CIMCO Software 8 Releases

CIMCO Software 8.12.51 StableReleased: 03-05-23Register to download
Changes since previous version:
CIMCO Software 8.12.51
  • Change: Updated French translations.
CIMCO Edit 8.12.51
  • New: Added new option to password protect the editor on launch. Editor password can be set in Global Setup > Plugins.
  • Fix: Fixed a possible crash when using the legacy OSAI control.
  • Fix: Add missing help string for configuration paths button in Plugins dialog
CIMCO Software 8.12.49 StableReleased: 24-03-23Register to download
Changes since previous version:
CIMCO Edit 8.12.49
  • New: APT Filter: CYLNDR command is now supported.
CIMCO MDC-Max 8.12.49
  • Fixed: Fixed ExternIO JSON parser when an error condition was improperly compared.
  • Changed: Updated ModifyMonitorEvent() function for mariadb.
  • Changed: Mitsubishi EZSocket protocol generates CYCLESTART message to with HEEDHOLDOFF message.
CIMCO Software 8.12.48 StableReleased: 27-02-23Register to download
Changes since previous version:
CIMCO Edit 8.12.48
  • Fixed: Fixed an issue in Mazatrol Viewer where numbers were off by one decimal place to the right.
CIMCO MDC-Max 8.12.48
  • Fixed: Fixed ExternIO that stops running when main database outage occurs.
  • Fixed: Fixed issue with improperly loaded initial data (STX) when MDC is starting (Calculating).
CIMCO Software 8.12.44 StableReleased: 27-01-23Register to download
Changes since previous version:
CIMCO CNC-Calc 8.12.44
  • Change: It is now possible to use negative stock to leave in the Helix Cutting operation.
CIMCO NC-Base 8.12.44
  • Fix: Fixed issue with MSSQL database when programs on import queue were not displayed.
CIMCO Software 8.12.43 StableReleased: 22-12-22Register to download
Changes since previous version:
CIMCO CNC-Calc 8.12.43
  • Fix: Corrected error with the stock to leave in helix drilling.
CIMCO DNC-Max 8.12.43
  • Fix: Fixed FTP when MDTM command didn't return time for directories.
CIMCO NC-Base 8.12.43
  • Fix: Fixed long names of indexes for Oracle database.
CIMCO Software 8.12.42 StableReleased: 30-11-22Register to download
Changes since previous version:
CIMCO CNC-Calc 8.12.42
  • Fix: Fixed bug with lost compensation on arcs after joining.
  • Fix: Fixed compensation for ramp lead-in if it links compensated path.
CIMCO DNC-Max 8.12.42
  • Change: Auto-receive translators are applied before search for a program name.
CIMCO Software 8.12.41 StableReleased: 29-11-22Register to download
Changes since previous version:
CIMCO Edit 8.12.41
  • Fix: Fanuc Filter: Fixed an issue with G69 (coordinate rotation cancel).
CIMCO NC-Base 8.12.41
  • Fix: Fixed losing folder structure when editing program info. (S15865)
CIMCO Software 8.12.40 StableReleased: 08-11-22Register to download
Changes since previous version:
CIMCO Edit 8.12.40
  • Change: Increased maximum Mazatrol Viewer Decimals from 4 to 5 in Mazatrol Viewer setup.
CIMCO Software 8.12.39 StableReleased: 04-11-22Register to download
Changes since previous version:
CIMCO Edit 8.12.39
  • Fix: Fixed an issue with tool t0 not being ignored when ignore tool number 0 is enabled.
  • New: Updated APT filter to support DNTCUT and CUT as multiline commentary delimiters.
CIMCO DNC-Max 8.12.39
  • Fix: Fixed issue when programs couldn't be send from NCBase - showing error message 'Unknown port'.
  • Fix: Fixed FTP absolute path mode.
CIMCO Software 8.12.38 StableReleased: 30-09-22Register to download
Changes since previous version:
CIMCO Edit 8.12.38
  • Fix: Fixed problem with decimal count of variables in macro output when macro contains conditional statements.
  • Fix: Fixed a rare bug in DXF export.
  • Chg: Updated NC Filters.
CIMCO Software 8.12.36 StableReleased: 09-09-22Register to download
Changes since previous version:
CIMCO NC-Base 8.12.36
  • Fix: Fixed loosing folder structure when field folder option is used.
CIMCO Software 8.12.35 StableReleased: 16-08-22Register to download
Changes since previous version:
CIMCO MDC-Max 8.12.35
  • Fix: Fixed bug in MDC engine introduced by mistake in version 8.12.33.
  • Change: Updated ExternIO DB connector.
CIMCO Software 8.12.34 StableReleased: 15-08-22Register to download
Changes since previous version:
CIMCO Edit 8.12.34
  • Fix: Fixed an issue with decimal shifting in Mazatrol Viewer. (S15300)
CIMCO CNC-Calc 8.12.34
  • Change: Changed so Contour now makes leadin/out moves when Use Compensation on Roughing is selected.
CIMCO DNC-Max 8.12.34
  • Fix: Fixed crashing BK-Trans when sending binary files.
  • Fix: Fixed SQL mode of Flat file protocol.
CIMCO Software 8.12.33 StableReleased: 09-08-22Register to download
Changes since previous version:
CIMCO DNC-Max 8.12.33
  • Fix: Fixed problem when transmitting binary files. (S13207)
CIMCO MDC-Max 8.12.33
  • Fix: Fixed issue when MDC showed incorrect data after single machine self calculating. (S15184)
CIMCO Software 8.12.32 StableReleased: 22-07-22Register to download
Changes since previous version:
CIMCO Edit 8.12.32
  • Fix: Fixed Export to DXF tolerance issue.
  • Fix: Fixed an issue with arc directions not being reverted when using the Mirror NC Function.
CIMCO Software 8.12.31 StableReleased: 28-06-22Register to download
Changes since previous version:
CIMCO Edit 8.12.31
  • Change: Updated NC Filters.
CIMCO Software 8.12.30 StableReleased: 03-06-22Register to download
Changes since previous version:
CIMCO Software 8.12.30
  • New: Added Turkish translations.
CIMCO Edit 8.12.30
  • Fix: Fixed incorrectly reported Z rapid and cutting dimensions in toolpath statistics.
CIMCO MDC-Max 8.12.30
  • Fix: Fixed leaking web service connector.
CIMCO Software 8.12.29 StableReleased: 11-05-22Register to download
Changes since previous version:
CIMCO Edit 8.12.29
  • Fix: Fixed default Fanuc Multi Channel modes synchronizing with wrong M codes. (S12941)
  • Fix: Fixed default Okuma Multi Channel mode synchronizing with wrong P codes. (S12494)
  • Fix: Fixed a possible crash when using Heidenhain filter
  • New: Added support for non numeral labels in Heidenhain filter
  • New: Added support for Brother Control filter
CIMCO Software 8.12.28 StableReleased: 29-04-22Register to download
Changes since previous version:
CIMCO MDC-Max 8.12.28
  • Fixed issue when live protocol doesn't send initial data when another screen was opened by a same client. (S14102)
  • Fixed mariadb code page mapping for Turkish language. (S14102)
CIMCO Software 8.12.27 StableReleased: 20-04-22Register to download
Changes since previous version:
CIMCO Edit 8.12.27
  • Chg: Updated Roeders Heidenhain filter.
CIMCO DNC-Max 8.12.27
  • Fix: Fixed problem starting DNC-Service due to licensing issue.
  • Chg: Reverted Fanuc Focas delete file changes.
CIMCO MDC-Max 8.12.27
  • Fix: Fixed processing of message triggers.
CIMCO Software 8.12.25 StableReleased: 13-04-22Register to download
Changes since previous version:
CIMCO Edit 8.12.25
  • Fix: Fixed translate function not handling registers after G92 blocks. (S11693)
CIMCO MDC-Max 8.12.25
  • New: Added a feature to read limited data from Heidenhain iTNC530 without Option18. (S13973)
  • New: Added option [SMSSERVICE] MAXSENDTRY = 1. (S13971)
  • Chg: Removed limit of maximum 30 states in real-time DB tables of type timeline. (S14030)
  • Fix: Fixed incorrectly stored triggers of advanced message variables in database. (S13975)
CIMCO Software 8.12.24 StableReleased: 06-04-22Register to download
Changes since previous version:
CIMCO MDC-Max 8.12.24
  • Fix: Fixed potential application crash when DB connection was destroyed while worker threads were still running. (S13881)
  • Fix: Fixed issue with missing STX file in database when change of DST. (S13889)
CIMCO License Server 8.12.24
  • Fix: Fixed license server not honoring reservations. (S13862)
CIMCO Software 8.12.23 StableReleased: 28-03-22Register to download
Changes since previous version:
CIMCO Edit 8.12.23
  • Change: Updated Heidenhain Filter.
CIMCO Software 8.12.22 StableReleased: 18-03-22Register to download
Changes since previous version:
CIMCO MDC-Max 8.12.22
  • Change: Updated mtconnect protocol to be compatible with the v1.7 mtconnect agent. (S13798)
CIMCO Software 8.12.21 StableReleased: 15-03-22Register to download
Changes since previous version:
CIMCO MDC-Max 8.12.21
  • Fix: Fixed DB tables JOB/PROGRAM/OPERATOR when status was not filled in and therefore records were not finally closed. (S13632)
CIMCO Software 8.12.19 StableReleased: 03-03-22Register to download
Changes since previous version:
CIMCO MDC-Max 8.12.19
  • Fix: Fixed OPC assemblies when it didn't work for certain OPC servers. OPC is now automatically licensed during the install. (S13609)
CIMCO Software Manager 8.12.19
  • Fix: Fixed reservation issues. (S12867)
CIMCO Software 8.12.18 StableReleased: 24-02-22Register to download
Changes since previous version:
CIMCO Software 8.12.18
  • Change: Update Spanish translations.
  • Change: Update Portuguese translations.
CIMCO CNC-Calc 8.12.18
  • New: It is now possible to set the max output angle of toolpath arcs in the CNC-Calc configuration page in the editor.
CIMCO DNC-Max 8.12.18
  • Fix: Fixed crash of DNC server when auto import processes a file with no extemsion. (S13500)
CIMCO MDC-Max 8.12.18
  • Fix: Fixed issue when AD groups are corrupted when switching between user groups in MDC cient User setup configuration dialog. (S13426)
  • Fix: Fixed not saving disable button condition. (S13302)
  • Change: Updated SMS modem protocol. (S13220)
CIMCO License Server 8.12.18
  • Fix: Reservations no longer become corrupted when using AD criteria. (S12867)
CIMCO Software 8.12.15 StableReleased: 01-02-22Register to download
Changes since previous version:
CIMCO DNC-Max 8.12.15
  • Fix: Fixed BKTrans corrupting Mazatrol programs received from CNC control. (S13207)
CIMCO MDC-Max 8.12.15
  • Fix: Fixed and updated OPC Client (required .NET framework 4.8 or higher). Fixed HH protocol running in process. (S13100)
CIMCO Software 8.12.14 StableReleased: 25-01-22Register to download
Changes since previous version:
CIMCO Software 8.12.14
  • Change: Updated Portuguese translations. (S13068)
CIMCO Edit 8.12.14
  • Fix: Fixed desynchronization glitch of the toolpath and lines in the editor.
  • Fixed an issue where code disappears when editing in Okuma multichannel. (S8782)
CIMCO DNC-Max 8.12.14
  • Fix: Problem using splitscreen with BKTrans protocol. (S13154)
CIMCO MDC-Max 8.12.14
  • Update: Updated telnet protocol on port 4449. (S13052)
  • Fixed issue with 'LIVECOMPRESSION' in PC MDC client - MDC client didn't work reliably when enabled. (S13052)
  • Added detection of invalid client connections which are immediately terminated as unsupported protocol. (S13052)
  • Fix: Fixed bug in RT DB tables when records were not closed if time based update was enabled. (S13196)
CIMCO NC-Base 8.12.14
  • Fix: File note field not hidden after clearing file note. (S11692)
  • Fix: Custom queries not working when no machine group selected. (S13143)
  • Fix: Custom queries only returning every other result.
  • Fix: Fixed problem with extension not being updated when copying program to a different machine group. (S13105)
  • Update: Changed 'Cancel' on modify program dialog to prompt to continue. (S13168)
  • Fix: Mazatrol Smooth Milling file is viewed as a turning file when it is in the import queue. (S1810)
  • Update: Copy / Move vault mechanism updated. (S12976)
CIMCO Software 8.12.13 StableReleased: 11-01-22Register to download
Changes since previous version:
CIMCO Software 8.12.13
  • (Change): Updated Korean translations.
  • (Change): Updated Portuguese translations.
CIMCO Edit 8.12.13
  • (Fix): Fixed a possible crash after starting/closing Backplot when Advanced NC-Functions is disabled.
CIMCO MDC-Max 8.12.13
  • (Change): Updated WEB LIVE protocol to make it more robust. The legacy live port 4448 is now disabled by default (current live port 4449). Enable in dncmax.ini file, section [MDCMAX] LEGACYCONNECTOR = Yes (S9451)
CIMCO NC-Base 8.12.13
  • (Fix): NCBase permissions. (S12870)
  • (Change): Update NCBase preview to allow control characters.
  • (New): Logging of printing events triggered via NC-Base client added. (S11858)
  • (Fix): Fixed an issue where the "Modify All" button for NC-base program was not grayed out when the program is set to read-only, while the "Modify" button was. (S11695)
CIMCO Software 8.12.11 StableReleased: 08-12-21Register to download
Changes since previous version:
CIMCO Edit 8.12.11
  • (Fix): Fixed an issue with keyboard input, such as Ctrl+C and Ctrl+V, in Multi Channel Configuration dialog
  • (Fix): Fixed Multi channel not working when parameters SYNCTRIG and SYNCTRIGID are empty in a MAC file.
CIMCO CNC-Calc 8.12.11
  • (Fix): Chamfer corrected so it now shows message when splines are selected.
CIMCO DNC-Max 8.12.11
  • (Fix): Remote requests on DNC-Max now sends all sub-programs linked to the requested PGM. (S12442)
CIMCO MDC-Max 8.12.11
  • (Fix): Fixed bug in ExternIO response parser. (S12766)
  • (Fix): Fixed issue with DB tables when Calculation already filling them in and deleting of today records is in progress. (S12766)
  • (Change): Removed 'OUTPUT' clause in query inserting values to value tables when MSSQL is used. (S12729)
  • (Change): Updated Mitsubishi EDM protocol. (S12429)
CIMCO NC-Base 8.12.11
  • (Fix): Fixed an issue with user permissions when users cannot edit file notes. (S12789)
CIMCO Software 8.12.10 StableReleased: 15-11-21Register to download
Changes since previous version:
CIMCO MDC-Max 8.12.10
  • (Change): Improved ExternIO FTP feature.
CIMCO Software 8.12.09 StableReleased: 03-11-21Register to download
Changes since previous version:
CIMCO Software 8.12.09
  • (Chg): Updated Swedish translations.
CIMCO MDC-Max 8.12.09
  • (New): Added feature to allow to refresh ports daily at a specific time of day.
CIMCO NC-Base 8.12.09
  • (New): Added drag and drop of associated files to program vault, which copies the files. (S11845)
  • (New): Added right-click options on associated files to move / copy to their respective program vaults. (S11845)
  • (Fix): Fixed issue with option to add program vault being present when multiple associated files were selected despite program already having a program vault. (S11845)
  • (Fix): Vault infinity loop bug when adding vault with certain options fixed. (S12635)
CIMCO Software 8.12.08 StableReleased: 03-11-21Register to download
Changes since previous version:
CIMCO MDC-Max 8.12.08
  • (Fix): Fixed not working DB tables when triggered just by a message. (S12620)
CIMCO Software 8.12.07 StableReleased: 02-11-21Register to download
Changes since previous version:
CIMCO Software 8.12.07
  • (Change): Extended the maximum of allowed users in login control. (S12602)
CIMCO DNC-Max 8.12.07
  • (Change): Remote requested file found in ignore directories are now being ignored. (S4930)
  • (Fix): Fixed bug where if files with the same name appeared in different files, then only the first file would be considered. (S4930)
  • (Fix): Fixed blocked / locked directories. (S4930)
CIMCO NC-Base 8.12.07
  • (New): Added prompt to change vault root directory when restoring database backup. (S3683)
  • (Change): Required fields are now forced when manually accepting a program from the import queue. (S4482)
  • (Change): Accepting a program from import queue as (with a new now) now also properly moves associated files. (S4482)
CIMCO Software 8.12.06 StableReleased: 19-10-21Register to download
Changes since previous version:
CIMCO DNC-Max 8.12.06
  • (Fix): Fixed a performance issue of database connector and a stability of the connector when high number of results is fetched from database. (S12523)
CIMCO NC-Base 8.12.06
  • (Fix): Fixed an issue where program info in NCBase cannot be updated when running on MSSQL. (S12548)
CIMCO Software 8.12.05 StableReleased: 11-10-21Register to download
Changes since previous version:
CIMCO License Server 8.12.05
  • Switch algorithm implementations to avoid conflicting with the FIPS Algorithm Policy. (S11663)
CIMCO Software 8.12.04 StableReleased: 08-10-21Register to download
Changes since previous version:
CIMCO MDC-Max 8.12.04
  • New: Implemented UTF-8 support for ExternIO. (S12433)
  • Fix: Fixed an issue with web interface not working if single threaded engine is used. (S12453)
CIMCO NC-Base 8.12.04
  • New: Added possibility to define a default value for the predefined values for the database fields in NC-base. (S4549)
CIMCO License Server 8.12.04
  • Fix: Fixed "CimcoAD.dll cannot be loaded."
CIMCO Software 8.12.03 StableReleased: 07-10-21
Changes since previous version:
CIMCO DNC-Max 8.12.03
  • Fix: Fixed a problem with sending file in split view. (Introduced in 8.12.01)
CIMCO License Server 8.12.03
  • Fix: Fixed License Server crashing (Introduced in 8.12.02)
CIMCO Software 8.12.02 StableReleased: 06-10-21Register to download
Changes since previous version:
CIMCO Software 8.12.02
  • (Fix): Fixed an issue that could result in About dialog being rendered blank in certain cases.
CIMCO Edit 8.12.02
  • (Fix): Updated Download Latest Version to point to the correct version.
