CIMCO Software 2025 Veröffentlichungen

ZeigenAlle Veröffentlichungen Nur Downloads

VersionshinweiseAlle erweitern Alles einklappen

CIMCO Software 2025.01.21 Freigegeben: 10-11-25Register to download

Änderungen gegenüber der Vorgängerversion:

CIMCO Software 2025.01.21

Change: Added error messages when the auto-update service fails to start.

CIMCO Edit 2025.01.21

Fix: Mazak Integrex reverse post: tool length compensation issue.
New: Added goto next/prev navigation when in animation navigation mode.
Fix: Fanuc MX turning reverse post: sub-spindle support, M68/69, M168/169.
Fix: Okuma turning reverse post: added "Decimal point data" setting.
Fix: Fixed an issue where the license installation could fail when the file path contained special or non-English characters. (S19679)

CIMCO DNC-Max 2025.01.21

Fix: Fixed an issue where pressing ESC on the keyboard could cause some UI controls to disappear in the Port Configuration dialog. (S26661)
New: Added a searchable, sortable popup for Operator Message dropdowns to make finding specific messages easier. (S26601)

CIMCO MDC-Max 2025.01.21

Fix: Web Client: Better options for header font size in historical dashboards.
New: Web Client: Added pereto chart type to historical dashboards.
New: Introduced load button when creating RT-DB tables with type timeline.
Change: Updated kiosk mode when attach and detach may generate an MDC message.
Fix: Fixed crash when adding extra Condition in Job Setup.
New: Web Client: Historical Dashboards are now printable.
Fix: Fixed issue where an incorrect operator screen was displayed after a new live screen was added in the configuration.

CIMCO NC-Base 2025.01.21

Fix: The setting "Prohibit NC-Base user credentials after associating with the external user" now works.

CIMCO Software 2025.01.20 Freigegeben: 05-11-25Register to download

Änderungen gegenüber der Vorgängerversion:

CIMCO Software 2025.01.20

Fix: Fixed an issue where the auto-update process did not start after an upgrade, causing the auto-update progress dialog to remain open. (S23843)

CIMCO Edit 2025.01.20

New: Added Cutter Allowance to the presentation viewer.
Fix: Siemens reverse post: CYCLE84.
New: Added Cutter Point Shift to Parting and Grooving tools.
Fix: An issue where the last toolpath move was not always shown.
Fix: Siemens turning reverse post: CYCLE95.
New: Units added to stock and work offsets in setup file.
Fix: Reverse post: Tool path statistics crash in some cases.
New: Select and delete multiple geometries as once in the machine builder.
New: Turret tool mount STL and tool location can now be changed in the tool manager.
Fix: A collision highlight issue.
Fix: Fagor reverse post: Program header syntax (%),
Fix: Heidenhain reverse posts: PLANE RELATIV, TCH PROBE 426.
Fix: Reverse post: radius compensation in mill-turn mode.
New: Added generic machine with angle head.
New: Added Engrave using Angle Head sample for Fanuc control.
New: Angle heads can now be added to tool assemblies.

CIMCO DNC-Max 2025.01.20

New: Web Client: Expired user passwords will now prompt a password reset in the DNC-MAX and NC-Base web clients.
New: Implemented SSH protocol for data transmission (e.g. Heidenhain TNC7). (S26659)
Change: Send directory in Split window supports now $ environment variables.
Change: Added error to log when DNC-Max service can not start due to a licensing issue. (S26675)

CIMCO MDC-Max 2025.01.20

New: Web Client: Added Historical Dashboards. See documentation: https://docs.cimco.com/en/docs/mdcmax/2025/web-client/historical-dashboards/
Fix: Fixed an issue with status screens in full-screen mode where potential desktop size changes were not taken into account. (S26405)
Change: Web Client: The web client now automatically opens the operator screen when only one machine is available, without prompting the user to select it.
Fix: Configuration warning when re-opening configuration. (S26684)
Fix: Fixed an issue where the autumn time change could cause an infinite loop in Calculating.
Change: Web Client: Operator screens now display only machines assigned to the user.

CIMCO NC-Base 2025.01.20

Fix: Fixed adding weblink not prompting for reason if configured to.

CIMCO Software Manager 2025.01.20

Fix: Added log messages for when the temporary license is expired.

CIMCO Software 2025.01.19 Freigegeben: 27-10-25Register to download

Änderungen gegenüber der Vorgängerversion:

CIMCO Edit 2025.01.19

Fix: Fanuc turning reverse post: M32/33.
Fix: Fagor reverse post: M8, G51.
Fix: Heidenhain milling reverse posts: cycle 332.
Fix: Reverse post: modal subprogram variable watch list. (S26611)
Fix: Okuma milling reverse post: G605. (S26453)
Fix: An issue where holder length could get out of sync with segments.
New: Added show active plane and show current navigation to animation mode.
Fix: Reverse post: radius compensation in mill-turn mode.
Fix: A thread milling tool profile issue.
New: Now shows tool name in simulation.
Fix: Reverse post: Map letters now support escaping '=' and ',' by using \= and \,
Fix: Fagor turning reverse post: G81.
Fix: An issue where gage point incorrectly converted from inches to metric.
New: Centroid turning reverse post. (S23086)
Fix: Heidenhain reverse posts: FU command. (S26355)
Fix: Fixed an issue where the total page count in the footer was incorrect when printing File Compare windows. (S26535)

CIMCO DNC-Max 2025.01.19

Fix: Directory Monitor zip now handles special characters correctly.
Fix: Web Client: Permissions now take effect in the web client.

