CIMCO Edit 2026 Veröffentlichungen

CIMCO Edit 2026.01.11 PreviewFreigegeben: 03-06-26Register to download
Änderungen gegenüber der Vorgängerversion:
CIMCO Edit 2026.01.11
  • Fix: Better robustness on Intel Integrated Graphics.
  • Fix: An issue where turret mounts would not load.
  • Fix: Reverse post: spindle axis center issue in machine coordinates.
  • Fix: Heidenhain reverse posts: wrong rotation axis movements in some cases.
  • New: Reverse post: parametrized machine subprogram macros. (S29004)
  • New: Improved stock compare performance.
  • Fix: True vision rendering stale image during animation playback.
  • Fix: Sharpened shaft/shoulder stock collision margins.
  • New: Support updated web license.
  • Fix: Siemens reverse posts: $P_ACTFRAME. (S27059)
  • Fix: Siemens reverse posts: $P_UIFR.
  • Fix: Fanuc milling reverse post: rotated work offsets G10, G30.
  • Fix: Save Setup not commenting Version Number when writing to top of NC file.
  • Fix: Fanuc/Mazak milling reverse posts: G68.4.
  • Fix: Fanuc milling reverse post: G82 dwell time.
  • Fix: Mazak and Fanuc milling reverse posts: system variables #7001-7941.
  • New: Support threading tools with low corner radius and point corners.
  • Fix: Siemens milling reverse post: G_BACK_TUNNEL.
CIMCO Edit 2026.01.10 PreviewFreigegeben: 27-05-26
Änderungen gegenüber der Vorgängerversion:
CIMCO Edit 2026.01.10
  • Fix: Fanuc milling reverse post: G68.4.
CIMCO Edit 2026.01.09 PreviewFreigegeben: 26-05-26
Änderungen gegenüber der Vorgängerversion:
CIMCO Edit 2026.01.09
  • Fix: An issue where default tool colors would be black instead of following color loop.
  • Fix: Reverse post: wrong incremental move after angular move in turning.
  • Fix: Reverse post: repeating macro program calls in some cases.
  • New: Remembers stock compare gradient setting.
  • New: Remembers True Vision.
  • New: Added simulation shortcut for going to end (Ctrl + Shift + Space).
  • New: Added simulation shortcut for playing / pausing (Ctrl + Shift + R).
  • Fix: Reverse post: inverse kinematics issue when using spindle axis.
  • Fix: Heidenhain reverse posts: issue with ignoring some cycle parameters in some cases.
  • Fix: Consistent milling tool orientation in milling and mill-turn environment. (S28130)
  • Fix: Siemens milling reverse post: POCKET2.
CIMCO Edit 2026.01.08 PreviewFreigegeben: 19-05-26
Änderungen gegenüber der Vorgängerversion:
CIMCO Edit 2026.01.08
  • Fix: Okuma reverse posts: OO88.
  • Fix: Fanuc reverse posts: G50.1, G51.1.
  • Fix: Reverse post: wrong entity by line number in some cases when using external subprograms.
  • Fix: A circumstantial freeze when closing Backplot.
  • New: Tweaked cursor when resizing sub program HUD.
  • Fix: Corrupt sub program HUD when Editing main program.
  • Fix: Visibility state not being remembered when toggling geometries from ribbon bar.
  • New: Reverse post: manual tool change position. (S28846)
  • Fix: Siemens reverse posts: added R1000-R1299 variables.
  • Fix: Reverse post: angular move issue in turning.
  • Fix: Siemens reverse posts: MSG command not outputs message into simulation window. (S28577)
  • Fix: Crash in remove chips.
  • Fix: Collision detection not refreshing after changing tool/workpiece setting.
  • Fix: Stock simulation when turning on an AC 5 axis milling machine.
  • Fix: Centroid reverse posts: conditional expressions. (S26828)
  • Fix: NC line highlight sometimes on wrong line when jumping to tool changes.
  • Fix: Siemens milling reverse post: CYCLE800 retract position.
CIMCO Edit 2026.01.07 PreviewFreigegeben: 06-05-26Register to download
Änderungen gegenüber der Vorgängerversion:
CIMCO Edit 2026.01.07
  • Fix: Centroid milling RPost: M25.