CIMCO DNC-Max 8.12.02
  • (Fix): Firewall exception rule for the Web Client is now automatically created when enabling Web Client (DNC or MDC). (S1805)
CIMCO MDC-Max 8.12.02
  • (Fix): Fixed crash of MDC client and MDC server. (S12412)
  • (Fix): Fixed issue with live ini file when old states related parameters were not cleared which lead to gaps in section and makes web interface to stop working. (S11833)
CIMCO License Server 8.12.02
  • (Fix): Switch algorithm implementations to avoid conflicting with the FIPS Algorithm Policy. (S11663)
CIMCO Software 8.12.01 PreviewReleased: 04-10-21Register to download
Changes since previous version:
CIMCO Edit 8.12.01
  • (Fix): Fixed an issue where tool paths were not drawn correctly in certain cases. (S11670)
  • (Fix): Fixed an issues where unordered macro formulas would use digit properties of the wrong formula. (S10999)
  • (New): Now outputs DUMP.DMP when CIMCO Edit crashes. (S9060)
  • (Fix): Fixed an issue where the Mazatrol Viewer would display incorrect characters in certain locales. (S11862)
  • (Improvement): "Send Data in current window" icon is now enabled for remaining protocols that can use this feature. If file is unsaved / untitled, a prompt to save the file before continuing is shown. (S5640)
CIMCO DNC-Max 8.12.01
  • (Fix): DNC-Max: Fixed a socket leak when using Active Directory login through Web Clients. (S11649)
  • (Fix): Fixed the DNC-Max crash on startup when OPC protocol machine exists. (S11617)
  • (Fix): Fixed Split-Window transfer not showing. (S11564)
  • (Fix): Now warns the user when the Focas DNC-MAX protocol fails to send certain characters. (S8352)
  • (Fix): Fixed a DNC MAX socket leak in the Brother HTTP protocol. (S7976)
  • (Fix): Fixed modifying program from DNCAdmin without access to the send/receive directory. (S9267)
  • (Fix): Added missing Modbus TCP protocol to Heidenhain serial Protocol. (S11010)
  • (Fix): Fixed issues where NC-Base Client would not receive correct information about DNC-Max port status, causing ports to appear unavailable for sending. (S1414)
  • (Improvement): Improved E-mail configuration only send subject message and checkmark. (S11407)
  • (New): Enabled web client HTTPS in DNC-Max. (S11178)
  • (New): Added interface to configure HTTPS through DNC-Max config. (S11178)
  • (New): Added option to generate self-signed SSL key and certificate. (S11178)
  • (New): Added extensions to generated certificate to ensure it is trusted by browser. (S11178)
  • (New): Added option to edit SAN and time span the certificate is valid for the self-generated certificate. (S11178)
  • (Fix): Success report in network protocol now has correct header on second and successive transfers. (S8980)
  • (Fix): Moved reset location to CloseReport. (S8980)
  • (Fix): Moxa device server connection hangs. (S8416)
  • (Fix): Disabled functions not supported by FOCAS in split window. (S6197)
  • (New): Added feature to import also e-mail filter from ini file in DNC/MDC server configuration. (S11820)
  • (Fix): IP Addresses of network-based machines now show correctly in Port settings. (S1433)
  • (Fix): IP Addresses now show correctly in DNC-Max Client. (S1433)
  • (New): It is now possible to sort the port usage in port settings by Serial port, Port name, IP address or port type by clicking the header in the Port settings in server configuration. (S1433)
  • (Fix): Fixed a command warning on DNC-MAX launch.
CIMCO MDC-Max 8.12.01
  • (Fix): Removed unused email.exe. (S11916)
  • (New): It is now possible to associate MDC-Max input to different variable message fields. (S11767)
  • (New): It is now possible to set MDC-Max full screen windows to be on top of all other windows. (S11769)
  • (New): Added a comment area to MDC-Max expression fields. (S6909)
  • (Fix): Fixed issue with DST change. (S8348)
  • (Fix): Fixed broken TEXTVARs. (S9692)
  • (New): Implemented a feature for value tables 'TEXTVAR[xxx] step back'. It allows to use TEXTVAR[xxx] instead of TEXTVARLAST[xxx] -> TEXTVAR is then properly evaluated on OPEN as well as on CLOSE condition. (S9692)
  • (Fix): Reimplemented XPATH parsing in the ExternIO and in the Flat file protocol. (S11223)
  • (Fix): Implmented advanced trigges to evaluate ExternIO result statuses. (S11394)
CIMCO NC-Base 8.12.01
  • (Improvement): NC-Base Client: File notes for NC-Base programs are now available as a template macro for templated generation of associated files. The template macro is $DBFILENOTE. (S5848)
  • (Fix): Fixed an issue where read-only would sometimes not also be applied to the file attribute in NC-Base files. (S1154)
  • (Fix): Fixed NCBase Merge Utility to work correctly with V8 database (works only with mariadb). (S10578)
CIMCO License Server 8.12.01
  • (Improvement): When unable to connect to License Server, the software will now say so explicitly. (S11655)
  • (Improvement): Stopped updating file modified time on LicenseOptions.json every time connection is established to a License Server. (S11655)
CIMCO Software 8.09.32 StableReleased: 16-08-22Register to download
Changes since previous version:
CIMCO MDC-Max 8.09.32
  • Fix: Fixed bug in MDC engine introduced by mistake in version 8.12.33.
  • Change: Updated ExternIO DB connector.
CIMCO Software 8.09.31 StableReleased: 03-06-22Register to download
Changes since previous version:
CIMCO MDC-Max 8.09.31
  • Fix: Fixed leaking web service connector.
CIMCO Software 8.09.30 StableReleased: 29-04-22Register to download
Changes since previous version:
CIMCO MDC-Max 8.09.30
  • Fixed issue when live protocol doesn't send initial data when another screen was opened by a same client. (S14102)
  • Fixed mariadb code page mapping for Turkish language. (S14102)
CIMCO Software 8.09.29 StableReleased: 21-04-22Register to download
Changes since previous version:
CIMCO MDC-Max 8.09.29
  • New: Added option [SMSSERVICE] MAXSENDTRY = 1. (S13971)
  • Chg: Removed limit of maximum 30 states in real-time DB tables of type timeline. (S14030)
  • Fix: Fixed incorrectly stored triggers of advanced message variables in database. (S13975)
CIMCO Software 8.09.28 StableReleased: 06-04-22Register to download
Changes since previous version:
CIMCO MDC-Max 8.09.28
  • Fix: Fixed issue with missing STX file in database when change of DST. (S13889)
CIMCO Software 8.09.27 StableReleased: 18-03-22Register to download
Changes since previous version:
CIMCO MDC-Max 8.09.27
  • Change: Updated mtconnect protocol to be compatible with the v1.7 mtconnect agent. (S13798)
CIMCO Software 8.09.26 StableReleased: 18-02-22Register to download
Changes since previous version:
CIMCO MDC-Max 8.09.26
  • Change: Using now sync unsubscribe method for OPC tags. (S13430)
  • Change: Updated SMS modem protocol. (S13220)
  • Fix: Fixed issue when AD groups are corrupted when switching between user groups in MDC cient User setup configuration dialog. (S13426)
CIMCO Software 8.09.25 StableReleased: 27-01-22Register to download
Changes since previous version:
CIMCO MDC-Max 8.09.25
  • Update: Updated telnet protocol on port 4449. (S13052)
  • Fixed issue with 'LIVECOMPRESSION' in PC MDC client - MDC client didn't work reliably when enabled. (S13052)
  • Added detection of invalid client connections which are immediately terminated as unsupported protocol. (S13052)
  • Fix: Fixed bug in RT DB tables when records were not closed if time based update was enabled. (S13196)
CIMCO Software 8.09.24 StableReleased: 12-01-22Register to download
Changes since previous version:
CIMCO MDC-Max 8.09.24
  • (Change): Updated WEB LIVE protocol to make it more robust. The legacy live port 4448 is now disabled by default (current live port 4449). Enable in dncmax.ini file, section [MDCMAX] LEGACYCONNECTOR = Yes (S9451)
  • (Change): Updated Web Client Shopfloor display
CIMCO Software 8.09.23 StableReleased: 08-12-21Register to download
Changes since previous version:
CIMCO MDC-Max 8.09.23
  • (Fix): Fixed bug in ExternIO response parser. (S12766)
  • (Fix): Fixed issue with DB tables when Calculation already filling them in and deleting of today records is in progress. (S12766)
CIMCO Software 8.09.22 StableReleased: 15-11-21Register to download
Changes since previous version:
CIMCO MDC-Max 8.09.22
  • (Fix): Removed 'OUTPUT' clause in query inserting values to value tables when MSSQL is used. (S12665)
  • (Change): Improved ExternIO FTP feature.
CIMCO Software 8.09.21 StableReleased: 03-11-21Register to download
Changes since previous version:
CIMCO MDC-Max 8.09.21
  • (Fix): Fixed not working DB tables when triggered just by a message. (S12620)
CIMCO Software 8.09.20 StableReleased: 27-10-21Register to download
Changes since previous version:
CIMCO MDC-Max 8.09.20
  • (New): Implemented UTF-8 support for ExternIO. (S12433)
  • (New): Feature: Reimplemented HTTP connector for ExternIO. Added new authentication methods: Digest, NTLM, Negotiate. (S8972)
  • (Fix): Reimplemented XPATH parsing in the ExternIO and in the Flat file protocol. (S11223)
  • (Fix): Implemented advanced triggers to evaluate ExternIO result statuses. (S11394)
  • (Fix): ExternIO: Known $HTTPHEADERxxx environment variables are initialized to empty strings. Debug data is printed also when request over web service failed. Fixed bug in ExternIOHost HTTPACCEPPT -> HTTPACCEPT. (S10718)
CIMCO Software 8.09.19 StableReleased: 28-09-21Register to download
Changes since previous version:
CIMCO DNC-Max 8.09.19
  • (Fix): Moxa device server connection hangs. (S8416)
CIMCO Software 8.09.18 StableReleased: 24-09-21Register to download
Changes since previous version:
CIMCO Edit 8.09.18
  • (Fix): Fixed an issue where tool paths were not drawn correctly in certain cases. (S11670)
CIMCO DNC-Max 8.09.18
  • (Fix): Fixed modifying program from DNCAdmin without access to the send/receive directory. (S9267)
CIMCO MDC-Max 8.09.18
  • (Fix): Removed unused email.exe. (S11916)
  • (Fix): MTConnect subscription mode now correctly only maintains 1 open socket. (S10609)
  • (Fix): Fixed issue when a TIMERSTARTED[xxx] expression is set to true when port state is loaded from a cache file and the timer is in state 'running'. (S11318)
  • (Fix): Fixed issue with DST change. (S8348)
CIMCO Software 8.09.17 StableReleased: 09-08-21Register to download
Changes since previous version:
CIMCO Edit 8.09.17
  • (Fix) : Fixed previous going to next when searching in file. (S9704)
CIMCO DNC-Max 8.09.17
  • (Improvement) : Increased maximum length of preview field for auto import directory under auto import configuration for machine groups. (S7048)
CIMCO MDC-Max 8.09.17
  • (Fix) : Fixed inserting new row in value table if open row is not located. (S10481)
  • (Fix) : Fixed possible crash when generating timeline with empty machines being removed. (S10673)
  • (Fix) : Added support for FQDM for modbus connections. (S11366)
CIMCO NC-Base 8.09.17
  • (Improvement) : NC-Base Client will no longer use last entered user comment when the user saves an edited program file, but rather ask the user for a comment if applicable. (S7597)
CIMCO Software 8.09.16 StableReleased: 16-06-21Register to download
Changes since previous version:
CIMCO Software 8.09.16
  • (Fix) : Fixed database scheme version not being read under certain conditions. (S10335)
CIMCO MDC-Max 8.09.16
  • (Fix) : Fixed issue when fast changes were not sent to clients. As a result of this buttons on operator screens were incorrectly updated and remained in incorrect state. (S10121)
  • (Fix) : Fixed Operator screen button DB query not defaulting to database type used by system. (S10340)
CIMCO Software 8.09.15 StableReleased: 08-06-21Register to download
Changes since previous version:
CIMCO Edit 8.09.15
  • (Fix) : Fixes a possible crash when converting all lines to uppercase or lowercase. (S9447)
CIMCO DNC-Max 8.09.15
  • (Fix) : Corrected IoLogic Message Low/High dialog when using Danish language. (S8741)
  • (Fix) : Fixed a memory leak in a dncmax external Excel log. (S9333)
  • (Fix) : Fixed max count of email groups displayed in DNCAdmin email/sms setup dialog. Max count of groups is 2048. (S8511)
CIMCO MDC-Max 8.09.15
  • (Fix) : Fixed cases where real-time value tables would popluate incorrect while triggering full data rebuild. (S9755)
  • (Fix) : Fixed a memory leak when Excel/CSV file used for job information. (S10010)
  • (Improvement) : Updated PMC configuration dialog. Added option to format the MSGVAR1 value. PMC can now report also 0 values. (S7744)
  • (Improvement) : MTConnect alarm update: when no any alarm description is available then we will use alarm name instead. Added support of reading Alarm nodes (Haas NGC control). (S9586)
  • (Fix) : MDC operator button query function will now correctly deafult to the configured NC-Base if not specified otherwise. (S9496)
  • (Fix) : MDC Web client will no longer become unresponsive when using operator screen db query with empty query result set. (S9496)
CIMCO Software 8.09.14 StableReleased: 10-05-21Register to download
Changes since previous version:
CIMCO Software 8.09.14
  • S9001 - Feature: Added popup when no suitable MSSQL ODBC driver is detected.
  • S8788 - Fix: Strengthened database schema with regards to real-time value tables.
  • S8640 - Fix: Improved used of parameters for database queries.
CIMCO Edit 8.09.14
  • S7416 - Fix: Fixed an issue where the printed text colors did not match the colors in CIMCO Edit
  • S7414 - Fix: Fixed an issue where printing a document with 'Use colors' disabled would result in blue colored text
CIMCO CNC-Calc 8.09.14
  • T3130 - Fix: Fixes CNC-Calc not being able to print
  • T3131 - Fix: Fixes an issue where the printed result was not centered on the paper
  • T3132 - Fix: Fixes a possible crash when resizing the Editor window.
  • T3133 - Fix: Fixes a crash when trying to print a zero width or zero height document
  • T3134 - Fix: Fixed possible error when zooming in drawing.
CIMCO MDC-Max 8.09.14
  • S9258 - Fix: Fixed a bug in value table's record binding when Oracle is used.
  • S8940 - Fix: Under certain conditions during backdating on MSSQL, real-time DB table regeneration for a port might be terminated.
  • S9321 - Fix: Fixed evaluating of CNCINFOTEXT[...] in livescreens.
  • S9399 - Fix: Fixed a bug when a wrong default TCP port was used for database connectors.
CIMCO NC-Base 8.09.14
  • S9063 - Fix: Fixed some query logic when using Alternate Names together with MariaDB or Oracle.
CIMCO Software 8.09.13 StableReleased: 26-03-21Register to download
Changes since previous version:
CIMCO CNC-Calc 8.09.13
  • Fixed crash when closing non-saved drawing.
CIMCO MDC-Max 8.09.13
  • Fixed issue when user permissions for Tables /graphs are reset when Tables/Charts configuration is closed by 'Save only' button.
  • Fixed issue with ExternIO DB type.
  • Fixed bug in a legacy live protocol which caused that data on live screens was not updated.
  • Fixed bug in MTConnect protocol with Haas NGC MTConnect agent.
CIMCO Software 8.09.12 StableReleased: 12-02-21Register to download
Changes since previous version:
CIMCO Edit 8.09.12
  • Num filter: Fix M0 blocker.
  • Num filter: Fix peck drilling.
  • Num filter: Fix jump code G79
  • Num filter: Gix G66 and G33
  • Siemens filter: Support shortened barnch macro synatax in the form: IF cond GOTO lbl
  • Siemens filter: Support 'PROC' definition
  • Turning simulation: Corrected y-parameter issue
  • Haas filter updated
  • Fixed an issue where the Editor could fail to save overwriting existing files on some network shares.
  • Changed a crash in ISO / Heidenhain Converter when using invalid NC-Code into an error message.
CIMCO MDC-Max 8.09.12
  • Updated Heidenhain protocol setup UI to display all supported models. Added option to 'Not use connect request method' when connecting to TNC 640 prior version 340590 08 SP5 that could lead to a crash of the CNC.
  • Fixed ExternIO HTPP header parameters.
  • Added option to export / import translations from / to 'Excel' and 'CSV (;)'
  • Fixed issue in realtime database tables of type 'Timeline' when some rows where not properly closed.
  • ExternIO implements 'Transfer-Encoding: chunked'. ExternIO can parse HTTP header to $ environment variables as $HTTPHEADER.... E.g.: Header parameter Transfer-Encoding -> '$HTTPHEADERTransferEncoding' (the dash sign has to be removed)
  • Removed hard coded limit for lines read from a CSV file (limited to 65536 lines)
  • Fixed issue with inconsistency between operator list in MDC client and web client.
CIMCO NC-Base 8.09.12
  • Corrected MSSQL UTF conversion where monitorlogarchive.filedata if it has [text] type
  • Added check for primary key before upgrading database to UTF
  • MSSQL usage is now limited to newer ODBC drivers: msodbcsql17.dll;msodbcsql13.dll;msodbcsql11.dll. This can be changed in the .ini file section [NCBASEMSSQL]. Older drivers are not compatible with CIMCO MSSQL database scheme.
CIMCO Software Manager 8.09.12
  • Updated untranslatable labels to be translatable.
CIMCO Software 8.09.11 PreviewReleased: 12-01-21Register to download
Changes since previous version:
CIMCO MDC-Max 8.09.11
  • MTConnect protocol: Improved multiple alarms handling, added support for Hurco agents, added utf8 detection.
  • Fixed bug when ExternIO DB type was not properly loaded.
  • Fixed issue when MDC messages with a same timestamp caused incorrectly 'closed' records in real-time DB tables.
  • Added option to load job lists from external databases.
  • Implemented maximum value action for counters.
  • MDC UI setup sheets of timers, counters, switches,... reordered based on a real order of processing them in the MDC engine.
  • Removed limit of $EVENTDESC environment variable (previously 256 characters).
  • Fixed incorrect splitting of long SMS when 'Generic SMS modem (AT)' is selected.
CIMCO NC-Base 8.09.11
  • Fixed an issue where import queue entries for associated files could not be rejected if the main program file for the program was not on the queue.
  • Fixed crash when exporting program list.
CIMCO Software 8.09.10 StableReleased: 14-12-20Register to download
Changes since previous version:
CIMCO Edit 8.09.10
  • Turning solidsimulation now respects orientation configuration.
  • Added siemens code converter
  • Fixed issue where 'Search All' would not jump to next open file.
CIMCO CNC-Calc 8.09.10
  • Fixed general crash when using CNC-Calc.
CIMCO NC-Base 8.09.10
  • Corrected issue where upgrade of older databases would fail.
CIMCO Software 8.09.09 PreviewReleased: 23-11-20Register to download
Changes since previous version:
CIMCO CNC-Calc 8.09.09
  • Fixed general crash when using CNC-Calc.
CIMCO Software 8.09.08 PreviewReleased: 19-11-20Register to download
Changes since previous version:
CIMCO Edit 8.09.08
  • Added option to specify multiple machine orientations: It is now possible to specify multiple configurations for orientation. Each configuration, except for the default generated one, may be supplied trigger text. A configuration is selected if the trigger text is found in the opened file. In the case of multiple matches, the first specified configuration in the list is always chosen.
  • Added option to generate a tool list for all open files.
  • When selecting 'Always show all files' all files are now correctly shown in the file dialog.
  • Corrected multiple prompts to NC-Base login when running embedded DNC-Max client.
CIMCO CNC-Calc 8.09.08
  • Added contour ramping.
CIMCO DNC-Max 8.09.08
  • Fixed issue when emails were not sent when configuration has a high number of email groups (about more than 600 groups)
  • Fixed issue when using Moxa 2210.
CIMCO MDC-Max 8.09.08
  • Fixed issue when emails were not sent when configuration has a high number of email groups (about more than 600 groups)
  • Fixed issue when web license was not released due to no ping received within 20 seconds.
  • Added limitation of live data refresh rate for live screens to max 3 refresh per second.
  • Improved evaluating of MDC status text.
  • Flat file protocol allows now to use $ environment variables for file path.
  • Corrected Heidenhain DCOM not being able to access some functions for data reading.
CIMCO Software 8.09.07 StableReleased: 29-10-20Register to download
Changes since previous version:
CIMCO NC-Base 8.09.07
  • Fixed missing mysql_upgrade
CIMCO Software 8.09.06 PreviewReleased: 26-10-20Register to download
Changes since previous version:
CIMCO MDC-Max 8.09.06
  • Rolling timeline now shows todays date, not the date the timeline was started.
  • ExternalIO Webservice: Added option to define custom header fields
CIMCO NC-Base 8.09.06
  • Fixed a crash when a user had permissions to more than 256 machinesgroups.
  • Copying files to local drive is now able to handle files on the import queue. If the queue is viewed and the option to copy to local location is used, it will send the temporary file from the queue, not the latest approved one.
  • Fixed issue in Editor auto-upgrade feature.