CIMCO MDC-Max 2025.01.19

Change: Added an information if the monitorlog queue is inaccessible due to a deadlock.
New: Added a filter to operator screens setup.
Fix: Fixed an issue where non-ASCII characters were not properly saved in the JSON HW-outputs configuration file.
Fix: Web client: Fixed issue where the header would occasionally overlap the page content in Chrome.
Fix: Fixed issue with MDC notifications sent via HTTP when they are not converted to UTF-8. MDC notifications JSON file is not properly stored in UTF-8. (S26594)
Fix: Web Client: Fixed an issue causing some Operator Screen button functions to not always work correctly in split screens.
Fix: Web Client: Fixed issue causing URL Logins to fail when the URL points to a slideshow.

CIMCO NC-Base 2025.01.19

Fix: Web Client: Fixed permissions for the NC-Base Web client.

CIMCO Software 2025.01.18 Freigegeben: 14-10-25Register to download

Änderungen gegenüber der Vorgängerversion:

CIMCO Edit 2025.01.18

Fix: Reverse post: degenerated moves.
Fix: Reverse post: Sub-spindle issues with wrong Z moves.
Fix: An issue where enabling stopping conditions while animating didn't work.
Fix: A false positive collision detection issue between tool shank and workpiece when drilling holes.
Fix: An issue where workpiece and fixture did not always highlight collisions.
Fix: Heidenhain reverse posts: incremental coordinates for CC command.
Fix: A machine builder issue where other table axes could not be added when there is a sub spindle.
Fix: Fixed an issue where the title of a Multi Channel window would go blank after opening and closing Editor Setup. (S26499)
Fix: Fixed a possible crash when running multiple Multi Channel views and then opening and closing Editor Setup. (S26499)
Fix: Fanuc milling reverse post: radius compensation number setting.
New: NC Code added to Presentation View.
Fix: Haas milling reverse posts: added rapid interpolation control setting (#335). (S26487)

CIMCO DNC-Max 2025.01.18

Fix: Changes made to user groups in "User Setup" are now correctly applied when configured from DNC-Max Server. (S(S26467))

CIMCO MDC-Max 2025.01.18

Change: Added an additional check to ensure that the correct data from archives is processed.
Change: The ExternIO Setup Sheet now uses wide layout.
Change: Delayed backdating is now applied also for message 'RECALCULATE'.
Fix: Fixed an issue when no data is found in DB View when OPERATOR / JOB / PROGRAM build-in tables are used and max records is set to 0 (no limit).
New: Kiosk mode now includes an option to change the MDC state background color on unattached screens.
Fix: Web Client: Resolved screen rendering issue after browser refresh for SSO-authenticated sessions.

CIMCO NC-Base 2025.01.18

New: Add option to automatically import AD users on first login without a prompt.

CIMCO Software 2025.01.17 Freigegeben: 06-10-25Register to download

Änderungen gegenüber der Vorgängerversion:

CIMCO Edit 2025.01.17

Fix: Fanuc turning reverse post: A-axis support.
Fix: Siemens reverse posts: G74/75.
Fix: Reverse post: tool change sequence with subspindle.
New: Turning stock no longer needs to be centered around the axis of revolution.
Fix: Fix problem where printing a Multi Channel view would not always work. (S26431)
Fix: Improved simulation robustness.
Fix: Reverse post: "map letters" not applying correctly in some cases.
Change: Tool manager: disabled non-unique number/id/description messages for libraries.
Fix: Mazak reverse posts: drill retraction feedrate.
Fix: Fanuc turning reverse posts: #5001-5003, AXNUM[X/Y/Z].
Fix: A tool compensation issue when gage point was selected as custom.
Fix: Reverse post: radius compensation. (S26416)
New: Heidenhain reverse post: subprogram file search setting.
Fix: Siemens milling reverse post: CYCLE81-83/85/86.
Fix: Fanuc reverse posts: M99P.
Fix: A cross section workpiece highlight issue.
New: Collision detection can now be enabled for base models.
Fix: Turning reverse posts: G107.
New: Added a new "Pause Synchronization" option to pause automatic synchronization of all channels in Multi Channel view, preventing windows from jumping while editing NC files.
New: Fanuc Turning Star reverse post extension: M36-38/56-58.
Fix: Reverse post: lathe cylindrical interpolation.
Fix: Reverse post: wrong retract moves after lathe threading in some cases.
New: Okuma milling reverse post: G605.
Fix: Fanuc turning reverse posts: G32 modality issue.
Fix: Centroid milling reverse post: variables.

