CIMCO Software 2026 Veröffentlichungen

ZeigenAlle Veröffentlichungen Nur Downloads

VersionshinweiseAlle erweitern Alles einklappen

CIMCO Software 2026.01.22 Freigegeben: 11-09-26Register to download

Änderungen gegenüber der Vorgängerversion:

CIMCO Software 2026.01.22

New: Introduced the new CIMCO Scheduler, a web-based production scheduling application available through the MDC-Max Web Client.

CIMCO Edit 2026.01.22

Fix: Reverse post: issue with Y-shifted tool mounts.
Fix: Fanuc milling reverse post: #4130.
Fix: Reverse post: wrong message output for selected code simulation in some cases.
New: Clickable view cube.
New: Grid-lines in Backplot.
New: Now uses empty holder instead of default when scanned tool doesn't contain a holder.
New: Now shows license info in presentation viewer status bar.
Fix: Station number scanning for custom tools.
Fix: Turning reverse posts: wrong tool cutter point in some cases.
Fix: Okuma milling reverse post: G272/282.

CIMCO Software 2026.01.21 Freigegeben: 08-09-26Register to download

Änderungen gegenüber der Vorgängerversion:

CIMCO Edit 2026.01.21

New: Crisper rendering when windows scaling is 125%, 150% or 175%.
New: Better frame rate when windows scaling is 175% or above.
Fix: Turning reverse posts: wrong moves on sub-spindle when in inches.
New: Turning inserts can now be seen through the holders.
New: Crisper text rendering.
Fix: Now doesn't revolve the table for turning moves that position the spindle.
Fix: An issue where custom tool profiles with multiple adjacent arcs could corrupt stock simulation.
Fix: Custom tool from DXF when containing 180 degree arcs.
Fix: Measure distance edge and corner highlight would sometimes appear when not measuring.
Fix: Okuma reverse posts: MODIN, MODOUT.
Fix: Haas reverse posts: fixed DPRNT, POPEN, PCLOSE warnings.
Fix: Okuma turning reverse post: G20.
Fix: Fanuc milling reverse post: M29.
Fix: Mazak reverse posts: G84.2.
Fix: Turning reverse posts: wrong turret head moves at the first tool change.
Fix: Stock from DXF when DXF contains lwpolylines.

CIMCO DNC-Max 2026.01.21

Fix: Fixed a potential crash in the DNC Server setup when copying an IOLogic unit.

CIMCO MDC-Max 2026.01.21

Fix: Fixed an issue in the MQTT UI where deleting a parser set could remove the wrong set.
Fix: Fixed an issue in the MQTT protocol when the client ID was not unique.
Fix: Fixed a bug in the Operator real-time database table when using the CTIMEFORMAT type.
New: Added Windows Agent support to the Flat File protocol.
Fix: Fixed Focas offline timeout setting being ignored.
Fix: Fixed a potential issue where generating multiple email reports could result in incomplete reports. (S28428)
New: Added a new option to the Heidenhain COM protocol to disable the Heidenhain 'Automatic Event Interface' as a workaround for issues with buggy TNC 640 controls running software version 340590.
Change: Updated the Heidenhain Direct protocol to minimize machine polling.

CIMCO NC-Base 2026.01.21

Fix: Fixed an issue that could prevent the NC-Base service from starting after certain Windows updates. (S30164)
Fix: Fixed NC-Base editor saves incorrectly triggering update processing for unchanged files.

CIMCO Software 2026.01.20 Freigegeben: 01-09-26Register to download

Änderungen gegenüber der Vorgängerversion:

CIMCO Edit 2026.01.20

New: Machines are now grouped in machine builder by 'My machines' and 'Preconfigured machines'.
Fix: Fanuc milling reverse post: G53.1. (S30147)
Fix: A crash when starting simulation reported for some users.
New: Measure distance now snaps to geometries, edges and corners.
New: Cross Section now available with only workpiece.
New: Cross Section can now cut through tool.

CIMCO Software 2026.01.19 Freigegeben: 31-08-26Register to download

Änderungen gegenüber der Vorgängerversion:

CIMCO Edit 2026.01.19

Fix: Mazak reverse posts: G53.1, M107/108.
Fix: Editor jumps line when editing NC code.
Fix: An issue where cross section was off center.
Fix: An issue where cross section didn't always save state properly when toggling.
Fix: Siemens turning reverse post: TRAORI.
Fix: Mazak Integrex reverse post: G97R, G43.4P.
Fix: Fanuc milling reverse post: #999.
Fix: Millplus reverse post: G22, G23, G29.
Fix: Multiple scanned geometries using same STL but different transformations.
Fix: Haas reverse posts: M97, G103.
New: Custom lathe holder STL is now used without a profile.
New: Remembers work offsets in file type.
New: Brother milling with turning reverse post. (S28627)
Fix: Millplus reverse post: G74. Added home position control settings.
New: Show active dynamic offset.
Fix: Tool vs fixture collision detection in Backplot mode on lathes.
Fix: Y axis turning issues.
Fix: An issue where remove chips could remove the entire stock model.
New: Added Backplot, NC-assist, Multi-Channel View and Advanced Math Functions to CIMCO Edit Core.
New: Added collision and limit over-travel report to CIMCO Edit Pro.
New: Added stopping conditions to CIMCO Edit Pro.
New: Added collision highlight to CIMCO Edit Pro.

CIMCO DNC-Max 2026.01.19

Fix: Updated CIMCO Agent to handle very large files.
Change: Better port logging of port licenses when a port is denied.
Fix: Fixed issue with port licensing after applying global port change.
Fix: Fixed issue with global port change regarding port licenses.
Fix: Fixed race condition in regards to license port count.