  • Fix: Siemens turning reverse post: SUPA, G53.
  • Fix: An issue where stopping conditions could would rewind/stop at before the initial play position.
  • Fix: Presentation viewer initially highlighting line 1.
  • Fix: Collision detection progress bar sometimes appearing when it shouldn't.
  • Fix: Centroid reverse posts: added #29000-31999 variables.
  • Fix: An issue where changing theme corrupted stock compare colors.
  • New: Millplus milling reverse post. (S23277)
  • New: New real-time based simulation animation speed slider.
  • Fix: Tool manager: Thread mill shape.
  • Fix: Reverse post: wrong tool rotation angles in some cases.
  • Fix: Reverse post: crash in radius compensation in some cases.
  • Fix: Black screenshot in simulation bundles.
  • New: Added gage point to custom lathe holders.
  • Fix: Fagor reverse posts: #MCS ON/OFF.
  • Fix: Heidenhain reverse posts: CYCL DEF 19.
  • Fix: Fanuc milling reverse post: system variables #2000-2399, #10001-10999, #11001-#11999, #13001-13999.
  • Fix: Arc interpolation regression.
  • Fix: Stock removal when turning with C180.
  • Fix: Fanuc turning reverse posts: #3000.
  • Fix: Fanuc turning reverse post: linear angle issue.
CIMCO Edit 2026.01.06 PreviewFreigegeben: 29-04-26Register to download
Änderungen gegenüber der Vorgängerversion:
CIMCO Edit 2026.01.06
  • Fix: Reverse post: macro programs issue.
  • Fix: Fanuc turning reverse post: drilling cycle R parameter is absolute/incremental depending on G90/G91 activated. (S28324)
  • Fix: Mazak milling reverse post: Tool length compensation activation control setting. (S28398)
  • Fix: An issue where special characters in tool comments and files names were sometimes corrupted.
  • New: Added turning sample file demonstrating stock flip and split stock.
CIMCO Edit 2026.01.05 PreviewFreigegeben: 27-04-26Register to download
Änderungen gegenüber der Vorgängerversion:
CIMCO Edit 2026.01.05
  • Fix: Mazak SmoothAi reverse posts: M98H.
  • Fix: Siemens milling reverse post: OFFN.
  • Fix: Fanuc turning reverse posts: missing variables.
  • Fix: Reverse post: radius compensation issue in mill-turn.
  • Fix: Heidenhain reverse posts: PLANE RESET STAY.
CIMCO Edit 2026.01.04 PreviewFreigegeben: 23-04-26Register to download
Änderungen gegenüber der Vorgängerversion:
CIMCO Edit 2026.01.04
  • Fix: Reverse post: spiral and conical arcs issue.
  • Fix: Mazak reverse posts: #3020 variable.
  • Fix: Fanuc turning reverse post: G73.
  • Fix: Fanuc milling reverse post: WCS Expansion option.
  • Fix: Legacy APT reverse post: MULTAX.
  • New: Collision detection between machine models and in-process stock.
  • Fix: Heidenhain reverse post: PLANE RESET TURN.
  • Fix: Siemens reverse posts: $P_TOOLL.
  • Fix: Heidenhain reverse posts: cycle 17.0 feed rate issue.
CIMCO Edit 2026.01.03 PreviewFreigegeben: 16-04-26Register to download
Änderungen gegenüber der Vorgängerversion:
CIMCO Edit 2026.01.03
  • Fix: Fixed unlocalized file type template names in 'Add new file type' dialog. (S28405)
  • Fix: Fanuc Turning STARGB reverse post extension: G910, G69.1.
  • Fix: Missing control settings localization in Haas and Mitsubishi turning reverse posts. (S28236)
  • Fix: Reverse post: G10L2P0.
  • Fix: Fanuc turning reverse posts: drilling axis issue. (S28324)
  • Fix: File open dialog for DXF shows "Open STL File"
  • Fix: Reverse post: cylindrical interpolation regression.
  • Fix: Spindle to stock collision reporting issue when the spindle model was in inches.