CIMCO MDC-Max 2025.01.17

Fix: Web Client: Fixed issue where in some cases AD users without assigned groups could still logon but not access anything.
Fix: Fixed a crash in the MDC client triggered by double-clicking an entry in the DB View. (S26419)
Fix: Fixed a bug introduced in 2025.01.14 when yesterday s data was duplicated after midnight.
New: Added support for $ environment variables in notification recipients.
Change: Updated notification HTTP interface to continue iterating over all recipients even if some fail.
Fix: Fixed an issue where global recipients in MDC notifications were not working.
New: Implemented a new option when operators can be assigned to specific machines only.
New: Introduced a kiosk mode for operator screens in the thick MDC client.
Fix: Fixed a potential MDC client crash when a DB view is active and a search field name has no text.

CIMCO Software 2025.01.16 Freigegeben: 24-09-25Register to download

Änderungen gegenüber der Vorgängerversion:

CIMCO Edit 2025.01.16

Fix: Siemens reverse posts: CALL BLOCK.
New: Fanuc milling reverse post: added "Prefer Tilt" control setting.
Fix: Brother milling reverse post: added G28/G30 reference positions to control settings.
Fix: Fixed an issue where the default tool libraries included with Tool Manager could reset after restarting the Editor.
New: Added 4 axis tombstone sample file for various controls.
Fix: A crash when saving setup to a setup file with a very long path.
Fix: Stock from DXF axis.

CIMCO DNC-Max 2025.01.16

Fix: Fixed problem with login to UNC resources (introduced in 2025.01.15).

CIMCO MDC-Max 2025.01.16

Fix: Fixed problem with option preventing multiple users to access the configuration not always working. (S26369)
Change: Added a more descriptive message to the binary connector in case of an exception.

CIMCO Software 2025.01.15 Freigegeben: 17-09-25Register to download

Änderungen gegenüber der Vorgängerversion:

CIMCO Edit 2025.01.15

Change: Updates to generic machine models.
Fix: Fanuc MX turning reverse post: added "Ignore M6" and "Tool offset digits" settings.
Change: Improved simulation stability.
Fix: Siemens milling reverse post: ROT. (S26307)
Fix: Siemens turning reverse post: CYCLE93, CYCLE86.
Fix: Reverse post: lathe threading with dwell issue.
New: Collision detection option added for static head models in the machine builder.
Fix: A machine builder issue where left/right turret mount position options would not update correctly when switching between mounts.
Fix: Mazak Integrex reverse post: G28.
Fix: Reverse post: G0G80 issue.
Fix: Mitsubishi turning reverse post: G87.
New: Fanuc turning reverse post: "Tool change method" control setting.
New: Fidia milling reverse post. (S26238)
Fix: Mazak reverse posts: G66/66.1/67. (S26235)
Fix: Improved robustness of method that revolves geometries for turning.
Fix: Centroid milling reverse post: G68.1, G173-176, G181-189. (S26207)
Fix: A view plane issue when back-plotting using certain dual spindle machines.
Fix: A flicker during simulation playback with true vision active.
Fix: Slightly different gloss material rendering during true vision.
Fix: A rare deadlock when closing the simulation window.
Fix: Tool Manager: Internal threading insert crash.

CIMCO DNC-Max 2025.01.15

Fix: Fixed problem with auto receive path feature not accepting spaces. (S26280)
Fix: Fixed issue with shared NC-Base machines not being able to send each others associated files due to option that was always hidden.
Fix: Added support for pinging or resolving host name before connecting to UNC resource. (S24944)

CIMCO MDC-Max 2025.01.15

Fix: Web Client: Fixed updating of static dashboards.
Fix: Web Client: Fixed caching and config error for timelines when using same timeline on multiple dashboards.
Fix: Fixed import of tables when imported tables had wrong unique ids.
Fix: Fixed an issue in the flat file protocol related to ODBC 2018 requiring a trusted server certificate. (S26266)
Fix: Fixed issue with incorrect calculation of Rebuild progress.
Change: The RECALDAYS parameter was added to the UI.
Fix: Fixed a potential issue with an incorrect start time in Calculating.
Fix: Fixed an issue in the Modbus RTU protocol when reading discrete inputs that caused the error message 'Received incorrect amount of data'.
Change: RT DB TIMELINE tables have changed: the state name is now plain text instead of an MDC evaluator.
Fix: Fixed a potential buffer overflow issue in Haas NGC protocol.
Fix: Fixed issue where STX files were not generated at midnight when RECALCDAYS was set to more than 1 day.

CIMCO NC-Base 2025.01.15

New: Added a new CONNECTOPTIONS parameter for MSSQL with a default value ';Encrypt=yes;TrustServerCertificate=yes.'
Fix: Fixed tool list in pdf format being corrupted under certain circumstances.

CIMCO Software 2025.01.14 Freigegeben: 28-08-25Register to download

Änderungen gegenüber der Vorgängerversion:

CIMCO Software 2025.01.14

Change: Updated Chinese Simplified translations.

