CIMCO Software 4 Releases

CIMCO Software 4.40.11 PreviewReleased: 13-01-06Register to download
Changes in CIMCO DNC-Max 4.40.11
  • Added option to enable allow files with spaces in the Heidenhain FE mode protocol directory listing. Ref: Setup/Configure Port/General Options/ Allow spaces in directory listing
CIMCO Software 4.40.10 PreviewReleased: 05-12-05
Changes in CIMCO DNC-Max 4.40.10
  • Added option to auto receive/remote request ISO files from the current disk directory in the Mazak protocol.
CIMCO Software 4.40.09 PreviewReleased: 03-11-05
Changes in CIMCO DNC-Max 4.40.09
  • Updated support for transferring log files in the Heidenhain FE protocol.
CIMCO Software 4.40.08 PreviewReleased: 03-04-05
Changes in CIMCO Edit 4.40.08
  • OEM Feature upgrade.
Changes in CIMCO DNC-Max 4.40.08
  • Added support for transferring system log files in the Heidenhain FE protocol.
CIMCO Software 4.40.07 PreviewReleased: 02-28-05
Changes in CIMCO DNC-Max 4.40.07
  • Added support for receiving multiple programs in binary mode.
  • Fixed incorrect print message.
CIMCO Software 4.40.06 PreviewReleased: 02-17-05
Changes in CIMCO DNC-Max 4.40.06
  • Fixed problem when remote restarting from a tool change.
CIMCO Software 4.40.05 PreviewReleased: 02-05-05
Changes in CIMCO Edit 4.40.05
  • Updated NC-Base.
Changes in CIMCO DNC-Max 4.40.05
  • Fixed crash when exporting programs from the Mazak protocol to NC-Base.
CIMCO Software 4.40.04 PreviewReleased: 02-02-05
Changes in CIMCO Edit 4.40.04
  • Updated NC-Base.
Changes in CIMCO DNC-Max 4.40.04
  • Updated NC-Base.
CIMCO Software 4.40.03 PreviewReleased: 01-19-05
Changes in CIMCO Edit 4.40.03
  • Fixed system crash when running Norton/Symantec.
Changes in CIMCO DNC-Max 4.40.03
  • Fixed system crash when running Norton/Symantec.
CIMCO Software 4.40.02 PreviewReleased: 01-16-05
Changes in CIMCO DNC-Max 4.40.02
  • Fixed problem with the sub-program option in the standard protocol.
CIMCO Software 4.40.01 PreviewReleased: 01-09-05
Changes in CIMCO DNC-Max 4.40.01
  • Fixed continuous 'Port ping failed' log problem.
CIMCO Software 4.33.46 PreviewReleased: 11-16-04
Changes in CIMCO DNC-Max 4.33.46
  • Fixed problem using the file operations in the directory monitor protocol.
CIMCO Software 4.33.45 PreviewReleased: 11-16-04
Changes in CIMCO DNC-Max 4.33.45
  • Fixed problem with the strip comment option in the Mazak protocol.
  • Added Mazak auto mount option (hidden).
  • Added Mazak "Save ISO files in disk dir option" (hidden).
CIMCO Software 4.33.44 PreviewReleased: 10-28-04
Changes in CIMCO DNC-Max 4.33.44
  • Fixed problem sending parameter data with the Fanuc FAPT protocol.
  • Fixed Mazak protocol problem saving last line in ISO programs, if % was at the end of the line.
CIMCO Software 4.33.43 PreviewReleased: 10-15-04
Changes in CIMCO DNC-Max 4.33.43
  • Fixed problem with the tracking feature, when aborting a transmission.
CIMCO Software 4.33.42 PreviewReleased: 10-14-04
Changes in CIMCO Edit 4.33.42
  • Fixed problem using the Editor DNC with NC-Base.
Changes in CIMCO DNC-Max 4.33.42
  • Changed remote print request to ignore request if program tracking rejected requested program.
  • Changed max comment length to 32 characters for Mazak M64 controls.
CIMCO Software 4.33.41 PreviewReleased: 09-27-04
Changes in CIMCO DNC-Max 4.33.41
  • Fixed problem ignoring programs during multi program reception.
CIMCO Software 4.33.40 PreviewReleased: 09-24-04
Changes in CIMCO DNC-Max 4.33.40
  • Fixed problem auto importing a large number of programs into NC-Base.
CIMCO Software 4.33.39 PreviewReleased: 09-19-04
Changes in CIMCO Edit 4.33.39
  • Added option to copy received file to the clipboard.
Changes in CIMCO DNC-Max 4.33.39
  • Added option to prevent requesting a new program, before previously requested program has been saved. Ref: Port/Configure Port/Remote request/Set/Other settings/ Track transmitted program
CIMCO Software 4.33.38 PreviewReleased: 08-25-04
Changes in CIMCO DNC-Max 4.33.38
  • Added support for filtering ISO probe data in the Mazak protocol.
CIMCO Software 4.33.37 PreviewReleased: 08-24-04
Changes in CIMCO Edit 4.33.37
  • Fixed problem with some keyfiles not including the 2D backplot module.
CIMCO Software 4.33.36 PreviewReleased: 08-23-04
Changes in CIMCO DNC-Max 4.33.36
  • Updated Mazak protocol to allow a directory specification in the program name, saving (DIR/PRG) as DIR/PRG.NC.
  • Fixed problem saving ISO programs in the Mazak protocol using the program comment, when the comment was not on the same line as the program number.
CIMCO Software 4.33.35 PreviewReleased: 08-11-04
Changes in CIMCO Edit 4.33.35
  • Fixed problem with 'Insert Spaces' in macro calls using #.
CIMCO Software 4.33.34 PreviewReleased: 08-09-04
Changes in CIMCO DNC-Max 4.33.34
  • Added 'Max port close time' option. Ref: Port/Configure Port/Serial Device/Max port close time
CIMCO Software 4.33.33 PreviewReleased: 07-15-04
Changes in CIMCO Edit 4.33.33
  • Fixed problem plotting some cycles.
CIMCO Software 4.33.32 PreviewReleased: 07-12-04
Changes in CIMCO DNC-Max 4.33.32
  • Added 'Send from O-number' option in the Mazatrol protocol.
CIMCO Software 4.33.31 PreviewReleased: 06-25-04
Changes in CIMCO Edit 4.33.31
  • Fixed problem previewing some files in the NC-Base client.
Changes in CIMCO DNC-Max 4.33.31
  • Updated NC-Base link.
CIMCO Software 4.33.30 PreviewReleased: 06-21-04
Changes in CIMCO Edit 4.33.30
  • Fixed crash in backplot.
Changes in CIMCO DNC-Max 4.33.30
  • Fixed problem sending some files with strange linefeed characters.
CIMCO Software 4.33.29 PreviewReleased: 06-02-04
Changes in CIMCO Edit 4.33.29
  • Fixed problem auto-detecting Czech and Chinese.
Changes in CIMCO DNC-Max 4.33.29
  • Fixed problem auto-detecting Czech and Chinese.
CIMCO Software 4.33.28 PreviewReleased: 06-02-04
Changes in CIMCO Edit 4.33.28
  • NC-Base update.
Changes in CIMCO DNC-Max 4.33.28
  • Fixed problem with adding programs to the database in some cases.
CIMCO Software 4.33.27 PreviewReleased: 06-01-04
Changes in CIMCO Edit 4.33.27
  • Fixed 2D backplot crash.
Changes in CIMCO DNC-Max 4.33.27
  • Fixed problem with start/end of loop triggers.
CIMCO Software 4.33.26 PreviewReleased: 05-27-04
Changes in CIMCO Edit 4.33.26
  • Updated backplot cycle support.
Changes in CIMCO DNC-Max 4.33.26
  • Updated Mazak protocol to use the 'Allow sub-directory change' when auto receiving.
CIMCO Software 4.33.25 PreviewReleased: 05-24-04
Changes in CIMCO DNC-Max 4.33.25
  • Fixed problem with the Heidenhain FE mode option 'Insert filename after 'BEGIN PGM'' (again).
CIMCO Software 4.33.24 PreviewReleased: 05-11-04
Changes in CIMCO DNC-Max 4.33.24
  • Added support for Mazak M64M (640M Pro) and T64M (640MT Pro).
  • Fixed problem specifying maximum comment length for Mazak T64 controls.
  • Fixed problem transferring CMT data after ISO data in the Mazak protocol.
  • Fixed problem with the Heidenhain FE mode option 'Insert filename after 'BEGIN PGM'' when no program name was specified.
CIMCO Software 4.33.23 PreviewReleased: 04-25-04
Changes in CIMCO DNC-Max 4.33.23
  • Added support for using multiple remote request programs to request directory + program, or using a path delimiter in Mazak Mazatrol remote requests.
  • Added support for transmitting both ISO and Hurco files, and remote request Hurco programs (using an ISO request program).
CIMCO Software 4.33.22 PreviewReleased: 04-12-04
Changes in CIMCO Edit 4.33.22
  • Added option to leave files when deleting programs. Ref: Database/Setup/Server Settings/Delete leave files
  • Fixed problem with the NC-Base "Keep how many backups" option.
Changes in CIMCO DNC-Max 4.33.22
  • Added option to create directory requested with Heidenhain FE mode remote directory change programs. Ref: Port/Configure Port/Advanced Settings/Create directory
  • Fixed problem receiving tool/parameter data in Heidenhain FE mode from TNC 355's.
CIMCO Software 4.33.21 PreviewReleased: 04-05-04
Changes in CIMCO DNC-Max 4.33.21
  • Added Mazak T4 option to the Mazak protocol configuration.
  • Added 'End Of Feed Handshake Timeout' to the standard protocol. Ref: Port/Configure Port/Transmit/EOF handshake timeout
  • Fixed problem using handshake timeout when sending end of feed data.
CIMCO Software 4.33.20 PreviewReleased: 04-04-04
Changes in CIMCO DNC-Max 4.33.20
  • Added support for sending files containing multiple programs in Mazak disk mode.
  • Fixed problem running some T2 (T4) models in disk mode.
CIMCO Software 4.33.19 PreviewReleased: 04-01-04
Changes in CIMCO Edit 4.33.19
  • Fixed problem inserting macros containing system variables.
Changes in CIMCO DNC-Max 4.33.19
  • Fixed problem sending directory listings when "Send programs in database only" was selected.
CIMCO Software 4.33.18 PreviewReleased: 03-28-04
Changes in CIMCO Edit 4.33.18
  • Fixed crash when loading some files.
CIMCO Software 4.33.17 PreviewReleased: 03-26-04
Changes in CIMCO Edit 4.33.17
  • Added 'Remove ASCII 0's' option Ref: Setup/Global Setup/Editor/Remove ASCII 0's
Changes in CIMCO DNC-Max 4.33.17
  • Changed minimum ISO receive timeout to 2 sec. in the Mazak protocol
CIMCO Software 4.33.16 PreviewReleased: 03-12-04
Changes in CIMCO DNC-Max 4.33.16
  • Added "STRICTFORMAT" option to the Mazatrol protocol.
CIMCO Software 4.33.15 PreviewReleased: 03-01-04
Changes in CIMCO Edit 4.33.15
  • Added option to allow users to change the program file associated with a program. Ref: Database/Setup/Server Settings/Advanced/Allow changing program file
Changes in CIMCO DNC-Max 4.33.15
  • Updated NC-Base link.
CIMCO Software 4.33.14 PreviewReleased: 02-25-04
Changes in CIMCO DNC-Max 4.33.14
  • Fixed checksum problem in the Heidenhain FE mode protocol.
CIMCO Software 4.33.13 PreviewReleased: 02-20-04
Changes in CIMCO Edit 4.33.13
  • Fixed renumbering problem when running on a Hyper Threaded Pentium 4.
Changes in CIMCO DNC-Max 4.33.13
  • Updated NC-Base link.
CIMCO Software 4.33.12 PreviewReleased: 02-08-04
Changes in CIMCO Edit 4.33.12
  • Added option to prompt for a file note, when associating file in NC-Base.
Changes in CIMCO DNC-Max 4.33.12
  • Updated NC-Base link.
CIMCO Software 4.33.11 PreviewReleased: 02-06-04
Changes in CIMCO Edit 4.33.11
  • Fixed backplot problem when running on a Hyper Threaded Pentium 4.
  • Fixed problem restoring NC-Base backups.
Changes in CIMCO DNC-Max 4.33.11
  • Updated NC-Base link.
CIMCO Software 4.33.10 PreviewReleased: 02-02-04
Changes in CIMCO DNC-Max 4.33.10
  • Added support for sending DLoG T1 Mazatrol files.
  • Updated Fanuc FAPT protocol.
  • Updated port ping feature.
CIMCO Software 4.33.09 PreviewReleased: 01-27-04
Changes in CIMCO DNC-Max 4.33.09
  • Changed client to auto re-connect when the server connection is dropped due to a network error.
CIMCO Software 4.33.08 PreviewReleased: 01-25-04
Changes in CIMCO Edit 4.33.08
  • Fixed problem with NC-Base loosing the user configuration for one or more users.
  • Fixed backplot problem when R-values (radius) used in G18.
  • Fixed problem with the progress bar on the transmit status dialog.
Changes in CIMCO DNC-Max 4.33.08
  • Added option to wait for the NC-Base server to start, when starting DNC-Max from the start-up folder. Ref: Setup/Configure Server/NC-Base/Wait for NC-Base when starting
  • Added support for auto receiving Hurco Ultimax 2 files.
  • Fixed problem with progress bar not always shown when port is sending.
CIMCO Software 4.33.07 PreviewReleased: 01-21-04
Changes in CIMCO DNC-Max 4.33.07
  • Fixed problem with the Fanuc FAPT template, when used with some older FAPT controls.
CIMCO Software 4.33.06 PreviewReleased: 01-16-04
Changes in CIMCO DNC-Max 4.33.06
  • Added option to ping a network device at a regular interval, and set the port offline if the ping fails. Ref: Port/Configure Port/Serial Device/Ping device at a regular interval Ref: Port/Configure Port/Serial Device/Check serial port if ping fails
  • Fixed problem with the directory monitor protocol (hang/crash)
CIMCO Software 4.33.05 PreviewReleased: 01-02-04
Changes in CIMCO DNC-Max 4.33.05
  • Added support for sending Mazatrol files stored in the Qunix DNC format.
CIMCO Software 4.33.04 PreviewReleased: 12-12-03
Changes in CIMCO Edit 4.33.04
  • Added support for plotting arcs with no X/Y/Z values specified.
Changes in CIMCO DNC-Max 4.33.04
  • Added support for auto naming files received with the Hurco protocol.
CIMCO Software 4.33.03 PreviewReleased: 12-10-03
Changes in CIMCO Edit 4.33.03
  • Added 'Remove ASCII 0's' option in the DNC transmit setup.
Changes in CIMCO DNC-Max 4.33.03
  • Added Brother QD-2/QD-3 protocol.
CIMCO Software 4.33.02 PreviewReleased: 11-22-03
Changes in CIMCO Edit 4.33.02
  • Fixed problem with the customer name, when accepting programs waiting for approval.
Changes in CIMCO DNC-Max 4.33.02
  • Updated NC-Base link.
CIMCO Software 4.33.01 PreviewReleased: 11-20-03
Changes in CIMCO Edit 4.33.01
  • NC-Base update.
Changes in CIMCO DNC-Max 4.33.01
  • Updated NC-Base link.
CIMCO Software 4.32.34 PreviewReleased: 11-13-03
Changes in CIMCO DNC-Max 4.32.34
  • Added translators to auto receive and remote request names. Ref: Port/Configure Port/Auto receive/Set/Translators Ref: Port/Configure Port/Remote request/Set/Translators
  • Added option to include the first 1-1000 lines from each program in the directory listing.
CIMCO Software 4.32.33 PreviewReleased: 11-12-03
Changes in CIMCO DNC-Max 4.32.33
  • Added extra option to the 'Replace method' list, to prevent log messages and e-mail notifications, if the received file is identical to the existing file.
CIMCO Software 4.32.32 PreviewReleased: 10-29-03
Changes in CIMCO DNC-Max 4.32.32
  • Fixed problem with the 'Send programs in database only' option.
CIMCO Software 4.32.31 PreviewReleased: 10-28-03
Changes in CIMCO DNC-Max 4.32.31
  • Fixed problem with 'Directory runners' in some cases.
  • Fixed problem with the 'Remote Send File' option in the Heidenhain FE mode protocol.
  • Fixed problem with the auto receive 'Append data' option when backups are enabled.
CIMCO Software 4.32.30 PreviewReleased: 10-15-03
Changes in CIMCO Edit 4.32.30
  • NC-Base update.
Changes in CIMCO DNC-Max 4.32.30
  • NC-Base update.
CIMCO Software 4.32.29 PreviewReleased: 10-08-03
Changes in CIMCO Edit 4.32.29
  • Added horizontal scroll bar to the file compare 'Select Window' dialog.
  • Changed machine group search to ignore the 'Always use wildcards search' option.
  • Fixed problem with the vertical scroll bar when resizing "small" windows.
Changes in CIMCO DNC-Max 4.32.29
  • Fixed problem saving log export column configuration.
  • Fixed problem creating Excel / Access external logs, if the log directory did not exists.
CIMCO Software 4.32.28 PreviewReleased: 10-02-03
Changes in CIMCO Edit 4.32.28
  • Fixed problem sending some files. (Introduced in 4.32.27)
CIMCO Software 4.32.27 PreviewReleased: 09-30-03
Changes in CIMCO Edit 4.32.27
  • Fixed problem sending files using only CR (ASCII 13) as linefeed character.
CIMCO Software 4.32.26 PreviewReleased: 09-27-03
Changes in CIMCO DNC-Max 4.32.26
  • Added 'Send at start of queue' and 'Send at end of queue' feed data. (Standard protocol) Ref: Port/Configure Port/Transmit/Start of queue Ref: Port/Configure Port/Transmit/End of queue
CIMCO Software 4.32.25 PreviewReleased: 09-25-03
Changes in CIMCO Edit 4.32.25
  • Fixed problem sending some files from NC-Base.
Changes in CIMCO DNC-Max 4.32.25
  • Added option to check the status of a serial port at a regular interval. Ref: Port/Configure Port/Serial Device/Refresh port
  • Added utility to initiate program transfers from third party applications (DNCMaxCtrl.exe).
  • Added warning when configuration files are read-only.
  • Added option to copy files to a 'Send Directory' in the Heidenhain FE mode protocol. Ref: Port/Configure Port/Remote Send File
CIMCO Software 4.32.24 PreviewReleased: 09-04-03
Changes in CIMCO Edit 4.32.24
  • Fixed problem back plotting some Heidenhain files.
