Shut Down CNC

Check List

Buttons

1

Remove tool from spindle:

  • Enter the number of an empty tool carousel.
  • Select ATC FWD

2

Jog Machine to Safe Area:

  • Select Jog

3

Shut Down Button: Press

Post Power-Down Checklist:

  • Wipe spindle with a soft clean rag to remove coolant and prevent rusting.
  • Put away tools.
  • Clean up work area.
  • Always leave the machine, tools, and equipment in the same or better condition than when you found them.

Note: It is important to clean the machine after each use to prevent corrosion, promote a safe work environment, and as a professional courtesy to others. Allow at least 15-30 minutes at the end of each day for cleaning. At the very least, put away all unused tools and tooling, wash down the machine with coolant, remove standing coolant from the table, and run the chip conveyor.