CIMCO Edit 2025.01.14

Fix: Mazak turning reverse post: G53.
Fix: Mazak SmoothAi reverse posts: G84. (S26148)
Fix: An machine group preview button issue in the machine configuration editor.
Fix: Okuma milling reverse post: M15/M16.
Change: Stock simulation stability improvements.
Fix: An issue where stock update did not synchronize with the toolpath slider in a specific case.
Fix: Reverse post: Incorrect simulation of tool change in some cases. (S26130)
Fix: 'Find All' now works when Use regular expression is enabled.
Fix: 'Bookmark All' now works when Use regular expression is enabled.
Fix: Fixed an issue where the window wouldn't reopen in the correct position after using Snap Layouts. (S26111)
Fix: Fixed problem starting editor after using /?.
Fix: An issue where the window title would say READ-ONLY during simulation.
Fix: Siemens turning reverse post: diameter/radius programming for arc center X value (G2/G3 I).
New: Added a 5 axis sample for Fanuc, Haas, Heidenhain, Mazak, Okuma and Siemens controls.
Fix: Machine embedded subprograms support for encrypted configurations. (S25619)

CIMCO DNC-Max 2025.01.14

New: Added support for configuring Haas Serial Monitoring within DNC-Max port configuration. (S25956)
Fix: Fixed Port Logs settings not saving correctly when changing server settings via DNCMaxServiceManager. (S26005)

CIMCO MDC-Max 2025.01.14

Fix: Fixed an issue where the MDC engine did not process archive data when the RECLACDAYS parameter was set to more than 1 day.
Fix: Focas protocol: fixed generating cyclestart when the port was started.
Fix: Fixed a potential issue when email configuration is not saved after a fresh install.
Fix: Fixed telemetry view for MSSQL database (datetime columns).
New: Added additional state info to the timeline db table.

CIMCO NC-Base 2025.01.14

Change: Reduced editor startup time when database not responding.

CIMCO Software 2025.01.13 Freigegeben: 18-08-25Register to download

Änderungen gegenüber der Vorgängerversion:

CIMCO Software 2025.01.13

Change: Updated Chinese Simplified translations.

CIMCO Edit 2025.01.13

New: Added 'jump to cut' feature.
New: Added 'color toolpath by feedrate' feature.
Fix: An issue where .CimcoSimData would not automatically be associated to open with the presentation viewer launcher.
New: Now includes tool 3D files when exporting simulation bundle support package.

CIMCO DNC-Max 2025.01.13

Fix: Fixed an issue navigating files using arrow keys in Select file to send dialog. (S26042)
Fix: Web Client: Fixed parsing of permissions.

CIMCO NC-Base 2025.01.13

Fix: Fixed missing translations in right-click context menu for text fields. (S26016)

CIMCO Software 2025.01.12 Freigegeben: 13-08-25Register to download

Änderungen gegenüber der Vorgängerversion:

CIMCO Edit 2025.01.12

Fix: A freeze after creating a new machine in the machine configuration editor when right clicking in the name field.
Fix: Intel integrated graphics loading simulation slowly and sometimes crashing.
Fix: A rotational axis false limit over-travel reporting.
New: Sub-Spindle Offset setting.
Fix: OSAI Milling reverse post: UPR command. (S25846)

CIMCO DNC-Max 2025.01.12

Fix: Web Client: Fixed issue causing the machine list scroll bar to be missing.
Fix: Fixed issue with TELNET when AUTHENTICATE command is expected even authentication is disabled.

CIMCO MDC-Max 2025.01.12

Fix: Web Client: Fixed an issue causing Active Directory SSO reauthentication to fail occasionally.
New: OPC protocol - introduced a regular expression for string custom variables.
New: Added new parameters to Focas, OPC and MTConnect protocols. (Set Feed Hold when FOVR = 0; Set FOVR = 0 when Feed Hold is active; Generate Cycle On when Feed Hold Off).

CIMCO NC-Base 2025.01.12

Fix: Fixed issue with NC-Base structure upgrade to version 8.02.07 when a new structure is already in place but version doesn't match.

CIMCO Software 2025.01.11 Freigegeben: 07-08-25Register to download

Änderungen gegenüber der Vorgängerversion:

CIMCO Edit 2025.01.11

Fix: Heidenhain reverse post: cycle 1300/1301.
Fix: "Mazak SmoothAi MillTurn" reverse post is renamed to "Mazak SmoothAi Milling with Turning".
Fix: Heidenhain reverse posts: cycle 8.0, 233, 220.
Fix: An issue where stock STL and DXF files were not included in the simulation bundle export.
New: Stock transfer and dual spindle machine simulation support.
Fix: An issue where the simulation would sometimes hang when closing and opening it again.
Fix: An issue where stock simulation would not always reset completely when going back to the beginning of the toolpath.
Fix: A rotary axis rapid interpolation issue.
New: Added ability to extract and open embedded NC programs from TRAUB WinFlex files. This setting is available in General Settings.
Fix: Haas NGC Milling reverse post: G234. (S25872)
New: Added --no-bring-to-front flag to prevent the editor from being brought to the foreground when called via command line. (S25874)
New: Optimized CimcoSimData file sizes.
Fix: An interpolation issue when in polar coordinate G12.1 mode.
Fix: An issue where a lathe drilling tool didn't cut the stock.
Fix: Fanuc STARGB reverse post extension: Y-axis diameter programming control setting, G266, G83.
New: Now shows the machine origin in machine builder.
Fix: Mazak turning reverse posts: G12.1.
Fix: An issue where false end mills / stock collisions would sometimes be detected during retract moves.
Fix: An issue where the cross section offset would reset when changing stock quality.
Fix: Tool collisions being reported twice when the machine contains a turret.
New: Added collinear axes limit checks to error reporting.
Fix: Cross section view setup is saved to configuration in Backplot mode. Removed "Remember toolpath mode between sessions" option. It is now always remembered. (S25670)
Fix: Tool manager: added "radius compensation value" parameter to milling assembly. Reverse post: supported tool radius compensation number (D). (S25610)
Fix: Siemens turning reverse post: SUPA command.
Fix: Mazak milling reverse posts: G54.4. (S25698)
Fix: A turning solid simulation issue involving certain custom grooving tools.
New: Added file type sort button.
Fix: Added "Fanuc Belotti Trim 4015" reverse post extension. (S25617)

CIMCO DNC-Max 2025.01.11

New: Introduced encryption and authentication of Telnet communication.

CIMCO MDC-Max 2025.01.11

Fix: Fixed issue in Email Settings MDC Variables when it was limited to 12 variables. (S25588)
New: Added a new check box on RT DB setup sheet to enable / disable data aligning to schedule for DB table of timeline type. (S25565)
Fix: Fixed gaps in RT DB tables after rebuild when Calculating was set to more than 1 day.
Fix: Fixed issue with hanging MDC port when backdating multiple downtime's from web client.
New: Introduced multi channels in the Fanuc Focas protocol.
Fix: Fixed partcount generating in Mitsubishi protocol after fresh start.
Fix: Fixed issue when DB tables are not evaluated if MSG[xxx] is used in OPEN / CLOSE/ LOG formula.
New: Focas protocol supports multi channel systems.

CIMCO NC-Base 2025.01.11

Fix: Web Client: Fixed issue with AD login when using multiple domain servers.
New: An option to allow multiple external users to be linked to one NC-Base user during login.

CIMCO Software 2025.01.10 Freigegeben: 16-07-25Register to download

Änderungen gegenüber der Vorgängerversion:

CIMCO Edit 2025.01.10

Fix: Improved solid collision detection robustness.
New: Mazak SmoothAi MillTurn reverse post. (S25293)
Fix: Heidenhain reverse posts: PLANE ... COORD command. (S25633)
Fix: Heidenhain reverse posts: M91 not simulated correctly in some cases. (S25656)
Fix: Fixed an issue where the Save Setup function overwrote the original .setup file after renaming an NC file, instead of creating a new one. (S25098)
Fix: Adjusted Tool Manager minimum window height to support smaller displays and high-DPI scaling. (S25645)
Fix: Okuma milling reverse post: M52-54, GRDX/GRDY, DGRDX/DGRDY, SQRX/SQRY.
Fix: Fanuc reverse posts: issue with expressions using #0 variable.
Fix: Hurco milling reverse post: added "NC mode" control setting. (S25444)
Fix: Delectron milling reverse post: G2/G3 uses I, J for center. (S25457)
Fix: Okuma reverse posts: clamp to limits is enabled by default.
Fix: Fanuc reverse posts: added "Increment system" control setting (#1004 bit 1). (S25586)
Fix: Fanuc turning reverse post: tool change issue in some cases.
Fix: Tool manager: internal threading holder head shape.
Fix: Fanuc turning reverse post: M83-85, M329. (S23489)
Fix: Siemens reverse posts: S1/S2, M1/M2.
Fix: Mazak milling reverse posts: Added F85 bit 2 to control settings. Fixed G73. (S25416)
Fix: Reverse post: Tool number parsing issue in some cases.
New: Mitsubishi turning reverse post: added "Number of tool offset digits" setting.
Fix: Hurco milling reverse post: M126-129.
Fix: Heidenhain milling reverse post: SYSWRITE.
Fix: Renamed "Heidenhain Turning" to "Heidenhain Milling with Turning".
Fix: Fanuc milling reverse post: added WKP control setting 19696 bit 5.
New: Added simulation support package export.
Fix: Reverse post: rotation angles adjustment when it is very close to machine limits.
New: Multiple stock models supported.
Fix: Reverse post: issue with wrong line numbering in some case when calling subprograms.
New: Stock from DXF files.
Fix: Haas milling reverse posts: G268XYZ.
Fix: Stock origin "Center" support in fast simulation for rectangular and cylindrical stock.
Fix: An issue where the spindle profile was not always detected correctly for solid collision detection.
New: Added support for Multi Channel templates - enabling users to save, load, and reuse custom multi channel configurations across different File Types. The installer includes a set of read-only system templates to help users get started. (S24857)
Fix: Fixed an issue where P123 did not synchronize correctly with channels 1, 2, and 3.
Fix: Fixed an issue in the Multi Channel setup where input fields using regular expressions would incorrectly trigger the syntax error indicator (icon in the top-right corner) when the regex contained a space, despite being valid.
Fix: Restored support for synchronization using channel numbers in user-defined mode when "Extract Channel from line" is enabled, matching the behaviour of the predefined mode Index-Traub.