CIMCO MDC-Max 2026.01.19

New: Added a HELO host name option to the Notification SMTP interface. Updated the SMTP debug log.
New: Added a bridge mode for the FOCAS protocol as a workaround for a bug in the FOCAS library that can cause it to hang under poor network conditions.
Fix: Fixed an issue in the System table view where 'Find All' was not working.
Fix: Fixed custom variables in the MNet protocol.
Fix: Changed a default location of reports to ...\AppData\... if not specified in configuration. (S29948)

CIMCO NC-Base 2026.01.19

New: Added options to automatically update existing memo files, tool lists, and setup sheets when a program file is saved, updated through Auto Import or Auto Receive, or accepted from the Import Queue.
Fix: Fixed program update processing occurring before the edited file was successfully saved.
New: Added new setting "Lock new programs", which locks newly created programs.
Fix: Fixed crash in Execute settings sheet that could occur.
Fix: Fixed an issue with the Oracle database upgrade to DB version 8.02.08.
Change: The maximum available size of program fields in NC-Base is now determined by the actual column size in the database.

CIMCO Software 2026.01.18 Freigegeben: 19-08-26Register to download

Änderungen gegenüber der Vorgängerversion:

CIMCO Edit 2026.01.18

Fix: Fixed an issue where File Type would unexpectedly change in certain scenarios. (S30015)
New: Manual threading moves now supported.
Fix: Haas milling reverse posts: #3201-3400.

CIMCO Software 2026.01.17 Freigegeben: 18-08-26Register to download

Änderungen gegenüber der Vorgängerversion:

CIMCO Edit 2026.01.17

Fix: Fanuc turning reverse post: added "R point programming" control setting for G81-89 of G-code system A. (S28324)
Fix: Haas milling reverse posts: added missing variables support.
Fix: Okuma milling reverse post: LAA, ARC, OMIT. (S25608)
Fix: Heidenhain reverse posts: SYSWRITE ID230. (S28713)
Fix: Fixed an issue for custom machine home position.
Fix: Heidenhain reverse posts: AXIS SPAT.
Fix: Reverse post: failing during subprogram search in some cases.
New: Datron milling reverse post. (S27194)
Fix: Siemens milling reverse posts: CYCLE72. (S28552)
Fix: Siemens milling reverse posts: G147/148/247/248/347/348. (S28557)
Fix: Heidenhain milling with turning reverse post: cycle 800.
Fix: Fanuc milling reverse post: G31.
Fix: Heidenhain reverse posts: * is used as comment only at line start.
Fix: Heidenhain reverse posts: TOOL CALL now accepts QS variables as tool name.
Fix: Siemens turning reverse post: cycle800.
New: Hurco turning reverse post. (S29095)
New: Added Off Center Turret generic lathe and 45 degree table/head machine.
New: Fanuc milling reverse post: arc tolerance control setting.
Fix: Heidenhain reverse posts: cycle 251/252.
New: Backplot from File now shows NC code.
New: Backplot active selection with live updates as you change the selection.
Fix: Fixed regex Find/Replace replacing next match instead of highlighted match. (S29840)
New: Tool path statistics: min/max spindle speed.
New: Tool list: extraction from tool call line.
New: G320 measurement cycle supported in Fanuc.
Fix: Reverse post: "#3000=1 (MESSAGE)" shows MESSAGE text for supported reverse posts.
Fix: Standardized C++ API.
Fix: Mazak Integrex reverse post: tool change command.
Fix: Okuma turning reverse post: TD.
Fix: OSAI milling reverse post: h. (S29796)
Fix: Haas reverse posts: now outputs error message when compensation input starts with an arc.
Fix: MillPlus reverse post: G43, G779, G781-789.
Fix: Reverse post: tool compensation for milling tools in mill-turn mode.
New: Custom turret slot orientations now supported.
New: Siemens ONE milling reverse post. (S24625)
Fix: An issue where machine builder preview didn't work when a Backplot window was open.
New: EControl milling reverse post.
Fix: Centroid milling reverse post: G43.3. (S28768)
Fix: Fixed an issue with syntax highlight coloring when switching between File Types. (S29792)

CIMCO CNC-Calc 2026.01.17

New: Option to select active post processor from bottom panel.
New: Enabled coordinate system axis indicators for milling. (S28930)
Removed: Disabled persistence for CAD function input.
Change: Unit scale rendering (lower right corner) changed to fixed size.
Change: Improved visibility for some cursors.
Fix: Active mouse interaction stopping when mouse leaves CAD view.
Fix: Dynamic layout in side panel not resizing buttons properly.
Fix: Artifacts in side panel when element info field are hidden.
Fix: Helix Milling 'Start at center' being ignored when lead in/out disabled. (S17940)
Change: Helix Milling cut transitioning.
Fix: Non-ANSI characters in file paths preventing opening files.
Fix: Zooming in/out scaling factors.
Change: Consistent window selection (zoom/selection).

CIMCO DNC-Max 2026.01.17

Fix: Changed the port license check when adding a new port from configured ports to active ports.
Change: Updated the saving of the auto-import configuration in the DNC Server Setup.
Fix: Fixed an issue that could corrupt the configuration in the DNC Server setup for I/O units. (S29556)
Change: Updated DNC service to handle SERVICE_CONTROL_PRESHUTDOWN.
Fix: Updated Haas serial monitor protocol to work together with DPRNT messages. (S29608)

CIMCO MDC-Max 2026.01.17

Change: Added an option in ExternIO to select the TLS version. By default, TLS 1.2/1.3 is negotiated automatically.
Fix: Web Client: Fixed issue with shopfloor font settings resetting to default.
Fix: Web Client: Fixed pdf preview in operator screen.
Fix: Updated evaluating of execution status (MTConnect, Focas, OPC).
New: Added an option to display a column with the name of the operator who was logged on when the undefined downtime was generated.
Fix: Fixed translations when importing from the Excel.
New: Added copy widgets checkbox when creating a new historical dashboard.
Fix: Fixed potential crash of server when unsupported time period is given in historical dashboards.
Fix: Fixed an issue where notification settings did not retain the selected reports.