CIMCO Software 8.09.05 PreviewReleased: 13-10-20Register to download
Changes since previous version:
CIMCO Edit 8.09.05
  • Macro conditional statement now support literals and \CR to insert new lines in false/true statement.
CIMCO MDC-Max 8.09.05
  • Timeline: Corrected rolling timeline not updating when viewed in full screen.
  • Fixed issue with reports with a fixed time range were incorrectly adjusted.
CIMCO Software 8.09.04 PreviewReleased: 05-10-20Register to download
Changes since previous version:
CIMCO Edit 8.09.04
  • Closing filecompare now resets NC-Assistant to previous state.
  • Added option to sort filetypes alphabetically.
  • Implemented auto update of Editor with activated ncbase link.
  • Added option to copy an entire macro group from one filetype to others.
  • Added conditinal statement to macro.Format is $IF ? : . The <,>,=, <=, >= operators can be used in the statement, as well as truelike.
CIMCO MDC-Max 8.09.04
  • Fixed issue with re-connecting in EZScoket protocol when a machine is switched off.
  • Improved handling of serialization of CNCINFO.
  • Timeline: Added more timemarks when zooming.
  • Timeline: Fixed timeline getting stuck if in fullscrene and trying to view machine state.
CIMCO NC-Base 8.09.04
  • Implemented auto update of Editor with activated ncbase link.
CIMCO Software 8.09.03 PreviewReleased: 30-09-20Register to download
Changes since previous version:
CIMCO Software 8.09.03
  • Enabled option to do direct execution of queries in database.
CIMCO Edit 8.09.03
  • Fixed detection of mazatrol files.
  • Fixed 'Search All' button not enabling.
CIMCO DNC-Max 8.09.03
  • Fixed sending files from UNC paths via FOCAS FTP Hybrid protocol.
CIMCO MDC-Max 8.09.03
  • Web Client: Enabled client side cache of shop floor views.
  • Web Client: Enable use of environment variables MCHVAR1-4, PORTNAME,NCBASEID, PORTID, DNCMAXGROUP,NCBASEGROUP,MDCMAXGROUP and NCBASEGROUPID when doing button database query.
  • Fixed issue in ExternIO UI that could lead to a crash of the MDC client.
  • Improved error handling in EZSocket protocol when common variables are used.
CIMCO NC-Base 8.09.03
  • Custom user tables are no longer overwritten during database update.
CIMCO Software 8.09.02 PreviewReleased: 21-09-20Register to download
Changes since previous version:
CIMCO Software 8.09.02
  • The active directory search interface now matches usernames on searches.
  • Added option to use direct execution of database queries.
CIMCO Edit 8.09.02
  • Code Convertion: Added CTX420
  • Mazatrol Viewer: Corrected PUSH, CHUCK and Z-offset display.
  • Backplot: Corrected turning retract issue.
CIMCO DNC-Max 8.09.02
  • Option to select file on the control after transferring it through FOCAS.
  • Option to transfer to the Data Server through FTP when transferring to a FANUC control with a data-server using FOCAS2. The mapping can be done from an arbitrary folder under FOCAS to an arbitrary folder over FTP.
  • Option to specify a dummy file on the CNC for DNC-Max to set as active program before performing directory clean on CNC.
  • FTP Server Port: Increased the limit on how long the root path for FTP Server ports can effectively be.
  • FTP Server Port: Corrected format of MDTM response.
  • Fixed issue with a pop up dialog 'Cannot load dll' during DNC server shut down when NCBaseLink is not active.
  • DNCMaxCtrl: Fixed issue in DNC telnet interface when MDC message was incorrectly recognize.
  • Implemented a new feature to set a sent program selected on a controller (for Heidenhain iTNC530).
CIMCO MDC-Max 8.09.02
  • Fixed bug in ExternIO host setup UI when DB credentials were not stored.
  • Mitsubishi EZSocket protocol can read now custom devices and common variables.
  • Introduced MDC Citizen protocol for M70LC/M730LC series.
  • Fixed incorrectly loaded machine color information used in graphic reports.
  • Corrected backdate selection dialog when using duration filter.
  • Corrected timeline schedules.
  • Implemented a new option to grab multiple pieces of information from MDC client user input field using triggers.
  • Fixed real-time DB tables JOB / PROGRAM / OPERATOR dont store init values in cache files properly.
  • Fixed issue when deleting MDC data ignored db tables shadowmonitorlog, monitorlogarchive and cachefiles.
  • Fixed issue in charts with incorrectly interpreted not initialized int value.
CIMCO NC-Base 8.09.02
  • Added command-line options to log in an NC-Base user on launch.
  • Added option to actively inform the user if a search in the NC-Base yields no results.
  • Added option to limit printing to a certain page range on a per-client basis.
  • Added a user group right possibility to block users from viewing programs not of status 'Approved'
  • Added an option to have two names for the same program in the NC-Base. The alternative name acts more or less identically to the normal program name when looking up programs, except for automatic modifications, such as through auto import and auto receive.
  • Added command line option to lock NC-Base Searches to a specific machine group for the Editor session. When showing ports in the machine group search dropdown, the lock can be applied as port name as well.
  • Added option to disable the need for the user to confirm sending a program to the CNC using DNC-Max.
  • Input focus will now automatically switch to search field for program name when launching the NC-Base Explorer.
  • Corrected cases where locking/unlocking and setting read/write state of received files failed.
  • NC-Base Client will once again run when the software is running in Demo mode.
  • Fixed export of no-name programs to NCBase.
  • Database Integretity can now run without deleting invalid references.
CIMCO Software 8.09.01 PreviewReleased: 13-07-20Register to download
Changes since previous version:
CIMCO Software 8.09.01
  • The active directory search interface now matches usernames on searches.
CIMCO MDC-Max 8.09.01
  • Fixed issue where live timeline would stop updating after midnight.
  • Improved update rate of rolling timeline
  • ExternIO: Added handling of JSON data.
  • Fixed bug in the backdating screen time filter.
  • Fixed issue in MSSQL connector when cache file is stored in the DB.
  • Corrected export to pie chart of live updating timeline.
CIMCO Software Manager 8.09.01
  • Database version 8.01.04
CIMCO Software 8.09.00 PreviewReleased: 29-06-20
Changes since previous version:
CIMCO Edit 8.09.00
  • New Solid Simulation module which supports 5-axis milling.
  • Corrected issue where HTML files could be printed as plain text.
  • Updated multi channel custom configuration. It is now possible to define a list of syncronization triggers with either pre-configured or extracted channel information.
  • Updated Mazatrol Viewer.
CIMCO MDC-Max 8.09.00
  • New MDC report automatically inherits 'view' user permission now.
  • Added minimum duration filter to backdate dialog.
  • Fixed issue with real-time db tables. When single machine recalculation was called all records were set to OPENED. Fixed issue when OPENED row was not found - > then the last matched OPENED row is used.
  • Added XML file parsing support into FlatFile protocol.
  • MDC formula can be used to set TEXTVAR variables including support for formatting.
CIMCO NC-Base 8.09.00
  • MSSQL and ORACLE are moved to unicode scheme. Update process can take longer than normal.
  • Files sent from NC-Base import queue is now sent using correct name, not the temporary filename.
CIMCO Software 8.08.13 StableReleased: 19-11-20Register to download
Changes since previous version:
CIMCO DNC-Max 8.08.13
  • Fixed issue when emails were not sent when configuration has a high number of email groups (about more than 600 groups)
CIMCO MDC-Max 8.08.13
  • Fixed issue when emails were not sent when configuration has a high number of email groups (about more than 600 groups)
  • Fixed issue when web license was not released due to no ping received within 20 seconds.
CIMCO Software 8.08.12 StableReleased: 23-10-20Register to download
Changes since previous version:
CIMCO NC-Base 8.08.12
  • Fixed a crash when a user had permissions to more than 256 machinesgroups.
CIMCO Software 8.08.11 StableReleased: 28-09-20Register to download
Changes since previous version:
CIMCO Software 8.08.11
  • Enabled option to do direct execution of queries in database.
CIMCO DNC-Max 8.08.11
  • Fixed sending files from UNC paths via FOCAS FTP Hybrid protocol.
CIMCO Software 8.08.10 StableReleased: 18-08-20Register to download
Changes since previous version:
CIMCO DNC-Max 8.08.10
  • Option to select file on the control after transferring it through FOCAS.
  • Option to transfer to the Data Server through FTP when transferring to a FANUC control with a data-server using FOCAS2. The mapping can be done from an arbitrary folder under FOCAS to an arbitrary folder over FTP.
  • Option to specify a dummy file on the CNC for DNC-Max to set as active program before performing directory clean on CNC.
CIMCO NC-Base 8.08.10
  • Added command-line options to log in an NC-Base user on launch.
  • Added option to actively inform the user if a search in the NC-Base yields no results.
  • Added option to limit printing to a certain page range on a per-client basis.
  • Added a user group right possibility to block users from viewing programs not of status 'Approved'
  • ADded an option to have two names for the same program in the NC-Base. The alternative name acts more or less identically to the normal program name when looking up programs, except for automatic modifications, such as through auto import and auto receive.
  • Added command line option to lock NC-Base Searches to a specific machine group for the Editor session. When showing ports in the machine group search dropdown, the lock can be applied as port name as well.
  • Added option to disable the need for the user to confirm sending a program to the CNC using DNC-Max.
  • Input focus will now automatically switch to search field for program name when launching the NC-Base Explorer.
CIMCO Software 8.08.09 StableReleased: 13-07-20Register to download
Changes since previous version:
CIMCO MDC-Max 8.08.09
  • Fixed issue where live timeline would stop updating after midnight.
  • Improved update rate of rolling timeline
  • Corrected export to pie chart of live updating timeline.
CIMCO Software 8.08.08 PreviewReleased: 18-06-20Register to download
Changes since previous version:
CIMCO MDC-Max 8.08.08
  • Fixed export of Average, Total and Targets to Excel. Fixed export of Targets to CSV.
  • Re-enabled hash of the MSGFIELD[x] when conversion to a number failed.
  • Fixed issue when ExternIO DB connector was initialized with incorrect parameters.
  • Heidenhain: Fixed evaluating of markers in Heidenhain traditional library. Fixed evaluating of program states for TNC640 for Native COM.
  • OPC UA: Fixed resolving an OPC variable when the filter equal and range type array is configured.
  • Netlink: Fixed reporting of 0 integer value.
  • Flat File: Improved reading flat file configuration. SQL column triggers now work with column names.
CIMCO Software 8.08.07 PreviewReleased: 09-06-20Register to download
Changes since previous version:
CIMCO Edit 8.08.07
  • Corrected error when saving file where file would appear locked by another process.
CIMCO Software 8.08.06 PreviewReleased: 04-06-20
Changes since previous version:
CIMCO Software Manager 8.08.06
  • Fixed License.dll appears corrupt error.
CIMCO Software 8.08.05 PreviewReleased: 03-06-20
Changes since previous version:
CIMCO Software 8.08.05
  • Improved DPI scaling.
CIMCO Edit 8.08.05
  • When changing configuration path, default option is changed to not copy existing configuration.
  • Macro: Added 10 up/down when moving macroes in list.
  • Macro: Fixed an issue where not all parameters in macros where copied correctly
  • Backplot: Added NUM Turning filter
  • Backplot Siemens filter: ROT/AROT compensatory movement fixed.
  • Improved Mazatrol file processing.
  • Fixed a rare crash when opening files on slow file systems.
CIMCO CNC-Calc 8.08.05
  • It is now possible to use the chosen compensation for roughing in contour milling.
  • Color configuration changed to reflect layers.
  • Measurement color removed
  • Export contour in turning now has correct coordinates.
  • Loading and saving of parameters title can now be localized.
  • String in cutoff turning has been corrected.
  • New mill Posts processors developed for Heidenhain model TNC530 and TNC640. These are the new type of posts that make extensive use of Custom Drill Fields to capture custom parameters. The DE denotes German and EN denotes English/US.
  • New post add to CNC-Calc. This is used to post programs to a Haas mill.
  • Bug with zero degree splines corrected.
  • Problem with wrong color in default layer corrected.
  • Zero degree splines drawn in the editor now becomes lines.
CIMCO DNC-Max 8.08.05
  • Fixed an issue where Remote Request would sometimes only work once per port restart.
  • Fixed issue with remote configuration of the DNC server when MDC messages were not properly loaded from database when NCBase is enabled.
  • Fixd resource leak when IOLogic E1200 goes offline.
  • Fixed issue with locked buttons when running as application
  • Fixed a crash of the DNC server during shutdown when IOLogic units are present.
CIMCO MDC-Max 8.08.05
  • Web Client: Corrected Shop Floors being created even if canceled.
  • Web Client: Corrected de-sync and unwanted disconnects between Web Server and Client.
  • Web Client: Added option to enable debug log from mdcweb.json configuration file.
  • Modbus: Fixed resource leak in modbus protocol.
  • IoLogic: Corrected Push-Button High->Low not working if cycle time was set greater than 1 second.
  • Reports: Added ability to chose report duration days from calender selector, instead of always using entire day, week or month.
  • Heidenhain: Updated machine state evaluator for TNC640. Fixed hanging of the Heidenhain Traditional library. Fixed DCOM protocol reporting an online machine as offline in some cases - added detection of this state + protocol restart when it happens.
  • Fanuc FOCAS: Updated FOCAS binaries.
  • Mitsubishi: Fixed issue with reading Alarms when EZSocket protocol was used.
  • Mitsubishi: Removed extra spaces from alarm description.
  • OPC UA: OPC Client added support for array range type.
  • ExternIO extended to work with general web API interface.
  • ExternIO host set extended with CODEPAGE_ parameter which is used in connection procedure to mariadb database. ExternIO tries to determine a correct code page automatically.
  • Fixed backdating screen when messages were not loaded from database.
  • Web live connector closes connections which don't receive PING command within 20s.
  • Fixed issue with MDC emails when parameter hostname was not read from ini file when email.exe was used.
  • Implemented an option for formatting values in automatic events (Emails/MDC messages).
  • Fixed issue when ExternIO set does not work if TEXTVAR with same name exists.
CIMCO NC-Base 8.08.05
  • Corrected issue when previewing inaccessible file on UNC share.
CIMCO Software Manager 8.08.05
  • Removed log entry grouping by date to fix the performance of the list
  • Now formatting the date of the log entries according to the user's date formatting preferences rather than the default for the language culture.
  • Fixed a crash when the License Server event log was stored on a remote computer.
CIMCO Software 8.08.03 PreviewReleased: 28-02-20Register to download
Changes since previous version:
CIMCO Software 8.08.03
  • Correced database inserts when database columns are out of order.
  • Database views are no longer targeted during convertion.
CIMCO Edit 8.08.03
  • Filter: Added support for Brother Speedio drilling patterns
  • Fixed the crash when starting the 'Compare file with file' functionality.
CIMCO MDC-Max 8.08.03
  • Added emptying of Program and Job setup list before (re)populating list during save.
  • Web Client: Web server and client location has moved from Http\MDCMax to WebClient directory
  • Web Client: Web client and server is now using Type Script
  • Web Clients: Dashboards can now be machine individual
  • Improved UpdateClient.exe to provide more information when update is not successful.
  • Fixed reading variables when comma is in the OPC Tag.
  • Fixed issue in Heidenhain protocol when all available TCP connections are exhausted during machine boot up.
  • Fixed email issue when exchange smtp server is used.
  • Fixed issue with incorrect size of job list dialog window on a 2nd display.
  • Corrected re-connect issue when using MSSQL and being disconnected for longer periods of time.
  • Fixed current state on the operator screen in thick MDC Client when option: multiple machines is used.
CIMCO Software 8.08.02 PreviewReleased: 30-01-20Register to download
Changes since previous version:
CIMCO MDC-Max 8.08.02
  • Fixed issue when button messages on operator screen get corrupted.
CIMCO Software 8.08.01 PreviewReleased: 13-01-20
Changes since previous version:
CIMCO Software 8.08.01
  • Database version 8.01.01
CIMCO MDC-Max 8.08.01
  • Added MONONLINE, MONOFFLINE messages into modbus protocol. Reset variables when the device is offline.
  • Fixed control mode check box in the Fanuc protocol.
  • Fixed wrong reading CNCTYPE from the configuration file in the Heidenhain setup dialog.
  • Fixed issue when ExternIO crashes when it receives as a payload containing more than 3956 characters.
  • Fixed issue when button messages for States / Indicators were not displayed in the state set setup sheet.
  • Corrected issue evaluating DBVAR and DATAVAR for tables reports if they were set before start of period.
  • Corrected using multiple TEXT[DATAVAR] in the same evaluator.
CIMCO NC-Base 8.08.01
  • Database version is now updated after every change applied. Before database version was updated at end of upgrade process.
  • Removed possibility to continue database upgrade if some upgrade script failed.
  • MSSQL collation correctly set to SQL_Latin1_General_CP1_CI_AS instead of database default.
  • Corrected upgrading MSSQL database with non-standard database names.
CIMCO Software 8.08.00 PreviewReleased: 13-12-19Register to download
Changes since previous version:
CIMCO Software 8.08.00
  • Database version updated to 8.01.00
CIMCO Edit 8.08.00
  • Fixed crash in open dialogs when having many filetypes with many file extensions configured.
  • Added a messagebox from filters that ask the user if he wants backplot to continue if a while/jump limit has been reached.
  • Multi channel View: Implemented automatic reordering of G13 and G14 statements for multichannel view, if Okuma(G13/G14) is selected.
  • FTP Transfer: The 'Send' button is now no longer grayed out when split screen is not selected
  • Added a config option under multi-channel print to disable printing of line numbers when printing in multi-channel mode.
CIMCO DNC-Max 8.08.00
  • Split Window: Fanuc file listing now shows O no. programs with leading zeroes
  • Fagor protocol: Program name is no longer overridden.
  • DNCMaxCtrl: Added a new switch, -drf (delete remote files) which allows for deletion of remote files, in the root or subdirectories
CIMCO MDC-Max 8.08.00
  • Improved ping function to check correctly a unique id returned in the icmp packet.
  • Default action for PDF report is to ask operating system to open file.
  • MDCMaxCmd can now export to CSV with the '/csv' switch
  • MDCMax now has a configuration to automatically close after a set number of minutes
  • Removed the id-number from copying external IO sets when a machine is selected during copying.
  • Fixed potential issue with reconnecting when database connection is used.
  • Added debug log messages for ExternIO XMLFILE.
  • Added reading of spindle loads in MTConnect, Focas and OPC protocols. CNCINFO is extended with new parameters: CNCINFO[LOADSPINDLE1] and CNCINFO[LOADSPINDLE2].
  • The ID column in the 'Load operator list from DB' now displays the users username, rather than their database table userid
  • Reimplemented LSV2 MDC protocol (Traditional library) for Heidenhain - supports iTNC530, TNC426/TNC430
  • Traditional library (LSV2 library) supports NC Events + PLC paths - can fully replace HeidenhainOCX
  • Implemented .NET wrapper for Heidenhain COM library - supports iTNC530, TNC640
  • The BrotherHTTP protocol can now be configured to monitor an arbitrary XPath on an arbitrary address/hostname, using the same type of configuration tab as OCP/MTConnect/etc., letting one monitor changes, thresholds, etc. as in the other protocols.
  • Flat file protocol extended with an option to poll data from SQL database (MySQL/MSSQL/ORACLE)
  • The 'Load Operator from DB' dialog now defaults to sorting by first name when opened. Clicking the header now sorts by userid, first name, etc.
CIMCO NC-Base 8.08.00
  • MariaDB: database is now in UTF8 format. Upgrading existing databases can take a while.
  • Oracle: Corrected syntax not compatible with older versions of Oracle database.
  • CIMCO Edit now notifies the user that the database has gone away.
