CIMCO Edit 2024 Releases

CIMCO Edit 2024.01.13 PreviewReleased: 23-05-24Register to download
Changes since previous version:
CIMCO Edit 2024.01.13
  • Fix: Siemens milling reverse post: Tool length compensation and rotary axes positions. (S21404)
  • Fix: Workpiece/Fixture collisions not reported after toggling visibility of machine models.
  • Fix: Fanuc Milling reverse post: G12.1 support. (S17947)
  • New: Added 3DConnexion support.
  • New: Added Show/Hide Tool to presentation viewer.
  • New: Added View Reset to presentation viewer.
  • New: Added a hint for NVidia and AMD GPUs to be used by default when starting presentation viewer.
  • Fix: An issue where stock simplification didn't simplify the entire mesh.
  • Fix: Dimples when importing certain STL files as stock.
  • Fix: Reverse post: G80 cancels G81/89 if commanded in the same line. (S14319)
  • Fix: Milling reverse posts: Added "Top of Z limit" option for "Machine start position" setting. (S21301)
  • Fix: Okuma milling reverse post: G81/G84 wrong retract issue.
  • Fix: Heidenhain reverse post: CYCL DEF 7 issue. (S21260)
  • Fix: Heidenhain reverse post: FN 17: SYSWRITE ID502 support.
  • Fix: Fixed clipped macro description text in Insert Macro dialog.
  • Fix: Siemens Milling reverse post: polar programming support. (S21065)
CIMCO Edit 2024.01.12 PreviewReleased: 13-05-24Register to download
Changes since previous version:
CIMCO Edit 2024.01.12
  • New: Added Heidenhain ISO Milling reverse post.
  • Fix: A regression where collision checking would hang.
  • Fix: Reverse post: zero offset function (G52). (S21270)
  • New: Added Zoom window to presentation viewer.
  • New: Added Cross section to presentation viewer.
CIMCO Edit 2024.01.11 PreviewReleased: 08-05-24Register to download
Changes since previous version:
CIMCO Edit 2024.01.11
  • Fix: Okuma milling reverse post: G81 retract issue. (S21265)
  • Fix: Reverse post: Showing last commanded tool when portion of G-code is selected. (S21156)
CIMCO Edit 2024.01.10 PreviewReleased: 07-05-24Register to download
Changes since previous version:
CIMCO Edit 2024.01.10
  • No changes in this version. Released as part of CIMCO Software version 2024.01.10
CIMCO Edit 2024.01.09 PreviewReleased: 03-05-24Register to download
Changes since previous version:
CIMCO Edit 2024.01.09
  • Fix: Reverse post subprogram file search in some cases when file name is specified without extension.
  • Fix: Fanuc milling reverse post: U/V/W collinear axes support. M98Q support.
  • New: Stopped spindle to stock now has 3 modes and default is to cut the stock normally.
  • Fix: Haas Milling reverse posts: L0 command handling.
CIMCO Edit 2024.01.08 PreviewReleased: 30-04-24
Changes since previous version:
CIMCO Edit 2024.01.08
  • Fix: An issue where Save Presentation didn't save the view correctly when backplotting turning programs.
  • Fix: An issue where auto suggest didn't show the suggestion when the list contained only 1 item.
  • Fix: An issue where workpiece and fixture didn't load from scanned geometries with backplot file.
  • Fix: An issue where weird geometry could be generated for certain tools.
  • Fix: Toolpath statistics issue when in inch mode. (S20960)
  • Fix: An issue where the backplot rendering area would be wrong for certain drivers when not in NVidia GDI compatible mode and windows scaling was not 100%
  • New: Backplot now renders in high resolution when using windows scaling.
CIMCO Edit 2024.01.07 PreviewReleased: 22-04-24
Changes since previous version:
CIMCO Edit 2024.01.07
  • Fix: An issue where there could be false positive stock/holder collisions.
  • Fix: Brother reverse post: subprogram call issues with G65 and M98H. (S21113)
  • Fix: Heidenhain reverse post: cycle 411 issue. (S21080)
  • Fix: Brother milling reverse post G81, G85, G77, G78. (S21113)
  • Fix: Okuma milling reverse post: G81 retract value and G30 reference position. (S21105)
  • Fix: Tool path statistics min Z value. (S20960)
  • Fix: Reverse post: Tool center point control issue producing wrong linear move.
  • Fix: Hurco milling reverse post G68.2 command.