Changes in CIMCO DNC-Max 4.32.24
  • Fixed problem with sending regular end of feed data as pause feed.
CIMCO Software 4.32.23 PreviewReleased: 08-28-03
Changes in CIMCO DNC-Max 4.32.23
  • Fixed error message when running protocol configuration. (Introduced in 4.32.21).
CIMCO Software 4.32.22 PreviewReleased: 08-27-03
Changes in CIMCO DNC-Max 4.32.22
  • Fixed problem using environment variables in feed data containing ASCII 0.
CIMCO Software 4.32.21 PreviewReleased: 08-26-03
Changes in CIMCO Edit 4.32.21
  • Fixed problem adding unique id's to pictures/other files.
Changes in CIMCO DNC-Max 4.32.21
  • Added option to execute a program before sending a remote request. Ref: Port/Configure Port/Remote request/Set/Execute
  • Added environment variable containing filename without extension. ($INFOFILENAMENOEXT)
CIMCO Software 4.32.20 PreviewReleased: 08-19-03
Changes in CIMCO Edit 4.32.20
  • Changed DNC not to auto save before sending a modified file.
CIMCO Software 4.32.19 PreviewReleased: 08-13-03
Changes in CIMCO Edit 4.32.19
  • Internal release.
Changes in CIMCO DNC-Max 4.32.19
  • Internal release.
CIMCO Software 4.32.18 PreviewReleased: 08-04-03
Changes in CIMCO Edit 4.32.18
  • Fixed problem opening files with names containing spaces from some applications.
Changes in CIMCO DNC-Max 4.32.18
  • Updated NC-Base link.
CIMCO Software 4.32.17 PreviewReleased: 08-01-03
Changes in CIMCO DNC-Max 4.32.17
  • Fixed problem specifying auto receive sets with no extension.
CIMCO Software 4.32.16 PreviewReleased: 07-31-03
Changes in CIMCO Edit 4.32.16
  • Added option to store programs in 'customer folders'. Ref: Database/Setup/Server Settings/Use customer folders
  • Fixed problem with specifying customer as a required field when adding new programs.
Changes in CIMCO DNC-Max 4.32.16
  • Added option to send start of feed/end of feed only after first/last file when using multi file remote request. Ref: Port/Configure Port/Receive/Advanced settings/ 'Start Of Feed' before first file only Ref: Port/Configure Port/Receive/Advanced settings/ 'End Of Feed' after last file only
  • Fixed problem with the remote directory request when no extensions was specified in the 'Include files with extensions' field.
CIMCO Software 4.32.15 PreviewReleased: 07-16-03
Changes in CIMCO DNC-Max 4.32.15
  • Added option to send all/some files from a directory. Ref: Port/Configure Port/Remote request/Set/Advanced/Directory transfer
  • Added support for 'directory runners' Ref: Port/Configure Port/Auto receive/Set/Advanced/Is directory runner
  • Fixed problem using 'Replace if found in request directory' with runner files.
  • Fixed problem with remote request matching a directory and not a filename in some cases.
CIMCO Software 4.32.14 PreviewReleased: 07-12-03
Changes in CIMCO DNC-Max 4.32.14
  • Fixed port restart timeout problem.
CIMCO Software 4.32.13 PreviewReleased: 07-11-03
Changes in CIMCO DNC-Max 4.32.13
  • Changed the Mazak protocol to allow using the 'Manual receive into selected file' option in remote request mode.
  • Fixed problem with directory listings if a non-existent directory was requested.
CIMCO Software 4.32.12 PreviewReleased: 06-25-03
Changes in CIMCO Edit 4.32.12
  • Added option to specify required NC-Base fields. Ref: Database/Setup/Server Settings/Advanced/Required fields
Changes in CIMCO DNC-Max 4.32.12
  • Updated NC Base link.
CIMCO Software 4.32.11 PreviewReleased: 06-21-03
Changes in CIMCO Edit 4.32.11
  • Fixed problem with updating NC-Base preview window.
  • Fixed crash when trying to open a deleted picture in NC-Base.
  • Fixed problem sending Mazatrol files from NC-Base.
Changes in CIMCO DNC-Max 4.32.11
  • Added option to include programs for older control models in disk directories. (Mazak protocol) Ref: Port/Configure Port/Mazatrol Transfer/Mazatrol Options/ Allow old programs in disk directories
  • Fixed problem shutting down server if NC-Base module failed to load.
  • Fixed problem showing current selection in the port list on Windows XP.
  • Fixed crash in web monitor.
  • Fixed problem sending Mazatrol files from NC-Base.
  • Fixed problem using ISO remote request with Mazak M1/M2 in the Mazak protocol.
  • Fixed problem with the 'Send unlocked programs only' option in the Mazak protocol.
  • Fixed problem with the 'Send programs in database only' option in the Mazak protocol.
CIMCO Software 4.32.10 PreviewReleased: 06-18-03
Changes in CIMCO Edit 4.32.10
  • Added support for exporting a .cimcoinf file when opening files using an external program in NC-Base.
Changes in CIMCO DNC-Max 4.32.10
  • Added support for HASP hardware dongles.
CIMCO Software 4.32.09 PreviewReleased: 06-16-03
Changes in CIMCO DNC-Max 4.32.09
  • Added option to extract a variable ($MSGTEXT) from operator messages. Ref: Setup/Configure Server/Operator Messages/Extract Value
  • Added option to prevent saving files marked as 'Readonly' in the database. Ref: Port/Configure Port/NC-Base/Do not overwrite readonly files
  • Added option to use plain text protocol configuration comments.
  • Fixed problem with variables in operator messages.
  • Fixed problem with deleted files in the network monitor protocol.
  • Fixed problem with the 'In comment' option on operator message triggers.
  • Fixed problem with the 'Remove from queue on XOn' option when 'Wait for XOn on manual transfer' was disabled.
  • Fixed problem with the 'Use single line delay trigger' option.
CIMCO Software 4.32.08 PreviewReleased: 06-14-03
Changes in CIMCO Edit 4.32.08
  • Fixed crash in 2D backplot (milling).
Changes in CIMCO DNC-Max 4.32.08
  • Added support for re-ordering files on the transmit queue.
  • Added support for suspending transfer of files waiting on the transmit queue.
  • Added option to leave files on transmit queue until an XOn is received. Ref: Port/Configure Port/Transmit/Remove from queue on XOn
  • Fixed problem auto importing binary Mazatrol files.
CIMCO Software 4.32.07 PreviewReleased: 06-10-03
Changes in CIMCO Edit 4.32.07
  • Fixed problem with arcs specified using 'R' in the 3D backplot.
Changes in CIMCO DNC-Max 4.32.07
  • Fixed problem with remote requesting looped transmissions when an end trigger was defined.
CIMCO Software 4.32.06 PreviewReleased: 06-08-03
Changes in CIMCO Edit 4.32.06
  • Added option to add unique file id's to associated picture, or all associated files. Ref: Database/Setup/Server Settings/Advanced/ Add id number to picture filenames Ref: Database/Setup/Server Settings/Advanced/ Add id number to other filenames
  • Fixed problem with arcs specified using 'R' in the 2D backplot.
Changes in CIMCO DNC-Max 4.32.06
  • Added support for 'sending files' using the directory monitor protocol.
  • Updated auto import to support importing associated files matching the filename of original program file.
  • Fixed problem with auto import module failing to start in some cases.
  • Fixed problem with the Fanuc FAPT bubble cassette protocol.
CIMCO Software 4.32.05 PreviewReleased: 06-03-03
Changes in CIMCO Edit 4.32.05
  • Added option to show 'Quick Setup' dialog when renumbering a program. Ref: Setup/Block Numbers/Show quick setup
Changes in CIMCO DNC-Max 4.32.05
  • Added option to monitor serial devices that are offline, and automatically start the port when the serial device is started. This is useful when the serial device is a network/USB hub. Ref: Port/Configure Port/Serial Device/Auto start offline ports
  • Added option to enable driver problem detection. This allows DNC-Max to automatically restart ports if a driver problem is detected. This is useful when the serial device is a network/USB hub. Ref: Port/Configure Port/Serial Device/ Restart port if driver error detected.
  • Changed directory listings to return a list containing an error description, if a non-existent directory was requested.
CIMCO Software 4.32.04 PreviewReleased: 06-03-03
Changes in CIMCO DNC-Max 4.32.04
  • Added option to all changing sub-directory in disk mode, by specifying the path delimiter at the end of the remote disk change program comment. (Mazak protocol) Ref: Port/Configure Port/Mazatrol Transfer/Allow sub-directory change
  • Added option to specify path delimiter used in remote disk change programs. (Mazak protocol) Ref: Port/Configure Port/Mazatrol Transfer/Path delimiter
  • Updated Italian translations, and added initial Hungarian translation.
  • Fixed problem stopping transfer when transfer was initiated using looped remote request.
  • Fixed problem with multi file reception when start and end trigger was on the same line.
  • Fixed problem sending new line sequence in start/end of loop feed data when 'Use regular start/end of feed information' was selected.
  • Fixed problem updating client file queue, when looped remote request was used.
  • Fixed problem with lines at start of file not always saved in the Fanuc Handyfile protocol.
  • Fixed incorrect log message when changing disk directory using a remote disk change program. (Mazak protocol)
  • Fixed problem with the 'Auto create disk directory' option, if requested disk directory contained '/'. (Mazak protocol)
CIMCO Software 4.32.03 PreviewReleased: 05-30-03
Changes in CIMCO Edit 4.32.03
  • Fixed problem printing with bold fonts.
Changes in CIMCO DNC-Max 4.32.03
  • Fixed problem with the 'Wait for XOn between looped transmissions' option, when 'Wait between queued files' wasn't selected.
CIMCO Software 4.32.02 PreviewReleased: 05-22-03
Changes in CIMCO Edit 4.32.02
  • Fixed problem specifying an extension when adding a program, if no machine group default extension was specified.
Changes in CIMCO DNC-Max 4.32.02
  • Updated NC Base link.
CIMCO Software 4.32.01 PreviewReleased: 05-21-03
Changes in CIMCO Edit 4.32.01
  • Added option to print NC-Base program listings.
  • Fixed problem using '.' in program names, if no machine group default extension was specified.
Changes in CIMCO DNC-Max 4.32.01
  • Updated NC Base link.
CIMCO Software 4.31.31 PreviewReleased: 05-20-03
Changes in CIMCO Edit 4.31.31
  • Added chamfer/rounding (L/R) to 2D backplot.
Changes in CIMCO DNC-Max 4.31.31
  • Added option to include decimals in Heidenhain FE mode remote restart program name.
CIMCO Software 4.31.30 PreviewReleased: 05-19-03
Changes in CIMCO Edit 4.31.30
  • Updated NC-Base client.
Changes in CIMCO DNC-Max 4.31.30
  • Fixed problem with the Heidenhain FE mode remote restart function when restarting programs without white spaces.
CIMCO Software 4.31.29 PreviewReleased: 05-16-03
Changes in CIMCO Edit 4.31.29
  • Added option to export NC-Base program listings to Excel or comma separated files.
  • Fixed problem with the 'Check external changes' option when saving to some network drives.
Changes in CIMCO DNC-Max 4.31.29
  • Fixed problem with the Heidenhain FE mode remote restart function when using the 'Insert filename after BEGIN PGM' option.
CIMCO Software 4.31.28 PreviewReleased: 05-15-03
Changes in CIMCO Edit 4.31.28
  • Added backup when overwriting an existing program.
  • Added option to renumber empty lines.
  • Added NC-Base client to Mastercam OEM version.
  • Fixed problem with renumbering blocks from a start trigger.
Changes in CIMCO DNC-Max 4.31.28
  • Added support for remote requesting a looped transfer. Ref: Port/Configure Port/Remote Start\Stop/Loop count
  • Added option to keep sending a file in looped mode, until the transfer is manually aborted. Specify 0 in the 'Send file advanced' loop count field.
  • Added option to only delay first N occurrences of advanced delay line triggers. To use this feature, specify a negative value in the 'Do not delay on first occurrences' field. Ref: Port/Configure Port/Transmit/Delays/ Do not delay on first occurrences.
CIMCO Software 4.31.27 PreviewReleased: 05-09-03
Changes in CIMCO Edit 4.31.27
  • Added option to overwrite an existing program when adding a new program to NC-Base.
  • Added dropdown button on the project search field.
Changes in CIMCO DNC-Max 4.31.27
  • Fixed crash when using the 'Export no-name programs' and 'Use filename as program name' option at the same time.
  • Fixed problem using activation keys when running DNC-Max as a service.
CIMCO Software 4.31.26 PreviewReleased: 05-07-03
Changes in CIMCO Edit 4.31.26
  • Fixed problem using \ in the machine group trigger setup test field.
Changes in CIMCO DNC-Max 4.31.26
  • Updated the Fanuc FAPT Cassette template.
CIMCO Software 4.31.25 PreviewReleased: 05-07-03
Changes in CIMCO Edit 4.31.25
  • Fixed problem adding Memo/Setup/Tool files when they were all disabled in the configuration.
  • Fixed crash in the Heidenhain / ISO converter.
Changes in CIMCO DNC-Max 4.31.25
  • Updated NC Base link.
CIMCO Software 4.31.24 PreviewReleased: 05-07-03
Changes in CIMCO Edit 4.31.24
  • Added option to renumber blocks from a start trigger.
  • Updated 2D backplot cycle support.
Changes in CIMCO DNC-Max 4.31.24
  • Added option to show errors only in the client system log.
  • Added option to disable dynamic updating HHT's. This should solve the problem with HHT's connected to network serial hubs that are reset. Ref: Port/Handheld Terminals/Configure/Disable dynamic refresh
  • Fixed problem sorting entries in the client system log.
CIMCO Software 4.31.23 PreviewReleased: 05-06-03
Changes in CIMCO DNC-Max 4.31.23
  • Added Hurco Conversational template.
  • Fixed problem removing ports from the client port list when stopping a server.
CIMCO Software 4.31.22 PreviewReleased: 05-02-03
Changes in CIMCO DNC-Max 4.31.22
  • Added option to ignore incoming data in the standard protocol (hidden option for now).
CIMCO Software 4.31.21 PreviewReleased: 05-02-03
Changes in CIMCO Edit 4.31.21
  • Updated NC-Base client.
Changes in CIMCO DNC-Max 4.31.21
  • Added option to use X values as restart parameters in the Heidenhain FE protocol.
  • Fixed crash/configuration corruption when using handheld terminals.
CIMCO Software 4.31.20 PreviewReleased: 04-30-03
Changes in CIMCO Edit 4.31.20
  • Updated NC-Base client.
Changes in CIMCO DNC-Max 4.31.20
  • Fixed problem exporting files from the Heidenhain protocol to NC-Base.
CIMCO Software 4.31.19 PreviewReleased: 04-29-03
Changes in CIMCO Edit 4.31.19
  • Updated NC-Base client.
Changes in CIMCO DNC-Max 4.31.19
  • Added Fanuc FAPT Bubble Cassette template.
CIMCO Software 4.31.18 PreviewReleased: 04-28-03
Changes in CIMCO Edit 4.31.18
  • Removed machine group prompt when adding programs, if only one machine group is defined.
  • Fixed problem adding Memo File/Tool List/Setup Sheet when disabled in the configuration.
  • Fixed problem with 2D milling backplot (broken since 4.31.11)
Changes in CIMCO DNC-Max 4.31.18
  • Fixed problem exporting logs from the directory monitor protocol.
CIMCO Software 4.31.17 PreviewReleased: 04-23-03
Changes in CIMCO Edit 4.31.17
  • Updated NC-Base client.
Changes in CIMCO DNC-Max 4.31.17
  • Fixed license problem when adding HHT's (again).
CIMCO Software 4.31.16 PreviewReleased: 04-21-03
Changes in CIMCO Edit 4.31.16
  • Updated 2D backplot to support Okuma specific cycles.
Changes in CIMCO DNC-Max 4.31.16
  • Updated NC Base link.
CIMCO Software 4.31.15 PreviewReleased: 04-21-03
Changes in CIMCO Edit 4.31.15
  • Added Restore.bat file to restore NC-Base backups.
  • Changed NC-Base client to show 'Add Memo File/Tool List/Setup Sheet' even when these are disabled in the configuration.
Changes in CIMCO DNC-Max 4.31.15
  • Added Restore.bat file to restore NC-Base backups.
  • Added option to use filename as program name (without an extension) when exporting received programs to NC-Base. Ref: Port/Configure Port/NC-Base Settings/Use filename as program name
  • Added option to send 'Restart feed data' when sending from line/block or tool change. Ref: Port/Configure Port/Transmit/Start of feed/ Send data before restart from line/block/tool change
  • Added option to send remote requested (or requested using HHT/PDA) programs, with different serial port settings. Ref: Port/Configure Port/Remote Request/Set/Port Settings
CIMCO Software 4.31.14 PreviewReleased: 04-15-03
Changes in CIMCO Edit 4.31.14
  • Updated NC-Base client.
Changes in CIMCO DNC-Max 4.31.14
  • Improved Heidenhain FE mode remote restart.
CIMCO Software 4.31.13 PreviewReleased: 04-15-03
Changes in CIMCO Edit 4.31.13
  • Updated NC-Base client.
Changes in CIMCO DNC-Max 4.31.13
  • Added support for remote restart in the Heidenhain FE mode protocol. Ref: Port/Configure Port/Remote Restart
  • Fixed problem with the directory monitor protocol.
  • Fixed crash when renaming ports in some cases.
CIMCO Software 4.31.12 PreviewReleased: 04-11-03
Changes in CIMCO Edit 4.31.12
  • Fixed problem selecting machine group on the program modify dialog.
Changes in CIMCO DNC-Max 4.31.12
  • Updated NC Base link.
CIMCO Software 4.31.11 PreviewReleased: 04-10-03
Changes in CIMCO Edit 4.31.11
  • Added support for G90/G91 in the 2D backplot.
Changes in CIMCO DNC-Max 4.31.11
  • Added option to locate start point in transmitted file after expanding sub-programs. Ref: Port/Configure Port/Sub-programs/Advanced Settings/ Locate start point after expansion
CIMCO Software 4.31.10 PreviewReleased: 04-09-03
Changes in CIMCO Edit 4.31.10
  • Updated NC-Base client.
Changes in CIMCO DNC-Max 4.31.10
  • Added support for sending/receiving G-code data when using the FAPT template.
  • Fixed licensing problem with handheld terminals.
CIMCO Software 4.31.09 PreviewReleased: 04-03-03
Changes in CIMCO Edit 4.31.09
  • Updated NC-Base client.
  • Added support for viewing HTML and PDF documents.