CIMCO DNC-Max 2025.01.10

Fix: Web Client: Fixed issue with very long usernames overlapping the logout button.
New: Web Client: Added file preview to split screen send/receive.
Fix: Web Server: Can now reconnect to DNC-Max Server if there has been a network outage.
Change: Reduced server startup time.
Change: Changed remote control telnet connections to use SSL/TLS. (S24973)
Fix: Fixed socket leak when sending files using remote control application.
Fix: Fixed memory leak in client/server IPC SSL connections.
Fix: Fixed a potential crash of DNC server when alarm message read by MTConnect protocol is too long. (S24810)

CIMCO MDC-Max 2025.01.10

New: Web Client: Split screen can split vertically.
Fix: Fixed doubling $ issue in MQTT protocol.
Fix: Web Client: Fixed issue with showing text files in operator screen file preview.
Fix: Fixed issue with setting "Remove inactive machines/groups" not removing columns correctly.
Fix: Fixed wrong operator in timelines for thick client.
New: HW outputs can be imported from OEM link (Works only on server and OEMLink ini file needs to be present and OEMLink activated in the DNC ini file.).
Fix: Fixed a potential crash of MDC client when a screen with button indicators is about to open and MDC server is offline.
New: Added a new option in RT DB tables to fill in also End time when periodic update is active.
New: Individual recipients in Email notifications now support $ environment variables.
Change: Contentiously store engine period is no disabled by default (set to 0).
Fix: Web Client: Documents can now be shown from the documents folder.
New: Web Client: Added new dashboard type to embed external dashboards into MDC-Max.

CIMCO NC-Base 2025.01.10

New: Web Client: Support for photo uploads as associated files for programs.
New: Web Client: Now possible to download program files.
Fix: Updated customizable display text of 'Machine' correctly in UI.
Fix: Usernames are now ordered in the dialog when one LDAP account is linked to multiple NC-Base accounts.
Fix: Web Client: Sub-programs will now be sent from NC-Base Web Client.

CIMCO Software 2025.01.09 Freigegeben: 11-06-25Register to download

Änderungen gegenüber der Vorgängerversion:

CIMCO Edit 2025.01.09

Fix: Work origin and offsets configuration issues for turning on milling machines.
Fix: Reverse post: tool change position for lathe with turret.
Fix: Mazak milling reverse posts: G12.1/G13.1.
Fix: Okuma reverse posts: Added clamp to machine limits control settings per X/Y/Z axis. (S25380)
Fix: Toolpath statistics: tool change time setting now allows floating point numbers. (S25294)
Fix: Okuma Milling reverse post: G11, CHFR/CHFC, FMILR/FMILF, COPY/COPYE.

CIMCO DNC-Max 2025.01.09

Fix: Fixed issue where auto backup sheet always showed up when searching in settings.

CIMCO MDC-Max 2025.01.09

Fix: Fixed issue when MDC system expressions like CHANGED[JOB] didn't work for COUNTERS[xxx]. Introduced in 2024.01.34 with a fix for doubling COUNTER[xxx] when the counter is used in a TEXTVAR[xxx].
Fix: WEB Client: Fix crash of DNC-Max server when editing MDC-Max config and running web server.
Fix: Web Client: Fixed issue with timelines sometimes getting wrong data.
Fix: Fixed issue with MONONLINE status in Flat file protocol when 'Online status based on data availability' was used.
Fix: Web Client: Fixed scrollbar issue on status screens.
Fix: Web Client: Barcode/QR code input now auto-submits when "Assume barcode input" is enabled for the input field.
Fix: Fixed printing of 3d pie charts.
Fix: Fixed missing background in HTML reports sent in emails.
Fix: Fixed a customer specific database view.

CIMCO NC-Base 2025.01.09

New: Web Client: File preview can now be shown below search results.
Fix: Export to correct path.
Fix: Fixed crash when exporting dependencies.
New: New customizable display text for "Machine".
New: Web Client: Added Sub program related columns.
Fix: Web Client: Fixed clear button for search.

CIMCO Software 2025.01.08 Freigegeben: 30-05-25Register to download

Änderungen gegenüber der Vorgängerversion:

CIMCO Edit 2025.01.08

Fix: Tool manager: Internal grooving/threading tools head adjustments. (S25262)
Fix: An issue where simple math function only remembered 3 decimal points of the value.
Fix: Reverse post: issue when switching between Fanuc/Mazak and Mitsubishi turning reverse posts.

CIMCO DNC-Max 2025.01.08

Fix: Web Client: Fixed permission issue for when having NC-Base link enabled but not NC-Base logins.
Fix: Fixed issue with DNC-Max client sometimes hanging when logging in using NC-Base passwords with old passwords.

