cutter protocol.
- Fixed problem sending some files with the Hurco protocol.
Changes since previous version:
CIMCO Edit 5.02.26
- Added support for specifying the template to use on the command line. Example: Edit.exe /t ISO Mill "File Name"
- Added support for entering the directory name on the 'Select Directory' dialogs.
CIMCO DNC-Max 5.02.26
- Added support for using the 'Auto select received file' option in the Mazak protocol when using the NC-Base import queue.
- Added support for entering the directory name on the 'Select Directory' dialogs.
- Fixed problem remote requesting files with the FAPT protocol.
Changes since previous version:
CIMCO Edit 5.02.25
- Added option to change NC-Base extensions. Ref: Database/Setup/Machines/Advanced/Change Extension
- Fixed problem extracting NC-Base information from the filename when auto importing.
CIMCO DNC-Max 5.02.25
- Fixed problem extracting NC-Base information from the filename when auto importing.
- Fixed problem starting server when NC-Base link was active.
Changes since previous version:
CIMCO Edit 5.02.24
- Added generic NC-Base import utility (NCBaseConvert.exe)
- Fixed crashes in CNC-Calc.
CIMCO DNC-Max 5.02.24
- Added generic NC-Base import utility (NCBaseConvert.exe)
- Fixed problem auto importing some files.
Changes since previous version:
CIMCO DNC-Max 5.02.23
- Update DNC-Max server to detect offline ports quicker when using the 'Ping device' feature.
Changes since previous version:
CIMCO Edit 5.02.22
- Changed NC-Base to leave new files open after adding it to the database.
CIMCO DNC-Max 5.02.22
- Added client communication trace option.
Changes since previous version:
CIMCO Edit 5.02.21
- Fixed problem starting the editor from some programs.
- Fixed problem when configuration files contains ASCII 0's
- Fixed problem adding new programs to the database. (Introduced in 5.02.20)
- Fixed problem detecting database upgrades.
CIMCO DNC-Max 5.02.21
- Fixed problem when configuration files contains ASCII 0's
- Fixed crash when using the auto import debug feature.
- Fixed problem detecting database upgrades.
Changes since previous version:
CIMCO Edit 5.02.20
- Added support for using the file/path name as input to the NC-Base 'Program Format' triggers.
- Added support for extracting comments from Mazatrol programs and use it as input to the NC-Base 'Program Format' triggers.
- Added right click context menu to tabs.
- Added support for restoring backups from older database versions.
- Added 'DNC Port' column to the NC-Base program list, showing the port that received the program.
- Updated NC-Base link to include name of port that received file in the log.
- Fixed problem with the macro option 'Insert with sign' when 0 was specified.
- Fixed problem with database integrity check deleting files waiting on the import queue.
- Fixed problem when adding files twice from the editor and the leave file option was disabled.
- Fixed problem with NC-Assistant updating wrong values.
- Fixed problem using advanced triggers as start trigger, end trigger and ignore trigger in the NC-Base program format setup.
- Fixed problem enabling the DNC-Max client plug-in. Notice: NC-Base and License server updated, all clients and servers must be upgraded!
CIMCO DNC-Max 5.02.20
- Added support for using the file/path name as input to the NC-Base 'Program Format' triggers.
- Added support for extracting comments from Mazatrol programs and use it as input to the NC-Base 'Program Format' triggers.
- Added support for backing up/restoring the server configuration from the client.
- Updated NC-Base link to include name of port that received file in the log. Notice: NC-Base and License server updated, all clients and servers must be upgraded! NC-Base: 5.00.05
Changes since previous version:
CIMCO Edit 5.02.19
- Changed NC-Base client to automatically shutdown editor after database restore.
- Fixed hang when adding macro parameters by copying macro definition from another macro.
- Fixed problem with files "getting stuck" when user deleted a program programs on the import queue without rejecting it first.
- Fixed problem with the option 'Notify only when program has focus'.
- Fixed problem restoring database backups when notify option was enabled.
- Fixed problem with NC-Base program format triggers when triggers for empty NC-Base fields were enabled.
CIMCO DNC-Max 5.02.19
- Fixed problem adding received files to the NC-Base import queue.