CIMCO NC-Base 2026.01.17

New: Added four new permissions to control which parts of the configuration each user group can access.
Change: Cleaned up the server configuration. Replaced the old Advanced, Advanced 2, and Other Server settings sheets with Program & Files, Version Control, Locking & Read-only, Import Queue, and Status System sheets.

CIMCO Software 2026.01.16 Freigegeben: 16-07-26Register to download

Änderungen gegenüber der Vorgängerversion:

CIMCO Edit 2026.01.16

Fix: Fanuc milling reverse post: #517/518 are handled as common variables.
New: Matsuura milling reverse post: Fanuc based.
Fix: Fagor milling reverse post: #MCS.

CIMCO NC-Base 2026.01.16

Fix: Fixed issue with using program as a field folder.

CIMCO Software 2026.01.15 Freigegeben: 15-07-26Register to download

Änderungen gegenüber der Vorgängerversion:

CIMCO Edit 2026.01.15

Fix: Error when saving MacBundle.
Fix: bug with not loading encrypted machines.
Fix: Siemens reverse posts: CTRANS. (S29639)
Fix: Siemens turning reverse post: CYCLE800.
Fix: Fanuc milling reverse post: G10L12R.
Fix: Heidenhain milling with turning reverse post: wrong retracts.
Fix: Siemens milling reverse post: G75.
Fix: Siemens turning reverse post: W collinear axis.
Fix: Tool manager: High feed mill tool shape.
Fix: Mazak Integrex reverse post: M153/154.
Fix: Fanuc reverse post: issue with undefined subprogram arguments.
Fix: Siemens reverse post: external subprogram call by file name.
Fix: Okuma turning reverse post: TD, M323, G126/127, G136.
Fix: Siemens reverse posts: supported $AA_IM[] variables.

CIMCO MDC-Max 2026.01.15

New: Introduced $PREV expression in the advanced filter and added check for each change option for a formula evaluation.
Fix: Fixed issue when html report was not send as pdf if only as pdf was checked.
Change: Fixed an issue where numeric values in real-time DB tables configured as TEXT were returned incorrectly.

CIMCO NC-Base 2026.01.15

Fix: Fixed issue with saving Field Folders settings.
Fix: Fixed issue with NC-Base not updating modified time for programs in Microsoft SQL.
Fix: Fixed issue with Database files outside the NC-Base directory opened in the editor not closing when being auto logout was executed.
Fix: Fixed issue with users in rare cases being allowed to save files while not logged in.

CIMCO Software 2026.01.14 Freigegeben: 02-07-26

Änderungen gegenüber der Vorgängerversion:

CIMCO Edit 2026.01.14

Fix: Siemens reverse posts: max tool number is changed to 99999999.
Fix: Mitsubishi turning reverse post: spindle speed S1/2/3, tool correction G0 T*.
Fix: Fanuc milling reverse post: #0 variable comparison.
Fix: Fanuc milling reverse post: G10L12.
Fix: Centroid milling reverse post: G43.3, G0 interpolation. (S28768)
Fix: Reverse post: work offset system variables assignment issue.
Fix: MillPlus milling reverse post: G7.
Fix: Siemens milling reverse post: CYCLE840.
Fix: Reverse post: tool vector producing incorrect rotation in some cases. (S29496)
Fix: Siemens reverse posts: M7/8/9. (S29430)
Fix: Siemens reverse posts: supported rounding (RND) of arc-line and arc-arc corners. (S28559)
Fix: Haas reverse posts: supported work offset system variables #7001-#7386, #14001-#15966.

CIMCO DNC-Max 2026.01.14

Fix: Fixed issue with sending large programs via the FOCAS 1 protocol.
Fix: Fixed issue with license counts after installing new license.
Fix: Fixed issue with DNCMax client showing deleted users when logging in using NCBase passwords.
Fix: Fixed the limit on the number of items in the split window. (S29466)

CIMCO MDC-Max 2026.01.14

Fix: Fixed issue with custom variables in Haas M-net protocol. (S25167)
Fix: Improved a resolution of timeline in HTML reports. (S27777)
Fix: Fixed an issue where live and operator screens in thick clients could stop refreshing data after a live configuration change. (S28512)
Fix: Fixed issue with not working CNCINFO[xxx] expressions. (S29465)
Fix: Updated MDCMaxCMD.exe to be correctly aligned with report and table IDs.
New: Added new time expressions:TIME[NOWDAYNUMBER], TIME[DAYSTARTNUMBER], TIME[DAYENDNUMBER], TIME[ISWEEKSTART], TIME[ISWEEKEND], TIME[ISMONTHSTART], TIME[ISMONTHEND], TIME[NOWDAYNUMBER], TIME[NOWWEEKNUMBER], TIME[NOWMONTHNUMBER], TIME[NOWYEARNUMBER], TIME[DAYSTARTNUMBER], TIME[DAYENDNUMBER]. (S23391)
Change: MDC formula dialog in the Events source sheet now also lists TEXTVARs. (S29343)
New: Added regular expression for a custom variables (OPC, MTConnect, Brother)
Fix: Web Client: Fixed state name to system name conversion for accented letters in Historical Dashboards.
New: Added support for Firebird DB in ExternIO.

CIMCO NC-Base 2026.01.14

Fix: Fixed issue with incorrect user logged off log messages if DNCMax plugin was enabled.
Fix: Fixed NCBase Backup Server failing to cleanup temp files in some cases.
Change: Updated SQLAPI to version 5.4.2.

CIMCO Software Manager 2026.01.14

New: Added new feature to remotely update the license file.

