Simulación

This section describes the Backplot functions in the Editor Ribbon.

El simulador 3D/2D opcional en CIMCO Edit v7 es usado para la simulación de programas CNC. Los parámetros de configuración de la simulación son accesibles a través de los iconos o .

The graphical backplotter shows the toolpath for milling and turning operations. You can simulate NC programs for Milling operations using wireframe or solid view, as well as solid animation. For Turning operations, you can use wireframe simulation and solid animation.

The solid animation visualizes the manufacturing process of the piece. The simulation allows you to observe the stock being removed by the tool, and thus get a complete and intuitive visualization of the toolpath.

Within the Backplot tab, you can select either Backplot Window or Solid Animation. In the Backplot Window the toolpath is visualized as a wireframe, and a Solid Model of the workpiece can be created. In Solid Animation, the operations are visualized on a material block and show the manufacturing process. You cannot toggle between Backplot Window and Solid Animation during the dynamic simulation.

In Backplot mode, the NC program is displayed in the left pane of the window, while the plot is shown in the right pane. You can stop and restart the simulation, control the speed and direction of the tool movement, etc.

Durante la simulación dinámica, una barra gris muestra en el programa CNC qué bloque está siendo procesado. Puede utilizar 'Simular archivo' para hacer que la simulación gráfica ocupe toda la ventana sin mostrar el programa. También puede realizar saltos a través del código CN con las funciones Saltar al siguiente movimiento, Saltar al siguiente pase de corte, Saltar al siguiente plano Z y Saltar a la siguiente herramienta.

Las funciones dinámicas de zoom, encuadre, rotación y medición pueden ser utilizadas para analizar el modelo.

You need a backplot enabled license key to use this function.