  • The database search window now logs the user out and closes when the database goes away.
  • NCBase's List Export feature can now export the DNC-Max Port Name.
  • NCBase Client now has a configuration option to exclude the import queue search results in the regular explorer view.
CIMCO Software 8.07.17 StableReleased: 04-06-20Register to download
Changes since previous version:
CIMCO Software Manager 8.07.17
  • Fixed License.dll appears corrupt error.
CIMCO Software 8.07.16 StableReleased: 03-06-20
Changes since previous version:
CIMCO DNC-Max 8.07.16
  • Fixed issue with remote configuration of the DNC server when MDC messages were not properly loaded from database when NCBase is enabled.
  • Fixd resource leak when IOLogic E1200 goes offline.
  • Fixed a crash of the DNC server during shutdown when IOLogic units are present.
CIMCO Software 8.07.15 StableReleased: 23-04-20Register to download
Changes since previous version:
CIMCO DNC-Max 8.07.15
  • Fixed an issue where Remote Request would sometimes only work once per port restart.
CIMCO MDC-Max 8.07.15
  • Web Client: Corrected de-sync and unwanted disconnects between Web Server and Client.
  • Modbus: Fixed resource leak in modbus protocol.
  • IoLogic: Corrected Push-Button High->Low not working if cycle time was set greater than 1 second.
  • Web live connector closes connections which don't receive PING command within 20s.
CIMCO NC-Base 8.07.15
  • Corrected issue when previewing inaccessible file on UNC share.
CIMCO Software Manager 8.07.15
  • Removed log entry grouping by date to fix the performance of the list
  • Now formatting the date of the log entries according to the user's date formatting preferences rather than the default for the language culture.
  • Fixed a crash when the License Server event log was stored on a remote computer.
CIMCO Software 8.07.14 StableReleased: 28-02-20Register to download
Changes since previous version:
CIMCO Software 8.07.14
  • Correced database inserts when database columns are out of order.
  • Database views are no longer targeted during convertion.
CIMCO Edit 8.07.14
  • Fixed the crash when starting the 'Compare file with file' functionality.
CIMCO MDC-Max 8.07.14
  • Added emptying of Program and Job setup list before (re)populating list during save.
  • Corrected re-connect issue when using MSSQL and being disconnected for longer periods of time.
  • Fixed current state on the operator screen in thick MDC Client when option: multiple machines is used.
CIMCO Software 8.07.13 StableReleased: 30-01-20Register to download
Changes since previous version:
CIMCO MDC-Max 8.07.13
  • Fixed issue when button messages on operator screen get corrupted.
CIMCO Software 8.07.12 StableReleased: 13-01-20
Changes since previous version:
CIMCO Software 8.07.12
  • Database version 8.00.11
CIMCO MDC-Max 8.07.12
  • Fixed issue when button messages for States / Indicators were not displayed in the state set setup sheet.
  • Corrected issue evaluating DBVAR and DATAVAR for tables reports if they were set before start of period.
  • Corrected using multiple TEXT[DATAVAR] in the same evaluator.
CIMCO NC-Base 8.07.12
  • Database version is now updated after every change applied. Before database version was updated at end of upgrade process.
  • Removed possibility to continue database upgrade if some upgrade script failed.
  • MSSQL collation correctly set to SQL_Latin1_General_CP1_CI_AS instead of database default.
CIMCO Software 8.07.11 StableReleased: 13-12-19Register to download
Changes since previous version:
CIMCO Edit 8.07.11
  • Fixed crash in open dialogs when having many filetypes with many file extensions configured.
CIMCO MDC-Max 8.07.11
  • Improved ping function to check correctly a unique id returned in the icmp packet.
CIMCO NC-Base 8.07.11
  • Oracle: Corrected syntax not compatible with older versions of Oracle database.
CIMCO Software 8.07.10 PreviewReleased: 02-12-19Register to download
Changes since previous version:
CIMCO Edit 8.07.10
  • Mazatrol Viewer: Corrected Milling degrees when using 4 decimals.
  • Fixed crash when running in super minimal mode.
CIMCO DNC-Max 8.07.10
  • Fixed issue when DNC server randomly hangs durin startup when OEMLink and NCBaseLink are both enabled in some special cases.
  • Fixed issue with IOLogic units when no message is generated when the device is started.
  • Fixed issue with IOLogic setup sheet when MDC messages where still loaded from a file instead of DB.
CIMCO MDC-Max 8.07.10
  • Lists should no longer duplicate entries when saving configuration.
CIMCO NC-Base 8.07.10
  • Added upgrade step to new MariaDB version.
  • Removed individual connection from GMDCDBTable.
  • Reduced memory usage by ~200KB during database upgrade.
  • NC-Base - Fixed the size of the ncbase.imports.importinsby column.
CIMCO Software 8.07.09 PreviewReleased: 19-11-19Register to download
Changes since previous version:
CIMCO Edit 8.07.09
  • Mazatrol Viewer: Improved displaying of network lathe programs
  • Fixed an issue where the Editor would crash during Mirror operations when the folder C:\CIMCO didn't exist.
  • Filecompare will no longer highlight the rest of the line when a diff is found in the middle of the line.
  • Fixed a crash when changing filetypes on certain computers.
  • Added option to tile more than 9 open files.
  • Trying to open a deleted file that was previously backplottet will no longer create an empty file.
  • DNC-Max Client: Send/Recieve buttons are now correctly disabled when operations are not available.
  • DNC-Max Client now collapses groups properly on startup when the option is selected.
  • MultiChannel now supports non-consecutive channel numbers.
CIMCO DNC-Max 8.07.09
  • Fixed merging of sub-programs into main program when auto receiving them as associated files in Network Protocol and enforced linebreak before the inserted sub-program.
  • Web Client: Non-adminstrators can no longer disable ports.
  • FTP Server: Regular expressions at end of LIST commands is now stripped away.
  • Fixed the feature to clean target folder when transferring using FTP when the target folder was not modifiable, such as root directory.
  • Corrected issue where Log Export function would not evaluate enviromnent variables.
CIMCO MDC-Max 8.07.09
  • Haas NGC: Fixed crash of the DNC server due to a bug in Haas NGC protocol when a machine is about to switch off.
  • Web Client: Fix crash where machine sort would spin into an infinite loop.
  • Web Client: Fix bug where multiple DNC servers did not work properly if the hostname was supplied instead of the IP address.
  • Web Client: Fix bug where machines sometimes would show wrong status.
  • Web Client: Added link parameter for language selection. Example '?language=es-es'
  • Web Client: Fixed operator sub-screens not auto closing.
  • Web Client: Fixed dashboard max value for bar graph widgets not being machine individual.
  • Web Client: Live screen sorting changed to 'natural order'.
  • Web Client: Machine selection now supports using Machine Variables.
  • Web Client: Hidden controls are not hidden in web client.
  • Web Client: Corrected issue with wrong status shown on live screens.
  • Fixed issue with incorrect sync of MDC messages between DNC and MDC sub-systems. Messages are now stored in a new database table inside the MDC database.
  • Fixed issue with missing 3rd search field in a DB View after Report configuration was reopened.
CIMCO NC-Base 8.07.09
  • NC-Base Client: The NC-Base Client now only uses a license on the License Server while a user is logged on Auto Logoff of NC-Base Client now also works when notifications are disabled while the program does not have focus.
  • Corrected bad database query when trying to store filetypes in database.
CIMCO License Server 8.07.09
  • Improved responsiveness of the License Server on start to prevent the Windows Service Manager from timing it out.
CIMCO Software 8.07.08 PreviewReleased: 25-10-19Register to download
Changes since previous version:
CIMCO CNC-Calc 8.07.08
  • Corrected error with 'Start at Center' checkbox not being used.
CIMCO NC-Base 8.07.08
  • Changed NC-Base restore for MariaDB to use MySQL CLI. This fixes multiple issue with restoring a backup.
  • MSSQL: Improved disc usage and decrease time needed to update MSSQL database to current version.
CIMCO Software 8.07.07 PreviewReleased: 30-09-19
Changes since previous version:
CIMCO MDC-Max 8.07.07
  • Web Client: Fixed corruption of shop floor view configuration.
CIMCO Software 8.07.06 PreviewReleased: 10-09-19
Changes since previous version:
CIMCO MDC-Max 8.07.06
  • Fixed issue with MDC reports generated from a command line when a destination folder was deleted with all its content.
  • Removed text conversion from STR[] to upper case. Added option to use string comparison in live evaluators e.g. light indicators on live screens 'TEXT[OPERATOR]=STR[Martin]'
  • Corrected issue with daily archiving process.
CIMCO Software 8.07.05 PreviewReleased: 02-09-19
Changes since previous version:
CIMCO Edit 8.07.05
  • Backplot: Corrected 5-axis indexing using G68.
  • Backplot: Improved ability to use variables for Tool numbers and Work offset.
  • CIMCO Edit now allows printing via shell print.
  • NC-Assist: Corrected parameters being shown wrong on lines with multiple G codes.
CIMCO CNC-Calc 8.07.05
  • AdaptiveParameters now persist when changes are made to feedrates.
CIMCO DNC-Max 8.07.05
  • Fixed selecting multiple files when doing manual transfer.
  • Corrected sending client local files and preserving original file name.
  • DNC-Max client: Added option to auto-close application after period of inactivity.
  • Print: Added a field for specifying which file extensions should be printed using shell print.
CIMCO MDC-Max 8.07.05
  • Web Client: Corrected header when showing multiple columns in live screens.
  • Web Client: Add button functions for database queries.
  • Web Client: Applied optimizations for large installations.
  • MDC-Max setup should now refresh the configuration when 'Save without closing' is pressed.
  • MDC-Max client: Added option to auto-close application after period of inactivity.
  • Fixed issue when the expression in the MDC DB tables was too long.
CIMCO NC-Base 8.07.05
  • PNG and GIF should now be able to be displayed properly.
  • Fixed incorrect import of associated files when wild-char is used (e.g. '*', '?').
  • Fixed issue with auto-import of WPD projects when '.WPD' is not present in the folder name.
  • Autoimport should no longer scatter associated files in subfolders in the subfolder-in-subfolder case.
CIMCO Software 8.07.04 PreviewReleased: 22-08-19
Changes since previous version:
CIMCO Software 8.07.04
  • Updated German translation.
  • Bundled MariaDB version updated to 10.3
CIMCO Edit 8.07.04
  • Fixed a bug where closing tabs on mouse middle button would close the wrong tab
  • Fixed an issue where the Open Dialog did not maintain focus.
  • Improved case when trying to open multiple files from different folder. This is only possible using Advanced Open.
  • Fixed Regex and match whole word checkboxes in the replace dialog when ticking multiline
  • FTP view now correctly changes the default folder list when opening connection
  • Mazatrol Viewer: Fixed tool numbers, and unsupported functions.
CIMCO DNC-Max 8.07.04
  • FOCAS: Fixed receiving file with extension.
  • FOCAS: Fixed receiving file located in folder containing '.' .
  • Fixed incorrect auto-receive of Siemens WPD projects when a main program is alphabetically behind associated files
CIMCO MDC-Max 8.07.04
  • Fixed issue with multi-bar charts in HTML/PDF reports when only the first page of multiple pages was placed.
  • Fixed missing mapping type of operator real names from NCBase after update in v 8.05.00
  • Fixed issue with inconsistent data in reports sent in email when multiple mdcmax.exe/mdcmaxcmd.exe are running in the same time.
CIMCO NC-Base 8.07.04
  • Missing foreign keys relations were introduced for MySQL, MSSQL and Oracle.
  • Obsolete type 'text' fields in MSSQL were changed to 'varchar(max)', improving reading speed.
  • Corrected missing administrator rights when using login button in the status bar.
  • 'View Imported File' on program root item when 'Place associated files on the import queue' is enabled.
CIMCO Software 8.07.03 PreviewReleased: 01-08-19Register to download
Changes since previous version:
CIMCO Software 8.07.03
  • Added a new failure message with 'Invalid license key found!'
CIMCO Edit 8.07.03
  • Macro: Added escape for @. Typing @@ in macro definition will result in @ being inserted when using macro.
  • Transfer: Fixed first transfer was seen as failed.
  • Corrected issue when trying to replace in a file with wrapped lines.
CIMCO DNC-Max 8.07.03
  • Fixed issue with Directory Monitor port when export of the received file to import queue failed.
CIMCO MDC-Max 8.07.03
  • Fixed issue when SSL connection try was hanging forever when the TCP port didnt accept SSL connection.
CIMCO NC-Base 8.07.03
  • Fixed an entaglement of permission 'Print programs' and 'Set clearance levels'.
CIMCO Software 8.07.02 PreviewReleased: 15-07-19Register to download
Changes since previous version:
CIMCO MDC-Max 8.07.02
  • Fixed crash when MDC output functions was defined and running MDC-Max server.
CIMCO Software 8.07.01 PreviewReleased: 11-07-19Register to download
Changes since previous version:
CIMCO MDC-Max 8.07.01
  • OPC Client: Corrected missing dll needed for new OPC UA protocol implementation.
CIMCO Software 8.07.00 PreviewReleased: 10-07-19Register to download
Changes since previous version:
CIMCO Edit 8.07.00
  • Fixed issue with randomly created temp files when types are loaded.
  • Mazatrol Viewer: Corrected viewing PBM smooth files.
  • Corrected text color issue when 'Modal colors' is active.
  • Corrected issue when loading and saving filetypes.
CIMCO DNC-Max 8.07.00
  • Fixed renaming of DNC ports.
  • Fixed issue when main file was not properly selected in case a 'dot' is present in the folder name.
  • Fixed deleting temporary files in the Network protocol
  • Fixed issue with incorrectly placed receive reports for FTP protocol.
  • DNC-Max server can now send outputs to Moxa IoLogic devices.
  • Updated Network Input dialog.
CIMCO MDC-Max 8.07.00
  • MDC server can restart itself when a fatal error occured.
  • ExternIO can call extern process and parse output values pass to command line by the external process.
  • ExternIO can be executed periodically based on a given time period.
  • Implemented option to change background color of show value on the operator screen based on a trigger.
  • Implemented option to show dialog box with value of the 'show value' based on trigger.
  • Fixed archiving when backdated data for which no archive exists was incorrectly placed to the archive
  • Implemented Flat file protocol with support for TCP client connection to the TCP server.
  • Implemeneted OPC using .NET.
  • MDC protocols can run parallel on the same DNC port.
  • Fixed incorrect masking of bits in the NETLink
  • Fixed focas reading uint from PMC.
  • Added 'TEXT' description of the message when message is generated by an input field from operator screen.
  • Fixed memory leak in Siemens OCX.
  • Implemented parse trigger for save to env. variable for screen and for port on operator screens.
  • Fixed not properly loaded LIVE configuration after very first MDC start up.
  • CNC info can be used also with stand alone MDC server (exchanged by memory mapped file).
  • Fixed bug in Archiving when data was not deleted from monitorlog when daylight saving time is being changed.
  • Fixed character coding to UTF-8 when MDC report is exported to XML.
  • Rolling timeline now supports writing interval in seconds.
CIMCO NC-Base 8.07.00
  • Corrected error when creating Oracle database scheme.
  • Added option to 'Modify all' when selecting multiple programs and modifying the program information.
  • New feature: Clearance levels. This feature allows blocking access for User Groups to certain files based on a clearance level system.
  • Modifications to Users and User Groups in the database configuration are not applied until the interface is closed by hitting OK. This means that modifications can now be cancelled.
  • Added new columns to show File Type, Clearance Level and Version for items in the NC-Base Client Explorer.
  • Added the option to have the full program log show in the log view in the NC-Base Client Explorer when the main file of the program is selected, as opposed to just the log entries for the file. This makes the log when selecting the main file of a program identical to when selecting the program entry proper.
CIMCO Software 8.06.11 StableReleased: 30-09-19Register to download
Changes since previous version:
CIMCO MDC-Max 8.06.11
  • Web Client: Fixed corruption of shop floor view configuration.
CIMCO Software 8.06.10 StableReleased: 02-09-19
Changes since previous version:
CIMCO Edit 8.06.10
  • Transfer: Fixed first transfer was seen as failed.
CIMCO CNC-Calc 8.06.10
  • AdaptiveParameters now persist when changes are made to feedrates.
CIMCO MDC-Max 8.06.10
  • Web Client: Corrected header when showing multiple columns in live screens.
  • Web Client: Applied optimizations for large installations.
CIMCO Software 8.06.09 StableReleased: 19-07-19Register to download
Changes since previous version:
CIMCO MDC-Max 8.06.09
  • Fixed mdc server crash when using output functions.
  • FOCAS PMC variable value is now present in the message variable 1.
CIMCO Software 8.06.08 StableReleased: 02-07-19Register to download
Changes since previous version:
CIMCO Software 8.06.08
  • Updated database connection.
  • MSSQL: Corrected issue resulting in sql error 'HY000-connection busy' and stalling of system.
CIMCO Edit 8.06.08
  • Improved rotating G-code.
  • Fixed crash when closing multi-channel window.
  • Backplot: Fanuc Filter: Corrected G76 cycle.
  • Fixed crash when failing to connect to FTP server.
  • Corrected issue where quick access toolbar would reset.
  • Corrected 'Open containing folder' when right-clicking file tab.
  • Fixed infinite loop in the editor replace dialog when replacing with certain multiline entries.
CIMCO DNC-Max 8.06.08
  • DNC-Max will now run MDC-Max ports and protocol ports in Demo mode.
  • Serial protocol: added 'Restart port after the end of a transmit operation' to the list of translatable strings.
  • Normal uses can no longer enable disabled ports by doing port actions.
  • FTP Server: Clients trying to list content of sub-directories will not have their working directory moved to this.
  • Trying to bring up help on the treeview in server, client and port configuration will no longer crash the program.
CIMCO MDC-Max 8.06.08
  • MDC-Max engine can now run during demo trial.
CIMCO NC-Base 8.06.08
  • Added override for the setting 'Import queue programs read-only' such that it never prevents admins from editing files.
CIMCO Software 8.06.07 PreviewReleased: 06-06-19Register to download
Changes since previous version:
CIMCO Software 8.06.07
  • Fixed an issue activating 6- and 12month keys.
CIMCO Edit 8.06.07
  • Corrected issue where Toolpath Statistics would not open.
  • Backplot: Macro B corrected.
  • Backplot: G71 cycle corrected.
  • Backplot: Fixed crash when using more than 50 decimals.
  • Backplot: Improved use of variables.
  • Backplot: G02 now scales correctly.
  • Backplot: G68 conescutive calls corrected.
CIMCO MDC-Max 8.06.07
  • TEXTVAR: Added option to always update the TEXTVAR content, even if changing to same value or NONE.
CIMCO NC-Base 8.06.07
  • Fixed an issue where all status targets from status 'Updating' could get disallowed, stranding programs in status 'Updating'. Will now allow 'Ready' if nothing else is allowed.
  • Fixed an issue associating files from the Editor where they would be associated as 'Other' files rather than 'NC-Data'.
  • Fixed an issue where disallowing files outside NC-Base Directory would disable additional trigger 'Folder Name' when adding new programs.
CIMCO Software Manager 8.06.07
  • Software Manager can now start the License Server on a license key with special characters in it's name.
CIMCO Software 8.06.06 PreviewReleased: 06-05-19Register to download
Changes since previous version:
CIMCO Edit 8.06.06
  • NC Convert: Added 'Selection only' option.
  • 'Result to new window' option has been added to the 'Replace' function in CIMCO Edit. With this option checked, the result of the 'Replace' and 'Replace All' operations gets displayed in a new tab.
  • Fixed an issue which caused the Editor to crash in some rare cases when saving a file.
  • Added config option to suppress the NC-Assistant.
CIMCO DNC-Max 8.06.06
  • Network Protocol: Fixed issue when trying to execute external program when received file was larger than 16 Kb.