  • Fixed problem selecting send/receive directories in the Mastercam OEM version.
Changes in CIMCO DNC-Max 4.31.09
  • Added 'Stop transfer' to the handheld terminal menu.
  • Updated NC Base link.
CIMCO Software 4.31.08 PreviewReleased: 03-30-03
Changes in CIMCO Edit 4.31.08
  • Added option to add memo/tool/setup files to existing programs.
  • Added 2D backplot printing.
  • Fixed problem viewing program info when auto logged out.
Changes in CIMCO DNC-Max 4.31.08
  • Added option to disable program header, this allows DNC-Max to send programs from a different control type, ex., sending M32 programs an M-Plus control. Notice: When this option is checked, DNC-Max cannot send programs from other DNC systems, that are stored without headers. Ref: Mazatrol Transfer/Mazatrol options/Do not add program headers
  • Fixed critical problem in the Fagor 8040/8050/8055 protocol.
  • Fixed problem with selecting Character/String/Advanced trigger in the protocol configuration on Windows 9x.
CIMCO Software 4.31.07 PreviewReleased: 03-28-03
Changes in CIMCO Edit 4.31.07
  • Added option to insert environment variables in memo/tool/setup files.
  • Added option to always do wildcard searches in NC-Base.
  • Fixed problem with specifying backup directories in NC-Base.
Changes in CIMCO DNC-Max 4.31.07
  • Added option to insert environment variables in memo/tool/setup files.
  • Changed the NC-Base link to update outgoing programs when sending files from the database, and the 'Update fields before sending' option is selected (previously only remote requested programs was updated).
  • Fixed problem when auto importing programs and the 'Program' trigger was active, and program names contained \ or /.
  • Fixed auto importing customer names.
CIMCO Software 4.31.06 PreviewReleased: 03-24-03
Changes in CIMCO Edit 4.31.06
  • Updated NC-Base client.
Changes in CIMCO DNC-Max 4.31.06
  • Updated NC Base link.
CIMCO Software 4.31.05 PreviewReleased: 03-19-03
Changes in CIMCO Edit 4.31.05
  • Fixed crash when re-loading a changed file.
Changes in CIMCO DNC-Max 4.31.05
  • Fixed problem specifying multiple auto receive/remote request sets on Win 9X.
CIMCO Software 4.31.04 PreviewReleased: 03-14-03
Changes in CIMCO Edit 4.31.04
  • Updated NC-Base client.
Changes in CIMCO DNC-Max 4.31.04
  • Added option to delay response strings (Standard protocol).
CIMCO Software 4.31.03 PreviewReleased: 03-13-03
Changes in CIMCO Edit 4.31.03
  • Fixed runtime error when clicking on a deleted picture.
Changes in CIMCO DNC-Max 4.31.03
  • Updated NC Base link.
CIMCO Software 4.31.02 PreviewReleased: 03-11-03
Changes in CIMCO Edit 4.31.02
  • Updated NC-Base client.
Changes in CIMCO DNC-Max 4.31.02
  • Fixed problem with auto importing files containing #'s on the first line.
CIMCO Software 4.31.01 PreviewReleased: 03-07-03
Changes in CIMCO Edit 4.31.01
  • Added option to leave program in current directory when changing program name and 'Synchronize filenames' is selected, or keep the sub-directory name when moving a program between program groups. Ref: Database/Setup/Server Settings/'Move/Synchronize keeps directory'
  • Changed location of memo/setup/tool files to follow the directory of the program file when 'Store in program directory'/ 'Store in subdirectory'.
Changes in CIMCO DNC-Max 4.31.01
  • Added option to keep directory information when auto importing files. Ex. If a program is found in 'Import directory'\JOHNSTOOLS\PRG1234.NC, it will be moved to 'Machinegroup directory'\JOHNSTOOLS\PRG1234.NC. Ref: Setup/Configure Server/NC-Base/Auto Import/Keep directory structure
  • Updated NC-Base link to automatically detect configuration changes, eliminating the need to restart DNC-Max after changing NC-Base settings.
  • Fixed problem with sending some Mazak M2 files.
CIMCO Software 4.30.14 PreviewReleased: 03-05-03
Changes in CIMCO Edit 4.30.14
  • Added support for importing pictures from v4.16
  • Changed block renumbering to skip empty lines.
  • Updated database integrity check to detect deleted files etc.
  • Updated 'Add Program' to suggest default filename when adding untitled program from editor, and 'Synchronize Filenames' is disabled.
  • Fixed problem with 'Leave original when moving files' was ignored when adding program, and programs was allowed outside program directory.
  • Fixed problem when dragging associated files between programs.
  • Fixed problem with button layout on Add/Modify programs.
  • Fixed problem dragging files from the database to Desktop/Explorer.
  • Fixed problem with the file compare option 'Start at first difference' when the file compare toolbar was disabled.
Changes in CIMCO DNC-Max 4.30.14
  • Changed 'Export no-name programs' option to be allowed when 'Place files on approval queue' is not selected.
  • Updated serial port interface to detect network/driver problems and restart the port.
  • Fixed problem with connection limit exceeded if clients connected multiple times because of network problems.
  • Fixed problem with auto importing files without extensions.
CIMCO Software 4.30.13 PreviewReleased: 02-27-03
Changes in CIMCO Edit 4.30.13
  • Added support for importing pictures from v3.
  • Added support for file memo's.
Changes in CIMCO DNC-Max 4.30.13
  • Updated NC Base link. NC-Base:4.20.12
CIMCO Software 4.30.12 PreviewReleased: 02-26-03
Changes in CIMCO Edit 4.30.12
  • Added option to move delete files offline. Ref: Database/Setup/Server Settings/Advanced/Set deleted programs offline
  • Added option to enable/disable appending unique file id to associated files. Ref: Database/Setup/Server Settings/Advanced/ Add id number to associated filenames
  • Increased maximum extension length from 8 to 32 characters.
  • Fixed crash when copying program and 'Synchronize Filenames' was disabled.
  • Fixed crash when opening files with long extensions.
Changes in CIMCO DNC-Max 4.30.12
  • Fixed crash in protocol configuration on win9x (again - hmmm).
CIMCO Software 4.30.11 PreviewReleased: 02-20-03
Changes in CIMCO Edit 4.30.11
  • Fixed crash when comparing file with latest backup.
Changes in CIMCO DNC-Max 4.30.11
  • Updated NC Base link.
CIMCO Software 4.30.10 PreviewReleased: 02-20-03
Changes in CIMCO Edit 4.30.10
  • Changed 'Modify program' to modify names of associated files when changing program name, and the 'Force Filename' option is selected.
  • Fixed problem specifying folder when copying program.
  • Fixed problem with G0 lines in the 2D backplot.
Changes in CIMCO DNC-Max 4.30.10
  • Updated NC Base link.
CIMCO Software 4.30.09 PreviewReleased: 02-19-03
Changes in CIMCO Edit 4.30.09
  • Fixed problem modifying project descriptions.
Changes in CIMCO DNC-Max 4.30.09
  • Updated NC Base link.
CIMCO Software 4.30.08 PreviewReleased: 02-18-03
Changes in CIMCO Edit 4.30.08
  • Fixed problem with incorrect menu texts when using US English. (Introduced in 4.30.07).
Changes in CIMCO DNC-Max 4.30.08
  • Fixed problem with incorrect menu texts when using US English. (Introduced in 4.30.07).
CIMCO Software 4.30.07 PreviewReleased: 02-17-03
Changes in CIMCO Edit 4.30.07
  • Added support for using Drag'n'Drop from the database to other applications.
  • Updated 2D backplot.
  • Updated math functions.
  • Fixed problem changing the program destination directory when adding new programs to the database.
Changes in CIMCO DNC-Max 4.30.07
  • Updated NC Base link.
CIMCO Software 4.30.06 PreviewReleased: 02-14-03
Changes in CIMCO Edit 4.30.06
  • Fixed problem changing machine group.
Changes in CIMCO DNC-Max 4.30.06
  • Updated NC Base link.
CIMCO Software 4.30.05 PreviewReleased: 02-14-03
Changes in CIMCO Edit 4.30.05
  • Modified user 'Edit' permission to ignore the 'Use readonly system' option.
  • Updated math functions.
  • Updated Heidenhain/ISO converter.
Changes in CIMCO DNC-Max 4.30.05
  • Added filename prefix/suffix option to the Heidenhain FE mode protocol.
CIMCO Software 4.30.04 PreviewReleased: 02-13-03
Changes in CIMCO Edit 4.30.04
  • Added option to configure NC-Base printing header.
  • Added option to always default to machine group directory when adding new programs.
  • Fixed crash in Heidenhain to ISO converter function.
Changes in CIMCO DNC-Max 4.30.04
  • Updated NC Base link.
CIMCO Software 4.30.03 PreviewReleased: 02-12-03
Changes in CIMCO Edit 4.30.03
  • Changed NC-Base to allow searching all allowed machine groups when the 'Disable other groups' option is used.
  • Updated v3 converter to import projects.
  • Fixed layout problem on the 'Add program' and 'Modify program' dialogs when the 'Use project' option was disabled. (Introduced in 4.30.02)
Changes in CIMCO DNC-Max 4.30.03
  • Updated auto import to use a better algorithm to recognize customer names.
  • Fixed problem auto importing project name.
  • Fixed log window re-draw problem. (Introduced in 4.30.01)
CIMCO Software 4.30.02 PreviewReleased: 02-12-03
Changes in CIMCO Edit 4.30.02
  • Added v3 compatible 'Project' setting to the database.
  • Fixed problem with running database maintenance functions.
  • Fixed problem with adding untitled programs from the editor. (introduced in 4.30.01).
Changes in CIMCO DNC-Max 4.30.02
  • Fixed problem using the Mazak ISO "Save transmissions with multiple programs in multiple files" option, if the program had spaces at the beginning of a line.
  • Fixed problem with creating/updating customer information when exporting programs from DNC-Max or using auto import (again). NC-Base:4.20.11
CIMCO Software 4.30.01 PreviewReleased: 02-10-03
Changes in CIMCO Edit 4.30.01
  • Added new NC-Base search toolbar.
  • Added separate functions to approve/reject imported files.
  • Added option to use v4 extensions in v3->v4 converter.
  • Added option to select if 'Locked' programs must be 'Readonly' also (previously approved programs must be locked).
  • Added confirmation dialog when deleting files.
  • Added list of files/programs that the user is about to delete on the program/file delete confirmation dialog.
  • Changed database view to remove files locked by the user when searching for unlocked files, undeleted when searching for deleted files, etc.
  • Changed preview window to show the contents of imported files when searching for files awaiting approval.
  • Changed 'Approved' and 'Locked' to 'Locked' and 'Readonly'
  • Changed folder button on 'Add program' dialog to allow user to specify destination for the new program file.
  • Changed NC-Base to allow , (comma) in program names and filenames.
  • Change 'Add customer' button on modify program info dialog to 'Modify customer' if an existing customer is selected.
  • Removed the database header when printing files with no name (Untitled).
  • Fixed crash in the NC-Base restore dialog.
  • Fixed problem with associating memo/tool/setup files to existing programs.
  • Fixed problem with viewing some files in the NC-Base preview window.
  • Fixed problem with specifying the machine group tool list directory.
Changes in CIMCO DNC-Max 4.30.01
  • Added option to export programs with no name (failed auto receive) to the database.
  • Added QTERM-II configuration for QTERM software v4 (Q2KEYS01.V40).
  • Added support for extracting the program comment from Mazak Fusion binary files in the NC-Base auto import module.
  • Added option in the Mazak protocol to pre-fetch and cache all files on a local drive. This should solve problem with slow network connections.
  • Changed all protocols to allow , (comma) in filenames.
  • Fixed problem with transmitting files with incorrect checksums in the Deckel Dialog 4/11 protocol.
  • Fixed crash in client when viewing system log.
  • Fixed crash in server when running the web monitor.
  • Fixed problem with updating database info when using the import queue.
  • Fixed problem with the auto receive 'Ignore start/end trigger' option if the received data started with more than 1000 ASCII 0's.
  • Fixed problem with creating/updating customer information when exporting programs from DNC-Max or using auto import.
  • Fixed problem with Deckel Dialog 4/11 including the extension in the program name exported to the database.
  • Fixed problem with the Mazak protocol option 'Insert filename in comment' when using diskmode. NC-Base:4.20.10
CIMCO Software 4.23.25 PreviewReleased: 1-25-03
Changes in CIMCO Edit 4.23.25
  • Added Mazatrol program info to database preview window.
  • Removed buttons from NC-Base toolbar when disabled in server configuration (Customer/Lock/Approve).
  • Updated math functions.
CIMCO Software 4.23.24 PreviewReleased: 1-23-03
Changes in CIMCO Edit 4.23.24
  • Updated NC Base client.
CIMCO Software 4.23.23 PreviewReleased: 1-21-03
Changes in CIMCO Edit 4.23.23
  • Added option to scan associated files for database info when auto importing.
  • Added option to auto import associated files.
CIMCO Software 4.23.22 PreviewReleased: 1-19-03
Changes in CIMCO Edit 4.23.22
  • Added 'Selection Only' option to the math functions.
  • Updated math functions.
  • Updated 2D backplot.
  • Fixed problem with the 'Cancel' would set the file modified on the adjust feed/speed dialog.
  • Added confirmation when deleting customer from the database.
  • Added option to print database info header (also works with DNC-Max remote print requests).
  • Disabled Lock/Approve buttons when locking/approval not used.
  • Fixed problem with adding deleted programs to the database.
  • Fixed problem with starting the database on Windows 9x.
  • Fixed problem with printing pictures in the NC-Base preview window.
  • Fixed problem with MSVCRT.DLL on some NT4 systems.
  • Fixed problem with upgrading from V3 databases on NT4/Win9x. Notice: Microsoft Data Access Components (MDAC) 2.x or higher required. Download MDAC 2.5: www.microsoft.com/data/download_25SP3.htm
CIMCO Software 4.23.21 PreviewReleased: 1-16-03
Changes in CIMCO Edit 4.23.21
  • Updated NC Base client.
CIMCO Software 4.23.20 PreviewReleased: 1-13-03
Changes in CIMCO Edit 4.23.20
  • Updated NC Base client.
CIMCO Software 4.23.19 PreviewReleased: 1-07-03
Changes in CIMCO Edit 4.23.19
  • Updated NC Base client.
CIMCO Software 4.23.18 PreviewReleased: 1-07-03
Changes in CIMCO Edit 4.23.18
  • Updated 2D backplot.
CIMCO Software 4.23.17 PreviewReleased: 2-23-02
Changes in CIMCO Edit 4.23.17
  • Updated math functions.
CIMCO Software 4.23.16 PreviewReleased: 2-15-02
Changes in CIMCO Edit 4.23.16
  • Added 3D backplot printing.
  • Added 3D backplot 'screen shot' feature.
  • Added print option to the NC-Base picture viewer.
  • Updated NC Base client.
CIMCO Software 4.23.15 PreviewReleased: 2-11-02
Changes in CIMCO Edit 4.23.15
  • Updated NC Base client.
CIMCO Software 4.23.14 PreviewReleased: 2-10-02
Changes in CIMCO Edit 4.23.14
  • Added 'Ignore' option to NC-Base program format setup.
  • Updated NC Base client.
  • Updated math functions.
CIMCO Software 4.23.13 PreviewReleased: 2-08-02
Changes in CIMCO Edit 4.23.13
  • Updated NC Base client.
  • Fixed problem when closing the program while minimized.
CIMCO Software 4.23.12 PreviewReleased: 2-04-02
Changes in CIMCO Edit 4.23.12
  • Updated NC Base client.
CIMCO Software 4.23.11 PreviewReleased: 2-02-02
Changes in CIMCO Edit 4.23.11
  • Add quick info bar to the NC-Base Explorer.
  • Updated NC Base client.
  • Fixed crash in backplot (2D and 3D).
CIMCO Software 4.23.10 PreviewReleased: 1-27-02
Changes in CIMCO Edit 4.23.10
  • Modified NC-Base preview to auto update changed files.
CIMCO Software 4.23.09 PreviewReleased: 1-27-02
Changes in CIMCO Edit 4.23.09
  • Changed print dialog to remember Print From/To page range.
  • Fixed problem with sending programs from NC-Base (introduced in 4.15.08).
CIMCO Software 4.23.08 PreviewReleased: 1-26-02
Changes in CIMCO Edit 4.23.08
  • Updated NC Base client.
CIMCO Software 4.23.07 PreviewReleased: 1-23-02
Changes in CIMCO Edit 4.23.07
  • Added additional customer info to NC-Base (Zip/State).
CIMCO Software 4.23.06 PreviewReleased: 1-22-02
Changes in CIMCO Edit 4.23.06
  • Updated NC Base client.
CIMCO Software 4.23.05 PreviewReleased: 1-18-02
Changes in CIMCO Edit 4.23.05
  • Changed install program to leave configuration files when un-installing.
  • Changed 'Add Program/Move program file option' to remember last selection.
  • Fixed problem with comparing non-locked files to latest backup. File was always marked as read-only.
  • Fixed problem with the 'Remember last search' option.
  • Fixed problem with specifying machine group tool list directory.
CIMCO Software 4.23.04 PreviewReleased: 1-16-02
Changes in CIMCO Edit 4.23.04
  • Added 6 additional customer fields (the database now supports a total of 9 custom definable fields).
  • Added option to exclude fields from the search window.
  • Added option to show preview below search results.
CIMCO Software 4.23.03 PreviewReleased: 1-15-02
Changes in CIMCO Edit 4.23.03
  • Updated NC Base client.
  • Fixed problem when upgrading the editor.
CIMCO Software 4.23.02 PreviewReleased: 1-14-02
Changes in CIMCO Edit 4.23.02
  • Fixed problem with scrolling the search window on Windows 98.
CIMCO Software 4.23.01 PreviewReleased: 1-06-02
Changes in CIMCO Edit 4.23.01
  • Updated NC Base client.
CIMCO Software 4.22.24 PreviewReleased: 1-02-02
Changes in CIMCO Edit 4.22.24
  • Updated NC Base client.
CIMCO Software 4.22.23 PreviewReleased: 0-30-02
Changes in CIMCO Edit 4.22.23
  • Updated NC Base client.
  • Fixed problem with updating the status bar clock.
CIMCO Software 4.22.22 PreviewReleased: 0-23-02
Changes in CIMCO Edit 4.22.22
  • Fixed problem with renumbering lines like 'NCYL G81 Z....'
CIMCO Software 4.22.21 PreviewReleased: 0-22-02
Changes in CIMCO Edit 4.22.21
  • Updated NC Base client
CIMCO Software 4.22.20 PreviewReleased: 0-17-02
Changes in CIMCO Edit 4.22.20
  • Added 'Don't move cursor after paste' option.