CIMCO Software 2026.01.13 Freigegeben: 23-06-26Register to download

Änderungen gegenüber der Vorgängerversion:

CIMCO Edit 2026.01.13

Fix: Mitsubishi reverse posts: spindle commands S1/2/3.
Fix: Siemens reverse posts: _TC_A1/2 variables. (S29462)
Fix: Tool color not working when setup file scanning was disabled.
Fix: Slow solid removal animation in some cases when rewinding.
Fix: X or Y axis cylinder stock sometimes initially disappearing.
Fix: Heidenhain TNC7 reverse post: TCPM error message.
Fix: Coolant state output. (S29430)
Fix: Reverse post: rotation time calculation.
New: Thermwood Milling reverse post. (S26367)
Fix: Siemens reverse posts: calling subprograms starting with %_N__SPF. (S28394)
Fix: Fanuc milling reverse post: G53.1.
New: Okuma milling reverse post: G469. (S28132)

CIMCO DNC-Max 2026.01.13

Fix: Updated the CIMCO Windows Agent to handle folders containing a large number of files.
Fix: Fixed race-condition sometimes preventing the client from adding ports.

CIMCO MDC-Max 2026.01.13

Fix: Fixed an issue when inserting a new row into RT DB tables when Oracle is used.
Fix: Web Client: Fixed hour intervals in historical dashboards for when ignoring schedule.

CIMCO NC-Base 2026.01.13

Fix: Fixed issue in the NC-Base converter preventing conversion of drawing number field.

CIMCO Software 2026.01.12 Freigegeben: 17-06-26Register to download

Änderungen gegenüber der Vorgängerversion:

CIMCO Software 2026.01.12

Änderung: Aktualisierte japanische Übersetzungen.

CIMCO Edit 2026.01.12

Fix: Fixed an issue where automatic sync alignment in Multi Channel view could leave the cursor on the wrong line after editing synchronized NC files.
New: Added optional synchronization command mapping for matching different command numbers, such as M770 and M775, in multi-channel synchronization.
Change: "Ignore block skip" is moved from control settings to simulation settings.
Fix: Reverse post: G65P9811.
Fix: Okuma reverse posts: MSG.
Fix: Reverse post: inverse time feedrate (G93). (S28811)
Fix: Reverse post: lathe tool center compensation for tilt. (S28433)
New: Faster machine model / stock collision detection when the machine is frequently in close proximity.
New: More robust stock from STL when the STL contains internal geometry.
Fix: More robust machine model / stock collision detection.
Fix: A turning issue on some milling machines.
Fix: Fagor reverse post: "I" suffix support for move parameters.
Fix: Fixed an issue where multiline replace could miss occurrences within the current selection.
Fix: Fixed an issue where multiline replace would replace beyond the current selection.
Fix: Scanning supports tool location values for custom tools.
Fix: Siemens reverse posts: CYCLE800.
Fix: Roeders milling reverse post: supported Heidenhain commands/cycles. (S29321)
New: Tool manager: added tool station number to "Advanced tool location" in turning/mill-turn mode. (S29248)
Fix: Heidenhain millturn reverse post: cycle 800. (S28427)
Fix: Siemens milling reverse post: CYCLE977.
Fix: Reverse post: lathe threading when simulating on milling machine.
Fehlerbehebung: Fanuc-Dreh-Rückwärtsposten: G76.
New: Okuma turning reverse post: B-axis support. (S28045)
Fix: Heidenhain reverse posts: APPR LEN.
New: Heidenhain TNC7 milling reverse post. (S24521)
Fix: Mitsubishi turning reverse post: G74.
Fix: Siemens milling reverse post: POCKET3/4.
Fix: MacBundle issues when using custom configuration paths.

CIMCO DNC-Max 2026.01.12

Fix: Added possibility to use $Variables in default PC path in split window.
Fix: Fixed issues & wrong error messages that sometimes occurred when adding a new port through the client.
Fix: Fixed issues with environment variables in auto receive destination folder. (Fixed $ORGPATH, $ORGNAME, $ORGNAMENOEXT, $ORGDIR).
Fix: Fixed issue with Remote Request & Auto Receive sheets sometimes being blank.

CIMCO MDC-Max 2026.01.12

Fix: Fixed an issue where real-time DB tables of type Timeline were not properly aligned.
Fix: Fixed an issue where real-time DB tables were not rebuilt during a partial data rebuild.
Change: Simple MariaDB reconnections (error 2006) are no longer logged. Added database type information to the DNC Server log.
New: Added an option to reopen a previously closed sub-screen when the active state is triggered.
Change: Updated the System Table view in MDC Client.
Change: Updated SQL scripts creating the mdcemaillog, mdcconnections, and outputdevicelog tables to use nvarchar(max) instead of the deprecated ntext data type.
New: Added a 'Rebuild All' checkbox to the rebuild days selection dialog.
Fix: Fixed a potential issue in MDC when updating database tables during recalculation.
Change: Updated Heidenhain protocol to take into account this option: [OPTION18] POLLGETERROR = Yes.
Change: Updated the behavior of input field focus.
Change: Added a message box when a file opened from an operator screen does not exist.
Fix: Fixed an issue where the report interaction option was not saved.
Fix: Web client: Fixed an issue where an empty result from a job data query was not displayed correctly.
Change: It is possible now to select multiple HTML reports as attachment.
Fix: Fixed FOVR calculating for some models.

CIMCO NC-Base 2026.01.12

Fix: Fixed an SQL error when searching for programs in NCBase when using MSSQL.
New: Web Client: Added button to associate file with program.
New: Added 2 new options under Server Settings > Logging to disable the remember last value behavior of 'Log Prompts' and 'Change Comments' respectively.
Fix: Fixed an issue with saving NCBase parameters to the database when MSSQL is used.
Fix: Web Client: Fixed issue with printing files.