CIMCO MDC-Max 2025.01.08

Fix: Fixed crash of MDC server with active web timelines when report configuration is updated.
Change: When a table is sent in email and a time period is set to 'Selected day/week/...' it will use time period of a report in case the report is sent too.
Fix: Fixed issue in UI when overwrite column value on setup sheet 'Log Event / Timeline Settings' was not stored.
Fix: Fixed issue with charts sent as report in email. (S25275)
Fix: Fixed issue with emails sent on Schedule when sometimes the same email was sent 3 times.
Fix: Fixed MDC emails when backups were sent even if Attachment checkbox was unchecked.
Fix: Fixed issue with emails having large HTML body (HTML reports sent in emails).
Change: Added support for another HTTP methods in ExternIO like DELETE, PUT, PATCH. (S24664)

CIMCO Software 2025.01.07 Freigegeben: 27-05-25

Änderungen gegenüber der Vorgängerversion:

CIMCO Software 2025.01.07

New: Now logs in the NCBASE system log all NC-Base login and logouts through the DNC-MAX Server, DNC-MAX Client, the editor / NC-Base and MDC.

CIMCO Edit 2025.01.07

Fix: A machine configuration issue where 'spindle' could be created incorrectly in the kinematic chain.
Fix: Turning reverse post: tool orientation issue. (S23881)
Fix: Okuma milling reverse post: radius compensation issue. (S24986)
Fix: An issue where true vision would show mouse point compare value when outside stock.
Fix: Heidenhain reverse post: cycle 301. (S25064)
Fix: Delectron reverse post: G800. (S25006)
Fix: Tool Manager: Thread mill flute length validation. (S24977)
Fix: Fagor reverse posts: G36/G39.
New: True vision now supported with cross section views.
Fix: Improved simulation robustness.
New: Centroid milling reverse post. (S24838)
Fix: A possible crash in turning stock simulation.

CIMCO MDC-Max 2025.01.07

Fix: Fixed ad login issue when DNC service was running with a system account.
Fix: Added legacy techometer in the graph settings.
Fix: Fixed issue when COUNTERS were suspended during breaks even if not set for it.
Fix: Fixed issue with backdating when incorrect message in the monitor log was updated under some specific circumstances (Multiple 'Downtime start' message).

CIMCO NC-Base 2025.01.07

Fix: Fixed issue with the toolbar not being updated to reflect the current state of the settings.
Fix: Fixed issue with disabled memo, tool, and setup lists options in UI.

CIMCO Software 2025.01.06 Freigegeben: 19-05-25

Änderungen gegenüber der Vorgängerversion:

CIMCO Edit 2025.01.06

Fix: Issue with "cutter allowance" setting not converted to inches in UI.
Fix: Fagor reverse post: #RTCP. (S24897)
New: Added measure distance to the presentation viewer.
New: Can now set stock compare colors in presentation viewer.
New: Cross section dropdown in presentation viewer.
Fix: An issue where cross section origin did not start centered.
Fix: An issue where stopping conditions did not stop at a collision.
Fix: Fagor milling reverse post: tool length compensation. (S25035)
Fix: Reverse post: Lathe drilling tool with 270deg orientation.
Fix: Tool Manager: crash when updating lathe tools with zero corner radius.
New: Added stock color by tool setting to presentation viewer.
New: Added collision report to presentation viewer.
New: Can now save stock as STL in presentation viewer.
Fix: More robust zoom window.
Fix: Tool change position for turret case. Lathe drilling tool tip compensation. (S24876)
Fix: Fixed a possible crash on startup when loading a machine with an invalid configuration.
Fix: Fixed clipping of long strings when opening the 'Info variable:' dropdown in the Macro Setup dialog by widening the drop-down list to fit its contents.

CIMCO DNC-Max 2025.01.06

New: Added a new option to translate also control characters Xon/Xoff based on selected port mode (transfer coding). (S24747)

CIMCO MDC-Max 2025.01.06

Fix: Fixed issue when Patlite device with Buzzer enabled caused DNC server to crash. (S24901)
Fix: Fixed Issue with MDC email UI when a new email set couldn't be inserted if the email set list is empty. (S25075)
Fix: MDC Event Log do now log web client as source.
Fix: Fixed DB View Excel export not appending data to excel template.
New: Web Client: Timelines do now recalculate after backdating.
Fix: Correct column format when having table under graph.

CIMCO NC-Base 2025.01.06

Fix: Fixed broken customer folders when projects were disabled.
Fix: Fixed issues with file ownership of temporary files, causing issues with denied access to files in the import queue.
Fix: Fixed issue with MSSQL passwords containing '}' not being able to connect.

CIMCO Software 2025.01.05 Freigegeben: 06-05-25Register to download

Änderungen gegenüber der Vorgängerversion:

CIMCO Edit 2025.01.05

Fix: Small scar like stock corruption on certain 5 axis simultaneous moves when using accurate zoom far zoomed in.
Fix: Small black dots when using true vision with certain drilling toolpaths.
Change: Updated macros and associated diagrams in Haas Milling and Haas Turning file type templates.
Change: Updated Program Start and Header diagrams in Fagor, Fanuc, Heidenhain, and Siemens file type templates.
Fix: Corrected multiple typos in macro descriptions across several templates.
Fix: Fixed broken newline characters in the macros of Fagor Milling and Flexium_M00040EN-00_NUM file type templates.