CIMCO Software 4.22.19 PreviewReleased: 9-30-02
Changes in CIMCO Edit 4.22.19
  • Updated NC Base client
CIMCO Software 4.22.18 PreviewReleased: 0-07-02
Changes in CIMCO Edit 4.22.18
  • Updated math functions.
  • Fixed crash in 2D backplot.
CIMCO Software 4.22.17 PreviewReleased: 9-30-02
Changes in CIMCO Edit 4.22.17
  • Updated NC Base client
CIMCO Software 4.22.16 PreviewReleased: 9-29-02
Changes in CIMCO Edit 4.22.16
  • Updated NC Base client
CIMCO Software 4.22.15 PreviewReleased: 9-29-02
Changes in CIMCO Edit 4.22.15
  • Updated NC Base client
CIMCO Software 4.22.14 PreviewReleased: 9-25-02
Changes in CIMCO Edit 4.22.14
  • Updated NC Base client
CIMCO Software 4.22.13 PreviewReleased: 9-17-02
Changes in CIMCO Edit 4.22.13
  • Added status LED's on the DNC transmit/receive status dialogs.
  • Changed block number option 'Skip lines starting with' to allow more than 32 characters.
  • Updated Finish translation.
  • Fixed problem with the DNC option 'Enable DTR'.
CIMCO Software 4.22.12 PreviewReleased: 9-06-02
Changes in CIMCO Edit 4.22.12
  • Improved offset function
CIMCO Software 4.22.11 PreviewReleased: 9-02-02
Changes in CIMCO Edit 4.22.11
  • Improved offset function
CIMCO Software 4.22.10 PreviewReleased: 8-26-02
Changes in CIMCO Edit 4.22.10
  • Updated 2D backplot to handle G76 cycles.
CIMCO Software 4.22.09 PreviewReleased: 8-26-02
Changes in CIMCO Edit 4.22.09
  • Changed find (CTRL+F) to update the 'Find what' field when the search dialog is visible.
  • Fixed problem with updating view after changing font size.
  • Fixed problem with window title on Windows XP systems using the XP theme.
CIMCO Software 4.22.08 PreviewReleased: 8-02-02
Changes in CIMCO Edit 4.22.08
  • Fixed problem with plotting 3D Heidenhain files with mixed relative and absolute arc coordinates (again).
CIMCO Software 4.22.07 PreviewReleased: 8-01-02
Changes in CIMCO Edit 4.22.07
  • Fixed problem with plotting 3D Heidenhain files with mixed relative and absolute arc coordinates.
CIMCO Software 4.22.06 PreviewReleased: 7-19-02
Changes in CIMCO Edit 4.22.06
  • Fixed hang in backplot when closing modified file.
  • Fixed problem with small arcs in math functions.
CIMCO Software 4.22.05 PreviewReleased: 7-08-02
Changes in CIMCO Edit 4.22.05
  • Fixed hang in Heidenhain backplot.
CIMCO Software 4.22.04 PreviewReleased: 6-20-02
Changes in CIMCO Edit 4.22.04
  • Updated math functions.
CIMCO Software 4.22.03 PreviewReleased: 6-20-02
Changes in CIMCO Edit 4.22.03
  • Fixed tool change problem when using the rotate function.
  • Fixed problem with the mark/delete range function.
CIMCO Software 4.22.02 PreviewReleased: 6-12-02
Changes in CIMCO Edit 4.22.02
  • Fixed problem with the tool compensation function.
CIMCO Software 4.22.01 PreviewReleased: 6-01-02
Changes in CIMCO Edit 4.22.01
  • Updated German Translations.
CIMCO Software 4.21.21 PreviewReleased: 5-30-02
Changes in CIMCO Edit 4.21.21
  • Improved the tool compensation function.
CIMCO Software 4.21.20 PreviewReleased: 5-27-02
Changes in CIMCO Edit 4.21.20
  • Fixed GPF when inserting white spaces in some Heidenhain programs.
CIMCO Software 4.21.19 PreviewReleased: 5-22-02
Changes in CIMCO Edit 4.21.19
  • Fixed crash in 2D backplot on some systems.
CIMCO Software 4.21.18 PreviewReleased: 5-14-02
Changes in CIMCO Edit 4.21.18
  • Fixed problem with G18/G19 in the Heidenhain to ISO converter.
  • Changed handling of temporary keys. Now a warning is shown when the temporary key is about to expire (less than 2 weeks remains).
CIMCO Software 4.21.17 PreviewReleased: 5-09-02
Changes in CIMCO Edit 4.21.17
  • Changed Heidenhain to ISO converter to place tool changes in comments. (Should have been included in the previous release).
  • Changed default 2D backplot colors.
  • Fixed problem with the "Show plot as positive X/I" option.
CIMCO Software 4.21.16 PreviewReleased: 5-09-02
Changes in CIMCO Edit 4.21.16
  • Changed Heidenhain to ISO converter to place tool changes in comments.
  • Added option to show programs with negative X/I values above the Z-axis in 2D backplot.
CIMCO Software 4.21.15 PreviewReleased: 5-08-02
Changes in CIMCO Edit 4.21.15
  • Added Heidenhain to ISO converter function (requires Math option).
CIMCO Software 4.21.14 PreviewReleased: 4-28-02
Changes in CIMCO Edit 4.21.14
  • Fixed problem with arcs in G70/G71/G72 backplot.
CIMCO Software 4.21.13 PreviewReleased: 4-27-02
Changes in CIMCO Edit 4.21.13
  • Enabled support for G70/G71/G72 in the 2D turning backplot with all keyfiles licensed backplot.
CIMCO Software 4.21.12 PreviewReleased: 4-26-02
Changes in CIMCO Edit 4.21.12
  • Added scale/mirror/rotate and tool compensation functions.
  • Added checksum to activation keys.
  • Added support for G70/G71/G72 in the 2D turning backplot.
  • Added option to specify arc centers as a diameter measure when diameter programming is used in the 2D turning backplot.
  • Fixed problem if Machinist ToolBox wasn't installed in the default directory.
CIMCO Software 4.21.11 PreviewReleased: 4-13-02
Changes in CIMCO Edit 4.21.11
  • Added support for the Machinist ToolBox plugin.
  • Changed Backplot to allow only one window to be opened.
CIMCO Software 4.21.10 PreviewReleased: 4-12-02
Changes in CIMCO Edit 4.21.10
  • Added 'Auto insert spaces' option.
  • Added 2D backplot setup.
  • Added support for 2D milling in the 2D backplot.
  • Fixed problem with machine description not updated when adding new DNC ports on Win9x/ME.
CIMCO Software 4.21.09 PreviewReleased: 4-10-02
Changes in CIMCO Edit 4.21.09
  • Fixed crash when starting editor (introduced in 4.21.08).
CIMCO Software 4.21.08 PreviewReleased: 4-09-02
Changes in CIMCO Edit 4.21.08
  • Updated 2D backplot
  • Fixed problem with zoom all when using dynamic updates.
  • Fixed problem with insert white spaces also updating comments in some cases.
CIMCO Software 4.21.07 PreviewReleased: 3-24-02
Changes in CIMCO Edit 4.21.07
  • Added 2D backplot.
  • Fixed problem with menu/toolbar help text not always shown in the status bar.
CIMCO Software 4.21.06 PreviewReleased: 3-18-02
Changes in CIMCO Edit 4.21.06
  • Fixed problem with running the program as a demo version.
CIMCO Software 4.21.05 PreviewReleased: 3-17-02
Changes in CIMCO Edit 4.21.05
  • Added option to specify default send/receive directories and extensions in the DNC.
  • Fixed problem with the receive start/end triggers in the DNC. In some cases the entire line containing the trigger was saved. Now data is saved from the start trigger to the end trigger (both included).
CIMCO Software 4.21.04 PreviewReleased: 3-11-02
Changes in CIMCO Edit 4.21.04
  • Fixed problem with when long filenames in header on first page.
  • Fixed problem with printing total page count. (Introduced in 4.21.03)
CIMCO Software 4.21.03 PreviewReleased: 3-07-02
Changes in CIMCO Edit 4.21.03
  • Fixed GPF when receiving files in the DNC with a linefeed sequence that was different from the one specified in the configuration.
  • Updated scale/mirror/rotate.
CIMCO Software 4.21.02 PreviewReleased: 3-04-02
Changes in CIMCO Edit 4.21.02
  • Fixed problem with adjusting feedrate and spindle speed in Heidenhain files.
CIMCO Software 4.21.01 PreviewReleased: 2-28-02
Changes in CIMCO Edit 4.21.01
  • Added option to always show all files (*.*) in file dialogs.
  • Rotated backplot top and ISO view 90 degrees clockwise.
CIMCO Software 4.20.39 PreviewReleased: 2-19-02
Changes in CIMCO Edit 4.20.39
  • Changed DNC to use 'Wait for XOn' fix (EMULATEXOFF).
CIMCO Software 4.20.38 PreviewReleased: 2-14-02
Changes in CIMCO Edit 4.20.38
  • Fixed problem with plotting Heidenhain files using arcs in the XZ/YZ planes.
  • Fixed problem when using SMT template in the DNC (garbage was received).
  • Fixed problem when upgrading from and older version (from before Dec. 2001), that caused the editor to promt for a new activation key.
CIMCO Software 4.20.37 PreviewReleased: 2-03-02
Changes in CIMCO Edit 4.20.37
  • Fixed problem with the mirror/scale/rotate math functions.
  • Fixed hang when plotting some Heidenhain files.
CIMCO Software 4.20.36 PreviewReleased: 1-01-02
Changes in CIMCO Edit 4.20.36
  • Improved calculation of stock size in backplot.
  • Changed backplot to ignore coordinates specified on lines containing G4/G5 and no move command.
  • Fixed problem with stopping transmission when using special SMT 220 template.
CIMCO Software 4.20.35 PreviewReleased: 9-01-02
Changes in CIMCO Edit 4.20.35
  • Added 'Remove empty lines' option.
CIMCO Software 4.20.34 PreviewReleased: 6-01-02
Changes in CIMCO Edit 4.20.34
  • Updated French and Spanish translations.
CIMCO Software 4.20.33 PreviewReleased: 6-01-02
Changes in CIMCO Edit 4.20.33
  • Added support for relative coordinates when plotting Heidenhain files.
CIMCO Software 4.20.32 PreviewReleased: 4-01-02
Changes in CIMCO Edit 4.20.32
  • Added support for plotting files using relative coordinates when G91 is specified.
  • Fixed problem with math functions toolbar was hidden after restarting the editor.
CIMCO Software 4.20.31 PreviewReleased: 2-11-01
Changes in CIMCO Edit 4.20.31
  • Added option to specify filename before receiving into a new window.
  • Fixed problem with auto selection of file type, when opening existing file.
CIMCO Software 4.20.30 PreviewReleased: 2-06-01
Changes in CIMCO Edit 4.20.30
  • Changed transmit 'Omit empty lines', it now omits lines that becomes empty after applying 'Remove characters'.
  • Fixed problem with 'Receive into open window' would open a new window (introduced in 4.20.26).
  • Fixed problem with the activation key, it the user had limited access to the registry.
CIMCO Software 4.20.29 PreviewReleased: 1-23-01
Changes in CIMCO Edit 4.20.29
  • Removed 'Filename' field from the DNC receive status window, when receiving into a new window.
CIMCO Software 4.20.28 PreviewReleased: 11-23-01
Changes in CIMCO Edit 4.20.28
  • Fixed problem with loading files containing lines longer than 1024 characters, in some cases one character was missing from each line.
  • Fixed problem with linefeeds missing from received file in some cases. (Fix in 4.20.27 missed one special case).
CIMCO Software 4.20.27 PreviewReleased: 11-22-01
Changes in CIMCO Edit 4.20.27
  • Fixed problem with linefeeds missing from received file in some cases (2 lines would be merged).
CIMCO Software 4.20.26 PreviewReleased: 11-17-01
Changes in CIMCO Edit 4.20.26
  • Added backplot option to draw 'zero arcs' (arcs with same start and end-point).
  • Added backplot option to specify arc center relative to start/end or absolute (if auto detect fails).
  • Added DNC option to omit empty lines when receiving.
  • Changed backplot configuration to accept tool lengths and diameters as a fraction. Ex. Tool diameter = 1/8
  • Changed backplot to choose a better default tool size for NC files using inches.
  • Changed DNC to receive into a new window without prompting for a file name (Again! - didn't make into the release build first time around).
  • Fixed problem with back plotting some files using relative I/J/K values.
CIMCO Software 4.20.25 PreviewReleased: 11-01-01
Changes in CIMCO Edit 4.20.25
  • Removed the 'File is already open' message when trying to open a file multiple times, without the 'Open file multiple times' option active.
CIMCO Software 4.20.24 PreviewReleased: 10-30-01
Changes in CIMCO Edit 4.20.24
  • Fixed problem with the 'Check external changes' option. On large files the editor would report that the file was modified, and then display an error message, and open an empty file.
CIMCO Software 4.20.23 PreviewReleased: 10-29-01
Changes in CIMCO Edit 4.20.23
  • Changed DNC to receive into a new window without prompting for a file name.
CIMCO Software 4.20.22 PreviewReleased: Unknown
Changes in CIMCO Edit 4.20.22
  • Added edit field to specify feedrate/spindle speed.
  • Added option to show full path or filename only in window title.
  • Changed 'Adjust Feedrate'/'Adjust spindle speed' to default to 100% on new files.
  • Fixed problem with "Transmit start trigger". The DNC would report "Start trigger not found", if the start trigger was found at the beginning of the first line in the file.
CIMCO Software 4.20.21 PreviewReleased: Unknown
Changes in CIMCO Edit 4.20.21
  • Added "Transmit end trigger" option to the DNC.
  • Changed '/close' option to CIMCO Mini DNC. In can now be specified either before or after the name of the file.
  • Fixed problem with using identical start and end triggers when receiving.
  • Fixed problem with window title not changed when using "File/Save As" (introduced in 4.20.14).
  • Fixed problem with "Find Previous".
CIMCO Software 4.20.20 PreviewReleased: Unknown
Changes in CIMCO Edit 4.20.20
  • Added French and Spanish manuals.
CIMCO Software 4.20.19 PreviewReleased: Unknown
Changes in CIMCO Edit 4.20.19
  • Updated Spanish translations.
  • Added '/close' option to CIMCO Mini DNC.
CIMCO Software 4.20.18 PreviewReleased: Unknown
Changes in CIMCO Edit 4.20.18
  • Added Spanish translations.
CIMCO Software 4.20.17 PreviewReleased: Unknown
Changes in CIMCO Edit 4.20.17
  • Changed renumbering to include lines starting with a block skip character.
CIMCO Software 4.20.16 PreviewReleased: Unknown
Changes in CIMCO Edit 4.20.16
  • Added option to customize tab width.
  • Disabled "Check external changes" for files located on floppy.
  • Removed 'Ctrl+G' shortcut to 'Remove block numbers'
  • Fixed problem in backplot with programs using negative R (radius) values.
CIMCO Software 4.20.15 PreviewReleased: Unknown
Changes in CIMCO Edit 4.20.15
  • Added file size info to the status bar (shown in either bytes, meters or feet).
CIMCO Software 4.20.14 PreviewReleased: Unknown
Changes in CIMCO Edit 4.20.14
  • Added support for opening shortcuts.
CIMCO Software 4.20.13 PreviewReleased: Unknown
Changes in CIMCO Edit 4.20.13
  • Fixed problem with backplot if lines contained only a G code with no X/Y/Z parameters.
CIMCO Software 4.20.12 PreviewReleased: Unknown
Changes in CIMCO Edit 4.20.12
  • Changed math functions to select 'Selection only' by default if any text is marked.
  • Fixed GPF when using math functions on some files.
CIMCO Software 4.20.11 PreviewReleased: Unknown
Changes in CIMCO Edit 4.20.11
  • Added simple math functions and adjust feedrate/spindle speed.
CIMCO Software 4.20.10 PreviewReleased: Unknown
Changes in CIMCO Edit 4.20.10
  • Added Fanuc RS-422 baud rates (76800 & 86400) to DNC configuration.
CIMCO Software 4.20.09 PreviewReleased: Unknown
Changes in CIMCO Edit 4.20.09
  • Updated Italian translations.
CIMCO Software 4.20.08 PreviewReleased: Unknown
Changes in CIMCO Edit 4.20.08
  • Added support for auto detecting the following line feed sequences in the DNC \13, \10, \13\10, \10\13, \13\10\10, \13\13\10, \10\13\13 and \10\10\13
CIMCO Software 4.20.07 PreviewReleased: Unknown
Changes in CIMCO Edit 4.20.07
  • Fixed problem with saving files on Novell servers with 8.3 filenames.
  • Fixed problem with opening UNC named files (introduced in 4.10.39)
  • Fixed GFP if cancel was selected after stop of long commands.
CIMCO Software 4.20.06 PreviewReleased: Unknown
Changes in CIMCO Edit 4.20.06
  • Changed default colors in machine templates.
CIMCO Software 4.20.05 PreviewReleased: Unknown
Changes in CIMCO Edit 4.20.05
  • Added 'Start feed from line containing' option to DNC transmission.
  • Added 'Remove characters' option to DNC transmission.
  • Fixed problem with files modified externally while back plot split window was active.
CIMCO Software 4.20.04 PreviewReleased: Unknown
Changes in CIMCO Edit 4.20.04
  • Fixed problem with Heidenhain backplot
CIMCO Software 4.20.03 PreviewReleased: Unknown
Changes in CIMCO Edit 4.20.03
  • Added split window to backplot module
CIMCO Software 4.20.02 PreviewReleased: Unknown
Changes in CIMCO Edit 4.20.02
  • Added Heidenhain support to the backplot module.
  • Fixed problems with backplot
CIMCO Software 4.20.01 PreviewReleased: Unknown
Changes in CIMCO Edit 4.20.01
  • Added backplot module
CIMCO Software 4.15.25 PreviewReleased: 01-25-03
Changes in CIMCO DNC-Max 4.15.25
  • Increased maximum auto receive "Trigger look ahead" lines to 100000.
  • Fixed licensing problem.
CIMCO Software 4.15.24 PreviewReleased: 01-23-03
Changes in CIMCO DNC-Max 4.15.24
  • Updated remote request configuration test fields to indicate when a directory listing is requested.
  • Fixed licensing problem.
CIMCO Software 4.15.23 PreviewReleased: 01-21-03
Changes in CIMCO DNC-Max 4.15.23
  • Added option to scan associated files for database info when auto importing.
  • Added option to auto import associated files.