CIMCO Software 2026.01.11 Freigegeben: 03-06-26Register to download

Änderungen gegenüber der Vorgängerversion:

CIMCO Edit 2026.01.11

Fix: Better robustness on Intel Integrated Graphics.
Fix: An issue where turret mounts would not load.
Fix: Reverse post: spindle axis center issue in machine coordinates.
Fix: Heidenhain reverse posts: wrong rotation axis movements in some cases.
New: Reverse post: parametrized machine subprogram macros. (S29004)
New: Improved stock compare performance.
Fix: True vision rendering stale image during animation playback.
Fix: Sharpened shaft/shoulder stock collision margins.
New: Support updated web license.
Fix: Siemens reverse posts: $P_ACTFRAME. (S27059)
Fix: Siemens reverse posts: $P_UIFR.
Fix: Fanuc milling reverse post: rotated work offsets G10, G30.
Fix: Save Setup not commenting Version Number when writing to top of NC file.
Fix: Fanuc/Mazak milling reverse posts: G68.4.
Fix: Fanuc milling reverse post: G82 dwell time.
Fix: Mazak and Fanuc milling reverse posts: system variables #7001-7941.
New: Support threading tools with low corner radius and point corners.
Fix: Siemens milling reverse post: G_BACK_TUNNEL.

CIMCO DNC-Max 2026.01.11

Fix: Fixed OPC UA monitoring by updating OPC and resolving dependency conflicts.
Fix: Fixed issues with receive translators being applied to compressed files resulting in corrupt files.
Change: Changed default value of "Show only ports allowed by NCBase" to be consistent across DNC-Max Admin & CIMCO Editor DNC-Max Admin plugin (defaults to false now).

CIMCO MDC-Max 2026.01.11

Fix: Web Client: Fixed issue with showing individual OEE Gauges in the historical dashboards.
Fix: Web Client: Fixed issue causing live screen translations to not always load correctly.
Fix: Fixed issue in the Heidenhain protocol where PLC data paths of type boolean returned the strings "True" and "False" instead of the expected values 1 and 0. (S29135)
Fix: Fixed issue when automatically generated reports use incorrect locale settings.

CIMCO Software 2026.01.10 Freigegeben: 27-05-26

Änderungen gegenüber der Vorgängerversion:

CIMCO Edit 2026.01.10

Fix: Fanuc milling reverse post: G68.4.

CIMCO DNC-Max 2026.01.10

Fix: Fixed issue with protocol ports in combination with MDC protocol not being licensed.

CIMCO Software 2026.01.09 Freigegeben: 26-05-26

Änderungen gegenüber der Vorgängerversion:

CIMCO Edit 2026.01.09

Fix: An issue where default tool colors would be black instead of following color loop.
Fix: Reverse post: wrong incremental move after angular move in turning.
Fix: Reverse post: repeating macro program calls in some cases.
New: Remembers stock compare gradient setting.
New: Remembers True Vision.
New: Added simulation shortcut for going to end (Ctrl + Shift + Space).
New: Added simulation shortcut for playing / pausing (Ctrl + Shift + R).
Fix: Reverse post: inverse kinematics issue when using spindle axis.
Fix: Heidenhain reverse posts: issue with ignoring some cycle parameters in some cases.
Fix: Consistent milling tool orientation in milling and mill-turn environment. (S28130)
Fix: Siemens milling reverse post: POCKET2.

CIMCO DNC-Max 2026.01.09

Fix: Fixed issue with the Serial Haas monitor protocol where it stopped working after a program was sent to the machine.
Fix: Web Client: Fixed permission issue for showing server files in send / split window.

CIMCO MDC-Max 2026.01.09

Change: It is now possible to select a schedule when generating an HTML report by showing the extended options. (S28593)
Fix: Web Client: Fixed behavior for OEE Gauge in Historical Dashboards.
Fix: Web Client: Fixed an authentication timing issue that prevented Historical Dashboards from displaying.
Change: Dialog info box displayed on the operator panel uses the same font as the values shown on the operator panel.
New: Added an option to switch to a sub-screen based on the active state. (S28940)

CIMCO NC-Base 2026.01.09

Fix: Fixed issue where "Leave original when moving files" didn't apply in certain cases.

CIMCO Software Manager 2026.01.09

Fix: Fixed a potential crash in the Software Manager when the keyfile path contained non-ASCII/UTF-8 characters.

CIMCO Software 2026.01.08 Freigegeben: 19-05-26

Änderungen gegenüber der Vorgängerversion:

CIMCO Software 2026.01.08

Fix: Fixed issues with running multiple license servers on the same network.
Change: Updated French translations in Tool Manager.

CIMCO Edit 2026.01.08

Fix: Okuma reverse posts: OO88.
Fix: Fanuc reverse posts: G50.1, G51.1.
Fix: Reverse post: wrong entity by line number in some cases when using external subprograms.
Fix: A circumstantial freeze when closing Backplot.
New: Tweaked cursor when resizing sub program HUD.
Fix: Corrupt sub program HUD when Editing main program.
Fix: Visibility state not being remembered when toggling geometries from ribbon bar.
New: Reverse post: manual tool change position. (S28846)
Fix: Siemens reverse posts: added R1000-R1299 variables.
Fix: Reverse post: angular move issue in turning.
Fix: Siemens reverse posts: MSG command not outputs message into simulation window. (S28577)
Fix: Crash in remove chips.
Fix: Collision detection not refreshing after changing tool/workpiece setting.
Fix: Stock simulation when turning on an AC 5 axis milling machine.
Fix: Centroid reverse posts: conditional expressions. (S26828)
Fix: NC line highlight sometimes on wrong line when jumping to tool changes.
Fix: Siemens milling reverse post: CYCLE800 retract position.