- Fixed problem with files "getting stuck" when user deleted a program programs on the import queue without rejecting it first.
Changes since previous version:
CIMCO Edit 5.02.18
- Added tool compensation to CNC-Calc.
- Added support for specifying # in macros, using ## or \#
- Fixed problem using 'Insert Block Skips' when no block skip character was specified.
CIMCO DNC-Max 5.02.18
- Change Agie protocol to automatically create missing .ISR files.
- Fixed auto receive problem.
Changes since previous version:
CIMCO Edit 5.02.17
- Added option to hide NC-Assistant 'Balloons'.
- Added option to automatically update database information when editing NC-File. Ref: Database/Setup/Server Settings/Advanced/ Update program info when editing files
- Added option to automatically update NC-File when updating database information. Ref: Database/Setup/Server Settings/Advanced/ Update files when updating program info Ref: Database/Setup/Machines/Advanced/Do not update info in file
- Added option to manually update database information from NC-File. (Right click on program and select: 'Update program info from file'). Ref: Database/Setup/Client Settings/Advanced/ Show 'Update program info from file'
- Added option to manually update database information from NC-File. (Right click on program and select: 'Update file with program info'). Ref: Database/Setup/Client Settings/Advanced/ Show 'Update file with program info'
- Improved function to insert machine monitoring macros.
CIMCO DNC-Max 5.02.17
- Added option to include extension when using the filename as the program name when exporting programs to NC-Base. Ref: Setup/Configure Port/NC-Base Settings/ Include extension in program name
- Fixed problem using ! to escape block number in reports.
- Fixed problem specifying 0 lines auto receive look ahead.
- Fixed DNC-Max crash.
Changes since previous version:
CIMCO Edit 5.02.16
- Fixed crash when closing file, closing editor or printing.
CIMCO DNC-Max 5.02.16
- CIMCO Edit update.
Changes since previous version:
CIMCO Edit 5.02.15
- Fixed problem with missing button on back plot toolbar (introduced in 5.02.14).
- Fixed crash when closing file compare (introduced in 5.02.13).
CIMCO DNC-Max 5.02.15
- Added option to ensure a linefeed is send after the last line. Ref: Port/Configure Port/Transmit/Advanced/Always send linefeed after last line
- Added option to not apply transmit translators to feed data. Ref: Port/Configure Port/Transmit/'Feed'/No translation of feed data
- Added new protocol template that handles % characters correctly for most control types. Ref: 'Generic Serial Template - Handle % characters'
- Added option to wait for an XOn, on lines matching a trigger. Ref: Port/Configure Port/Transmit/Advanced/Wait for XOn trigger.
- Added option to expand sub-program only in files matching a list of extensions. Ref: Port/Configure Port/External Sub-programs/Filename/List file extensions(s)
- Fixed problem with the 'Global Change' option when feed data etc. started/ended with a space.
- Fixed problem with the 'Global Change' option not enabled for new ports without restarting the server.
Changes since previous version:
CIMCO Edit 5.02.14
- Added option to un-lock NC-Base programs when marked as 'Ready'
- Added option to set NC-Base programs read-only when marked as 'Ready'
- Fixed problem changing NC-Base program status to 'Updated' after setting to read-write by editing program.
- Fixed problem with un-install removing some configuration information.
- Fixed crash when using Translate/Rotate/Offset.
CIMCO DNC-Max 5.02.14
- Fixed problem using transmit translators without line feeds when 'Omit empty lines' was active.
- Fixed problem with the auto filename completion in the file dialog.
- Fixed problem saving port configuration comments.
Changes since previous version:
CIMCO Edit 5.02.13
- Added option to insert machine monitoring macros.
- Fixed problem starting the editor from some programs.
CIMCO DNC-Max 5.02.13
- Fixed problem with DNC-Max clearing fields in the NC-Base when no information was specified in the received NC program.
Changes since previous version:
CIMCO Edit 5.02.12
- Added support for handling UNICODE files.
- Fixed problem importing machine types from V4.
- Fixed problem using 'Save All'/'Close All' with CNC-Calc.
