Network I/O

Network I/O modules

Network I/O dialog

param

Enable Network I/O modules

Check this field to enable support for network I/O servers like the Moxa E2210/E1200.

param

Log device info

Use this field to specify what information should be logged in the port log.

param

Input Type

Use this field to specify the input type.

param

Message (low)

Use this field to specify the message that should be generated when a switch is changed to the low state.

param

Message (high/pushed)

Use this field to specify the message that should be generated when a push button is activated, or a switch is changed to the high state.

param

Minimum cycle time (secs.)

Use this field to specify the minimum cycle time for a 'switch channel'. The minimum cycle time, is the time that the channel must remain in a state before a message is generated.

param

Min time (High->Low)(sec)

param

Log message when device starts

Check this field if the current state of the push button should be logged when the network device comes on-line.

param

Port

Use this field to specify the port that this channel should generate a message for.

param

Minimum pulse count

Use this field to specify the minimum number of pulses. Every transition of the signal is counted as a pulse.

param

Time frame (ms) in which min. pulse cnt has to be reached

Use this field to specify the maximum pulse length.

param

Message (pulse)

Use this field to specify the message that should be generated when is pulsing.