CIMCO DNC-Max 2026.01.08

Fix: Fixed issues with DNC-Max Server not recognizing new port types when adding ports.
Fix: Added support for FEED Hold signal in RS232 protocol.
Change: Improved Haas Serial Monitor to parse monitoring messages. Added MONITORPREFIX=\\CR\\LF\\STX and MONITORSUFFIX=\\ETB in mch file in [HAASMONITOR] section.
Fix: Fixed wrong client count at the bottom bar of DNC-Max server application.
Fix: Fixed issue with mdc port license granting at start up.
Fix: Fixed default send directory issues for SSH protocol & CIMCO Windows Agent.
Fix: Web Client: Added modified date to send window.
New: Added official support for Microsoft Entra ID as a login module.

CIMCO MDC-Max 2026.01.08

Fix: Fixed issue where reports were generated with incorrect tables/graphs.
Change: Updated MDC notification log time in the database table to match the actual notification trigger time.
Fix: Fixed issue with the advanced filter in the Heidenhain protocol where control modes were not properly evaluated and message variables 1â€“3 were not working.
New: Added an option to enable or disable TLS for MariaDB connections on the operator screen in the button function used for reading job data from the database.
Change: Updated MSSQL connectors to trust DB serve certificate.
Fix: Fixed issue in Modbus protocol where debug messages were sometimes not populated.
Fix: Fixed issue where making a copy of the selected operator screen copied the last operator screen from the list instead. (S28656)
New: Added an On-Screen Numeric Keypad for operator screens.
Fix: Fixed an issue where the input field on the Operator screen could lose focus.
Fix: Fixed wrong title in Setup UI for Switches.
Change: Updated Excel export so that Microsoft Excel is no longer required on the server.
New: Advanced filter extended about M00, M01, M30 instructions.
New: Added official support for Microsoft Entra ID as a login module.

CIMCO NC-Base 2026.01.08

Fix: Fixed issue where users were not saved after a fresh install until the DNC server was started.
New: Added official support for Microsoft Entra ID as a login module.

CIMCO Software Manager 2026.01.08

Fix: Fixed several issues related to stability and error handling & NC-Base web clients now correctly consume a NC-Base client license instead of a DNC-Max client license.

CIMCO Software 2026.01.07 Freigegeben: 06-05-26Register to download

Änderungen gegenüber der Vorgängerversion:

CIMCO Edit 2026.01.07

Fix: Centroid milling RPost: M25.
Fix: Siemens turning reverse post: SUPA, G53.
Fix: An issue where stopping conditions could would rewind/stop at before the initial play position.
Fix: Presentation viewer initially highlighting line 1.
Fix: Collision detection progress bar sometimes appearing when it shouldn't.
Fix: Centroid reverse posts: added #29000-31999 variables.
Fix: An issue where changing theme corrupted stock compare colors.
New: Millplus milling reverse post. (S23277)
New: New real-time based simulation animation speed slider.
Fix: Tool manager: Thread mill shape.
Fix: Reverse post: wrong tool rotation angles in some cases.
Fix: Reverse post: crash in radius compensation in some cases.
Fix: Black screenshot in simulation bundles.
New: Added gage point to custom lathe holders.
Fix: Fagor reverse posts: #MCS ON/OFF.
Fix: Heidenhain reverse posts: CYCL DEF 19.
Fix: Fanuc milling reverse post: system variables #2000-2399, #10001-10999, #11001-#11999, #13001-13999.
Fix: Arc interpolation regression.
Fix: Stock removal when turning with C180.
Fix: Fanuc turning reverse posts: #3000.
Fix: Fanuc turning reverse post: linear angle issue.

CIMCO MDC-Max 2026.01.07

Fix: Fixed issue with opening mdc config on fresh install before DNC server has been started.
Fix: Fixed issue with reconnecting custom data paths in the Heidenhain protocol after the CNC connection was lost.
Fix: Fixed issue with NCBaseUpgrade causing rebuild errors in MDC-Max.
New: Web Client: When opening an operator screen, the first barcode input field will now be automatically focused.
New: Web Client: Added OEE Widget and data transformation to the historical dashboard.
Fix: Web Client: Restricting access to the subscreen in the operator screen will now block access.

CIMCO NC-Base 2026.01.07

Fix: Fixed issue saving editor file type.

CIMCO Software 2026.01.06 Freigegeben: 29-04-26Register to download

Änderungen gegenüber der Vorgängerversion:

CIMCO Edit 2026.01.06

Fix: Reverse post: macro programs issue.
Fix: Fanuc turning reverse post: drilling cycle R parameter is absolute/incremental depending on G90/G91 activated. (S28324)
Fix: Mazak milling reverse post: Tool length compensation activation control setting. (S28398)
Fix: An issue where special characters in tool comments and files names were sometimes corrupted.
New: Added turning sample file demonstrating stock flip and split stock.

CIMCO DNC-Max 2026.01.06

Fix: Fixed issues with being able to start ports without license if they were high in the port list.
Fix: Fixed issue introduced in 2026.01.03/04 regarding license counting.

CIMCO MDC-Max 2026.01.06

Fix: Web Client: Fixed issue where the MDC-Max web client was unable to start when the Historical Dashboard config was empty.
Fix: Fixed an issue with HTML report settings where the UI behaved incorrectly.

CIMCO NC-Base 2026.01.06

New: Web Client: Added custom search in code preview (Ctrl+F).

CIMCO Software 2026.01.05 Freigegeben: 27-04-26Register to download

Änderungen gegenüber der Vorgängerversion:

CIMCO Edit 2026.01.05

Fix: Mazak SmoothAi reverse posts: M98H.
Fix: Siemens milling reverse post: OFFN.
Fix: Fanuc turning reverse posts: missing variables.
Fix: Reverse post: radius compensation issue in mill-turn.
Fix: Heidenhain reverse posts: PLANE RESET STAY.

CIMCO DNC-Max 2026.01.05

Fix: Web Client: Fixed issue with showing wrong folder in split window.

CIMCO MDC-Max 2026.01.05

Fix: Web Client: Button indicators on the operator screen now works when a button is disabled.