CIMCO Software 4.15.22 PreviewReleased: 01-19-03
Changes in CIMCO DNC-Max 4.15.22
  • Added option to specify file format for Mazak T1 files.
  • Added option to send only approved programs and/or programs in the database.
  • Added option to use the program comment in Mazak binary files as the program name when exporting file to NC-Base from the directory monitor protocol.
  • Added 'ISO Wait for XOn' option in the Mazak protocol.
  • Added option to specify ISO start/end of feed data in the Mazak protocol.
  • Added 'Remote request delay' option in the Mazak protocol.
  • Fixed problem with the printer setup 'Max pages' option.
CIMCO Software 4.15.21 PreviewReleased: 01-16-03
Changes in CIMCO DNC-Max 4.15.21
  • Fixed problem with the Fagor 8010/8020/8025/8030 protocol.
CIMCO Software 4.15.20 PreviewReleased: 01-13-03
Changes in CIMCO DNC-Max 4.15.20
  • Fixed crash in administrator client.
CIMCO Software 4.15.19 PreviewReleased: 01-07-03
Changes in CIMCO DNC-Max 4.15.19
  • Added option to ignore failed request during a multi file request.
CIMCO Software 4.15.18 PreviewReleased: 01-07-03
Changes in CIMCO DNC-Max 4.15.18
  • Fixed problem with sending SG Dataline Mazatrol files.
CIMCO Software 4.15.17 PreviewReleased: 12-23-02
Changes in CIMCO DNC-Max 4.15.17
  • Fixed problem with drip-feeding ISO programs to some Heidenhain controls using the FE mode protocol.
  • Fixed problem with sending Mazatrol files without a tape header.
CIMCO Software 4.15.16 PreviewReleased: 12-15-02
Changes in CIMCO DNC-Max 4.15.16
  • Added option to wait for XOn between queued files and/or files requested using multi file remote request.
  • Updated NC Base link.
  • Fixed problem with closing the client using Alt+F4 or ESC. (introduced in 4.15.15)
CIMCO Software 4.15.15 PreviewReleased: 12-11-02
Changes in CIMCO DNC-Max 4.15.15
  • Added option to disable delay between programs requested using multi file remote request. Previously the 'Delay before transmission start' was always used.
  • Fixed crash in standard protocol when using % in received filename.
CIMCO Software 4.15.14 PreviewReleased: 12-10-02
Changes in CIMCO DNC-Max 4.15.14
  • Updated NC Base link.
  • Fixed problem with separate auto receive directory triggers when more than one auto receive set was defined.
  • Fixed problem with extra blank lines when auto detecting end of block sequence LF CR CR & CR LF LF in the standard protocol.
  • Fixed problem in Mazak protocol when a single ASCII 0 was received, the port would stay in ISO receive and never timeout.
  • Fixed problem with connection limit exceeded if clients connected multiple times because of network problems.
  • Fixed crash in protocol configuration on W95/W98/ME.
  • Fixed crash in directory monitor protocol when using the NC-Base setting 'Update fields after receiving', and the received file was binary. NC-Base:4.20.09
CIMCO Software 4.15.13 PreviewReleased: 12-08-02
Changes in CIMCO DNC-Max 4.15.13
  • Added daily warning message when running the server with a temporary keyfile, and there is less than 15 days left before the keyfile expires.
  • Added option to allow users without administrator privileges to start/ stop/restart ports. Ref: Setup/Configure Client/Allow users to re-start ports
  • Added option to keep the file dialog open after pressing the edit button. Ref: Setup/Configure Client/Keep file dialog open after edit
CIMCO Software 4.15.12 PreviewReleased: 12-04-02
Changes in CIMCO DNC-Max 4.15.12
  • Added Fagor 8010/8020/8025/8030 protocol.
  • Fixed problem with defining printers in DNC-Max on Windows 95/98/ME.
  • Fixed crash when printing with invalid headers defined.
  • Fixed crash in Heidenhain FE protocol if 'Request directories' configuration was illegal.
CIMCO Software 4.15.11 PreviewReleased: 12-02-02
Changes in CIMCO DNC-Max 4.15.11
  • Added protocol to monitor controls using network connections.
CIMCO Software 4.15.10 PreviewReleased: 11-27-02
Changes in CIMCO DNC-Max 4.15.10
  • Added support for auto importing memo/tool/setup files into NC-Base.
  • Fixed problem with sending reports in some cases.
CIMCO Software 4.15.09 PreviewReleased: 11-26-02
Changes in CIMCO DNC-Max 4.15.09
  • Fixed problem with sending programs from NC-Base (introduced in 4.15.08).
CIMCO Software 4.15.08 PreviewReleased: 11-26-02
Changes in CIMCO DNC-Max 4.15.08
  • Fixed crash when shutting down a server with a large number of ports.
CIMCO Software 4.15.07 PreviewReleased: 11-23-02
Changes in CIMCO DNC-Max 4.15.07
  • Updated NC Base link. NC-Base:4.20.08
CIMCO Software 4.15.06 PreviewReleased: 11-22-02
Changes in CIMCO DNC-Max 4.15.06
  • Added Fanuc FAPT protocol.
CIMCO Software 4.15.05 PreviewReleased: 11-18-02
Changes in CIMCO DNC-Max 4.15.05
  • Changed backup functions from 'Copy file' to 'Move file', this should solve the 'Access denied' problem with Novell Netware.
  • Fixed problem with the remote directory change option in the FE protocol.
CIMCO Software 4.15.04 PreviewReleased: 11-16-02
Changes in CIMCO DNC-Max 4.15.04
  • Updated NC Base link.
CIMCO Software 4.15.03 PreviewReleased: 11-15-02
Changes in CIMCO DNC-Max 4.15.03
  • Updated NC Base link.
CIMCO Software 4.15.02 PreviewReleased: 11-14-02
Changes in CIMCO DNC-Max 4.15.02
  • Fixed problem with the 'Use empty program' directory change option in the Heidenhain FE protocol. NC-Base:4.20.07
CIMCO Software 4.15.01 PreviewReleased: 11-06-02
Changes in CIMCO DNC-Max 4.15.01
  • Updated NC Base link.
  • Fixed problem with updating the server environment variables after starting a disabled port.
CIMCO Software 4.14.29 PreviewReleased: 11-04-02
Changes in CIMCO DNC-Max 4.14.29
  • Added 'Replace illegal characters with -' option to auto receive sets. If this option is not selected, illegal characters are now automatically removed. NC-Base:4.20.06
CIMCO Software 4.14.28 PreviewReleased: 11-02-02
Changes in CIMCO DNC-Max 4.14.28
  • Updated NC-Base link.
CIMCO Software 4.14.27 PreviewReleased: 10-30-02
Changes in CIMCO DNC-Max 4.14.27
  • Added option in DNCMax.ini to add the LAN manager as a dependency when running DNC-Max as a service (GLOBAL/LANMANDEPEND).
  • Fixed problem with running the server configuration from the service manager. NC-Base:4.20.05
CIMCO Software 4.14.26 PreviewReleased: 10-23-02
Changes in CIMCO DNC-Max 4.14.26
  • Fixed problem with downloading some jobs in the Agie protocol.
CIMCO Software 4.14.25 PreviewReleased: 10-22-02
Changes in CIMCO DNC-Max 4.14.25
  • Updated NC Base link
CIMCO Software 4.14.24 PreviewReleased: 10-17-02
Changes in CIMCO DNC-Max 4.14.24
  • Added option to specify the comment length in the Mazak protocol.
  • Fixed service dependency on NC Base server.
CIMCO Software 4.14.23 PreviewReleased: 10-12-02
Changes in CIMCO DNC-Max 4.14.23
  • Fixed possible crash in the protocol configuration.
CIMCO Software 4.14.22 PreviewReleased: 10-07-02
Changes in CIMCO DNC-Max 4.14.22
  • Changed Mazak protocol to always use delayed receive. Previously delayed receive was only used when 'Replace if found in request directories' was selected. This should solve problems with slow network drives.
CIMCO Software 4.14.21 PreviewReleased: 09-30-02
Changes in CIMCO DNC-Max 4.14.21
  • Added 'Ignore programs' option to auto receive sets. Ref: Port/Configure Port/Auto Receive/Set/Advanced/Ignore Programs
  • Fixed crash in protocol configuration.
  • Fixed corrupted printer alias list in protocol configuration when e-mail notification was disabled.
CIMCO Software 4.14.20 PreviewReleased: 09-30-02
Changes in CIMCO DNC-Max 4.14.20
  • Update NC Base link
CIMCO Software 4.14.19 PreviewReleased: 09-29-02
Changes in CIMCO DNC-Max 4.14.19
  • Added help icon ('?') to the server configuration dialog title bar.
CIMCO Software 4.14.18 PreviewReleased: 09-25-02
Changes in CIMCO DNC-Max 4.14.18
  • Update NC Base link
CIMCO Software 4.14.17 PreviewReleased: 09-17-02
Changes in CIMCO DNC-Max 4.14.17
  • Moved server configuration menu from 'Port' to 'Setup'.
  • Updated Finish translation.
  • Fixed problem when using variables in auto receive/remote request prefix/suffix strings.
  • Fixed problem with HHT's showing up in the web monitor.
CIMCO Software 4.14.16 PreviewReleased: 09-06-02
Changes in CIMCO DNC-Max 4.14.16
  • Added option to ember values specified on the hand held terminal (previously it would always remember).
  • Fixed problem with opening server configuration on old Win98 systems.
CIMCO Software 4.14.15 PreviewReleased: 09-02-02
Changes in CIMCO DNC-Max 4.14.15
  • Added remote server configuration for messaging and log export options.
  • Changed server configuration layout.
  • Fixed high CPU load problem when trying to run the web monitor on a port used by another application.
CIMCO Software 4.14.14 PreviewReleased: 08-26-02
Changes in CIMCO DNC-Max 4.14.14
  • Added file operations to manual send, manual receive, remote request and auto receive. (Standard protocol)
  • Protocol configuration comment field was never included in 4.14.12
  • Fixed problem with sending jobs in the Agie Classic/Evolution/Innovation protocol, when a job extension was specified.
CIMCO Software 4.14.13 PreviewReleased: 08-26-02
Changes in CIMCO DNC-Max 4.14.13
  • Fixed problem with selecting the 'Must be at start of line' and 'Must be at end of line' options on the auto receive and remote request trigger configuration pages. (Introduced in 4.14.12)
CIMCO Software 4.14.12 PreviewReleased: 08-26-02
Changes in CIMCO DNC-Max 4.14.12
  • Added comment field to all protocols. The comment field supports limited formatting (bold/italic/underline/bullets/colors/left/right/center).
  • Added 'Wait for XOn between looped transmissions' option to the standard protocol. Ref: Port/Configure Port/Transmit/Start of loop/ Wait for XOn between looped transmissions
  • Added 'Edit' button to Send/Receive dialogs when server is local.
  • Changed 'Replace with' list on 'Serial port/Translation' to show both ASCII character and value.
  • Changed default value for 'Handling of % at start/end' in the Mazatrol protocol, so a % is no longer send at the beginning.
  • Changed default program numbers in directory listings etc. to use O numbers below 8000.
  • Fixed problem with 'Omit empty lines' when line became empty as a result of applying translators.
  • Fixed problem with logon button grayed on web monitor login page when no password was used.
  • Fixed problem with default button on translator setup pages.
  • Fixed problem with advanced translators.
  • Fixed crash when renaming ports.
  • Fixed problem with bringing client to front when pressing the 'Administration' button on the server console.
  • Fixed problem with setting 'Fail on error count' to 0.
  • Fixed problem with auto receive/remote request program names ending with space(s), when space was included in 'Accept other characters'.
CIMCO Software 4.14.11 PreviewReleased: 08-08-02
Changes in CIMCO DNC-Max 4.14.11
  • Added option to use telnet interface without NC Base.
CIMCO Software 4.14.10 PreviewReleased: 07-31-02
Changes in CIMCO DNC-Max 4.14.10
  • Changed Mazak protocol to handle slow network connections better.
  • Update French translations.
CIMCO Software 4.14.09 PreviewReleased: 07-29-02
Changes in CIMCO DNC-Max 4.14.09
  • Added additional error information when Mazak remote request fails.
CIMCO Software 4.14.08 PreviewReleased: 07-27-02
Changes in CIMCO DNC-Max 4.14.08
  • Added option to send % at start/end of ISO files in the Mazak protocol.
  • Added option to convert O-numbers to : in the Mazak protocol.
  • Fixed problem updating test fields in the protocol configuration when using advanced auto receive/remote request path triggers.
  • Fixed problem with transmitting ISO files containing % in the Mazak protocol.
  • Fixed problem with specifying no extension in auto receive sets. (was never included in 4.14.07).
CIMCO Software 4.14.07 PreviewReleased: 07-19-02
Changes in CIMCO DNC-Max 4.14.07
  • Fixed problem with Mazak comments containing non-printable characters.
  • Fixed problem with specifying no extension in auto receive sets.
  • Fixed problem with handheld terminals.
CIMCO Software 4.14.06 PreviewReleased: 07-14-02
Changes in CIMCO DNC-Max 4.14.06
  • Added Fanuc Handy File protocol.
  • Added missing file types to the Heidenhain FE configuration.
  • Added French and Spanish on-line manuals.
  • Fixed log corruption when using looped transmissions.
  • Fixed problem with connecting to local servers with no ports defined.
  • Added distribution without documentation.
CIMCO Software 4.14.05 PreviewReleased: 07-08-02
Changes in CIMCO DNC-Max 4.14.05
  • Fixed problem with the Fagor 8050/8055 protocol.
CIMCO Software 4.14.04 PreviewReleased: 06-23-02
Changes in CIMCO DNC-Max 4.14.04
  • Added remote directory change option to the Heidenhain FE protocol. Ref: Port/Configure Port/Advanced settings/Remote directory change
  • Added option to print transmitted files in the Heidenhain FE protocol. Ref: Port/Configure Port/Advanced settings/Printing
  • Fixed problem with the 'Max line length' option in the standard protocol.
  • Fixed problem with testing COM ports above COM9 in the server configuration.
CIMCO Software 4.14.03 PreviewReleased: 06-10-02
Changes in CIMCO DNC-Max 4.14.03
  • Added support for storing Mazatrol files in SolutionWare format. (Mazak protocol)
  • Added separate request directories for Mazatrol and ISO file. (Mazak protocol)
  • Fixed printing problem with some network printers.
CIMCO Software 4.14.02 PreviewReleased: 05-27-02
Changes in CIMCO DNC-Max 4.14.02
  • Added OSAI 86xx protocol.
CIMCO Software 4.14.01 PreviewReleased: 05-22-02
Changes in CIMCO DNC-Max 4.14.01
  • Fixed problem with including only files matching a list of extensions in directory listings. (standard protocol).
  • Fixed problem with the new multi file reception option if 'Save at start/end of file' data was specified.
CIMCO Software 4.12.20 PreviewReleased: 05-17-02
Changes in CIMCO DNC-Max 4.12.20
  • Added operator messages to the Agie, Fagor 8050/8055, Farley, Heidenhain FE mode, Heidenhain LSV2 and Deckel Dialog 4/11 protocols.
  • Added option to append files received using multi file reception. Ref: Port/Configure Port/Auto receive/Set/Advanced/ Append files received using multi file reception
  • Changed administrator client name from DNC-Max Administration to DNC-Max Client.
  • Fixed problem with the test all remote request sets feature in the protocol configuration, it did not correctly reflect the priority of remote request sets.
  • Fixed problem with the 'Send XOn at start of manual reception' option.
  • Fixed problem with $PORTNAME not updated when renaming port, without restarting it.
CIMCO Software 4.12.19 PreviewReleased: 05-14-02
Changes in CIMCO DNC-Max 4.12.19
  • Added option to log printing events. Ref: Setup/Configure Server/Printers/Log printer events
  • Added operator messages to the Mazak protocol, using both ISO and Mazatrol programs.
  • Added additional error information when printing fails.
  • Changed handling of temporary keys. Now a warning is shown when the temporary key is about to expire (less than 2 weeks remains).
  • Changed handling of temporary keys. Now a warning is shown when the temporary key is about to expire (less than 2 weeks remains).
  • Fixed problem with logging ports with short names in Excel.
CIMCO Software 4.12.18 PreviewReleased: 05-09-02
Changes in CIMCO DNC-Max 4.12.18
  • Added option to include only files matching a list of extensions in directory listings. (standard protocol). Ref: Port/Configure Port/Remote Request/Set/Advanced
  • Added $RECVONO, $RECVONO4, $RECVONO6 and $RECVONO8 environment variables. These holds the O number of the received program. The last 3 shows the O number with 4, 6 or 8 digits. Example: $RECVONO6 = 000012. (standard protocol).
CIMCO Software 4.12.17 PreviewReleased: 05-06-02
Changes in CIMCO DNC-Max 4.12.17
  • Added option to disable Windows shutdown when DNC-Max is running. Ref: 'Setup/Configure Server/Server configuration/Disable Windows Shutdown'
  • Added support for operator messages. (standard protocol) Ref: 'Setup/Configure Server/Operator messages'
  • Added support for exporting logs to an external database like Excel or Access. (standard protocol) Ref: 'Setup/Configure/Log Export' & 'Setup/Configure/Log Format'
  • Changed the DNC-Max service manager to allow removal of the DNC-Max service, even if the service option is not enabled in the keyfile.
  • Removed DNC-Max service manager icon from the desktop.
CIMCO Software 4.12.16 PreviewReleased: 04-29-02
Changes in CIMCO DNC-Max 4.12.16
  • Added 'Split file' option.
  • Added 'Append data' option to auto receive sets.
CIMCO Software 4.12.15 PreviewReleased: 04-27-02
Changes in CIMCO DNC-Max 4.12.15
  • Added EIA RS-244 setting to the standard protocol.
  • Added runner receive timeout option to the standard protocol.
  • Changed NC Base link to export backup names to the NC Base.
  • Changed Mazak protocol to store ISO files received in CMT mode with the linefeed character used by the Griffo format.
  • Fixed problem with the 'Handshake timeout option' when a 'Handshake resume delay' was specified.
CIMCO Software 4.12.14 PreviewReleased: 04-12-02
Changes in CIMCO DNC-Max 4.12.14
  • Fixed problem when receiving Mazatrol programs containing '\' in the comment, and 'Use comment as program name' was selected.
CIMCO Software 4.12.13 PreviewReleased: 04-10-02
Changes in CIMCO DNC-Max 4.12.13
  • Updated CIMCO Edit.
CIMCO Software 4.12.12 PreviewReleased: 04-09-02
Changes in CIMCO DNC-Max 4.12.12
  • Fixed problem with multi file reception skipping files in some situations.