CIMCO DNC-Max 5.02.12
- Added option to auto receive/remote request ISO files from the current disk directory in the Mazak protocol. Ref: Port/Configure Port/ISO Transfer/Look for ISO programs in disk dir. Ref: Port/Configure Port/ISO Transfer/Save ISO programs in disk dir.
- Added option specify a sub-directory when auto receiving files in the Mazak protocol. Ref: Port/Configure Port/ISO Transfer/Save in sub-directories
- Fixed problem selecting some network resources in the file and directory dialogs.
Changes since previous version:
CIMCO Edit 5.02.11
- Added support for manually receiving new programs into NC-Base.
- Added 'Copy Files' menu to copy files to Floppy/Desktop/Removable drives from NC-Base.
- Added warning message when loading lines longer than 1024 characters.
- Changed NC-Base client to log only changes when file is saved.
- Improved NC-Base versioning information.
- Improved NC-Base version data when upgrading from V4.
- Fixed problem printing in landscape mode.
- Fixed problem sorting by custom fields in NC-Base.
- Fixed problem with no search results showing up until header was clicked.
CIMCO DNC-Max 5.02.11
- Updated file dialog to show preview when connected to a remote server, automatically suggest filenames etc.
- Added support for transferring file header from files with a different extension.
- Fixed problem with terminal/monitor ports showing up in the NC-Base port list.
Changes since previous version:
CIMCO Edit 5.02.10
- Added support for closing window by clicking middle mouse button/wheel on tab bar.
- Added DNC-Max server name to NC-Base machine group port list.
- Added support for changing Drag'n'Drop between cut and copy after drag started using CTRL key.
- Updated NC-Base link to log only program information that has been changed.
- Fixed problem with decimal character on numeric keypad using some keyboard mappings.
CIMCO DNC-Max 5.02.10
- Ports are now restarted when they are renamed.
- Updated NC-Base link to log only program information that has been changed.
- Added 'Select All'/'Select None' buttons to select servers dialog.
- Added option to specify how long ports should be marked in red after an error occurred. Ref: Setup/Configure Client/Port List/Reset errors after (secs)
- Fixed problem reporting auto received programs without a program name.
- Fixed problem with some DCON units loosing the connection.
Changes since previous version:
CIMCO Edit 5.02.09
- Fixed problem with NC-Base loosing passwords.
CIMCO DNC-Max 5.02.09
- Fixed problem adding handheld terminals and machine monitor modules.
Changes since previous version:
CIMCO Edit 5.02.08
- Added support for generating letters in the CNC-Calc.
CIMCO DNC-Max 5.02.08
- Added option to allow backups to be stored in the same directory as the original, or in a sub-directory of the original file.
- Added support for using variables in backup directory names.
- Added option in the Mazak protocol to create an alarm on the control when a remote request fails. Ref: Port/Configure Port/Mazatrol Transfer/Advanced/No file selected if request fails
CIMCO Software 5.02.07 Released: 18-04-05Changes since previous version:
CIMCO DNC-Max 5.02.07
- Enabled serial booster in the Mazak protocol.
Changes since previous version:
CIMCO Edit 5.02.06
- DNC-Max update. Notice: DNC-Max client protocol updated, clients needs to be updated.
CIMCO DNC-Max 5.02.06
- Added 'Global Change' option. Ref: Setup/Configure Server/Port Settings/Allow global changes
- Added 'Fast Port Start' option. Ref: Setup/Configure Server/Port Settings/Enable fast port start
- Added option to start client with port groups collapsed. Ref: Setup/Configure Client/Port List/Collapse port groups on startup Notice: DNC-Max client protocol updated, clients needs to be updated.
Changes since previous version:
CIMCO Edit 5.02.05
- Fixed back plot crash.
CIMCO DNC-Max 5.02.05
- Added support for directory listings in the OSAI 86xx protocol.
Changes since previous version:
CIMCO Edit 5.02.04
- Updated CNC-Calc.
CIMCO DNC-Max 5.02.04
- Added support for remote request and auto receive in the Fagor 801x/802x/803x protocol.