CIMCO NC-Base 2026.01.05

Fix: Fixed broken add new editor file type button under Machines > Templates & fixed saving issues of the file type.

CIMCO Software 2026.01.04 Freigegeben: 23-04-26Register to download

Änderungen gegenüber der Vorgängerversion:

CIMCO Edit 2026.01.04

Fix: Reverse post: spiral and conical arcs issue.
Fix: Mazak reverse posts: #3020 variable.
Fix: Fanuc turning reverse post: G73.
Fix: Fanuc milling reverse post: WCS Expansion option.
Fix: Legacy APT reverse post: MULTAX.
New: Collision detection between machine models and in-process stock.
Fix: Heidenhain reverse post: PLANE RESET TURN.
Fix: Siemens reverse posts: $P_TOOLL.
Fix: Heidenhain reverse posts: cycle 17.0 feed rate issue.

CIMCO DNC-Max 2026.01.04

Fix: Fixed an issue where DNC-Max Client would not restore to previous window size and position on open. (S27792)
Change: Implemented a rename function in the split window for Windows Agent.
Fix: Fixed an issue where the Windows Agent copied a program with an empty file name when sending was initiated from NC-Base with file extension renaming enabled.
Fix: Fixed an issue where sending via CIMCO Windows Agent initiated by NC-Base ended up with an error.
New: Web Client: Browsing of additional directories in send/split window is now possible.
New: Web Client: Added delete button to DNC split screen.
Fix: Fixed issue with infinite loop of port directory update.

CIMCO MDC-Max 2026.01.04

Fix: Fixed not working telemetry data lifetime.

CIMCO NC-Base 2026.01.04

New: Web Client: Now possible to upload program to auto import folder.
New: Added a new NC Event 'PROGRAM_UPDATED' in the Execute module.
Fix: Fixed an issue with MSSQL where the Execute module setup could not be saved.

CIMCO Software 2026.01.03 Freigegeben: 16-04-26Register to download

Änderungen gegenüber der Vorgängerversion:

CIMCO Software 2026.01.03

Änderung: Aktualisierte portugiesische Übersetzungen.

CIMCO Edit 2026.01.03

Fix: Fixed unlocalized file type template names in 'Add new file type' dialog. (S28405)
Fix: Fanuc Turning STARGB reverse post extension: G910, G69.1.
Fix: Missing control settings localization in Haas and Mitsubishi turning reverse posts. (S28236)
Fix: Reverse post: G10L2P0.
Fix: Fanuc turning reverse posts: drilling axis issue. (S28324)
Fix: File open dialog for DXF shows "Open STL File"
Fix: Reverse post: cylindrical interpolation regression.
Fix: Spindle to stock collision reporting issue when the spindle model was in inches.
Fix: False positive stock/holder collisions when turning on stock STL.
New: Added Clamp/unclamp time settings.
New: Advanced Chuck Jaw setup.
Fix: Okuma milling reverse post: G283/284.
Fix: Siemens turning reverse post: TRANSMIT_S.
Fix: Siemens reverse posts: G500 fix caused regression.
Fix: Better simulation robustness on Intel Integrated Graphics.
Fix: Stock compare update when changing workpiece.
Fix: Collision detection issues when multiple workpieces or fixtures.
Fix: Issue where hiding workpiece could pause simulation.
Fix: Toolpath vectors only showing for half the toolpath.
Fix: A circumstantial freeze when closing Backplot.
Fix: Reverse post: diameter programming issue for variables.
Fix: Centroid milling reverse post: M98, M25.
Fix: Centroid reverse post: system variables support. (S26828)
Fix: Machine configuration.
New: Statistics can show graph for selected tools. (S27148)
New: Default view can now be changed in the machine configuration editor.
New: Now bundles external sub programs in simulation bundles.
New: Support vertical milling extenders.

CIMCO DNC-Max 2026.01.03

Fix: Fixed potential crashes from clicking links in log.
New: Added support for Windows 95 in the CIMCO Windows Agent.

CIMCO MDC-Max 2026.01.03

Fix: MTConnect updated alarms.
New: Added message variable to the advanced filter.
Change: Updated Haas Serial Monitor to Generate MONONLINE / MONOFFLINE when machine doesn't respond in a given time (command time out).
New: MTConnect: added option to calculate SOVR from cmd spindle speed and actual spindle speed.

CIMCO NC-Base 2026.01.03

Change: Added option to revert NC program status to "Run-In".
Fix: Web Client: Fixed an issue with file preview that caused certain text files to load incorrectly.
Fix: Web client: Fixed issue with file transfer when running a MSSQL Server.

CIMCO Software 2026.01.02 Freigegeben: 23-03-26Register to download

Änderungen gegenüber der Vorgängerversion:

CIMCO Edit 2026.01.02

Fix: Mazak milling reverse posts: G68, G68.2.
Fix: Siemens reverse posts: D+SUPA command issue.
New: Add Keep decimals, Strip leading zeros and Strip trailing zeros options to Adjust Feedrate and Adjust Spindle Speed dialogs. (S27518)
Fix: Reverse post: home position units issue.
Fix: Stock simulation issue when C not zero.
Fix: arc scanning issue.
Fix: An issue where 'remove chips' sometimes removed the wrong piece.
New: Tool visibility state is now remembered.
Fix: Remove chips sometimes removing too much material after parting off.
Fix: Tool mounts missing in simulation bundles.
Fix: False positive collisions in turning.
Fix: An issue where going to end would not always update stock.
New: Memory optimizations.
New: Better STL repair for stock compare.
Fix: Haas milling reverse post: P9817/9818.
Fix: Okuma milling reverse post: VRSTT, VZOF*, fixed issue with labels.
Fix: Loading of stock from STL when paths contain Chinese characters.
Fix: Multi Channel: Fixed an issue where the configured Channel Order was not always preserved. (S28040)
Fix: Siemens milling reverse post: G500.
Fix: Mazak Integrex reverse post: M211.
Fix: Siemens turning reverse post: CYCLE800. (S28020)
Fix: Turning when work origin not on rotation axis.
Fix: Orientation of turning tools when turning on horizontal mills.
New: Automatically selects the Backplot tab when launching directly into simulation from CAM integrations.
Fix: Centroid milling reverse post: G43.3, G43.4 display tool position issue. (S26828)
Fix: Machine home position when in inches.
Fix: Corrupt stock when using remove chips with stock compare.
Fix: Reverse post: radius compensation issue.
Fix: NC code missing from .CimcoSimData when exporting simulation bundle.
New: Improved stock model collision detection.
Fix: Heidenhain reverse posts: M130.