CIMCO Software 4.12.11 PreviewReleased: 03-29-02
Changes in CIMCO DNC-Max 4.12.11
  • Fixed problem with the Farley protocol test link function.
  • Fixed problem with removing remote request/auto receive sets.
CIMCO Software 4.12.10 PreviewReleased: 03-26-02
Changes in CIMCO DNC-Max 4.12.10
  • Fixed crash when starting ports using the Agie protocol.
CIMCO Software 4.12.09 PreviewReleased: 03-26-02
Changes in CIMCO DNC-Max 4.12.09
  • Added option to request filenames containing only a partial match of the remote requested name.
  • Fixed problem with the 'Always add extension' option in remote requests.
CIMCO Software 4.12.08 PreviewReleased: 03-22-02
Changes in CIMCO DNC-Max 4.12.08
  • Fixed problem with manual receive reports was send even when disabled.
  • Fixed problem with inserting white spaces in the Fagor 8050/8055 protocol.
CIMCO Software 4.12.07 PreviewReleased: 03-20-02
Changes in CIMCO DNC-Max 4.12.07
  • Added path handling to manual receive backups (similar to the auto receive backup).
  • Added option to just store a single .bak backup file.
  • Added option to send response data only if sending/receiving/idle.
  • Changed auto receive backup to used specified path handling even if no path info was specified in the auto received program.
  • Fixed problem with empty error reports send if error reports were disabled and success reports were enabled, and multiple failed transmissions were received.
CIMCO Software 4.12.06 PreviewReleased: 03-18-02
Changes in CIMCO DNC-Max 4.12.06
  • Added option to send data as a response to incoming data matching a 'Response triggers'.
  • Fixed problem with running the program as a demo version.
CIMCO Software 4.12.05 PreviewReleased: 03-17-02
Changes in CIMCO DNC-Max 4.12.05
  • Added manual receive backup to the standard protocol.
  • Added option to specify multiple remote request extensions. (standard protocol).
  • Added manual printing to the client.
  • Added support for sending files from CIMCO NC Base.
  • Changed file dialog so no extension is added if 'All files' is selected and a filename without an extension is specified.
  • Fixed problem with browsing network resources on some systems.
  • Fixed total page was wrong on printout containing only one page.
  • Fixed problem with the web monitor failing to start in some cases.
  • Fixed problem when browsing web monitor with a screen resolution lower than 1024x768.
  • Fixed problem when running the server as a service in demo mode and then adding a keyfile without service support.
CIMCO Software 4.12.04 PreviewReleased: 03-12-02
Changes in CIMCO DNC-Max 4.12.04
  • Added WAP support to the web monitoring module.
  • Added Farley protocol.
CIMCO Software 4.12.03 PreviewReleased: 03-08-02
Changes in CIMCO DNC-Max 4.12.03
  • Added web monitor module.
  • Fixed problem with Header/Footer option was grayed in the server configuration when 'Raw' mode was selected.
  • Fixed problem with long timeouts in the Fagor 8050/8055 protocol. (introduced in 4.12.02)
  • Fixed GPF in administrator client when specifying just a UNC server name in the file dialog. File dialog now shows resources available on the specified server.
  • Fixed problems with 'Max list size' option. When a value of 0 was specified, an empty directory list was generated. Now a value of 0 specifies no limit on the number of entries in the directory list.
CIMCO Software 4.12.02 PreviewReleased: 03-04-02
Changes in CIMCO DNC-Max 4.12.02
  • Added support for printing auto received and remote requested programs in the standard protocol.
  • Fixed problem with creating directories on first server start.
  • Fixed problem with the 'Remove white spaces' option in the Fagor 8050/8055 protocol.
CIMCO Software 4.12.01 PreviewReleased: 02-28-02
Changes in CIMCO DNC-Max 4.12.01
  • Added option to use additional remote request extensions when searching for files to replace when receiving in the Mazak protocol.
  • Added 'Always Add Extension' option to auto receive and remote request filenames in the standard protocol.
  • Added option to specify machine name used when exporting files to CIMCO NC Base v4.
  • Fixed problem with remote request in the Mazak protocol, if the request directories contained a large number of files ( >1000 ).
  • Fixed problem with 'Replace if found in request directories' option in the Mazak protocol, if the request directories contained a large number of files ( >1000 ).
  • Fixed problem with 'Start receive' and 'End receive' e-mail notification check boxes were switched.
  • Fixed problem with multiple request extensions in the Mazak protocol.
CIMCO Software 4.11.11 PreviewReleased: 02-20-02
Changes in CIMCO DNC-Max 4.11.11
  • Fixed problem with transferring programs with single digit program numbers in the Fagor 8050/55 protocol.
CIMCO Software 4.11.10 PreviewReleased: 02-14-02
Changes in CIMCO DNC-Max 4.11.10
  • Fixed server crash when redirected program did not contain a valid program name, and "Save Failed Transfers" was enabled.
  • Fixed problem with standard protocol going into auto received, when using EIA mode, and control sends flow control or other non-EIA characters.
  • Fixed problem with transmission not always stopping when using 'Stop Transmission'.
  • Fixed problem with the Fagor 8050/8055 protocol.
CIMCO Software 4.11.09 PreviewReleased: 02-03-02
Changes in CIMCO DNC-Max 4.11.09
  • Added option to specify multiple remote request extensions in the Mazak protocol.
  • Added drop down menu to insert ASCII characters in the protocol configuration input fields.
  • Fixed problem with some 2 letter escape characters (CR/LF/HT/..) in the protocol configuration feed data fields.
  • Fixed problem with the CIMCO NC Base export module.
  • Fixed problem with the Mazak protocol not responding in some cases (introduced in 4.11.07).
  • Fixed problem with the CMT Contents functions on some Mazak controls.
CIMCO Software 4.11.08 PreviewReleased: 31-01-02
Changes in CIMCO DNC-Max 4.11.08
  • Added Fagor 8050/8055 protocol.
CIMCO Software 4.11.07 PreviewReleased: 29-01-02
Changes in CIMCO DNC-Max 4.11.07
  • Changed standard protocol to use 'Wait for XOn' fix (EMULATEXOFF) by default.
  • Changed 'Start port' to also enable port.
  • Fixed timeout problem after failed remote request.
  • Fixed problem with stopping transmission if port was waiting for start XOn, using the EMULATEXOFF setting.
CIMCO Software 4.11.06 PreviewReleased: 18-01-02
Changes in CIMCO DNC-Max 4.11.06
  • Added 'Handshake resume delay' option to the standard protocol.
  • Added option save Mazatrol files in either CIMCO (Plain), CimNet or Griffo format.
CIMCO Software 4.11.05 PreviewReleased: 16-01-02
Changes in CIMCO DNC-Max 4.11.05
  • Fixed problem with Mazak ISO remote request when the first comment was on the same line as the last % character.
  • Fixed problem with sending to some Mazak T2 models.
  • Fixed problem with sending Mazatrol files containing binary data from the Griffo system.
CIMCO Software 4.11.04 PreviewReleased: 04-01-02
Changes in CIMCO DNC-Max 4.11.04
  • Fixed problem with the 'Different receive directory' option on the Heidenhain FE model manual tab. Value was not saved when server was restarted.
  • Fixed problem with continuous beep on some QTerm-II HHT's.
  • Fixed problem with specifying port name, when adding new ports on Windows 9x.
CIMCO Software 4.11.03 PreviewReleased: 12-11-01
Changes in CIMCO DNC-Max 4.11.03
  • Fixed problem with 'Do not delay on first occurrences' option. All lines would be delayed, including lines not matching the trigger, if a value of 0 was specified. (introduced in 4.10.08) This is a critical problem for all systems that uses the Okuma template.
CIMCO Software 4.11.02 PreviewReleased: 12-10-01
Changes in CIMCO DNC-Max 4.11.02
  • Fixed problem with Mazak T1's.
  • Fixed problem with inserting sub-programs if the repeat trigger was disabled.
  • Fixed problem with the activation key, it the user had limited access to the registry.
  • Fixed problem with environment variables in the standard protocol string translator.
  • Fixed problem with displaying environment variables in the protocol configuration sub-program test field.
CIMCO Software 4.11.01 PreviewReleased: 12-03-01
Changes in CIMCO DNC-Max 4.11.01
  • Added string translator to the standard protocol.
  • Added support for requesting multiple programs in a single remote request program (specify multiple triggers). Notice: Select 'Receive/Advanced Settings/Enable multi file request' to enable this feature.
  • Changed method used to connect to remote servers. The client can now connect to remote servers if the client is behind a firewall. If the server is behind a firewall, is now only required that port 4444 is open (TCP only).
  • Fixed problem with standard protocol reporting a reception error after receiving a failed remote request, if an end trigger was defined, and failed request reports was disabled.
  • Fixed problem with remote request removing leading 0/1/2's from received program name. (Introduced in 4.10.08).
  • Fixed problem with Mazak T2's in disk mode.
  • Fixed problem when connecting more than 30 remote clients simultaneously.
CIMCO Software 4.10.39 PreviewReleased: Unknown
Changes in CIMCO Edit 4.10.39
  • Added German on-line help.
  • Updated German translations.
  • Fixed problem with expanding 8.3 names to long filenames.
  • Fixed focus problem with file compare windows.
CIMCO Software 4.10.38 PreviewReleased: Unknown
Changes in CIMCO Edit 4.10.38
  • Fixed problem with extra space added at end of line using 'Insert white spaces'.
CIMCO Software 4.10.37 PreviewReleased: Unknown
Changes in CIMCO Edit 4.10.37
  • Fixed problem with long start/end feed strings in DNC setup.
CIMCO Software 4.10.36 PreviewReleased: Unknown
Changes in CIMCO Edit 4.10.36
  • Added window list (was removed in 4.10.31).
CIMCO Software 4.10.35 PreviewReleased: Unknown
Changes in CIMCO Edit 4.10.35
  • Added 'Send before start of reception' option to the DNC.
CIMCO Software 4.10.34 PreviewReleased: Unknown
Changes in CIMCO Edit 4.10.34
  • Improved file compare on files with many differences.
  • Changed focus policy for file compare windows.
CIMCO Software 4.10.33 PreviewReleased: Unknown
Changes in CIMCO Edit 4.10.33
  • Fixed problem with file compare synchronization using the keyboard. Changes would always be synchronized from right to left. Introduced in 4.10.31.
CIMCO Software 4.10.32 PreviewReleased: Unknown
Changes in CIMCO Edit 4.10.32
  • Updated German translations.
CIMCO Software 4.10.31 PreviewReleased: Unknown
Changes in CIMCO Edit 4.10.31
  • Added print from/to page option.
  • Changed behavior when starting editor with non-existing file as parameter. A new empty file is now created.
  • Changed 'Insert white spaces' so space is never inserted at the beginning of a line.
  • Fixed problem GPF when comparing file with itself in some cases.
  • Fixed GPF when 'Close All' selected and file compare on untitled file was active.
  • Fixed problem with command line compare option (/c) if editor was already started. It would try to open the file '/c'.
CIMCO Software 4.10.30 PreviewReleased: Unknown
Changes in CIMCO Edit 4.10.30
  • Back plot beta release.
CIMCO Software 4.10.29 PreviewReleased: Unknown
Changes in CIMCO Edit 4.10.29
  • Added option to save backup files (.bak).
CIMCO Software 4.10.28 PreviewReleased: Unknown
Changes in CIMCO Edit 4.10.28
  • Added on-line documentation.
  • Fixed problem with default load/save path.
  • Fixed problem with remembering search/replace strings.
CIMCO Software 4.10.27 PreviewReleased: Unknown
Changes in CIMCO Edit 4.10.27
  • Updated machine templates to set DTR and RTS high by default.
CIMCO Software 4.10.26 PreviewReleased: Unknown
Changes in CIMCO Edit 4.10.26
  • Fixed GPF when no receive linefeed was specified in DNC.
CIMCO Software 4.10.25 PreviewReleased: Unknown
Changes in CIMCO Edit 4.10.25
  • Fixed problem with printer font size.
CIMCO Software 4.10.24 PreviewReleased: Unknown
Changes in CIMCO Edit 4.10.24
  • Fixed problem with empty strings in installation program. Any text that has not been translated is now shown in English.
CIMCO Software 4.10.23 PreviewReleased: Unknown
Changes in CIMCO Edit 4.10.23
  • Updated installation.
CIMCO Software 4.10.22 PreviewReleased: Unknown
Changes in CIMCO Edit 4.10.22
  • Updated some messages.
CIMCO Software 4.10.21 PreviewReleased: Unknown
Changes in CIMCO Edit 4.10.21
  • Moved program icons to 'Profiles/All users'.
CIMCO Software 4.10.20 PreviewReleased: Unknown
Changes in CIMCO Edit 4.10.20
  • Added expansion of names containing '~'.
  • Fixed problem with opening files from explorer containing spaces.
CIMCO Software 4.10.19 PreviewReleased: Unknown
Changes in CIMCO Edit 4.10.19
  • Updated installation.
CIMCO Software 4.10.18 PreviewReleased: Unknown
Changes in CIMCO Edit 4.10.18
  • Updated installation.
  • Fixed problem with large fonts in about box.
CIMCO Software 4.10.17 PreviewReleased: Unknown
Changes in CIMCO Edit 4.10.17
  • Added option to prevent opening file more than once.
  • Added option to disable check for external modifications.
  • Added command line option to compare two files ( /C file1 file2 ).
  • Change behavior of Escape key (no character inserted).
  • Fixed printer problem with some drivers (very small printout).
  • Fixed problem when saving large files, introduced in 4.10.16.
CIMCO Software 4.10.16 PreviewReleased: Unknown
Changes in CIMCO Edit 4.10.16
  • Full path now show in window title.
  • Added notification when file is changed outside the editor.
  • Added 'Send XOn before start of reception' to DNC.
  • Added option to allow for default windows load/save directory behavior.
  • Added Swedish translation.
  • Added Estonian translation.
  • Fixed problem with writing bad ini data when demo was expired.
  • Change clipboard format to support ANSI characters.
  • Fixed problem with specifying data to send at start of transmission.
  • Fixed problem with last bytes received was not saved if transfer was canceled.
  • Fixed problem when read only file was saved to a different name.
CIMCO Software 4.10.15 PreviewReleased: Unknown
Changes in CIMCO Edit 4.10.15
  • Added recent file list to open and send/receive.
  • Added message if any of the files in file compare are read-only.
  • Added \r\n when data inserted on clipboard.
  • Modified insert/remove white spaces to ignore comments.
  • Fixed GPF when canceling open of second file in file compare.
  • Fixed GPF in file compare on some files.
  • Fixed toolbars got wrong positions if program was minimized when clicking on files in explorer.
CIMCO Software 4.10.14 PreviewReleased: Unknown
Changes in CIMCO Edit 4.10.14
  • Fixed problem with configuration of received linefeed characters in standard serial protocol.
CIMCO Software 4.10.13 PreviewReleased: Unknown
Changes in CIMCO Edit 4.10.13
  • Improved file load speed.
  • Added HISTORY.TXT (This file).
CIMCO Software 4.10.12 PreviewReleased: Unknown
Changes in CIMCO Edit 4.10.12
  • Added finish translation.
  • Added 'wait for XOn' option to standard serial protocol.
  • Fixed problem with reception of files with size modulo 256.
  • Fixed shortcut key problem in file compare setup.
  • Fixed problem with title in search and replace dialog.
  • Fixed missing printer template files.
  • Fixed a few minor dialog layout problems.
CIMCO Software 4.10.11 PreviewReleased: Unknown
Changes in CIMCO Edit 4.10.11
  • Added Mini DNC.
CIMCO Software 4.10.10 PreviewReleased: Unknown
Changes in CIMCO Edit 4.10.10
  • Fixed problem with start of file compare on loading files.
  • Improved insert/append file.
  • Added French translation.
  • Added Danish translation.
  • Added ellipsis when showing long filenames in transfer status.
CIMCO Software 4.10.09 PreviewReleased: 11-25-01
Changes in CIMCO Edit 4.10.09
  • Added 'Find X/Y/Z Range'.
  • Added 'Receive to open file'.
  • Added ellipsis to long names in receive/transmit status.
  • Added support for specifying non-existent files on command line.
  • Fixed memory leak when closing files (introduced in 4.0.6).
  • Fixed problem with replace with length 0 string in R/O files.
Changes in CIMCO DNC-Max 4.10.09
  • Added support for the Mazak T1 (use the new Mazak T1 template).
  • Added option to the Mazak protocol to specify how many lines should be delayed when sending ISO files.
  • Fixed problems with the Heidenhain and Deckel Dialog 4/11 protocols (Introduced in 4.10.01).
  • Fixed problem with progress bar/remaining time not updated correctly when sending files with sub-programs.
CIMCO Software 4.10.08 PreviewReleased: 11-23-01
Changes in CIMCO Edit 4.10.08
  • Fixed problem with very long lines in DNC.
  • Fixed problem with time limited license keys.
Changes in CIMCO DNC-Max 4.10.08
  • Add support for inserting sub-programs in the transmitted file. (standard protocol).
  • Added support for redirecting remote request and auto receive (runner) programs. This allows the operator to request a program from one control, and have DNC-Max send it to another.
  • Added 'Stop Bits' option to the Mazak port configuration dialog.
  • Changed environment to make several variables persistent. They can now be use to provide further info in failed reports. Previously file size/program name etc. were cleared before generating failed reports.
  • Fixed problem with the path selection dropdown list in the file dialog not working correctly.
  • Fixed problem with the 'Remove leading character' field on the remote request filename setup sheet was missing the character/string selection button.
  • Fixed problem with the file dialog showing the wrong extensions in the 'File types' field. (Introduced in 4.10.07)
  • Fixed problem with empty error text in failed reports. (Introduced in 4.10.07).
  • Fixed problem with receive reports showing the backup name and not the received filename. (Introduced in 4.10.07)
  • Fixed problem with specifying [ and ] as comment start/end character.
  • Fixed problem with the send/receive 'Send from trigger' option.
  • Fixed problem with 'Do not delay on first occurrences' option.
CIMCO Software 4.10.07 PreviewReleased: 11-17-01
Changes in CIMCO Edit 4.10.07
  • Added Italian translation.
  • Added support for time limited license keys.
  • Fixed problem with re-sync positioning in file compare.
Changes in CIMCO DNC-Max 4.10.07
  • Added support for running DNC-Max as a service.
  • Added support for restricting operator access to $SENDROOT/$RECVROOT only (no directory changing allowed).
  • Added support for restricting operator access to specific file types (based on the extension).
  • Added default configurations for the server e-mail setup dialogs.