CIMCO MDC-Max 8.06.06
  • Fixed conflict with same names of the cache folders when multiple MDC client instances are running.
  • Implemented an option to overwrite already existing excel file when exporting to excel.
  • Fixed issue with report interval map when 1st shift crosses a midnight - added a checkbox to select whether the 1st shift starts previous day.
  • Increased the number of events in MDC-Max to 1000 from 100.
  • Web Client: Added operator list button function.
CIMCO NC-Base 8.06.06
  • Logoff of NC-Base should no longer close non-ncbase file tabs.
  • NC-Base client now has a new configuration option, 'Force NC-Base login', that grays out the cancel button in the login dialog and does not let a user use the program without logging onto NC-Base first.
CIMCO Software 8.06.05 PreviewReleased: 10-04-19Register to download
Changes since previous version:
CIMCO DNC-Max 8.06.05
  • Fixed crash of service manager when using license server.
CIMCO Software 8.06.04 PreviewReleased: 08-04-19
Changes since previous version:
CIMCO Edit 8.06.04
  • Backplot fullscreen now opens up on the correct monitor on a multi-monitor setup.
  • Removed auto-save of files when printing.
  • Mazatrol Viewer: Files can no longer be saved as .mzk.
CIMCO DNC-Max 8.06.04
  • Fixed an issue with saving debug logs in DNC-Max Admin.
  • DNC-Max Client will no longer grab an NC-Base Client license from License Server when launching DNC-Max Server configuration.
CIMCO MDC-Max 8.06.04
  • Fixed bug in 'Crop' function for RT DB tables job/program/operator.
  • MDC server uses now its own MDCMaxSrv.ini as a configuration file.
  • Implemented SSL/TLS for email client built-in in MDCMaxCMD.exe.
  • Fixed memory leak in Sinumerik PL adapter protocol.
  • Fixed wrong labels in the MTConnect variables dialog.
  • Fixed the mangled variables texts in the MTConnect variables tab
  • Fixed grey being unselectable in button configuration for operator screens.
  • FOCAS: Fixed disappearing macro definitions.
  • Dashboard: Added new widget type - Value.
  • Added 3 new TIME expressions, NOWDAYNUMBER, DAYSTARTNUMBER, and DAYENDNUMBER. These can be used to get the current day number where 1 is Monday and 7 is Sunday.
CIMCO Software 8.06.03 PreviewReleased: 18-03-19Register to download
Changes since previous version:
CIMCO Edit 8.06.03
  • Closing all other tabs now only affects file tabs
  • Fixed an issue when closing tabs using middle mouse button or the right-click popup menu.
  • Fixed printing unsaved file and selection.
  • Increased reload time when editing nc files during backplotting to 500 ms.
CIMCO DNC-Max 8.06.03
  • Improvements to file info caching in DNC-Max, improving directory synchronization stability with large amounts of files.
  • Consistency improvements to Directory Synchronizer when synchronizing large file structures.
  • FTP one-way synchronization now supports filtering and renaming using advanced triggers.
  • FTP synchronization no longer resets status when the port restarts, limiting unnecessary re-transfers.
  • General improvements to consistency and performance of FTP synchronization when dealing with large file structures.
  • Handling some special cases and rare errors with FTP on FANUC machines.
  • FTP Server: Added new behavior Brother. CWD commands now give the expected output when disabling directory change is checked.
  • DNCMaxCtrl now takes an additional parameter, '-gd', that makes it attempt to delete the filename specified on CNC side.
  • Barcode Scanner: Fixed issue where data was not being redirected to port if no MDC tag was defined.
  • Fixed unexpected limitation of email groups.
  • FOCAS protocol now supports cleaning CNC target directory when sending files.
CIMCO MDC-Max 8.06.03
  • PC Client: Fixes wrong indicator size on certain configurations
  • Timeline report now zooms to mouse location on mouse-scroll
  • MDC-Max server creates now firewall rules automatically.
  • Fixed issue with MDC ports running 'Calculating' in loop.
  • Fixed the bug where moving the last entry in indicator/lights seemed to empty the values after move.
  • Improvements to avoid crash of Heidenhain COM protocol.
  • Added modbus tcp protocol
  • Timeline labels are now less random and more useful
  • Web Client: Status Screens now support showing multiple columns on one screen.
  • Fixed wrong indicator size on certain configurations.
CIMCO NC-Base 8.06.03
  • Only users with Delete OR UnDelete permissions can find deleted programs now.
  • User with no machines assigned no longer has access to all machines.
  • Backup and Restore scripts updated.
  • Fixed issue where print permissions would be ignored.
CIMCO Software 8.06.02 PreviewReleased: 06-02-19Register to download
Changes since previous version:
CIMCO Software 8.06.02
  • Updated Portuduese translation.
  • Updated French translation.
CIMCO Edit 8.06.02
  • Added option in config for CIMCO Edit to use temp files for macros in case multiple editors access the same macro files.
  • Fixed the bug where the context menu would not appear when right-clicking on Backplot window in multi monitor configuration with the 'main' display being to the right of other displays and the Backplot window being in the 'main' display.
  • Fanuc Filter: Minor bug fixes for Fanuc.
  • Okuma Filter: Formula translator and V-variables support for Okuma.
  • Fixed print column setting being ignored when printing.
  • Fixed the bug where the users would not be able to print files from Editor with disabled NC-Base.
  • During upgrade of installation, Configpaths.cfg will be correctly changed to user choice.
CIMCO DNC-Max 8.06.02
  • Handheld Terminal: Incoming data is no longer falsely identified as MDC event if any of the defined MDC start tag characters is contained in the first incoming data character.
  • DNC-Max client auto update feature updated to use new language file names.
CIMCO MDC-Max 8.06.02
  • Fixed address reading of 3 digits data blocks. Optimized restarting of the NETLink protocol.
  • Heidenhain protocol: Added option to [OPTION18] -> DCOMINPROCESS = Yes to run the Heidenhain DCM in process.
  • Heidenhain protocol: Added nc version check and list of supported NC versions.
  • Heidenhain protocol: Added error descriptions for DNC errors.
  • Fixed issue with randomly missing values on a job dialog when DB query is used.
  • Fixed issue when a message was generated even if a job dialog was closed by cancel button.
  • Updated Sinumerik PL adapter - added a new OPC tag '/Cimco/ocxVersion' which return a current verion of the adapter.
  • Improved sync of MDC messages between DNC-Max server and MDC-Max client.
  • Web Client: Shopfloor views now support flashing state and indicators.
  • MDC-Max client language configuration selection no longer defaults to first language in list.
CIMCO NC-Base 8.06.02
  • Fixed a bug where backup file references were not properly updated when migrating base directory directly using the NC-Base Client.
  • Added option to keep subfolder structure when using nc-base converter. If this is not enabled then files in subfolders are added as if they were in the root of the data path.
  • It is now possible to include custom header when printing a file. The contents of the header can be either defined directly in the textbox in the Printing settings, or in a text file, or in both.
CIMCO License Server 8.06.02
  • Fixed an issue where group policies could prevent the License Server from using the Rijndael AES algorithm causing the License Server to crash.
CIMCO Software Manager 8.06.02
  • Added tooltips for controls in Software Manager
CIMCO Software 8.06.01 PreviewReleased: 14-01-19Register to download
Changes since previous version:
CIMCO DNC-Max 8.06.01
  • Fixed issue with MSSQL and ORACLE DB when a new DNC port was not added into DB.
  • Fixed an issue where DNC-Max Client Config would sometimes open without a tab visible.
  • Fixed issue where SENDROOT directory name was not displayed correctly.
  • Fixed issue where the mouse back button could incorrectly trigger a directory change when using SENDROOT.
  • DNC-Max Server will no longer grab a DNC-Max Client license when OK'ing configuration with MDC-Max enabled.
  • Fixed help link to bundled teamviewer client.
CIMCO NC-Base 8.06.01
  • It is now possible to print 9 additional headers when printing an NC file: file path, file size, created by, locked, version, status, read-only, created and transfer-limit.
  • Added permission setting for printing
CIMCO Software 8.06.00 PreviewReleased: 02-01-19Register to download
Changes since previous version:
CIMCO Edit 8.06.00
  • Collapsed ribbon groups now have appropriate icons.
CIMCO DNC-Max 8.06.00
  • Client: Added an option to customize the default tab showed in the DNC-Max Client on startup.
CIMCO MDC-Max 8.06.00
  • Web Client: Will now use unified client license. MDC Web client licenses will still be used in license keys created using this field.
CIMCO Software Manager 8.06.00
  • The 'Search' button is disabled and the corresponding label is being displayed while the AD is being scanned.
CIMCO Software 8.05.10 StableReleased: 08-04-19Register to download
Changes since previous version:
CIMCO Edit 8.05.10
  • Removed auto-save of files when printing.
  • Mazatrol Viewer: Files can no longer be saved as .mzk.
CIMCO DNC-Max 8.05.10
  • Fixed an issue with saving debug logs in DNC-Max Admin.
  • DNC-Max Client will no longer grab an NC-Base Client license from License Server when launching DNC-Max Server configuration.
CIMCO Software 8.05.09 StableReleased: 18-03-19Register to download
Changes since previous version:
CIMCO Edit 8.05.09
  • Closing all other tabs now only affects file tabs
  • Fixed an issue when closing tabs using middle mouse button or the right-click popup menu.
  • Fixed printing unsaved file and selection.
  • Increased reload time when editing nc files during backplotting to 500 ms.
CIMCO Software 8.05.08 StableReleased: 13-02-19Register to download
Changes since previous version:
CIMCO Software 8.05.08
  • Fixed reocognition of Portuguese language in selector controls.
CIMCO Software 8.05.07 StableReleased: 07-02-19Register to download
Changes since previous version:
CIMCO Edit 8.05.07
  • Fixed print column setting being ignored when printing.
CIMCO Software 8.05.06 StableReleased: 06-02-19Register to download
Changes since previous version:
CIMCO Edit 8.05.06
  • During upgrade of installation, Configpaths.cfg will be correctly changed to user choice.
CIMCO DNC-Max 8.05.06
  • Handheld Terminal: Incoming data is no longer falsely identified as MDC event if any of the defined MDC start tag characters is contained in the first incoming data character.
  • DNC-Max client auto update feature updated to use new language file names.
CIMCO MDC-Max 8.05.06
  • MDC-Max client language configuration selection no longer defaults to first language in list.
CIMCO NC-Base 8.05.06
  • Fixed a bug where backup file references were not properly updated when migrating base directory directly using the NC-Base Client.
CIMCO License Server 8.05.06
  • Fixed an issue where group policies could prevent the License Server from using the Rijndael AES algorithm causing the License Server to crash.
CIMCO Software 8.05.05 StableReleased: 10-01-19Register to download
Changes since previous version:
CIMCO DNC-Max 8.05.05
  • Fixed issue with MSSQL and ORACLE DB when a new DNC port was not added into DB.
  • Fixed an issue where DNC-Max Client Config would sometimes open without a tab visible.
  • Fixed issue where SENDROOT directory name was not displayed correctly.
  • Fixed issue where the mouse back button could incorrectly trigger a directory change when using SENDROOT.
  • DNC-Max Server will no longer grab a DNC-Max Client license when OK'ing configuration with MDC-Max enabled.
  • Fixed help link to bundled teamviewer client.
CIMCO Software 8.05.04 PreviewReleased: 03-01-19Register to download
Changes since previous version:
CIMCO DNC-Max 8.05.04
  • Web Client: Corrected issue where DNC web server would not start.
CIMCO Software 8.05.03 PreviewReleased: 21-12-18Register to download
Changes since previous version:
CIMCO Edit 8.05.03
  • Backplot: Fixed issue with machine state orientation for 4-axis machine setups.
CIMCO DNC-Max 8.05.03
  • Fixed web server not starting if defining username but no password for DNC web client login.
  • DNCMaxCtrl: Added option to wait for command finish -wff.
CIMCO Software 8.05.02 PreviewReleased: 17-12-18Register to download
Changes since previous version:
CIMCO Software 8.05.02
  • Added detection of issue with missing redistributables.
CIMCO Edit 8.05.02
  • Clicking the cancel button in setup macro does no longer save changes.
  • CIMCO Edit now supports specifying backup extension in the General tab.
  • Added new Address Adjustement tool to NC-Functions. This allow user to easily replace, remove or swap addresses
  • Advanced Open: You can click on 'Export results' to export the contents to a file
CIMCO CNC-Calc 8.05.02
  • Tab color indicator now also works for CNC-Calc tabs.
  • Corrected missing icons for layer management buttons.
CIMCO DNC-Max 8.05.02
  • Bar-code message can trigger an MDC message + a remote request in the same time.
  • DNC-Max web client has been updated with new and improved visual interface and additional features
  • NC-base data/other filetypes added as print option for remote request
CIMCO MDC-Max 8.05.02
  • Added option to check file name duplicity and keep original as well as the newly exported file by ExtenIO - XML/FLAT module.
CIMCO NC-Base 8.05.02
  • Fixed issue with rejecting files from import queue when they still remain in DB after that.
  • Fixed issue with multiple same programs on import queue.
CIMCO Software Manager 8.05.02
  • Fixed a crash stemming from network hangs while sending data to clients.
CIMCO Software 8.05.01 PreviewReleased: 03-12-18Register to download
Changes since previous version:
CIMCO Edit 8.05.01
  • Fixed Mazak Viewer failed to install when updating an installation.
  • File Compare: +/- are treated as normal characters when not followed by digits
  • File Compare: Compare function now gives same results regardless of order of files.
  • User is no longer prompted to save file when creating a new tool list.
CIMCO DNC-Max 8.05.01
  • Auto Receive File translators are now applied to destination file only, not original received file.
CIMCO MDC-Max 8.05.01
  • Fixed broken live screens when live timeline is running.
  • Fixed calling Unsubscribe() before a final Disconnect() is called in Heidenhain DCOM protocol.
  • MT-Connect: Configuration should no longer overwrite old config and will instead default to 'Custom'.
CIMCO NC-Base 8.05.01
  • Converter tool: Fixed bug when using converting tool and importing elements already in db.
CIMCO Software 8.05.00 PreviewReleased: 27-11-18Register to download
Changes since previous version:
CIMCO Software 8.05.00
  • It is now possible to override the location where CIMCO's products save the information on licensing.
  • Fixed some dll loading issues when running the program on an UNC share.
  • Fixed an issue running services as an existing user with no entry on the AD Controller.
CIMCO Edit 8.05.00
  • Can now show statistics and simulation correctly when path or file contains special characters.
  • Added option to backup and restore settings.
  • Added new backplot filter: Röders New
  • When choosing 'replace all in selection' no longer ignores the last row of selected text.
  • HAAS Turning is now correcly simulated as turning by default.
  • Added command line switch '/multichannel' to open file(s) in multi channel view mode.
  • It is now possible to bookmark all of the found strings at once in the Search function.
  • 'Clear All' button added to the Bookmarks window.
  • It is now possible to perform a multi-file text replacement from 'Replace' window.
  • Now highlights the entire line rather than only up to windowwidth.
  • It is now possible to use regular expressions in the Replace dialog.
  • Names should no longer be truncated in DNCMaxAdmin CIMCO Edit dock
  • Fixed a bug where the Find dialog did not find all of the matching substrings within a line when using search by regular expressions.
  • Improvements to printing of Mazak Smooth turning.
  • Fixed a number of small errors in printing Mazak files.
CIMCO CNC-Calc 8.05.00
  • In pocket milling 'Use even Depth Cuts' now work correctly when it is deselected.
  • In the menu 'Circle Tangent Through Point' now become grayed out when selected.
  • New Post Processor where it is possible to change the axis names in the global definition.
CIMCO DNC-Max 8.05.00
  • FOCAS Protocol: File transfers to data server will no longer fail if internal storage has insufficient free space.
  • DNCMaxCtrl now takes another parameter, '-f ', which lets you specify the sub-directory to send files to.
  • Fixed the Protocol config dialog from throwing an error when creating a Mazak protocol port
  • Removed additional 'tmp' folder in Netwok monitor protocol when an error report file is generated and Mapping sub-directories is enabled.
  • Fixed an issue where auto-import could hang.
  • Fixed an issue in monitoring network shares with read-only permissions.
CIMCO MDC-Max 8.05.00
  • Updated MDC subsystem.
  • Added option to enable/disable archiving feature - all data will remain in the monitorlog but central cache and rebuild process are still active.
  • Updated ExternIO.
  • Added mapping of operator Real Names from ncbase on a user serial number or a user comment.
  • Added a new button function on operator screens when values from all selected input fields are sent by once in a single message in MSGVAR2 separated by a comma.
  • Implemented an option when reports can be calculated by an external process CreateTable.exe to eliminate high memory usage of the MDC client with support for parallel run of multiple reports in the same time Tables&Charts configuration file [GENERAL] -> REPORTENGINE = INPROCESS | INTHREAD.
  • Fixed issue in MDC evaluator when condition was longer then 1000 characters and contained a constant value.
  • Added option to process job information in background even if a job information is not displayed in reports.
  • Added option to open PDF/HTML/Excel report as file location/in MDC client/open file in default application.
  • Generated reports do not block UI anymore.
  • Added option to ignore breaks and schedule for each individual report.
  • Fixed incorrect counter value in reports when 'Set' condition is used.
  • Added 'Rolling Timeline' report.
  • Added option Process JOB/PROGRAM/OPERATOR information in background when a report is being generated.
  • Added option to Suspend Timers and/or Counters during breaks for each individual built-in OEE in reports.
  • Fixed incorrectly calculated report when an another then default schedule was used.
  • Added new Timer expression TIMERTOTAL. This evaluates to the total run time of the timer since system start. This value is never cleared or reset.
  • Updated MDCMax\Sys\Update.ini
  • Renamed button caption Cancel Close -> Cancel.
  • Fixed a grayed out button Save All.
  • Fixes broken icons in menu bar
  • Fixes being unable to save the text-CFG files
  • Web Client: Fixed'Claiming License' state when using License Server.
  • TEXTVARS are now evaluated when generating reports from the MDC-Max client.
  • Added full HTTP header into HAAS MNET request.
  • Added 'Active Average' behavior to dashboard widgets. This only averages non-zero values.
CIMCO NC-Base 8.05.00
  • Implemented option select a manually received file from a drop down list in case that multiple file extensions are defined for a new program in the NC-Base setup.
  • It is now possible to print files and documents from the NC-Base view, without needing to open the file.
  • MariaDB instance can now be hosted on non-standard MySQL port.
CIMCO Software Manager 8.05.00
  • Fixed a crash when installing keyfiles.
  • Removed some non-translated languages.
  • The interface of Software Manager now includes overview of License Server usage.
CIMCO Software 8.04.04 PreviewReleased: 05-10-18Register to download
Changes since previous version:
CIMCO Software 8.04.04
  • Significantly improved performance of AD integration.
CIMCO Edit 8.04.04
  • Fixed an issue where navigating to bookmark using double-click would select the text between the bookmark and the curser in the edit window after navigating to bookmark
CIMCO MDC-Max 8.04.04
  • Improved stability of the MDC subsystem on some multicore CPUs.
CIMCO Software Manager 8.04.04
  • When the Software Manager fails to install keyfile, it should now give an explanation as to why.
CIMCO Software 8.04.03 PreviewReleased: 25-09-18
Changes since previous version:
CIMCO Software 8.04.03
  • Updated Korean translations.
CIMCO Edit 8.04.03
  • CIMCO Edit update dialog now asks a yes/no question and only updates if 'Yes' is pressed
  • Tabs can now be organized in CIMCO Edit.
  • Added close button to each individual Tabs.
  • Fixed a bug where DNC-Max client docked toolbar buttons are grayed out when pinned.
  • Corrected issue where Macros would not be loaded on startup.