CIMCO DNC-Max 2025.01.05

Fix: Don't update port list on login if Only Show Allowed ports is not enabled.

CIMCO MDC-Max 2025.01.05

New: Added mandatory option for multi-input field on operator screen.

CIMCO Software 2025.01.04 Freigegeben: 05-05-25Register to download

Änderungen gegenüber der Vorgängerversion:

CIMCO Edit 2025.01.04

New: Added animation mode and view commands to presentation viewer.
New: Faster stock animation for turning programs.
Fix: Fixed an occasional zoom window issue when stock is from STL.
Fix: Improved simulation robustness of stock from STL.
Fix: An issue where it was not possible to hide the tool holder in machine simulation when mounted on a turret.
Fix: Fixed an issue where the '--line' command-line argument didn't jump to line in already opened files.
Fix: Fixed problems with M32 and M+ files in Mazatrol Viewer.
Fix: Fanuc turning reverse post: drilling time issue.

CIMCO DNC-Max 2025.01.04

Fix: Fixed issue detecting when using NC-Base logins, resulting in network busy errors.
Fix: Fixed issue with logins for DNC-Max client if launched from server.

CIMCO MDC-Max 2025.01.04

Change: Web Client: Now possible to associate a timeline with backdating screen.
New: Bar charts can now use user defined colors in the web client.

CIMCO NC-Base 2025.01.04

New: It is now possible to search for specific programs using URL search parameters.

CIMCO Software 2025.01.03 Freigegeben: 24-04-25Register to download

Änderungen gegenüber der Vorgängerversion:

CIMCO Edit 2025.01.03

Fix: Heidenhain reverse post: CYCL DEF 301. (S24354)
Fix: Heidenhain reverse post: TRANS DATUM AXIS.
Fix: Okuma turning reverse post: block skips.
Fix: A crash that would sometimes happen when changing stock STL.
Fix: An arc interpolation issue during toolpath playback.
Fix: A linearization issue for full circle arcs.
Fix: Siemens reverse posts: Added support for $P_TOOLL, $MA_POS_LIMIT_MINUS, $MA_POS_LIMIT_PLUS variables. (S23648)

CIMCO DNC-Max 2025.01.03

Fix: Fixed a potential hang of DNC server in case of an error in live update of database during DNC server start up.
New: Added a new MDC port type that doesn't consume a DNC license but only an MDC license. MDC license is consumed on any port only if MDC protocols are enabled.

CIMCO MDC-Max 2025.01.03

Fix: Fixed issue with missing machine labels on timeline report sent in email. (S24806)
Fix: Fixed upgrade of MDC-Max Client configuration from older versions. (S24728)
New: Web Client: Added a downtime timeline to the backdating screen.
Fix: Fixed issue causing empty default strings in web client when importing CSV translations.
Change: Updated Archiving to handle a case when data is not consistently written in archive (DAT file).

CIMCO NC-Base 2025.01.03

Fix: Web Client: Machine groups in search dropdown are now in alphabetical order.

CIMCO Software 2025.01.02 Freigegeben: 14-04-25Register to download

Änderungen gegenüber der Vorgängerversion:

CIMCO Edit 2025.01.02

Fix: Tool manager: Added taper angle parameter to thread mill. (S24528)
Fix: Fanuc turning reverse posts: G71.

CIMCO DNC-Max 2025.01.02

Fix: Fixed issue of duplication of file that sometimes occurred when merging received programs for Fanuc Focas.
New: Web Client: Added a filename filter in the file explorer for send/receive operations.
Fix: Fixed issue when DNC was unable to delete a directory content with more than 65 535 items.

CIMCO MDC-Max 2025.01.02

Fix: Fixed crash of MDC client when editing TEXTVARs. (S24745)
Fix: Fixed issue when Copying a Global Recipient does not include the Notification selections. (S24673)
Fix: Web Client: Added operator dashboard button type "Send values from all input fields by one message".
Change: Updated generation of reports when variables like PROGRAM / JOB / MACHINE are processed only when they are checked (Include information check box or Process checkbox) in report setup.

CIMCO Software 2025.01.01 Freigegeben: 10-04-25Register to download

Änderungen gegenüber der Vorgängerversion:

CIMCO Edit 2025.01.01

New: Fagor milling reverse post.

CIMCO DNC-Max 2025.01.01

Change: User is now logged out when server connection is lost.
Fix: Fixed authentication failure resulting in Network Busy error in several scenarios.
New: Removed NC-Base login option from DNC Client, now the client will use NC-Base logins if the option is selected on the server.
Fix: Fixed user permissions and they now allow for individual permission selection.
New: Added new client config user permission.
New: Added machine sheet to DNC-Max config to allow better configuration of user permissions.

CIMCO MDC-Max 2025.01.01

Fix: Add versioning to MDC client and server to enforce compatibility.

CIMCO NC-Base 2025.01.01

Change: Changed 'User can view unapproved programs' permission to 'User can only view approved programs', thus inverting the permission.