  • Added option not to make a temporary copy of the files transmitted, unless they are located on a network or removable drive.
  • Added option to specify the Mazak ISO receive timeout.
  • Added option to receive into the file selected on the manual tab, when using the Mazak protocol in manual mode.
  • Added option to omit empty lines when receiving. (standard protocol)
  • Added option to ignore start and end triggers inside comments. (standard protocol)
  • Added 'Logon As Administrator' to the client setup menu.
  • Added support for the following SMTP authentication types: AUTH LOGIN, AUTH LOGIN PLAIN and CRAM MD5. Notice: DNC-Max now supports all standard SMPT authentication types, including POP account authentication.
  • Added option to auto detect SMTP authentication type.
  • Changed file dialog to show preview of actual file when selecting a shortcut.
  • Changed Mazak protocol to use the 'smart parity' feature by default. This should solve a number of problems with Mazak's connected to 'faulty' serial adapters/hubs. Notice: Old configurations are auto updated to enable 'smart parity'
  • Changed information about first directory searched in failed remote request reports. $RECVPATH now contains both the first directory and the filename that the server scanned.
  • Changed all protocols to support the same set of report environment variables (for e-mail logging)
  • Changed server to update the log as each port is started.
  • Changed server so it will not start accepting connections before all ports have been started.
  • Changed auto directory creation to detect network problems and abort operation (previously the server could take minutes to start if one or more server/port directories were pointing to a non-existing server).
  • Changed installation program to leave Cfg\DNCMax.ini and Cfg\DNCAdm.ini behind when removing DNC-Max. This will preserve the client/server configuration if DNC-Max is removed (Using Add/Remove program), before installing an upgrade.
  • Changed e-mail module, so it will no longer auto disable if the mail server fails to respond.
  • Changed file dialog to show name of last used file in the 'File name' field.
  • Disabled the 'Never connect to remote servers' option in the client configuration, if no local server is installed.
  • Optimized the client/server communication protocol to use less bandwidth.
  • Fixed problem with $SENDROOT/$RECVROOT not updated after changing port configuration without restarting the client.
  • Fixed problem with connection to 'slow' SMTP servers.
  • Fixed problem with some SMTP mails server that performs a reverse DNS lookup on the connecting host.
  • Fixed GPF in the server when stopping/restarting/configuring ports.
  • Fixed problem with some mail programs not showing the body of e-mails generated by DNC-Max.
  • Fixed problem with client would fail to connect if started at the same time as the server, and the server had a larger number of ports.
  • Fixed problem with the 'Manual' tab showing the wrong file/program name in some cases. (Introduced in 4.10.04)
  • Fixed problem with the 'Manual' tab showing send/received lines that were incorrect in some cases.
  • Fixed a hang in the client when specifying an invalid admin password (introduced in 4.10.04)
  • Fixed problem with file dialogs showing the wrong year.
  • Fixed problem with file dialogs showing the wrong file type description for file types with invalid registry entries.
  • Fixed problem with directory dialog loosing the connection when browsing the network neighborhood on remote servers.
CIMCO Software 4.10.06 PreviewReleased: 11-01-01
Changes in CIMCO Edit 4.10.06
  • Fix tabbing order in "Setup block numbers".
  • Added support for "raw" print on network printers.
Changes in CIMCO DNC-Max 4.10.06
  • Added option to insert the filename after BEGIN/END PGM in the Heidenhain FE mode protocol.
  • Fixed problem with connecting multiple clients to the local server, when 'Connect to local server only' was selected (introduced in 4.10.04)
CIMCO Software 4.10.05 PreviewReleased: 10-30-01
Changes in CIMCO Edit 4.10.05
  • Added DNC debug file.
  • Messages boxes changed to modal.
Changes in CIMCO DNC-Max 4.10.05
  • Fixed problem with the 'Always open base directory' option. Send and receive would always open in $DATA and not $SENDROOT/$RECVROOT.
CIMCO Software 4.10.04 PreviewReleased: 10-29-01
Changes in CIMCO Edit 4.10.04
  • Changed goto block number, so it looked for closest number.
  • Added field to select machine type in DNC Setup dialog.
  • Send/receive not working from menus (Broken since 4.00.7).
  • Duplicate extension entry when opening files for send/receive.
  • Pressing 'Show Status' for DNC transfer, while transfer. completed dialog is shown caused a GPF.
Changes in CIMCO DNC-Max 4.10.04
  • Added option to make a temporary 'local' copy of all files transmitted.
  • Added option to remember the size and position of the administrator client.
  • Added option to start the administrator client maximized.
  • Added option to always show 'All files'.
  • Added option always open the base directory ($SENDROOT, $RECVROOT or $DATA).
  • Added 'Connect to local server only' option.
  • Moved all client configuration options into a single configuration dialog. Only the administrator is allowed to access the configuration dialog.
  • Added support for restricting operator access to files. To limit operator access, specify $SENDROOT and/or $RECVROOT on the new directory setup sheet. Notice: A server password must be defined on all servers to use this feature. Notice: To restrict manual Mazatrol operations in the Mazak protocol, select 'Limit access to $DATA' on the 'Mazatrol Options' setup sheet.
  • Added support for SMTP POP authentication in the e-mail module.
  • Changed administrator client to hide Feed/Speed tab, if the system is not licensed to use the feed/speed option.
  • Fixed problem with server configuration not detecting all changes that requires a server restart.
  • Fixed problem with the server configuration saving the wrong server name (introduced in 4.10.01).
  • Fixed problem with server not always saving e-mail configurations.
CIMCO Software 4.10.03 PreviewReleased: 10-24-01
Changes in CIMCO Edit 4.10.03
  • Added goto line/block number.
  • 'Save As' on untitled filed suggested a strange name.
  • Multiple ignore char for block numbering not ignoring spaces in specified list of ignore strings.
  • File compare fails to detect lines insert at the end of a file in some cases.
Changes in CIMCO DNC-Max 4.10.03
  • Modified license check to allow E-mail option to run on demo and dealer versions.
  • Fixed problem in Mazak protocol. Control would report a device problem during transfer. (Introduced in 4.10.01)
CIMCO Software 4.10.02 PreviewReleased: Unknown
Changes in CIMCO Edit 4.10.02
  • File extensions in file open/save removed from filename.
  • Added 'Auto indent' option.
Changes in CIMCO DNC-Max 4.10.02
  • Added % to the end of reports and directory listings in the generic serial template.
  • Updated French and Spanish translations.
  • Changed port log to show error codes for all error entries.
  • Changed standard protocol to ignore remote requests during multi file receptions.
  • Fixed problem with progress bar not updated correctly at the beginning of a transmission.
  • Fixed problem with Mazak ISO remote request, if first comment was not on the same line as the program number.
  • Fixed problem with server configuration not prompting to restart server after changing environment variables.
  • Fixed focus problem when adding new environment variables in the server configuration. The directory selector could not receive mouse inputs.
CIMCO Software 4.10.01 PreviewReleased: Unknown
Changes in CIMCO Edit 4.10.01
  • Added option to goto first diff after file compare init.
  • New distribution ini files.
  • Changing file type during file compare not working properly.
  • DNC Protocols was not found (introduced in 4.1.0).
  • Could not start program from command line.
  • 'Mark changes only' in file compare setup not working.
Changes in CIMCO DNC-Max 4.10.01
  • Added support for sending E-mail notifications.
  • Added timeout to Mazak ISO send end of feed data.
  • Improved Mazatrol file import.
  • Changed Mazak protocol to accept ISO files with CRLF as EOB sequence.
  • Fixed problem with the alignment of relative paths in directory listings.
  • Fixed problem with using long Mazatrol program names containing only digits.
CIMCO Software 4.10.00 PreviewReleased: Unknown
Changes in CIMCO Edit 4.10.00
  • Added option to show a dialog indicating the number of replaced strings.
  • Updated some German translations.
  • When opening files from windows explorer, editor is now moved to front.
  • Selecting window to compare with showed untitled files as empty entries.
CIMCO Software 4.06.30 PreviewReleased: Unknown
Changes in CIMCO DNC-Max 4.06.30
  • Fixed problem with remote requesting programs on Mazak T2 controls.
CIMCO Software 4.06.29 PreviewReleased: Unknown
Changes in CIMCO DNC-Max 4.06.29
  • Added "Use start of feed information" / "Use end of feed information" to the directory listing setup.
CIMCO Software 4.06.28 PreviewReleased: Unknown
Changes in CIMCO DNC-Max 4.06.28
  • Fixed problem with disabling "Send after auto received".
  • Fixed problem with disabling feed data before/after reports.
CIMCO Software 4.06.27 PreviewReleased: Unknown
Changes in CIMCO DNC-Max 4.06.27
  • Added $SENDFILE, $SENDDIR and $SENDPATH to environment when sending a file (makes it possible to insert the filename in the start and/or end of feed data).
  • Added option to verify matching pairs of start and end triggers when receiving multiple programs into the same file using a runner.
  • Changed $RECVCOUNT to hold number of programs received, when receiving multiple programs into the same file using a runner. Notice: $RECVCOUNT also contains number of programs received when using "multi file reception".
  • Moved "Ignore start/end trigger in file", "Do not save start/end data", "Do not omit string/lines" and "Do not change last line feed" when using a runner, to a sub sheet of the auto receive setup, so these options a now individually configured for each remote request set. Notice: Old configurations are auto updated.
  • Fixed problem with directory listings in the Fanuc Filemate protocol.
CIMCO Software 4.06.26 PreviewReleased: Unknown
Changes in CIMCO DNC-Max 4.06.26
  • Minor changes to the Fanuc Filemate protocol.
CIMCO Software 4.06.25 PreviewReleased: Unknown
Changes in CIMCO DNC-Max 4.06.25
  • Fixed problem with reception of some files in Heidenhain FE mode. A incorrect checksum error was reported.
  • Removed debugging message from LSV2 protocol (log would be filled with "Sleeping 15" or similar message).
CIMCO Software 4.06.24 PreviewReleased: Unknown
Changes in CIMCO DNC-Max 4.06.24
  • Fixed Heidenhain FE mode protocol to allow transmission of files without extension.
CIMCO Software 4.06.23 PreviewReleased: Unknown
Changes in CIMCO DNC-Max 4.06.23
  • Changed Heidenhain FE mode protocol to allow transmission of files without extension.
  • Fixed GPF in Mazak protocol in manual/remote request mode.
CIMCO Software 4.06.22 PreviewReleased: Unknown
Changes in CIMCO DNC-Max 4.06.22
  • Added support for handheld terminals.
  • Fixed problem with directory information was omitted from generated backup path when receiving files using a runner.
CIMCO Software 4.06.21 PreviewReleased: Unknown
Changes in CIMCO DNC-Max 4.06.21
  • Fixed problem with manual send (was disabled). Introduced in 4.06.20.
CIMCO Software 4.06.20 PreviewReleased: Unknown
Changes in CIMCO DNC-Max 4.06.20
  • Fixed problem with 'Send file advanced' from block/tool number when start and end trigger was identical.
CIMCO Software 4.06.19 PreviewReleased: Unknown
Changes in CIMCO DNC-Max 4.06.19
  • Added option to specify list of available serial ports. Set the GLOBAL/SHOWPORTS option to 0 to auto detect ports, or a value >0 to manually specify available ports. Notice: server must be restarted after changing this option.
  • Fixed problem with extracting directory information from auto received programs in the standard protocol. (Introduced in 4.06.18)
CIMCO Software 4.06.18 PreviewReleased: Unknown
Changes in CIMCO DNC-Max 4.06.18
  • Added Fanuc Filemate support to the standard protocol.
  • Fixed problem with new "Max scan lines" option in the standard protocol.
CIMCO Software 4.06.17 PreviewReleased: Unknown
Changes in CIMCO DNC-Max 4.06.17
  • Fixed software handshake problem in Heidenhain FE mode on old control models.
CIMCO Software 4.06.16 PreviewReleased: Unknown
Changes in CIMCO DNC-Max 4.06.16
  • Changed timeout in Mazak protocol to use a longer timeout when CTS is low.
  • Fixed problem with new max scan line option in standard protocol. It would default to 1 line when upgrading existing systems.
CIMCO Software 4.06.15 PreviewReleased: Unknown
Changes in CIMCO DNC-Max 4.06.15
  • Added option to specify how many lines should be scanned for remote requests. (standard protocol)
  • Added information about first directory searched in failed remote request to error log, and updated $RECVDIRNAME and $RECVPATH to first directory searched in failed remote request (used when sending failed remote request reports to the CNC operator).
  • Added support for sending programs fro older control models in the Mazak protocol (i.e. sending T32 programs to a Fusion control).
  • Added option to ignore triggers in remote request.
  • Added option to extract program name in auto receive before program start trigger.
  • Fixed problem with receiving ISO programs in Heidenhain FE mode from old control models.
  • Fixed software handshake problem in Heidenhain FE mode on old control models.
  • Fixed problem with resetting default file/directory in the Mazak protocol when adding new ports.
  • Fixed problem with Mazak Mazatrol files containing ISO programs. (bug introduced in 4.06.13)
  • Fixed problem with Mazak T64 ASCII comments. (bug introduced in 4.06.13)
CIMCO Software 4.06.14 PreviewReleased: Unknown
Changes in CIMCO DNC-Max 4.06.14
  • Added support for requesting Mazatrol programs by sending a ISO program (allowing non-numerical program names on Mazak M1/M2).
CIMCO Software 4.06.13 PreviewReleased: Unknown
Changes in CIMCO DNC-Max 4.06.13
  • Added support for sending Mazak files in the following formats: BoxNet/Cimnet/DNet/Facit/GNT/Kumatronik/MDT/RWT/Seiki/Stella
  • Fixed Mazak T2 problem
  • Fixed 'Copy set' in remote request and auto receive configuration.
CIMCO Software 4.06.12 PreviewReleased: Unknown
Changes in CIMCO DNC-Max 4.06.12
  • Added support for sending shortcuts.
  • Changed Mazak M2 to use first Z offset as remote request parameter.
CIMCO Software 4.06.11 PreviewReleased: Unknown
Changes in CIMCO DNC-Max 4.06.11
  • Added 'Insert filename in comment' option in the Mazak protocol
  • Fixed problem with "empty" ports added when renaming a port.
  • Fixed problem with 'Test set' field in the standard protocol configuration, if the 'Append to prefix' option was selected.
CIMCO Software 4.06.10 PreviewReleased: Unknown
Changes in CIMCO DNC-Max 4.06.10
  • Added Mazak M1 support
CIMCO Software 4.06.09 PreviewReleased: Unknown
Changes in CIMCO DNC-Max 4.06.09
  • Fixed locked files problem in standard protocol.
CIMCO Software 4.06.08 PreviewReleased: Unknown
Changes in CIMCO DNC-Max 4.06.08
  • Updated installation.
CIMCO Software 4.06.07 PreviewReleased: Unknown
Changes in CIMCO DNC-Max 4.06.07
  • Added support for using program comment to generate filename for auto received files in Mazak protocol.
CIMCO Software 4.06.06 PreviewReleased: Unknown
Changes in CIMCO DNC-Max 4.06.06
  • Added 'Replace if found in request directory' option to auto receive sets.
  • Fixed problem with saving log files when regional codes used / as date delimiter.
CIMCO Software 4.06.05 PreviewReleased: Unknown
Changes in CIMCO DNC-Max 4.06.05
  • Added Fanuc RS-422 baud rates (76800 & 86400) to protocol configuration.
  • Added 'Keep info' option to the terminal tab in the administrator client. Select 'Keep info' to retain terminal window contents when the terminal tab is deactivated.
  • Added remote start from line/block or tool number. (standard protocol)
  • Added remote stop trigger. (standard protocol)
  • Changed port naming to allow non-letter/digit characters.
  • Changed port rename to also rename .mch file.
  • Fixed problem with block re-numbering in Heidenhain FE mode protocol, if files contained lines that was completely removed by the filtering options.
CIMCO Software 4.06.04 PreviewReleased: Unknown
Changes in CIMCO DNC-Max 4.06.04
  • Added 'Use slow acknowledge' option to the Heidenhain LSV-2 protocol. This option solves problems with overflows on the control, which would cause it to report "Ext. interface not ready" (or similar message).
  • Added transmission filter to Heidenhain FE mode protocol. The transmission filter supports: Omit lines, strip lines, renumbering and white space filtering.
CIMCO Software 4.06.03 PreviewReleased: Unknown
Changes in CIMCO DNC-Max 4.06.03
  • Added new Agie protocol that supports Agie Classic/Evolution/Innovation.
  • Added support for transmitting files using the "Griffo format" in the Mazak protocol.
  • Fixed problem with send file advanced from Line/Block/Tool number, if NC program contained empty lines. (standard protocol)
CIMCO Software 4.06.02 PreviewReleased: Unknown
Changes in CIMCO DNC-Max 4.06.02
  • Added option to specify network interface in administrator client configuration file (PARAM10).
CIMCO Software 4.06.01 PreviewReleased: Unknown
Changes in CIMCO DNC-Max 4.06.01
  • Added 'Always timeout after runner' option. (standard protocol)
  • Added runner file timeout option. (standard protocol)
  • Added 'Ignore start/end trigger' for files received with runner.
  • Added runner file expiration time. (standard protocol)
  • Added support for specifying directory names in directory list request. (standard protocol)
  • Added support for listing files with path relative to $DATA in directory listing. (standard protocol)
  • Fixed terminal color setup. Send and receive colors were swapped.
  • Fixed problem with Heidenhain LSV-2. Some controls sends logout after completing transmission, DNC-Max was always expecting an end of file message.
  • Fixed problem with characters above ASCII 127, remove option was inverted. (standard protocol)
CIMCO Software 4.05.10 PreviewReleased: Unknown
Changes in CIMCO DNC-Max 4.05.10
  • Added support for receiving multiple programs in one continuous stream. (standard protocol)
  • Added look ahead on auto receive and remote request triggers. This allows higher priority triggers to be activated, even if they are encountered later in the file, than lower priority triggers. (standard protocol)
  • Changed receive reports to generate a single report if multiple programs are received. (standard protocol)
  • Changed Mazak template to use unique file extensions for all program types.
  • Changed test fields in remote request configuration, the use of reserved names are now taken into consideration when evaluating the test fields. (standard protocol)
  • Removed log error message if file received is smaller than the minimum file size specified on the 'Receive' setup sheet. (standard protocol)
  • Fixed problems with path delimiters ('\') in receive reports. They are now replaced with the path delimiter character specified on the 'Machine Type' setup sheet. (standard protocol)
  • Fixed problem with first line not saved if file was auto received using runner files. (standard protocol)
  • Added 3 environment variables to receive reports: $TIMESTRIP, $DATESTRIP and $DATETIMESTRIP. These will expand to the current date and/or time without any formatting. Ex. $TIME = 02:12:34, $TIMESTRIP = 021234 (standard protocol)
  • Added $RECVFILESIZE environment variables. $RECVFILESIZE contains the size of the received files, previously only $RECVBYTES was supported, which contained the number of received bytes.