  • Fixed Tool and Solid menu not showing in backplot tab.
CIMCO CNC-Calc 8.04.03
  • Fixed possible crash when creating new drawing.
  • Changes to the thread milling. External thread tested for too large tool.
  • Error with modality corrected in Haas Post Processor.
CIMCO DNC-Max 8.04.03
  • DNC-Max now backs up the port configuration when deleting ports.
  • Fixed a missing space between program and parameter when running .bat files in remote request.
  • Corrected SMS modems returning false error when sending SMS.
  • Fixed an issue where using the Associated filename trigger in standard serial port auto receive would make it ignore path settings.
CIMCO MDC-Max 8.04.03
  • Added a new 'Save' button to MDC-Max client.
  • MTConnect: Dialogs redone
  • It is now possible to export and import user groups in User Setup in MDC-Max.
  • Heidenhain DCOM can now read PLC markers, bytes, and words.
  • Heidenhain OCX3 can now read PLC markers and words
  • MDC protocol variables: Added operand functionality to Changed behavior. Only when value read has changed by since last reported will a new message be generated. A timeout for this can be configured in ms to ensure changes are sent even if changed by operand is not met.
CIMCO NC-Base 8.04.03
  • NCBase now properly shows program project in program info dialog.
CIMCO Software 8.04.02 PreviewReleased: 05-09-18
Changes since previous version:
CIMCO Edit 8.04.02
  • Corrected issue when detecting configuration from previous CIMCO Edit installations.
  • Corrected issue when selection a file type from drop-down menu.
  • CIMCO Edit no longer crashes when a file is compared with itself.
  • CIMCO Edit now saves maximize status as well as allowing the window to be placed on other monitors besides the primary one on launch.
CIMCO DNC-Max 8.04.02
  • SMS modem now recovers better from modem errors.
  • Right-clicking edit fields now show correct list of ASCII chars.
CIMCO MDC-Max 8.04.02
  • Web Client: MDC Web client now correctly detects if user is admin.
  • Implemented a new OPC protocol for Sinumerik 840D based on Windows XP which uses a middleware 'Siemens OCX Server' installed in a controller
CIMCO NC-Base 8.04.02
  • Corrected SQL statement when doing advanced search resulting in unwanted files showing in result list.
  • Corrected access to updating file from program information and updating program information from file when user does not have correct permissions
CIMCO Software 8.04.01 PreviewReleased: 10-08-18
Changes since previous version:
CIMCO Software 8.04.01
  • Corrected license issue when running as a non-domain account.
CIMCO Software 8.04.00 PreviewReleased: 09-08-18
Changes since previous version:
CIMCO Edit 8.04.00
  • Duplicate bookmarks are now removed from the Wins.bookmarks container and 'View Bookmarks' window when a merge of 2+ bookmarks occurs
  • Added a md5 hash of file in order to check if it is in the saved state when redo or undo is called
  • Fixed crash when trying to insert a macro in an unedited file
  • Updated the 'open file' dialog on non windows XP machines
  • It is now possible to use /readonly switch to open files in read-only mode from command-line.
  • Added option 'Open all files as read-only' to CIMCO Edit.
  • Untranslated strings in FTP Split-window made translatable
  • When using 're-open files' options, CNC-Calc drawings are also re-opened
CIMCO CNC-Calc 8.04.00
  • Fixes an issue where the mouse cursor flickers between default cursor and the currently set cursor.
CIMCO DNC-Max 8.04.00
  • Handled an error in FTP Server Protocol to prevent it from causing an application crash.
  • Updated FTP Server port directory listing in Default behavior to fall back to defined root dir if no CWD command has been issued by the client before the listing.
  • Added new options to the telnet interface: File transfer to/from specific folder on a FOCAS control using new optional parameter TARGETFOLDER. Added option to dump directory listing to a specific file using a new operation, DIRLIST.
  • Auto Import: Other file extensions is now active by default.
  • Fixed duplicate extension on DNCMaxCtrl config file
  • he MOXA drivers will now attempt a restart of the unit through telnet if the connection to the unit fails. This should fix a certain error state where the MOXA drivers go into a busy-wait for a reply which never comes.
  • Added GUI elements to configure username and password for MOXA units to allow restarts through telnet on devices with logins.
  • DNC-Max server interface now shows active network adapter
  • Improved support for Heidenhain TNC640, TNC620 and TNC320
  • Split-window now remembers last posistion and size and can no longer spawn outside of screens
  • Added option to clean the directory on the control of all files and folders when file is sent, including remote requests and barcode scans.
  • When using Remote-Request for Network Protocol ports (FTP, FOCAS, LSV2...) file is send using active network protocol
CIMCO MDC-Max 8.04.00
  • Engine: It is now possible to specify the number of threads that calculate the real-time data for MDC ports. Default is number of CPU cores - 1. MDC ports are automatically distributed on the threads. Number of threads can be changed in DNC-Max server dialog for MDC.
  • Added search filter to MDC expression designer
  • No longer see every change in DNC-Max server configuration as changing the message tag list resulting in MDC-Max Engine restart.
  • Added two new options to reduce network usage in the MTConnect protocol config.
  • Fixed crash when trying to use 'Custom Colors'
  • Fixed spindle override lookup in the NETLink protocol.
  • Memory optimization in the OPC protocol.
CIMCO NC-Base 8.04.00
  • Users can now select whether they want machine group field to be cleared on 'Clear' or not.
  • Fixed crash when switching to log view from a PNG file.
CIMCO License Server 8.04.00
  • Updated and improved integration with Active Directory.
CIMCO Software 8.03.03 PreviewReleased: 17-07-18Register to download
Changes since previous version:
CIMCO Edit 8.03.03
  • Dirty file indicator '*' is now removed if all actions are undone.
  • Mazak Viewer: Solved Mazak Viewer crashing due to specific cutting conditions.
  • Maximum tab width is now larger for FileCompare tabs.
  • Added synchronized scrolling to CIMCO Edit when shift is pushed down.
CIMCO CNC-Calc 8.03.03
  • New parameters to control direction of finish passes added to Turning finish and roughing.
  • The direction of the finish tool path can now be selected from inside out or outside to in.
CIMCO DNC-Max 8.03.03
  • Transfer using FOCAS protocol now updates progress bar.
  • Updated listed ports to reflect new ports used.
  • Added portname next to the title of the select file window.
CIMCO MDC-Max 8.03.03
  • Timelines now work with schedules which don't cover full 24hrs per day.
  • Timelines can now show indicators of shift changes.
  • Web Client: Add url parameter for ?username=myusername&password=mypassword to make faster auto login.
  • Web Client: Fix bug where the pie chart widget fails to render in IE.
  • Web Client: Allow shop floors in slideshow.
  • Web Client: Make slideshow able to show with just one screen.
CIMCO NC-Base 8.03.03
  • Fixed trying to delete file in NCBase when clicking ctrl + alt + delete.
  • Machine drop-down no longer resets when clearing search fields.
CIMCO Software 8.03.02 StableReleased: 13-06-18Register to download
Changes since previous version:
CIMCO Edit 8.03.02
  • Siemens Filter: Finishing mode of the CYCLE95 is improved.
CIMCO DNC-Max 8.03.02
  • Fixed issue with limit of email user groups when emails were not sent to all user groups.
  • Optimized RAM usage.
CIMCO MDC-Max 8.03.02
  • Fixed spindle override reading in the NETLink protocol.
  • Fixed legacy connector (4448) in the MDC client.
  • Implemented a new protocol for Mitsubishi EDM machines.
  • Added a safety check for LIVE engine to ignore events with higher time stamp then NOW.
  • Web Client: Fix bug where slideshow was broken.
CIMCO License Server 8.03.02
  • Fixed an issue where early timeout from clients on very slow connections could put the License Server in a state where it stopped accepting client connections.
  • Fixed a rare issue where severe network conditions could cause the License Server to stop accepting clients.
CIMCO Software 8.03.00 PreviewReleased: 09-05-18Register to download
Changes since previous version:
CIMCO Edit 8.03.00
  • Fallbacks for saving routine which should allow the Editor to save on Okuma control shares.
CIMCO CNC-Calc 8.03.00
  • Measure corrected so it is now easier to set measurements as horizontal and vertical.
  • Fagor 8055i Microcut post processor added to the distributed posts.
  • Fadal Post Processor added to CNC-Calc.
  • Line parallel and Perpendicular corrected so the line default line length is made positive.
  • Bugs corrected in Roughing and Finish Turning.
  • Bugs corrected for ramp in milling.
  • Corrected bug where we were unable to read letters in drawings.
  • Bug corrected in Turning Roughing and Finish.
CIMCO MDC-Max 8.03.00
  • Web Client: Added shop floor view to web client. It is now possible to import drawings in SVG file format and map live screens to these maps. Shopfloor are created through the web client for users with Admin or Edit Live Screen privilegdes
  • Web Client: MDC screen permissions are now enforced in the web client, controlling access to Operator screens, live screens and shopfloor views.
  • Web Client: Optimize screen / machine updates to be less CPU intensive.
  • Added a new button function on operator screens 'Reading JOB data from DB using SQL query'.
  • Added a new option to close sub-screen when input field is submitted.
  • Added PARAM2=1 in out cfg to disable feature (PARAM2=0) when 'yesterday' means previous working day.
  • Added a new parameter in MDC client cfg file in section [SYSTEM] FULLSCREENTOPMOST = No|Yes.
  • Added a new parameter in out cfg DEBUGINTERVALMAP = Yes|No, that generates an interval map in MDCMax\Sys\intervalmap.txt which is used for the generated report.
  • Implemented a new ExternIO type 'XMLFILE' for exporting data to xml and importing data from xml file.
  • Improved archiving mechanism for MSSQL versions older than 2012.
  • Increased number of counters to 224.
  • Fixed issue with reports when work week starts on Sunday at 22:00.
  • Fixed bug with Re-fetch on MySQL introduced in V8.02.26.
  • Fixed bug when monthly report was generated as a daily report introduced in V8.02.26.
  • Fixed issue with timeline when during closing of a timeline MDC client could crash.
  • Fixed a special case when a report is generated during last shift but on a new day (especially when is starts on Sunday or on Monday) and current time is still in during last Sunday shift.
  • Fixed export of weekly timeline to pie charts when schedule is not defined for all week days (e.g.: Mo-Fri).
  • Added support for user/password authentication to the OPC UA protocol. Added CNC INFO to the OPC protocol.
  • Added parameters to the NETLink protocol for the custom override values.
  • Added PINGTIME parameter into IO Device setup dialog in the DNC Server Config. Default value of PINGTIME was changed to 0.
CIMCO NC-Base 8.03.00
  • Fixed time-zone issue when nc programs have wrong time stamp when MSSQL is used. Local time is used instead of the database time.
CIMCO Software 8.02.29 StableReleased: 25-05-18Register to download
Changes since previous version:
CIMCO MDC-Max 8.02.29
  • Added a new button function on operator screens 'Reading JOB data from DB using SQL query'.
  • Added a new option to close sub-screen when input field is submitted.
  • Added PARAM2=1 in out cfg to disable feature (PARAM2=0) when 'yesterday' means previous working day.
  • Added a new parameter in MDC client cfg file in section [SYSTEM] FULLSCREENTOPMOST = No|Yes.
  • Added a new parameter in out cfg DEBUGINTERVALMAP = Yes|No, that generates an interval map in MDCMax\Sys\intervalmap.txt which is used for the generated report.
  • Implemented a new ExternIO type 'XMLFILE' for exporting data to xml and importing data from xml file.
  • Improved archiving mechanism for MSSQL versions older than 2012.
  • Increased number of counters to 224.
  • Fixed issue with reports when work week starts on Sunday at 22:00.
  • Fixed bug with Re-fetch on MySQL introduced in V8.02.26.
  • Fixed bug when monthly report was generated as a daily report introduced in V8.02.26.
  • Fixed issue with timeline when during closing of a timeline MDC client could crash.
  • Fixed a special case when a report is generated during last shift but on a new day (especially when is starts on Sunday or on Monday) and current time is still in during last Sunday shift.
  • Fixed export of weekly timeline to pie charts when schedule is not defined for all week days (e.g.: Mo-Fri).
  • Added support for user/password authentication to the OPC UA protocol. Added CNC INFO to the OPC protocol.
  • Added parameters to the NETLink protocol for the custom override values.
  • Added PINGTIME parameter into IO Device setup dialog in the DNC Server Config. Default value of PINGTIME was changed to 0.
CIMCO NC-Base 8.02.29
  • Fixed time-zone issue when nc programs have wrong time stamp when MSSQL is used. Local time is used instead of the database time.
CIMCO Software 8.02.28 PreviewReleased: 30-04-18
Changes since previous version:
CIMCO Software 8.02.28
  • Fixed parts of the localization systems to properly display special characters.
CIMCO NC-Base 8.02.28
  • Vaults dirup button now work with UNC paths.
  • Fixed an issue preventing some valid vault moves.
  • Fixed a number of issues to do with using the same vault for multiple programs.
  • Fixed an issue exploring to vaults when external Editors were disabled.
  • Added some help text to vaults configuration.
  • Fixed an issue with missing sub-menus in the right-click menu in NC-Base Client.
  • Fixed backups and restores using vaults.
  • Fixed an issue where using cached NC-Base Server settings in the NC-Base Client could cause issues when the Database Server version was incremented.
CIMCO License Server 8.02.28
  • Fixed an issue preventing License Server V8 from working under XP.
CIMCO Software 8.02.27 PreviewReleased: 12-04-18
Changes since previous version:
CIMCO Edit 8.02.27
  • Heidenhain Filter: Improved arc type detection
CIMCO MDC-Max 8.02.27
  • Web Client: Optimize machine data handling for supporting larger configurations.
  • Web Client: Fix bug where ascii skipping was not handled properly.
  • Web Client: Remove support for mdc-encoding.txt file in favor of mdcweb.json file with 'compression' field.
CIMCO Software 8.02.26 PreviewReleased: 04-04-18
Changes since previous version:
CIMCO Edit 8.02.26
  • Updated German translations.
  • Fixed issue with empty tool number when simulating.
  • Filter: Corrected Heidenhain cycle 256
  • NC-Assistant parameter fields can now be collapsed and expanded to provide better access to macro list.
CIMCO DNC-Max 8.02.26
  • SMS modem: Added new generic AT Command device mode. This replaces the GTM 203 specific device mode.
  • The Edit button in the file selector when sending files can now be disabled.
CIMCO MDC-Max 8.02.26
  • Added option to remove DNC ports from MDC port list which do not collect any data.
  • Implemented a new option for data archiving when data is not loaded into memory and kept only in a file.
  • Implemented option to select whether single-threaded or multithreaded rebuild is used.
  • Optimized memory usage - MDC threads got smaller stack.
  • Web Client: Stability improvements for big MDC installs.
CIMCO NC-Base 8.02.26
  • Introducing Data Vaults. These are folders linked to a program in the database for users to put items which pertain to the program but aren't relevant to the NC-code itself, or which just don't need to be revisioned or backed up under the NC-Base scope.The content of the vault is in no way monitored by the NC-Base, the vault is merely meant to be a way for large companies to have a centralized folder for volatile data pertaining to a program. The data vaults can be controlled using to limit viewing and managing rights to avoid confusion from people who don't need to see the data.
  • It is now possible to prevent users from using the 'Copy to' functionality of the NC-Base Client using the user rights settings.
CIMCO Software 8.02.25 PreviewReleased: 13-03-18Register to download
Changes since previous version:
CIMCO MDC-Max 8.02.25
  • DNC server and MDC client uses only local computer clock. It allows to run the DB Server on a different PC in a different time zone. DNC server and MDC clients require a same time zone.
  • Added a new type of report duration 'Hour' and start time option 'Last complete hour'. It generates an hourly report for last complete hour.
CIMCO Software 8.02.24 PreviewReleased: 09-03-18Register to download
Changes since previous version:
CIMCO Software 8.02.24
  • Updated German translations.
CIMCO CNC-Calc 8.02.24
  • New kernel that corrects the tool path for pocket milling.
  • Helix and thread milling corrected so that compensation is inserted at the right places.
  • Minor changes made in conjunction with translation.
  • DXF corrected for inserting multiple blocks with rotation and Clone is now corrected so it make a deep clone of the objects.
CIMCO DNC-Max 8.02.24
  • 'Ignore files smaller than X bytes' in auto receive will no longer ignore all files when using filename to extract program name.
  • DNC-Max will now allow NC-Base interaction if the license only contains MDM.
CIMCO MDC-Max 8.02.24
  • Fixed reading of execution status and program name when the program name doesnt start with Onumber. Fixed spindle override in the NETLink protocol.
  • Added a log file 'MDCMax\Sys\shopmon.log' for output from MDCMaxCMD.exe
CIMCO NC-Base 8.02.24
  • Fixed an issue where the question to associate new file to existing program would trigger for every program in the machinegroup if no program name was found in the new file.
  • ODBC API type will attemp to load any available dll including sqlsrv32.dll which is in Windows by default.
CIMCO License Server 8.02.24
  • Fixed an error in License Server handling of product release when using relay servers.
CIMCO Software 8.02.23 PreviewReleased: 16-02-18Register to download
Changes since previous version:
CIMCO NC-Base 8.02.23
  • Fixed a bug preventing NC-Base logging from requesting user comments.
CIMCO Software 8.02.22 PreviewReleased: 15-02-18Register to download
Changes since previous version:
CIMCO Edit 8.02.22
  • Improved stability of Toolpath Statistics
CIMCO CNC-Calc 8.02.22
  • Corrected bug where file could not be saved.
CIMCO DNC-Max 8.02.22
  • FTP Server: Default server behavior can now handle old Okuma LIST commands.
CIMCO MDC-Max 8.02.22
  • Fixed issue with timer values after single machine recalculation - backdating.
  • Fixed evaluating of the realtime DB tables on MDC message.
  • Fixed issue with MDC client when exporting timeline to pie charts.
CIMCO NC-Base 8.02.22
  • Fixed issue with database creation when MSSQL is used and api type is ODBC.
  • Added support for non-standard port when using MariaDB.
CIMCO License Server 8.02.22
  • License errors in the License Server will now give descriptive error messages rather than just numbers.
CIMCO Software 8.02.21 PreviewReleased: 06-02-18Register to download
Changes since previous version:
CIMCO Software 8.02.21
  • Update German localization.
CIMCO Edit 8.02.21
  • Fixed issue with installation without CNC-Calc.
CIMCO CNC-Calc 8.02.21
  • Parameter check corrected for finish and roughing turning.
  • Error in finish turning corrected.
CIMCO DNC-Max 8.02.21
  • Network protocol Auto receive: Fixed issue when trying to ignore specific files when auto receiving associated files.
CIMCO Software 8.02.20 PreviewReleased: 05-02-18
Changes since previous version:
CIMCO Software 8.02.20
  • Update german localization.
CIMCO Edit 8.02.20
  • Support nested variables in Fanuc/Haas filters.
CIMCO CNC-Calc 8.02.20
  • Added layers to CNC-Calc.
CIMCO MDC-Max 8.02.20
  • Added new MDC protocol for Haas NGC control
  • Added option into NETlink protocol to read integer values.
CIMCO Software 8.02.19 PreviewReleased: 26-01-18Register to download
Changes since previous version:
CIMCO DNC-Max 8.02.19
  • Update to Network I/O when reading counters.
  • Fixed problem when receiving files with lines longer than 4096 characters in Network Protocol
  • It is now possible to receive files from DNC-Max as associated files without receiving the main file at the same time, in Directory Monitor and Standard Serial Protocol.
CIMCO MDC-Max 8.02.19
  • Added option in LIVE screen configuration to enable/disable live screen name title in full screen.
  • Added option to limit max zooming of timeline to a given factor.
  • Added option to select if mouse wheel scrolls or zooms timeline.