  • Fix: False positive stock/holder collisions when turning on stock STL.
  • New: Added Clamp/unclamp time settings.
  • New: Advanced Chuck Jaw setup.
  • Fix: Okuma milling reverse post: G283/284.
  • Fix: Siemens turning reverse post: TRANSMIT_S.
  • Fix: Siemens reverse posts: G500 fix caused regression.
  • Fix: Better simulation robustness on Intel Integrated Graphics.
  • Fix: Stock compare update when changing workpiece.
  • Fix: Collision detection issues when multiple workpieces or fixtures.
  • Fix: Issue where hiding workpiece could pause simulation.
  • Fix: Toolpath vectors only showing for half the toolpath.
  • Fix: A circumstantial freeze when closing Backplot.
  • Fix: Reverse post: diameter programming issue for variables.
  • Fix: Centroid milling reverse post: M98, M25.
  • Fix: Centroid reverse post: system variables support. (S26828)
  • Fix: Machine configuration.
  • New: Statistics can show graph for selected tools. (S27148)
  • New: Default view can now be changed in the machine configuration editor.
  • New: Now bundles external sub programs in simulation bundles.
  • New: Support vertical milling extenders.
CIMCO Edit 2026.01.02 PreviewFreigegeben: 23-03-26Register to download
Änderungen gegenüber der Vorgängerversion:
CIMCO Edit 2026.01.02
  • Fix: Mazak milling reverse posts: G68, G68.2.
  • Fix: Siemens reverse posts: D+SUPA command issue.
  • New: Add Keep decimals, Strip leading zeros and Strip trailing zeros options to Adjust Feedrate and Adjust Spindle Speed dialogs. (S27518)
  • Fix: Reverse post: home position units issue.
  • Fix: Stock simulation issue when C not zero.
  • Fix: arc scanning issue.
  • Fix: An issue where 'remove chips' sometimes removed the wrong piece.
  • New: Tool visibility state is now remembered.
  • Fix: Remove chips sometimes removing too much material after parting off.
  • Fix: Tool mounts missing in simulation bundles.
  • Fix: False positive collisions in turning.
  • Fix: An issue where going to end would not always update stock.
  • New: Memory optimizations.
  • New: Better STL repair for stock compare.
  • Fix: Haas milling reverse post: P9817/9818.
  • Fix: Okuma milling reverse post: VRSTT, VZOF*, fixed issue with labels.
  • Fix: Loading of stock from STL when paths contain Chinese characters.
  • Fix: Multi Channel: Fixed an issue where the configured Channel Order was not always preserved. (S28040)
  • Fix: Siemens milling reverse post: G500.
  • Fix: Mazak Integrex reverse post: M211.
  • Fix: Siemens turning reverse post: CYCLE800. (S28020)
  • Fix: Turning when work origin not on rotation axis.
  • Fix: Orientation of turning tools when turning on horizontal mills.
  • New: Automatically selects the Backplot tab when launching directly into simulation from CAM integrations.
  • Fix: Centroid milling reverse post: G43.3, G43.4 display tool position issue. (S26828)
  • Fix: Machine home position when in inches.
  • Fix: Corrupt stock when using remove chips with stock compare.
  • Fix: Reverse post: radius compensation issue.
  • Fix: NC code missing from .CimcoSimData when exporting simulation bundle.
  • New: Improved stock model collision detection.
  • Fix: Heidenhain reverse posts: M130.
CIMCO Edit 2026.01.01 PreviewFreigegeben: 09-03-26Register to download
Änderungen gegenüber der Vorgängerversion:
CIMCO Edit 2026.01.01
  • Fix: Spindle mount collision detection.
  • Fix: Spindle mount scaling when in inches.
  • Fix: Fanuc milling reverse post: G68.
  • New: Command line (--savebundle path) for saving simulation bundle.
  • Fix: Reverse post: fixed not updating some of linked variables.
  • Fix: An issue where jumping to limit over-travel would highlight NC line 0.
  • Fix: Remove chips when on sub spindle.
  • Fix: Default mounting on cross turning tools with round shank.
  • Fix: Tool colors setting not loading correctly when starting CIMCO Edit.