Protocol

LSV-2 TCP/IP

Check this field to send files to Heidenhain TNC controls using LSV-2 over TCP/IP.

This requires that port 19000 is open in network firewalls.

Fanuc FOCAS

Check this field to send file using Fanuc FOCAS

Limit to FOCAS 1

Check this field to limit the functionality for the Fanuc FOCAS protocol to FOCAS 1 features, enabling Fanuc FOCAS transfer to older controls.

FTP client (requires CNC controls with an FTP server)

Check field to send files to the control using an FTP connection.

Disable the 'Send File' option to enable this feature.

requires CNC controls with an FTP server.

CNC Hostname / IP address

Use this field to specify the name or IP address of the CNC control.

Rename Using

Use this field to specify if the file should be renamed when sent using LSV2, Fanuc FOCAS or FTP protocol.

If the file is not in the NC-Base, the file will not be renamed if a database field is chosen.

Trigger

Specify a trigger here to use when renaming files.

Replace with

Replace the rename trigger with this field.

FTP Client

User name

Use this field to specify the FTP username.

Password

Use this field to specify the FTP password.

File name mode

Use this field if files should always be stored on the control using the O-Number

Extension

Use this field to specify the extension that should be used when saving files on the control.

Allowed extensions

Use this field to specify allowed file extensions.

Only files with these extensions will be seen in FTP window.

You can specify more extensions: "NC,SPF,MPF"

To allow all files without an extension specify a comma at the start.

Send using 'Passive' mode

Check this field to transfer files in passive mode.

Delete existing file

Check this field to delete and existing file on the control with the same name before sending the file.

Send in ASCII mode

Check this field to send files in ASCII mode.

If not checked, files will be sent in binary mode.

Add '%' lines when splitting

Check this field if % characters should be added at the start/end of sub-program files.

Split sub-prgs into separate files

Check this field to extract sub-programs from the transmitted file and store them separately.

Synchronize FTP directory with $INCOMING

Check this field to automatically synchronize $INCOMING directory with a directory on FTP.

Directory to synchronize $INCOMING with must be specified below.

Synchronization happens with the Scan interval specified in Directory Scan.

Synchronize subfolders

Check this field to synchronize subfolders recursively.

All Excluded Directories and any corresponding directories in the FTP folder will be omitted.