  • Added check of the report configuration before DB View is activated.
  • Fixed autostart of live screens when also not allowed screens for logged in user were opened.
  • Fixed issue with loading Excel template (xlsx) when this template is opened in Excel in the same time.
  • Fixed incorrect formatting of integer in realtime DB tables.
  • Fixed incorrect character encoding when timeline is exported to pie charts.
  • Fixed issue with archiving when it could contain duplicated events.
  • Added consistency check of archive before is uploaded to DB.
  • Added option to hash TEXTVARs - used for text comparison in the MDC engine.
  • Fixed TEXTVARCHANGED[xxx].
  • Improved stability of the new compressed live protocol.
  • Improved evaluating of the DB tables.
CIMCO NC-Base 8.02.19
  • It is now possible to set up automatical extraction of filename, extension and folder from the content of the file when saving the file to the database. Filename and extension can be used in DNC-Max to handle reception of associated files such as sub-programs without receiving the main file at the same time.
  • When copying a program in the NC-Base, the directory structure of the program can now be conserved such that programs in sub-folders or with sub-folders for associated files will still be such after the copy. Folders will be renamed according to new program names.
CIMCO Software 8.02.18 PreviewReleased: 08-01-18Register to download
Changes since previous version:
CIMCO CNC-Calc 8.02.18
  • Fixes an issue where turning operations buttons are not activated until the drop-down menu is changed.
CIMCO MDC-Max 8.02.18
  • Fixed memory grow during rebuild.
  • Fixed evaluating of floats in real-time DB tables JOB/PROGRAM/OPERATOR.
CIMCO Software 8.02.17 PreviewReleased: 04-01-18Register to download
Changes since previous version:
CIMCO DNC-Max 8.02.17
  • Fix issue with serial protocal related to path extraction.
CIMCO Software 8.02.16 PreviewReleased: 02-01-18
Changes since previous version:
CIMCO DNC-Max 8.02.16
  • DNC-Max no longer grabs an MDC client license to start the MDC Engine.
  • Fixed an issue when using FOCAS2 to send to different directories than the default one.
  • Added option to keep directories auto received file are located in.
  • Exporting received files to NC-Base queue now respects 'use folder name as program' option.
CIMCO MDC-Max 8.02.16
  • Added a custom query before start of archiving process. Definition in MDC ENGINE configuration file [GENERAL] ARCHIVECUSTOMQUERY =.
CIMCO NC-Base 8.02.16
  • Associated files can now corectly be rejected from queue.
CIMCO License Server 8.02.16
  • Handled some rare error states in the License Server.
CIMCO Software 8.02.15 PreviewReleased: 20-12-17Register to download
Changes since previous version:
CIMCO Edit 8.02.15
  • Fagor Filter: Fixed hanging bug related to '/' character.
  • Heidenhain Filter: Support rotation PLANE VECTOR and PLANE POINTS rotations.
  • Move Select Servers to its own button on the ribbon. This makes it easier to find and select a DNC-Max Server when not running one locally.
  • Fix an issue where Send/Receive buttons were not activated/deactivated correctly in the DNC-Max Client ribbon tab.
CIMCO CNC-Calc 8.02.15
  • Bug with default values for custom fields corrected.
CIMCO DNC-Max 8.02.15
  • Fixed an issue where the protocol timeout for Directory Monitor Protocol would reset when loading the configuration window.
CIMCO MDC-Max 8.02.15
  • Added option in LIVE configuration file [GENERAL] LIVECOMPRESSION = Yes or No .
  • Dashboards removed from Operator Screen list.
  • Fixed issue with fullscreen mode when operator notofication is active and any Live screen is active.
  • Improved search filter for JCS SAP orders.
  • UI for JCS customized tools.
  • Fixed issue with reports when start date is YESTERDAY.
  • Fixed issue with reconnection of ExternIO MSSQL connector.
  • Update of Report selector dialog.
  • Fixed auto-start of timeline into a new day.
  • Updated 'update.ini'.
CIMCO NC-Base 8.02.15
  • MSSQL connector -> ODBC set as default API. Ini files section [NCBASEGLOBAL] -> DBAPITYPE = ODBC or OLEDB.
CIMCO Software 8.02.14 PreviewReleased: 01-12-17Register to download
Changes since previous version:
CIMCO Edit 8.02.14
  • Make the Select File For Each Channel dialog horizontally resizable.
  • Fixed an issue where tab text would overlap the file Icon when the file has a long filename.
CIMCO MDC-Max 8.02.14
  • Dashboards removed from Live Screen list.
  • Fixed issue with incorrectly displayed operator screens after MDC client startup.
CIMCO Software 8.02.13 PreviewReleased: 30-11-17Register to download
Changes since previous version:
CIMCO Software 8.02.13
  • Remove unused installer files.
  • Remove unused Uninstaller.
CIMCO Edit 8.02.13
  • Added CIMCO Edit icon to the Split window dialog.
  • Fix an issue with missing ToolList.txt files. NOTE: The ToolList.txt template file has been removed from the installer, and is now dynamically created in the DATA directory, and if a ToolList file already exists, then it is copied to the DATA directory.
CIMCO CNC-Calc 8.02.13
  • Fixed the linking page showing the wrong label saying Pocket and not Contour
CIMCO MDC-Max 8.02.13
  • Fixed issue with incorrectly updated DB tables.
  • Fixed issue with TEXT[MCHVARx] when the value is a number.
  • Added user input to predefined list (job files) in MDC-Max clients.
CIMCO Software 8.02.12 PreviewReleased: 21-11-17Register to download
Changes since previous version:
CIMCO Edit 8.02.12
  • Fix localization for Advanced Renumbering and NC Converter.
  • Re-enable Convert NC Code.
  • Multi Channel Sync and Program start commands styled in the Print output.
  • Fix localization issues in Advanced Open dialog.
  • Changed the layout of Advanced Renumbering dialog to follow CIMCO Edit dialog styles.
  • Remove dependency on elevate.exe.
CIMCO DNC-Max 8.02.12
  • The DNC service recovery action is set to 'Restart the Service' when the service is installed by DNC-Max Service Manager.
CIMCO MDC-Max 8.02.12
  • Fix incompatibility with older Android devices running Chrome.
  • Attempt auto login with 'admin' and empty password on launch if not logged in.
  • Fix bug where minutes were rounded up in HMS resulting in wrong numbers.
  • Implemented option for restrict access to operator sub-screens.
  • Fixed issue with machine list font size in multiple operator screen.
  • Fixed issue with background color in HTML reports in some cases.
  • Implemented status colors in the machine list for multiple operator screen.
  • Default value of the ALLOWMULTIPLE parameter for MDC client changed to true.
CIMCO NC-Base 8.02.12
  • Remove unused Help button in NC-Base Restore dialog.
  • Fix an issue where the 'Customer' setting under 'Required fields for sending' was not saved/restored correctly.
CIMCO Software 8.02.11 PreviewReleased: 15-11-17Register to download
Changes since previous version:
CIMCO Edit 8.02.11
  • Updated CNC-Calc.
CIMCO Software 8.02.10 PreviewReleased: 10-11-17Register to download
Changes since previous version:
CIMCO MDC-Max 8.02.10
  • Web Client: Fix bug where the web client in some cases reads machine data incorrectly from the DNC server.
CIMCO Software 8.02.09 PreviewReleased: 07-11-17Register to download
Changes since previous version:
CIMCO DNC-Max 8.02.09
  • Added GSM GTM-203 SMS modem support for 3G networks.
CIMCO MDC-Max 8.02.09
  • Web Client: Make caching layer of machine information to reduce bandwidth usage between web client server and DNC server.
  • Add message compression.
  • Fixed issue with corrupted DB table name in some cases.
  • Fixed issue with start of report when is generated today but still during last shift of previous day.
CIMCO License Server 8.02.09
  • Fixed an issue where the License Server could stop responding to clients under very specific network circumstances.
CIMCO Software 8.02.08 PreviewReleased: 03-11-17Register to download
Changes since previous version:
CIMCO Edit 8.02.08
  • Added support for printing documents from Multi Channel mode.
CIMCO License Server 8.02.08
  • Fixed another bug in reservations.
CIMCO Software 8.02.07 PreviewReleased: 27-10-17Register to download
Changes since previous version:
CIMCO CNC-Calc 8.02.07
  • Corrected bug for focus change when entering line lengths.
CIMCO DNC-Max 8.02.07
  • Fixed spindle override at Fanuc Focas protocol.
  • Extended reading of PMC variables about Data Table type.
CIMCO MDC-Max 8.02.07
  • Fixed an issue with messages from operator panels.
  • Added option in LIVE cfg file in section [GENERAL] -> ALLOWADLOGIN = True to disable AD login in MDC web interface.
CIMCO Software 8.02.05 PreviewReleased: 17-10-17
Changes since previous version:
CIMCO Edit 8.02.05
  • Made some missing strings in the ribbon localizable.
CIMCO MDC-Max 8.02.05
  • Implemented a new ExternIO modul for general data exchange between MDC and third party system like ERPs using WEB service and database.
  • Implemented TEXTVAR[xxx] with similar features like TEXT[JOB/PROGRAM]
  • Increased number of counters to 256.
  • Implemented 2 new OEMLink functions – one called before processing of ExternIO another called after.
  • Fixed issue with evaluating MSGVAR9-16.
  • Improved Operator screen when only one mfc dialog for multiple machines is used instead of one dialog per machine which leads to crash (run out of resources) when lots of machines should be displayed.
  • Fixed crash of MDC client when a button on operator screen is pushed and MDC client is not connected to the server.
  • Added new button function on operator screen to use custom SQL query to load data from local DB and result display in job list dialog.
  • Reloading of MDC configuration is done now by main application thread instead of connector thread which led sometimes to crash of MDC client.
  • When MDC client crash happens the application is immediately started again and dump log is stored in folder MDCMax8 in the same way like DNC server does.
  • Added new option for “Show value” on operator screen when a single click will open message box with same text like in 'show value' used when message doesn’t fit the 'show value' field.
  • Added support for service name in ORACLE connector.
CIMCO Software 8.02.04 PreviewReleased: 12-10-17Register to download
Changes since previous version:
CIMCO Edit 8.02.04
  • Heidenhain filter: Fixes rare case of infinite looping.
  • Siemens filter: Siemens makes interpretation process more stable in case of incorrect usage of Fanuc syntax in a Siemens program.
CIMCO DNC-Max 8.02.04
  • FOCAS 1 file transfer fix.
CIMCO MDC-Max 8.02.04
  • Web Client: Fixed memory issue with DNC-Max server when using MDC-Max web client.
  • Web Client: Fix rendering of bar graphs on dashboard when there are no values.
CIMCO License Server 8.02.04
  • Fixed an issue with reservations in the License Server
CIMCO Software 8.02.03 PreviewReleased: 03-10-17Register to download
Changes since previous version:
CIMCO CNC-Calc 8.02.03
  • Added Haas post processor.
  • Corrected bug exchanged messages for Contour and Pocket.
CIMCO DNC-Max 8.02.03
  • Moxa IoLogic: Added the option to read counter value. The counter is reset when inactive for 2 polls.
  • Split screen: Fixed a couple of 'One dir up' button issues regarding limited browsing and network paths.
  • Split screen: Ctrl+A in Split Screen will now apply to the selected element and not cause all files on PC side to be selected regardless of element focus.
  • Split screen: DNC-Max: Changed Split Window to save state for user rather than local machine to avoid issues with permissions.
  • DNC-Max now explicitly releases FOCAS handle used for MDC when shutting down. It is no longer possible to leave an undeletable file when failing to receive a file using FOCAS.
  • Fixed an issue where folder change in split window could cause the next file transfer to transfer all files in a folder rather than just the selected file.
CIMCO MDC-Max 8.02.03
  • Web client: Fixed issue with character encoding.
  • MT-Connect: Fixed local agent not using template larger than 10.000 bytes.
  • Backdating single reason otherwise send new now searches for all backdatable messages defined for the given downtime start marker, rather than just the ones defined for the screen.
  • Added live screen title (description text) when is the live screen in full screen.
  • Fixed a conflict between timer options 'Signal event when timer reaches:' and 'Restart condition:' which could generate a large amount of events.
CIMCO Software 8.02.02 PreviewReleased: 31-08-17Register to download
Changes since previous version:
CIMCO MDC-Max 8.02.02
  • Optimized timeline report memory usage.
CIMCO Software 8.02.01 PreviewReleased: 25-08-17Register to download
Changes since previous version:
CIMCO DNC-Max 8.02.01
  • Implemented automatic update of DNC client on PC's in the network when a new version is installed on a server.
  • Added support for Moxa E1214 devices in Network I/O
CIMCO MDC-Max 8.02.01
  • Fixed incorrect background color in HTML reports.
  • Fixed not updated event description in Engine configuration.
CIMCO Software 8.02.00 PreviewReleased: 24-08-17Register to download
Changes since previous version:
CIMCO CNC-Calc 8.02.00
  • Splines corrected for negative knot values.
  • New Facing operation with Constant Cut facing.
CIMCO MDC-Max 8.02.00
  • Web client: Added new type of screen: Dashboards. Dashboards work like the known status screens, but offer more visual features such as charts and graphs. The dasboards are only available for web client.
CIMCO Software 8.01.19 PreviewReleased: 01-08-17Register to download
Changes since previous version:
CIMCO MDC-Max 8.01.19
  • NETLink protocol optimization (exclusive access to connect functions)
  • Fixed spindle override calculation in Focas protocol
  • Fixed spindle override calculation in NETLink protocol
  • Fixed export of the Timeline to pie charts.
CIMCO NC-Base 8.01.19
  • Fixed bug with double slash in file path when MSSQL is used.
CIMCO Software 8.01.18 PreviewReleased: 11-07-17Register to download
Changes since previous version:
CIMCO Software 8.01.18
  • Updated German Localization.
CIMCO Edit 8.01.18
  • Added support for searching for multiple filenames or extensions in Advanced Open.
  • Added the possibility to choose whether to search in sub-directories when using Advanced Open.
CIMCO DNC-Max 8.01.18
  • Fixed an issue which broke FOCAS2 transfer.
CIMCO Software 8.01.17 PreviewReleased: 10-07-17Register to download
Changes since previous version:
CIMCO Software 8.01.17
  • Remove outdated HISTORY.TXT from installations.
  • Updated Korean Localization.
CIMCO Edit 8.01.17
  • Heidenhain filter: Fix issue with 5D movements.
CIMCO DNC-Max 8.01.17
  • Fixed issue when $SENDROOT (in advanced directories) is used then return to root directory didnt work.
  • Fixed issue when FOCAS ignores the 'Allow Sending to replace files' option, with it un-ticked it still overwrote files on the machine.
  • Split window will start in full-screen, if it was in full-screen when it was being closed.
CIMCO MDC-Max 8.01.17
  • Fixed issue when CNCINFO[] is evaluated only when CNCINFOTEXT[] is present in formula.
  • Added max connection live time for MSSQL DB connector. After this time when >0, the connection will be closed and opened again.
  • Fixed issue with auto-update of MDC client when MSSQL is used.
CIMCO Software 8.01.16 PreviewReleased: 04-07-17Register to download
Changes since previous version:
CIMCO Software 8.01.16
  • Fixed a software stability issue.
CIMCO Software 8.01.15 PreviewReleased: 26-06-17Register to download
Changes since previous version:
CIMCO DNC-Max 8.01.15
  • Fixed crash of the DNC Admin when 'Send File Advanced dialog' is used.
CIMCO Software 8.01.14 PreviewReleased: 21-06-17Register to download
Changes since previous version:
CIMCO Edit 8.01.14
  • Updated Fanuc filter: Fixes wrong tool reported in backplot when simulating file.
  • Updated Siemens filter.
  • Updated DXF exporting.
CIMCO DNC-Max 8.01.14
  • Implemented 'status log' in split window.
  • Optimization of FOCAS DNC protocol.
  • Added check that program fits the cnc program memory.
CIMCO MDC-Max 8.01.14
  • Implemented a new live chart - tachometer.
CIMCO Software 8.01.13 PreviewReleased: 20-06-17Register to download
Changes since previous version:
CIMCO MDC-Max 8.01.13
  • Implemented OPC protocol for MDC. Both OPC DA, also known as OPC Classic, and OPC UA is supported.
CIMCO NC-Base 8.01.13
  • Implemented option for using customized name of MSSQL database.
CIMCO Software 8.01.12 PreviewReleased: 07-06-17Register to download
Changes since previous version:
CIMCO DNC-Max 8.01.12
  • Auto Import: Added option to keep empty folders in autu import directories when using a static import folder structure.
CIMCO MDC-Max 8.01.12
  • Fixed issue with Excel variables not being correctly updated in reports.
  • Fixed issue with login of user with admin rules.
  • When SYS configuration is changed also LIVE and OUT configurations are reloaded.
CIMCO NC-Base 8.01.12
  • Added option to auto fill the unlock comment box with the last locked comment.
CIMCO Software 8.01.11 PreviewReleased: 26-05-17Register to download
Changes since previous version:
CIMCO MDC-Max 8.01.11
  • Added option to enable exclusive access to MDC configuration.
  • Fixed error message in MDC-Max when License Server is out of clients.
  • Web Client: Now supports external commands on button pushes in Operator Screens. DNC-Max server will execute the command on behalf of Web Client.
  • Implemented new MDC expressions representing live CNC information.
CIMCO Software 8.01.10 PreviewReleased: 15-05-17Register to download
Changes since previous version:
CIMCO MDC-Max 8.01.10
  • Increased number of expressions in an MDC evaluator.
  • Web client: Add support for user login.
  • Web client: Fix bug where weird numbers are sometimes displayed.
  • Web client: Fix bug where sub screens configured to close on button click don't close when button is not standard.
  • Web client: Fix bug where job file buttons do not send all column data.
  • Web client: Add compatibility with buttons configured to be bigger than big.
  • Web client: Render input fields disabled state.
  • Web client: Make graceful fallback when experiencing invalid encoding.
CIMCO Software 8.01.09 PreviewReleased: 11-05-17Register to download
Changes since previous version:
CIMCO MDC-Max 8.01.09
  • Increased number of live evaluated values.
  • Optimized loading of big CSV file.
CIMCO Software 8.01.08 PreviewReleased: 05-05-17Register to download
Changes since previous version:
CIMCO Software 8.01.08
  • Fixed issues with digital signature in XP and Windows Server 2003.
CIMCO CNC-Calc 8.01.08
  • Fixed bug where not all the layer names from a DXF file was captured correctly.
CIMCO MDC-Max 8.01.08
  • Improved info messages in the MDCMaxCMD.exe running from command line.
  • Fixed incorrect numbering of generated tables introduced in the version 8.00.26.
  • Fixed autorefresh of the eventlog when latest is selected.
  • Improved Heidenhain DCOM protocol.
CIMCO Software 8.01.07 PreviewReleased: 27-04-17Register to download
Changes since previous version:
CIMCO MDC-Max 8.01.07
  • Added more time range options (last 2,3,4 days) in list of undefined down times.
  • Added edit box, where is possible to define tags which are checked for 0 values. When all specified analog values are 0 and the machine is in the ACTIVE execution status, then a CYCLESTOP MDC message is generated
CIMCO Software 8.01.06 PreviewReleased: 25-04-17Register to download
Changes since previous version:
CIMCO CNC-Calc 8.01.06
  • Problem with CNC-Calc crashing when Pocket Parameters where saved is fixed.
CIMCO DNC-Max 8.01.06
  • Added help text to the advanced trigger field for send file rename mode.
  • Fixed issue with IOLogic password configuration.
CIMCO MDC-Max 8.01.06
  • Fixed crash of the MDC client when event log is opened and monitorlog archive is empty.
  • Exteded number of live states from 64 to 500.
  • Fixed issue with incorrect backdated messages during Archiving.