Changes since previous version:
CIMCO Edit 5.02.03
- Fixed installation problem.
CIMCO DNC-Max 5.02.03
- Changed ports to auto start when manually sending a file from a disabled / stopped port.
Changes since previous version:
CIMCO Edit 5.02.02
- Updated CNC-Calc.
CIMCO DNC-Max 5.02.02
- Fixed problem sending from line/block/tool (introduced in 5.01.21).
Changes since previous version:
CIMCO Edit 5.02.01
- First public release.
CIMCO DNC-Max 5.02.01
- First public release.
CIMCO Software 5.01.21 Released: 05-04-05Changes since previous version:
CIMCO Edit 5.01.21
- Updated CNC-Calc.
CIMCO DNC-Max 5.01.21
- Fixed problem creating some directories in the directory selector.
- Fixed problem sending from line/block/tool when using the sub-program expand function.
- Fixed problem using operator messages without a program name.
CIMCO Software 5.01.20 Released: 28-03-05Changes since previous version:
CIMCO Edit 5.01.20
- Fixed problem finding some macros.
- Fixed crash when closing the editor.
- Fixed crash in CNC-Calc.
- Fixed problem with machine zero in CNC-Calc.
CIMCO DNC-Max 5.01.20
- Minor speedup when using protocols with some serial device servers.
- Change some default values.
CIMCO Software 5.01.19 Released: 21-03-05Changes since previous version:
CIMCO Edit 5.01.19
- Updated CNC-Calc.
CIMCO DNC-Max 5.01.19
- Fixed problem with the e-mail notifications.
CIMCO Software 5.01.18 Released: 16-03-05Changes since previous version:
CIMCO DNC-Max 5.01.18
- Fixed crash in the DNC-Max client.
CIMCO Software 5.01.17 Released: 14-03-05Changes since previous version:
CIMCO DNC-Max 5.01.17
- Added log message when starting ports if DNC-Max is installed as a service.
- Fixed problem with clients not connection when installing DNC-Max as a service.
- Fixed problem with showing filenames in the web monitor log.
- Fixed problem un-locking server console after auto lockup.
- Fixed problem ignoring remote request programs during multi file reception if multi request were enabled.
CIMCO Software 5.01.16 Released: 03-03-05Changes since previous version:
CIMCO Edit 5.01.16
- Added CIMCO Remote Support Program.
- Updated CNC-Calc.
- Fixed problem restoring NC-Base backups.
CIMCO DNC-Max 5.01.16
- Added CIMCO Remote Support Program.
- Fixed problem restoring NC-Base backups.
CIMCO Software 5.01.15 Released: 01-03-05Changes since previous version:
CIMCO Edit 5.01.15
- Fixed NC-Base problem (introduce in 5.01.14).
CIMCO DNC-Max 5.01.15
- Fixed NC-Base problem (introduced in 5.01.14).
CIMCO Software 5.01.14 Released: 01-03-05Changes since previous version:
CIMCO Edit 5.01.14
- Added option to print only the differences when printing a file compare.
- Added option to map numeric keypad decimal point to the specified machine decimal point.
- Added option to skip lines without block numbers when renumbering a file.
- Updated CNC-Calc to support entering values as expressions, ex. 2+1/5.
CIMCO DNC-Max 5.01.14
- Added support for receiving multiple programs in binary mode.
- Fixed incorrect print message.
CIMCO Software 5.01.13 Released: 18-02-05Changes since previous version:
CIMCO Edit 5.01.13
- Updated NC-Assistant.
- Fixed problem moving associated files between programs in NC-Base.
CIMCO DNC-Max 5.01.13
- Fixed problem sending failed reports (introduced in 5.01.12).
CIMCO Software 5.01.12 Released: 16-02-05Changes since previous version:
CIMCO Edit 5.01.12
- Fixed problem back plotting some turning cycles.
CIMCO DNC-Max 5.01.12
- Added 'Select multiple files' option to the Mazak protocol. Ref: Port/Configure Port/Mazatrol Transfer/Advanced/Select multiple files
- Added option to log failed port pings as either an error or an info message: Ref: Port/Configure Port/Serial Device/Log error when ping fails
- Added support for remote requesting another file while a transfer is in progress in the Mazak protocol.