CIMCO Edit 2024.01.06 PreviewReleased: 16-04-24
Changes since previous version:
CIMCO Edit 2024.01.06
  • Fix: Added "shortest" rotary axis positioning setting to all turning reverse posts that support mill-turn.
  • Fix: Siemens milling reverse post cycles 976/979. (S21017)
  • Fix: An issue where measure distance information overlapped with toolpath information when windows scaling was not 100%.
  • Fix: An issue where solid simulation did not work with Intel integrated graphics cards.
  • New: Machine builder geometry mounting options added to linear table axes.
  • Fix: An issue where some stl geometries with special characters in the path failed to load.
  • Fix: An issue where some turning moves would make corrupt cuts.
CIMCO Edit 2024.01.05 PreviewReleased: 08-04-24
Changes since previous version:
CIMCO Edit 2024.01.05
  • New: Improved stock simulation accuracy of 5 axis ball mill tools.
  • New: Machine builder automatically sets rotation axis direction from axis letter.
  • New: Optimized stock simplification.
  • Fix: Fixed wrong rotations in some cases when applying positive/negative tilt setting. (S20917)
  • Fix: Reverse post: supported comments before value/assignment when defining variable. (S18145)
  • Fix: Heidenhain reverse post: added "Map letters" setting.
  • New: Stand-alone simulation mode can now toggle stock compare.
  • Fix: An issue where some turning tools would cut more material that intended in stock simulation.
  • Fix: A stock issue, where corners were sometimes chamfered off during simplification.
  • Fix: An issue where very certain helical arcs would become invalid.
  • Fix: Siemens probing cycle 977 rib measuring direction issue. (S20871)
  • Fix: Okuma Turning reverse post: "A" angle value support in G0/G1. (S20858)
  • Fix: Hurco reverse post: Set tool number max value to 999. (S20845)
  • Fix: Reverse post: issue with applying default works offset when no work offset calls in the program.
  • Fix: An issue where stock STL export would also be in millimeters.
CIMCO Edit 2024.01.04 PreviewReleased: 20-03-24
Changes since previous version:
CIMCO Edit 2024.01.04
  • Fix: SolidWorks keyboard mapping in fast simulation mode. (S18735)
  • Fix: Siemens milling reverse post: supported cycles SLOT1, SLOT2. (S18959)
  • Fix: Heidenhain reverse post: CYCL 414 measuring direction. (S20774)
  • Fix: Siemens milling reverse post: added LONGHOLE cycle support. (S18959)
CIMCO Edit 2024.01.03 PreviewReleased: 18-03-24
Changes since previous version:
CIMCO Edit 2024.01.03
  • Fix: Rotary axis mode not setting correctly in some cases. (S20747)
  • Fix: Okuma reverse post: subprogram calls by number.
  • Fix: Heidenhain reverse post: approach point in cycle 409.
  • Fix: Heidenhain reverse post: Supported cycles 230, 231, 232. (S14296)
  • Fix: Fagor Turning reverse post: Supported J value in G68. (S20106)
  • New: Hidden model collisions can now be turned ON/OFF.
  • New: Tool/Workpiece collisions can now be checked during rapid moves only in collision report.
CIMCO Edit 2024.01.02 PreviewReleased: 11-03-24
Changes since previous version:
CIMCO Edit 2024.01.02
  • New: Presentation mode. Export the current simulation to a file to be opened as a stand-alone simulation.
  • New: Tool Setup: Milling assemblies can now be set to a 270 deg. orientation.
  • Fix: An issue where custom tools by name in tool scanning would not work if the name contained white-spaces.
  • Fix: An issue where integration tool exports work origin would sometimes not be imported correctly when in inches.
  • New: Toolpath statistics graph: Showing information tooltip for selected point. Using "arrow" keyboard buttons for scrolling zoomed graph. (S17883)
  • New: Okuma Milling reverse post: Renishaw probing cycles support.
CIMCO Edit 2024.01.01 PreviewReleased: 04-03-24
Changes since previous version:
CIMCO Edit 2024.01.01
  • Fix: An issue where rotational axis limits converted to MM when the machine was defined in inches.
  • Fix: Fanuc milling reverse post: G15/16 command support. (S20102)
  • New: Renishaw probing cycles support for Haas and Mazak milling reverse posts.
  • New: Fanuc Milling reverse post: Renishaw probing cycles support.
  • Fix: An issue where transparency didn't work in standard Backplot.
  • Fix: Roeders reverse post: Supported ".sub" program file extension.
  • New: Reduced stl export file sizes.