  • Fixed problem with separate directory triggers in auto receive and remote request programs. The last trigger found was used, but it should always be the first trigger found that is used. (standard protocol)
CIMCO Software 4.05.09 PreviewReleased: Unknown
Changes in CIMCO DNC-Max 4.05.09
  • Added 'runner file' support. (standard protocol)
  • Fixed problem with server shutting down in some cases if ESC was pressed.
CIMCO Software 4.05.08 PreviewReleased: Unknown
Changes in CIMCO DNC-Max 4.05.08
  • Added 'Fail if no end trigger found' option to standard protocol.
  • Fixed problem with transferring machine parameters from DNC to Mazak M2 controls.
CIMCO Software 4.05.07 PreviewReleased: Unknown
Changes in CIMCO DNC-Max 4.05.07
  • Updated installation
  • Added German LSV2 protocol documentation.
CIMCO Software 4.05.06 PreviewReleased: Unknown
Changes in CIMCO DNC-Max 4.05.06
  • Updated installation
CIMCO Software 4.05.05 PreviewReleased: Unknown
Changes in CIMCO DNC-Max 4.05.05
  • Added 'Send linefeed after trigger line' option to standard protocol configuration.
  • Added delay between lines and/or characters in Mazak ISO mode transfer configuration.
  • Changed sorting of directory list in standard protocol. Sub-directories are always shown first now.
  • Fixed problem with 'Found in set' field, in standard protocol configuration.
  • Fixed GPF in file open dialog preview on some files.
CIMCO Software 4.05.04 PreviewReleased: Unknown
Changes in CIMCO DNC-Max 4.05.04
  • Updated installation program
CIMCO Software 4.05.03 PreviewReleased: Unknown
Changes in CIMCO DNC-Max 4.05.03
  • Added 'Network Neighborhood' to directory selection dialog in protocol configuration.
  • Increased maximum number of remote request and auto receive sets from 8 to 64.
  • Fixed minor resource leak in DNC-Max server when starting administrator client from server console.
CIMCO Software 4.05.02 PreviewReleased: Unknown
Changes in CIMCO DNC-Max 4.05.02
  • Reduced AGIE LSV2 buffer size by 4 bytes according to documentation.
  • Updated German translations.
CIMCO Software 4.05.01 PreviewReleased: Unknown
Changes in CIMCO DNC-Max 4.05.01
  • Added option to check received file against file on server in std. protocol. File is not saved if they are identical.
CIMCO Software 4.04.07 PreviewReleased: Unknown
Changes in CIMCO DNC-Max 4.04.07
  • Added Agie LSV2 protocol.
  • Fixed problem with remote administration on Win2K. Client would sometimes report 'Connection to server lost' or 'Network busy'.
CIMCO Software 4.04.06 PreviewReleased: Unknown
Changes in CIMCO DNC-Max 4.04.06
  • Fixed problem with directory selection on remote servers.
  • Changed handling of software flow control in Heidenhain FE protocol.
CIMCO Software 4.04.05 PreviewReleased: Unknown
Changes in CIMCO DNC-Max 4.04.05
  • Directory listing in standard protocol now formats data more efficiently, saving space in listing.
  • Directory listing now uses 'Path delimiter' setting when transmitting path information.
  • Directory listing now uses 'Block number interval' when generating block numbers.
  • Fixed problem with handshake selection in Heidenhain FE. The setting was not saved correctly in the protocol configuration dialog.
  • Fixed problem with transmission abort in Deckel Dialog 4 protocol.
CIMCO Software 4.04.04 PreviewReleased: Unknown
Changes in CIMCO DNC-Max 4.04.04
  • Added 'Stop' button to Heidenhain FE Mode manual tab.
  • Added software/hardware handshake option in Heidenhain FE Mode configuration.
  • Added Heidenhain LSV2 protocol (was never included in 4.04.03).
  • Added Deckel Dialog 4 and Dialog 11 (both LSV2) protocols (were never included in 4.04.03).
  • Changed Heidenhain FE Mode protocol to be more flexible in case of communication breakdown or nonstandard machine configuration.
  • Fixed GPF when starting server without a \SYS directory.
CIMCO Software 4.04.03 PreviewReleased: Unknown
Changes in CIMCO DNC-Max 4.04.03
  • Added Heidenhain LSV2 protocol.
  • Added Deckel Dialog 4 and Dialog 11 (both LSV2) protocols.
CIMCO Software 4.04.02 PreviewReleased: Unknown
Changes in CIMCO DNC-Max 4.04.02
  • Added disk mode support to Mazak M2 protocol.
  • Added machine configuration backup. When port configuration is changed a 'Portname.bak' is now saved in the 'Machines' directory. If a port is deleted by mistake, copy the 'Portname.bak' file to 'templates\Portname.tpl' and add a port based on the new template.
  • Changed 'File Send' dialog. It is now possible to select multiple files to transfer (Standard and Mazak/ISO protocol).
  • Fixed problem with installation. No 'machines' directory was created, so no ports could be added to the server (introduced in 4.04.01).
CIMCO Software 4.04.01 PreviewReleased: Unknown
Changes in CIMCO DNC-Max 4.04.01
  • Fixed problem with manual Stop if data flow was stopped by hardware handshake in the Mazak protocol.
  • Added recent file/directory list on the Mazak manual tab.
  • Added disk mode support to Mazak T2 protocol.
  • Updated Mazak documentation (English).
CIMCO Software 4.03.09 PreviewReleased: Unknown
Changes in CIMCO DNC-Max 4.03.09
  • Fixed problem with remote requests from Mazak M2/T2 models.
CIMCO Software 4.03.08 PreviewReleased: Unknown
Changes in CIMCO DNC-Max 4.03.08
  • Added 'Select File'/'Select disk' to machine list popup menu for Mazak ports.
  • Standard protocol: If data is received during transmission, this data is used to start a reception when transmission ends normally or is stopped by data exceeding 'Break after receiving characters' setting.
  • Fixed problem with stop function in standard serial protocol introduced in version 4.03.07.
  • Disabled Send/Receive menus for Mazak ports where ISO transfer is disabled.
CIMCO Software 4.03.07 PreviewReleased: Unknown
Changes in CIMCO DNC-Max 4.03.07
  • Fixed problem when network connection to file server lost.
  • Fixed problem with stopping transmission in during XOff.
  • Fixed GPF in protocol configuration when selecting help multiple times.
CIMCO Software 4.03.06 PreviewReleased: Unknown
Changes in CIMCO DNC-Max 4.03.06
  • Fixed problem with sending all programs from DNC to TNC on Heidenhain 355.
CIMCO Software 4.03.05 PreviewReleased: Unknown
Changes in CIMCO DNC-Max 4.03.05
  • Added ISO transfer support to the Mazak protocol.
  • Fixed 'Send File Advanced' menu was always grayed (bug introduced in 4.03.04).
  • Fixed problem with manual file transfers in the Mazak protocol.
CIMCO Software 4.03.04 PreviewReleased: Unknown
Changes in CIMCO DNC-Max 4.03.04
  • Added Mazak Mazatrol protocol.
  • Added option to select ports to control from administrator client.
  • Fixed problem with Heidenhain protocol on Windows 95 versions before OSR2.
  • Fixed problem with $PORTNAME in log file name.
  • Fixed problem with network neighborhood in directory selection control.
CIMCO Software 4.03.03 PreviewReleased: Unknown
Changes in CIMCO DNC-Max 4.03.03
  • Fixed problem with recent send/receive file menus.
  • Fixed problem with adding ports (introduced in 4.03.02).
  • Fixed problem with manually specified receive directories in the Heidenhain protocol.
  • Fixed checksum in Heidenhain error messages.
CIMCO Software 4.03.02 PreviewReleased: Unknown
Changes in CIMCO DNC-Max 4.03.02
  • Added status bar to server console
CIMCO Software 4.03.01 PreviewReleased: Unknown
Changes in CIMCO DNC-Max 4.03.01
  • Added option to limit size of directory list in Heidenhain protocol.
  • Added option to allow long filenames in Heidenhain protocol.
  • Added manual directory control to Heidenhain protocol.
  • Added option to show file sizes in bytes in Heidenhain protocol.
  • Updated English and German on-line help
  • Updated some German translations
  • Changed directory listing in Heidenhain protocol to ignore files containing spaces.
  • Changed directory listing in Heidenhain protocol to show correct amount of available drive space.
  • Fixed problem with receiving multiple files on Heidenhain 3xx series.
CIMCO Software 4.02.01 PreviewReleased: Unknown
Changes in CIMCO DNC-Max 4.02.01
  • Added support for EIA mode in the standard serial protocol.
  • Added support for ISO mode in the standard serial protocol.
  • Fixed problem with spaces in auto receive/remote request start triggers.
  • Fixed problem with Heidenhain directory listing
CIMCO Software 4.01.10 PreviewReleased: Unknown
Changes in CIMCO DNC-Max 4.01.10
  • Added support for auto detection of Fanuc style linefeeds (\CR\LF\LF).
  • Fixed problem in Heidenhain protocol. Requesting programs failed after first line in some cases.
CIMCO Software 4.01.09 PreviewReleased: Unknown
Changes in CIMCO DNC-Max 4.01.09
  • Changed save/send trigger lines configuration.
  • Updated documentation.
  • Fixed problem with handshaking during start of feed data.
CIMCO Software 4.01.08 PreviewReleased: Unknown
Changes in CIMCO DNC-Max 4.01.08
  • Added new Heidenhain template.
CIMCO Software 4.01.07 PreviewReleased: Unknown
Changes in CIMCO DNC-Max 4.01.07
  • Changed 'Ignore characters' in auto receive/ remote request to ignore not only between program start tag and program name, but also inside program name.
  • Fixed GPF in debug terminal window.
  • Fixed problem with empty strings in installation program. Any text that has not been translated is now shown in English.
  • Fixed problem with adding new ports from a template. $PORTNAME was not set during initial configuration.
  • Fixed problem when adding new ports. Configuration would sometimes report "Connection to server lost".
CIMCO Software 4.01.06 PreviewReleased: Unknown
Changes in CIMCO DNC-Max 4.01.06
  • Added individual last path and recent file list for all ports.
  • Added line wrap on very long lines in terminal.
  • Added option in DNCAdm.ini to disable remote administration in administrator client.
  • Added Heidenhain protocol.
  • Changed log message after completion of a transmission loop.
  • Changed feed data so no linefeed is send after last line.
  • Fixed problem with adding new ports from template. Directories were not created until the server was restarted.
  • Fixed problem with incorrect fields grayed in 'Transmit Delays' configuration.
  • Fixed problem with updating loop count in administrator file queue.
  • Fixed feed/speed emergency button problem when absolute feed/speed was selected.
  • Fixed problem with feed/speed controls not disabled during receive operations.
CIMCO Software 4.01.05 PreviewReleased: Unknown
Changes in CIMCO DNC-Max 4.01.05
  • Changed permission for regular users, they are no longer allowed to stop the server.
  • Directory listing requests were mistakenly matching trigger names with auto receive program names, and not remote request program names. So instead of sending in a remote request program requesting a special name, you had to send in a program with a special name. Directory listing requests now trigger on remote request program names. When upgrading from an existing installation using directory listings, please change directory request NC programs accordingly.
  • Fixed problem with 'Clear Stop Request'.
  • Fixed problem with 'Pause at end of current loop' and 'Stop at end of current loop' in standard protocol.
  • Fixed problem with restart position after, "Stop at tool change".
  • Standard protocol handshake timeout could not be set to 0 (disabling it). This is now fixed.
  • Fixed problem with character selector in standard protocol configuration - 'S' and 'T' were switched.
  • Fixed problem with icons in file dialog.
CIMCO Software 4.01.04 PreviewReleased: Unknown
Changes in CIMCO DNC-Max 4.01.04
  • Fixed problem with same server showing up multiple times in 'Select server list'.
  • Fixed standard protocol handshake timeout could not be set to 0 (disabling it).
  • Fixed problem with end loop trigger.
CIMCO Software 4.01.03 PreviewReleased: Unknown
Changes in CIMCO DNC-Max 4.01.03
  • Added 'Delay between characters' option to standard protocol.
  • Moved program icons to 'Profiles/All users'.
CIMCO Software 4.01.02 PreviewReleased: Unknown
Changes in CIMCO DNC-Max 4.01.02
  • Fixed problem with position of '%' indicator in 'Send Advanced' dialog.
CIMCO Software 4.01.01 PreviewReleased: Unknown
Changes in CIMCO DNC-Max 4.01.01
  • Added environment variables to feed data.
  • Added new variables: $FEEDRATE, $SPINDLESPEED, $LASTTOOL and $ACTIVETOOL To feed/speed adjustment option, and feed data.
  • Changed 'Send file advanced' to reset feed/speed to default when a new file is selected.
  • Fixed problem with file dialog. It was possible to enter a non-existing directory.
  • Fixed problem with .bat files not sorted correctly in file dialog.
CIMCO Software 4.00.07 PreviewReleased: Unknown
Changes in CIMCO Edit 4.00.07
  • Number of occurrences replaced in 'Replace all' now indicated in the status bar.
  • File type now set based on extension when loading files.
  • Setup split into two sheets.
  • Added option to specify left and right margin when printing.
  • Added support for Drag'N'Drop.
  • Added mark/delete range of lines.
  • When opening a registered file type from windows explorer and an instance of CIMCO Edit is already running, the file is opened in the existing editor.
  • Trailing zeros not ignored in file compare when at the end of the line.
  • Files containing space could not be opened from the command line.
  • File compare caused a GPF if files had more than 4096 differences.
  • Some lines are too long on the printer test page.
  • Error testing machine commands (always uses index 0).
  • Colors not always updated when changing color setup.
  • Some error messages updated.
  • Pressing shift, ctrl or alt would bring view back to cursor.
  • Splash screen disabled when starting program with an argument.
Changes in CIMCO DNC-Max 4.00.07
  • Fixed problem with administrator client not being locked in when started from locked console.
CIMCO Software 4.00.06 PreviewReleased: Unknown
Changes in CIMCO Edit 4.00.06
  • Fixed problem with receive start / end trigger.
  • About box, and setup moved to DLL's to reduce .exe size.
  • Corrected a few spelling errors, and ToolTips.
  • Changed reception CPS calculation.
Changes in CIMCO DNC-Max 4.00.06
  • Fixed variable values on manual reception.
  • Fixed if a line delay above 500 ms and 'send at end of reception' data was specified, reception would sometimes keep sending end of reception data.
  • Fixed problem with file dialog (OK button not working).
CIMCO Software 4.00.05 PreviewReleased: Unknown
Changes in CIMCO Edit 4.00.05
  • Added file compare.
  • Insert/remove block numbers on marked text continued to EOF.
  • Update of syntax coloring for block skip commands.
  • Changed files not marked with '*' when files are maximize.
  • XOn, XOff, and parity error char values now read on transmit. In prior versions these values were always set to default.
  • In some cases when save failed during a close, file was lost.
  • Line/Col now updated when tabbing through windows.
Changes in CIMCO DNC-Max 4.00.05
  • Added 'Ignore transfers smaller than' configuration field.
  • Added additional status info when looking for feed start point.
  • Added 'Report failed request'. If a remote request failed by not finding the specified program, this report can now be sent back to the control.
  • Fixed that lines were parsed for program name and remote request even though start trigger was not yet found in received data.
  • If remote request used reserved program names and a valid request was found before program name, the request was accepted. Fixed.
  • Fixed that reception ignored 'Do not save line with start trigger' and '... end trigger' and always saved lines containing trigger.
  • Fixed that omit string in string mode failed to remove string placed at end of data string.
  • Fixed that triggers in string mode would not find string, if string length was the same as line length.
  • Fixed that omit string in transmit in some cases did not work.
  • Fixed cases where a reception failed and incoming data was saved to the failed transfers directory, the report variable $RECVPATH incorrectly contained path to the incoming directory.
  • Fixed if you specified '.' in auto receive 'Accept other characters', and then proceeded to receive a file called ABC.DEF.GH, this program would incorrectly be saved as ABC.NC - it is now saved as ABC.DEF.NC. The same problem was solved for remote request filenames.
  • Fixed GPF when saving debug log.
CIMCO Software 4.00.04 PreviewReleased: Unknown
Changes in CIMCO Edit 4.00.04
  • Start/End feed string added in standard serial.
  • Added mouse wheel support.
Changes in CIMCO DNC-Max 4.00.04
  • Fixed send/advanced user defined feed before file was not sent.
  • Fixed if last line in file contained no linefeed, last line wasn't sent.
  • Fixed problem with showing files without extension in file dialog.
  • Fixed selecting server during add port (server list was empty).
  • Fixed select server dialog (list was not painted correctly).
  • Fixed default spindle speed/feed rates in 'Send File Advanced'.
  • Fixed machines not showing up in administrator.
  • Fixed problem when using large fonts.
CIMCO Software 4.00.03 PreviewReleased: Unknown
Changes in CIMCO Edit 4.00.03
  • 'Renum from' in setup block numbering now use 1-based lines.
  • Program name now shown in Task bar (was removed in 4.00.2).
  • Replace 'Something' with 'Something else' caused GPF.
  • Hot key to 'Match Case' in replace dialog changed to 'M' (US).
  • ODD and EVEN parity was swapped in 'Standard serial setup'.
  • Added German translation.
  • Extra linefeed added when receiving files.
Changes in CIMCO DNC-Max 4.00.03
  • Fixed problem with remote request reserved program names.
  • Fixed that dir list header and footer were not evaluated for $vars.
  • Fixed problem with '-' in ignore/accept in remote request and auto receive trigger.
  • Fixed problem with auto create directories on auto receive.
CIMCO Software 4.00.02 PreviewReleased: Unknown
Changes in CIMCO DNC-Max 4.00.02
  • Added 'Omit strings' during transmission.
  • Added skip lines in transmission.
  • Added 'Save file linefeed' option.
  • Changed machine list in administration, so machines are now sorted.
  • Fixed problem with directory selection with many directories.
  • Fixed problem with specifying receive linefeed characters.
  • Fixed problem with connection leak after re-scan in select servers.
  • Fixed problem with environment evaluation in paths.
  • Fixed problem with specifying the filename padding character.
CIMCO Software 4.00.01 PreviewReleased: Unknown
Changes in CIMCO DNC-Max 4.00.01
  • Initial release.