- Fixed problem with receiving single line programs/requests.
- Fixed problem with verify reports when 'Append files received using multi file reception' was selected.
- Fixed problem when remote restarting from a tool change.
CIMCO Software 5.01.11 Released: 08-02-05Changes since previous version:
CIMCO Edit 5.01.11
- Fixed problem storing editor configurations in NC-Base.
- Fixed memory leak (introduced in 5.01.10).
CIMCO DNC-Max 5.01.11
- Fixed Server crash (Introduced in 5.01.09, not fixed in 5.01.10).
CIMCO Software 5.01.10 Released: 04-02-05Changes since previous version:
CIMCO Edit 5.01.10
- Fixed file compare problem.
- Fixed problem when purging programs awaiting approval.
- Fixed problem running CNC-Calc in demo mode.
- Fixed problem with the 'Omit lines containing' option in the DNC setup.
CIMCO DNC-Max 5.01.10
- Fixed problem when purging programs awaiting approval.
- Fixed Server crash (Introduced in 5.01.09).
CIMCO Software 5.01.09 Released: 02-02-05Changes since previous version:
CIMCO Edit 5.01.09
- Updated CNC-Calc
- Fixed problem re-loading files changed outside the editor.
CIMCO DNC-Max 5.01.09
- Added support for automatic opening of Window XP SP2 Firewall.
- Changed default temp directory to [Installdir]\DNCMax5\Temp
- Fixed client layout problem, when closing client while minimized.
CIMCO Software 5.01.08 Released: 26-01-05Changes since previous version:
CIMCO Edit 5.01.08
- Updated CNC-Calc
CIMCO DNC-Max 5.01.08
- Fixed problem with the expand sub-programs option.
- Fixed problem with the NC-Base read-only flag when receiving from DNC-Max.
CIMCO Software 5.01.07 Released: 24-01-05Changes since previous version:
CIMCO Edit 5.01.07
- Fixed problem auto importing program info from associated files, when 'Auto add memo/setup/tool files to new programs' was disabled.
- Fixed problem with file compare on some files.
- Fixed problem with 'Find Tool Change'.
CIMCO DNC-Max 5.01.07
- Added option to expand sub-programs in the standard protocol. Ref: Port/Configure Port/Transmit/Sub-program Expand
- Changed default values for Start/End of loop feed data.
- Fixed problem auto importing program info from associated files, when 'Auto add memo/setup/tool files to new programs' was disabled.
CIMCO Software 5.01.06 Released: 21-01-05Changes since previous version:
CIMCO Edit 5.01.06
- Updated CNC-Calc
CIMCO DNC-Max 5.01.06
- Fixed problem using Mazak disk mode (introduced in 5.01.03).
CIMCO Software 5.01.05 Released: 19-01-05Changes since previous version:
CIMCO Edit 5.01.05
- Fixed system crash when running Norton/Symantec.
CIMCO DNC-Max 5.01.05
- Fixed system crash when running Norton/Symantec.
CIMCO Software 5.01.04 Released: 17-01-05Changes since previous version:
CIMCO Edit 5.01.04
- NC-Base Update.
CIMCO DNC-Max 5.01.04
- Fixed crash when exporting programs from the Mazak protocol to NC-Base.
CIMCO Software 5.01.03 Released: 16-01-05Changes since previous version:
CIMCO Edit 5.01.03
- Updated CNC-Calc
- Fixed problem with the color configuration.
CIMCO DNC-Max 5.01.03
- Added 'Program Offset' function to the standard protocol.
- Fixed problem with the sub-program option in the standard protocol.
CIMCO Software 5.01.02 Released: 10-01-05Changes since previous version:
CIMCO Edit 5.01.02
- Updated NC-Base install.
CIMCO DNC-Max 5.01.02
- Updated NC-Base install.
CIMCO Software 5.01.01 Released: 10-01-05Changes since previous version:
CIMCO Edit 5.01.01
- Initial release. History
CIMCO DNC-Max 5.01.01
- Initial release. NC-Base: 5.00.04