CIMCO DNC-Max 2026.01.02

New: Added check of validity of key & cert to startup of webserver.
Change: Updated error handling of program receive over FOCAS.
Change: Moved WEB API & Startup banner to Server Config -> Advanced setup sheet.
Change: Added additional translations to the DNC-Max web client.
Change: Updated web server command-line parameters to ensure a default connection is always available.
Change: Moved settings "Allow users to re-start ports" and "Allow users to send 'Local Files'" from the clients to the server.

CIMCO MDC-Max 2026.01.02

Fix: Web Client: Added multiselect capabilities to the downtime list for bulk resolving downtimes.
Fix: Implemented missing feature 'Value store mode' for variables job and program. (S28058)
Fix: Fixed issue with counters and timers not being correct in rolling timelines.
Fix: Web Client: Fixed an issue causing screens to sometimes not load correctly on page reload.
Fix: Fixed an issue when TEXT[EXCELVARx] didn't work in a text comparison condition e.g.: TEXT[JOB]<>TEXT[EXCELVAR1]. (S22730)
Fix: Fixed an issue where MDC expressions related to schedule (TIME[ISHIFTSTART], TIME[ISHIFTEND], TIME[SHIFTSTART], ...) did not work correctly.
Change: Added additional translations to the MDC-Max web client.

CIMCO NC-Base 2026.01.02

Fix: Fixed MariaDB 11.8.5 startup issue on Windows Server 2016 by including required ICU DLLs in the installation. (S28095)
New: Added new option 'Don't allow programs to be overwritten when 'Approved'.

CIMCO Software 2026.01.01 Freigegeben: 09-03-26Register to download

Änderungen gegenüber der Vorgängerversion:

CIMCO Edit 2026.01.01

Fix: Spindle mount collision detection.
Fix: Spindle mount scaling when in inches.
Fix: Fanuc milling reverse post: G68.
New: Command line (--savebundle path) for saving simulation bundle.
Fix: Reverse post: fixed not updating some of linked variables.
Fix: An issue where jumping to limit over-travel would highlight NC line 0.
Fix: Remove chips when on sub spindle.
Fix: Default mounting on cross turning tools with round shank.
Fix: Tool colors setting not loading correctly when starting CIMCO Edit.

CIMCO DNC-Max 2026.01.01

Fix: Added Additional Directories for Network Monitor Ports.
Fix: Fixed Fanuc focas1 send function.
Fix: Fixed issue with drip-feeding when Dripfeed file resume is enabled. (S27790)
Fix: Web Client: User logins are now added to the NC-Base system log for all web client types.
Fix: Web Client: Fixed issue causing web clients to not correctly detect mobile layouts.
New: Web Client: Split screen will now show "Date Modified" for files.
Fix: Update Telnet SSL communication loop to better handle SSL handshake.
Fix: Multihead machines (Fanuc Focas) which utilize extensions to determine sending directories now consider upper- and lower-case versions of extensions to be the same.
Fix: Fixed SSH protocol when working with non-ASCII file names.
New: Web Client: Added machine log to split screen.
New: Web Client: It is now possible to sort files by name or modified date in split screen.
New: Web Client: Added search filter to split screen.
New: Web Client: It is now possible to rename files from the split screen.

CIMCO MDC-Max 2026.01.01

Fix: Web Client: Auto scroll will now scroll to top of page if only one slide is in slideshow.
New: Web Client: Added indicator on historical widget when an evaluation has failed.
Fix: Web Client: Added status information to the shopfloor and made font sizes more dynamic. Font sizes can now be overwritten.
Fix: Fixed hang when editing schedule configuration. (S27762)
Fix: It is now possible to auto close a sub-screen in the web client when an input field is submitted.
Fix: Correctly log user logout when the client is closed.
Change: Added UI option to configure connection and response timeouts for the SMTP notification interface.
New: Web Client: Added dynamic zoom to timelines in historical dashboards.
New: Web Client: Added legend to shopfloor.
Change: Updated Heidenhain protocol to support a secure connection.
New: Web Client: Added drilldown functionality to charts in Historical Dashboards.
New: It is now possible to configure schedules to start on Sunday.
New: Web Client: Value widgets in Historical Dashboards can now have color ranges.

CIMCO NC-Base 2026.01.01

Fix: Fixed an issue with "Leave copy of program file" option being greyed out when adding a new program.
Fix: Fixed issue with blank string in field folders drop down menu.
Fix: Correctly log user logout in NC-Base when the editor is closed.
Fix: Fixed a rare crash when viewing files with extremely long paths and containing '.' as part of the name (other than the .ext).
Fix: Updated database field partnumber from VARCHAR 100 -> text.
New: Web Client: Users can now print text and image files directly.
New: Web Client: Added zoom to the image preview via mouse or touch gestures.
Fix: Allow 'Part number' to have a max length up to 256 instead of 100.
Fix: Fixed an issue that caused program file extensions in some cases to be doubled.
Change: Updated MariaDB to version 11.8.5.
New: Added preview of Office documents (Word, Excel, PowerPoint).