  • Fixed crash when generating HTML report from commandline in some cases.
  • Web Client: Operator screens with a single machine now auto-select it instead of displaying a machine selection menu.
  • Web Client: Add support for buttons configured to 'backdate single reason otherwise do send button message'
  • Web Client: Switch to mobile devices from 550px and down instead of 600px
  • Web Client: Fix bug where buttons were incorrectly displayed as enabled/disabled
CIMCO Software 8.01.05 PreviewReleased: 19-04-17Register to download
Changes since previous version:
CIMCO Edit 8.01.05
  • Fixed a regression in Edit that could cause occasional crashes.
CIMCO Software 8.01.04 PreviewReleased: 19-04-17Register to download
Changes since previous version:
CIMCO DNC-Max 8.01.04
  • DNC-Max now supports FOCAS1 paths. They are represented as folders. If there is only one, it is defaulted and used as root.
CIMCO MDC-Max 8.01.04
  • Fixed issue with editing of the Event log when 'Latest' is selcted.
CIMCO Software 8.01.03 PreviewReleased: 18-04-17Register to download
Changes since previous version:
CIMCO Software 8.01.03
  • Updated the Finnish Localization.
  • Most of the software will now run on XP again. Known exceptions are: CNC-Calc, parts of Backplot, NC-Base Server.
CIMCO Edit 8.01.03
  • Fixes an issue where Favorites under Macro in NCAssistant is always selected as the default value on startup.
  • Add any angle chamfering option. Regular chamfering opeation fixed.
CIMCO CNC-Calc 8.01.03
  • Problem with CNC-Calc crashing when Pocket Parameters where saved is fixed.
CIMCO MDC-Max 8.01.03
  • Added HTML report title.
CIMCO NC-Base 8.01.03
  • Fixed issue with incorrect coding of character in MariaDB after upgrade to V8.
CIMCO Software 8.01.02 PreviewReleased: 10-04-17Register to download
Changes since previous version:
CIMCO DNC-Max 8.01.02
  • Fixed crash when opening serial protocol auto receive set.
CIMCO License Server 8.01.02
  • Fixed some bugs with creating license reservations.
CIMCO Software 8.01.01 PreviewReleased: 07-04-17Register to download
Changes since previous version:
CIMCO Software 8.01.01
  • Updated the Polish Localization.
CIMCO Edit 8.01.01
  • Fixes an issue where the selected macro in the NC Assistant is not reflected with the selected macro in the Ribbon and vice versa.
CIMCO CNC-Calc 8.01.01
  • Fix a regression of CNC-Calc that was caused in 8.01.00
CIMCO DNC-Max 8.01.01
  • Added a file translator sheet to auto receive sets in Network Protocol. These are applied only when a file has been associated to an auto receive set.
  • Added GUI field for setting of IOLogic password.
  • Fixed issue when IOLOgic passwords were wiped after closing of DNC server configuration dialog.
  • Added new send file rename option to apply a single advanced trigger replace translator to the filename.
CIMCO MDC-Max 8.01.01
  • Fixed issue with opening of incorrect dialog when last operator screen in the list is being opened.
  • Added option to disable dialog informing user that data was updated and needs to be recalculated.
  • Web Client: Fix bug where live screen headers were not aligned according to configuration
  • Web Client: Fix bug where overview is not clickable when zoom is in use
  • Web Client: If an operator screen has a single machine, auto-select that instead of displaying a sub menu
  • Web Client: Minor design tweaks
CIMCO Software 8.01.00 PreviewReleased: 30-03-17Register to download
Changes since previous version:
CIMCO Software 8.01.00
  • Change the font used in License Terms dialog.
CIMCO Edit 8.01.00
  • Backstage File Information page now shows file information for all valid file types.
  • Fixed an unlocalizable string in Backstage Recent Documents page.
  • Swapped the Cancel and OK buttons in the Compare With dialog to be consistent with other dialogs in the Editor.
  • Fix a layout issue in Backplot that caused some controls to be clipped when simulation is running.
  • Fixed an issue preventing CIMCO Edit from automatically closing on inactivity.
CIMCO MDC-Max 8.01.00
  • Web Client: New look and feel with redesigned user-interface optimized for all devices.
  • Web Client: Clients update automatically when detecting new server version.
  • Web Client: Added option to toggle between dark and light theme.
  • Web Client: Added option to easily change the size of text in Live Screens.
  • Web Client: Added machine overview to top of Live Screens. Can be toggled on/off under options.
CIMCO Software Manager 8.01.00
  • License Servers will now co-operate when they use the same License file. Clients can connect to either one and the available licenses will be distributed as though they were one server. This allows for backup License Servers to be running in the background.
  • CIMCO products will attempt to connect to backup License Servers if the main License Server is down.
  • CIMCO products will actively try to reconnect to the License Server if the connection is lost. This includes trying backup License Servers.
  • CIMCO License Server can now integrate with Active Directory to allow for client reservations based on User Names, User Groups and/or Organizational Units.
  • License Server configuration can be set to only be edited by AD Administrators.
CIMCO Software 8.00.48 PreviewReleased: 24-03-17Register to download
Changes since previous version:
CIMCO Software Manager 8.00.48
  • Fixed an issue relating to renewed Code Signing Certificate.
CIMCO Software 8.00.47 PreviewReleased: 23-03-17
Changes since previous version:
CIMCO Edit 8.00.47
  • Rectangular Pocket (251) and Slot (253) cycles improved. Several other cycles has smal fixes and updates T953.
  • Fixes in parameter calculations (preventing program from hanging under certain conditions) T978.
  • Improved cutter compensation with full circle movement T925.
  • Updated Mazak ISO Filter
CIMCO CNC-Calc 8.00.47
  • The CAM Kernels have ben updated in order to fix a bug in Roughing and Finish Turning.
CIMCO DNC-Max 8.00.47
  • In Directory monitor, the field "Auto Receive -> Associated Files -> Ignore the following files when importing associated files" now handles the wildcard character ( * ).
CIMCO MDC-Max 8.00.47
  • Extended column count for reports from 30 to 100.
  • Fixed issue with Excel templates when data was inserted on incorrect sheet.
  • Fixed issue with months reports with period one month when it created two columns instead of just one column.
  • FOCAS: protocol reads now only running main program (subprograms are ignored).
CIMCO NC-Base 8.00.47
  • Added option to copy associated files along with the main file when using the "Copy approved files to an 'Approved Directory'" option.
  • Removed the additional warning about upgrading to a V8+ database when upgrading from a V8 database.
CIMCO Software 8.00.46 PreviewReleased: 16-03-17Register to download
Changes since previous version:
CIMCO MDC-Max 8.00.46
  • Fixed issue with week numbers in reports.
  • Fixed issue with yearly report with week interval
  • Mitsubishi protocol: Added unique device number
  • Heidenhain protocol: ‘TCPPORT’ parameter moved to section ‘OPTION18’
CIMCO Software 8.00.45 PreviewReleased: 15-03-17Register to download
Changes since previous version:
CIMCO DNC-Max 8.00.45
  • Fixed deadlock in the DNC server when a barcode reader is used together with DPRNT from machine.
CIMCO MDC-Max 8.00.45
  • Added a new button function on operator panel -> ‘Backdate single reason’
  • Fixed auto-close of sub-screen when a button is pressed and backdating function is selected.
  • Fixed issue with loaded incorrect Excel template in some cases.
  • Fixed issue: 'Select job(s)' and 'Select program(s)' features don’t work.
  • Fixed issue: Breaks are splitting the tables even when interval is one day.
  • Updated MOXA DLL for support of new IOLogic units with firmware 2.5
CIMCO Software 8.00.44 PreviewReleased: 7-03-17Register to download
Changes since previous version:
CIMCO Edit 8.00.44
  • Fixed an issue with saving to files with the HIDDEN attribute set.
CIMCO Software 8.00.43 PreviewReleased: 03-03-17Register to download
Changes since previous version:
CIMCO CNC-Calc 8.00.43
  • Error with loading DXF Splines corrected.
CIMCO MDC-Max 8.00.43
  • MT-Connect: Fixed multiple events triggered when monitoring faults and warnings.
CIMCO Software 8.00.42 PreviewReleased: 03-03-17Register to download
Changes since previous version:
CIMCO Software 8.00.42
  • It is now possible to configure time-out on connecting to the License Server, as well as configuring retry count + retry interval.
CIMCO DNC-Max 8.00.42
  • Fixed a rare issue where some TRAUB files could crash the DNC-Max server.
  • Client: Reintroduced the checkboxes for toggling date and time in the log view.
CIMCO MDC-Max 8.00.42
  • Web Client: Fix bug where values could not be submitted.
  • FOCAS: Added detection of 'O' in the Fanuc program name before conversion to O-number: O38 -> O0038.
CIMCO NC-Base 8.00.42
  • Fixed a race condition which could cause the NC-Base Client to freeze when opening a file by double-clicking it while previewing a different file.
CIMCO Software 8.00.41 PreviewReleased: 27-02-17Register to download
Changes since previous version:
CIMCO Edit 8.00.41
  • Heidenhain filter: Fixed cylces 208, 232, 256,257, 262 and 267.
CIMCO Software 8.00.40 PreviewReleased: 17-02-17Register to download
Changes since previous version:
CIMCO Edit 8.00.40
  • File Compare now jumps to next/previous difference relative to cursor position.
CIMCO MDC-Max 8.00.40
  • Added new report type based on Excel template. It allows into one Excel sheet insert multiple tables on different position in the sheet. This report can be generated as an Excel file or as a PDF document displayed in the MDC client tab.
  • Fixed incorrect disabling of username and password fields in the client logon setup sheet introduced with the AD option.
  • Extended limit of operator and live screens from 50 to 1024.
  • Removed limitation of table (rows*columns>10000000) -> now unlimited + checking memory exception.
  • Added unique id for pictures in HTML reports.
  • Heidenhain protocol removed float type for feed rate, spindle speed, rapid feed rate and this value is no more *100 in transmission protocol.
  • Added information about range for feed rate, spindle speed, rapid feed rate in the event log message variable 2.
  • Extended 'SLEEPRESTART' in the Heidenhain protocol from 5000 ms to 100000 ms.
  • Added option to multiply overrides for Heidenhain OCX.
  • FOCAS UI setup dialog doesn’t disabled 'O number format' combo box when protocol was not enabled.
CIMCO NC-Base 8.00.40
  • Fixed issue with NCBase server introduced in V 8.00.38, when 'mdc and 'ncbase' databases are missing in fresh NC-Base installation.
CIMCO Software 8.00.39 PreviewReleased: 10-02-17
Changes since previous version:
CIMCO Software 8.00.39
  • Demo periods can once again be extended using extension codes like it was possible prior to version 8.
CIMCO Edit 8.00.39
  • Fix an issue where Keyboard Shortcuts customizations were not persisted correctly.
CIMCO DNC-Max 8.00.39
  • FOCAS: Fix issue when no program was selected.
CIMCO MDC-Max 8.00.39
  • Fixed Chinese characters in PDF reports.
CIMCO Software 8.00.38 PreviewReleased: 06-02-17
Changes since previous version:
CIMCO DNC-Max 8.00.38
  • FOCAS: Implemented option to convert a program name to Fanuc O number in case that the name is a number. MCH file section FOCAS, key RENAMETOONO, values: '', '1', '0001', 'O0001'.
CIMCO MDC-Max 8.00.38
  • Fixed timeline popup issue introduced in V 8.00.35 with translations.
CIMCO NC-Base 8.00.38
  • ORACLE: Added update of ORACLE DB to V 8.00.01.
  • Fixed issue with NCBase Server when a message 'Do you want to install sample DB?' appears when database is started even if it is already installed DB.
CIMCO Software 8.00.37 PreviewReleased: 02-02-17Register to download
Changes since previous version:
CIMCO Software 8.00.37
  • Updated Spanish translation.
  • Fixed an issue which prevented non-html formatted help texts from being displayed.
CIMCO Edit 8.00.37
  • Heidenhain filter: Improved work with Q-parameters.Add calculations safety check.
  • Siemens filter: Support of advanced tool naming T='Alpha_Numerical_tool_name' is allowed.
  • Advanced Renumbering: Ignoring numbers inside brackets while renumbering.
CIMCO DNC-Max 8.00.37
  • Fixed issue in the network protocol with keeping directory structure in case that directory name contains '.'
CIMCO MDC-Max 8.00.37
  • MT-Connect: Added option to disregard faults and warnings as alarms.
  • MT-Connect: Added option to ignore specific alarms.
  • Web Client: Optimize bandwidth usage by use of WebSockets and reducing included asset files
  • Web Client: Improved support for IE 11
CIMCO Software 8.00.36 PreviewReleased: 26-01-17Register to download
Changes since previous version:
CIMCO DNC-Max 8.00.36
  • Fixed connection issue with DNCMaxCtrl.exe when a requested program is not found.
CIMCO MDC-Max 8.00.36
  • Fixed issue with Active Directory integration.
CIMCO Software Manager 8.00.36
  • Software Manager can now export the License Server log in a human readable format.
  • Software Manager now contains a direct link to open it's documentation.
CIMCO Software 8.00.35 PreviewReleased: 24-01-17Register to download
Changes since previous version:
CIMCO Edit 8.00.35
  • Okuma, Mazak, Heidenhain, Heidiso filters: Use 'Block Number - N' instead of 'Tool Number – T' in Toolpath Statistics.
  • Heidenhain filter: Fixed issue with Z/W values.
  • Willemin filter: Fixed plotting issues.
CIMCO DNC-Max 8.00.35
  • Fixed issue introduced in V 8.00.33 when auto-receive folder was deleted if associated files were not enabled.
CIMCO MDC-Max 8.00.35
  • Added custom translations of Live and Operator screen and reports.
  • Added Active Directory integration for User Control in MDC-Max.
  • Web Client: Optimized entire interface for a much faster experience.
  • Web Client: Added support for button disabled state.
  • Web Client: Fix bug where screens stop refreshing when the configuration changes
  • Web Client: Added custom langauge selector on Front Page.
CIMCO Software 8.00.34 PreviewReleased: 20-01-17
Changes since previous version:
CIMCO Software 8.00.34
  • Removed Mitsubishi DCOM client libraries from the installer to solve issue with the installer on some computers.
CIMCO Edit 8.00.34
  • Okuma filter: Filter updated.
  • Siemens filter: Add support for RP= and AP=, G110/G111/G112, and polar coordinates.
CIMCO MDC-Max 8.00.34
  • Fixed issue with HTML reports don't show timeline if sub-type of graph is pie chart.
  • Fixed issue with the event log when ‘Latest’ is selected and no data is in the ‘monitorlog’ table.
  • Fixed issue with not updating title of DB tables in GUI setup of the DB View.
  • Optimized pie chart code.
  • Fixed issue with incorrect count of time intervals in reports in some special cases.
CIMCO Software 8.00.33 PreviewReleased: 17-01-17
Changes since previous version:
CIMCO Software 8.00.33
  • Fixed some Spanish translations in the installer.
  • Solved an issue where certain Windows Group Policies would prevent installer translations from being cached as normally upon installation, thereby causing uninstallation and upgrades to fail with the error message 'Error applying transforms. Verify that the specified transform paths are valid.'
CIMCO DNC-Max 8.00.33
  • Added option to ignore requested programs from given directories when a multi request - wild search is used.
  • ixed issue with not keeping directory structure (when 'Keep directory structure is used' and also sharing programs between machine groups in ncbase is active) and remote request search for programs in data storage of another machine or program is sent from editor-ncbase to another machine that it can share programs with.
  • Fixed issue with not deleting an empty folder in auto-receive directory if there are no associated files.
  • Fixed issue with clear of Send folder if it has sub-folders - directory structure.
CIMCO MDC-Max 8.00.33
  • Fixed issue with Haas protocol, it doesn’t show MONONLINE/MONOFFLINE correctly.
  • Fixed issue with IOLogic when it doesn’t show MONOFFLINE after server startup when the unit is offline.
  • Mitsubishi protocol - Implemented option to select multiple alarms group to be read from the controller.
CIMCO Software 8.00.32 PreviewReleased: 10-01-17Register to download
Changes since previous version:
CIMCO Edit 8.00.32
  • Prevented Editor Standard from grabbing Editor Pro licenses from the License Server if standard licenses are available.
CIMCO DNC-Max 8.00.32
  • FTP Synchronization upgrades: Now works with FANUC Data Server. Supports one-way synchronization and forced mirroring. Supports mapping of an extension on the PC side to no extension on the CNC side. Useful for having program associations to files that are required to have no extension on the CNC. Can now do a separate synchronizer specific log.
CIMCO Software 8.00.31 PreviewReleased: 06-01-17Register to download
Changes since previous version:
CIMCO Software 8.00.31
  • CIMCO software now supports Mazak Smooth-C files for the purpose of comment extraction in NC-Base and DNC-Max as well as viewing in the Editor.
CIMCO Edit 8.00.31
  • Mazak Viewer updated.
CIMCO CNC-Calc 8.00.31
  • Calculation of the snap distances now uses the square distance to to find the shortest distance. Thereby the calls to the square root functions has been eliminated and performance enhanced.
CIMCO Software 8.00.30 PreviewReleased: 04-01-17Register to download
Changes since previous version:
CIMCO Edit 8.00.30
  • Added Formulas to Edit example Macros.
  • Fix an issue with Macros containing Formulas.
CIMCO DNC-Max 8.00.30
  • Added option to sort machine list alphabetically on column header click in global change manager dialog.
CIMCO MDC-Max 8.00.30
  • Backdating: Implemented option to read downtime-list from archives.
  • Fixed event log issue with incorrect filtering of selected messages in some cases.
CIMCO NC-Base 8.00.30
  • Program info is updated when a selected version (backup) is restored in case that the option 'Update program info when editing files' is checked.
  • Fixed issue with machine group templates when editor type was not copied from selected template, when creating a new machine group.
  • Machine group template - removed default extension NC when template has no extension.
CIMCO Software 8.00.29 PreviewReleased: 02-01-17Register to download
Changes since previous version:
CIMCO Edit 8.00.29
  • Heidenhain filter: Fixed work with subroutines.
  • Heidenhain filter: Fixed bugs in parameter programming.
  • Heidenhain filter: Added PLANE PROJECTED and PLANE POINTS commands.
  • Heidenhain filter: Fixed polar coordinates movements.
  • Fanuc filter: Fixed G68.2 command.
  • Added the ability to Mirror Toolpath on Turning programs.
CIMCO DNC-Max 8.00.29
  • Fixed an issue where FOCAS2 transfers of large files would fail on Makinos machines with FANUC controls.
  • Fixed an issue where the DNC-Max Client would sometimes fail to open the Send File protocol and freeze for two minutes instead.
  • Directory monitor: 'Send directory is cleaned' now also including sub-directories.
  • Added option to clean monitoring directory (including sub-directories) when auto receive failed.
CIMCO Software 8.00.28 PreviewReleased: 22-12-16Register to download
Changes since previous version:
CIMCO Edit 8.00.28
  • Advanced Renumbering: Block skip added.
  • Editor now uses ConfigPaths.cfg from old installations (if it exists) to import configuration files.
CIMCO CNC-Calc 8.00.28
  • Bug with Tolerances not being used in Constant Cut Milling has been corrected.
  • Added fanuc NO K and heidenhain incremental postprocessors.
CIMCO MDC-Max 8.00.28
  • Implemented GUI option for configuration of DBView with setup of excel template for each db table.
  • Fixed issue in yearly reports with weekly period and extended schedule with start work week on Sunday.
CIMCO NC-Base 8.00.28
  • Extended ncbase program format triggers to read up to 100,000,000 lines (original limit 1000) for case that program header is placed at the end of the program/file.
  • ORACLE: changed default values in db table machinegroups -> fixed issue with adding a new machine group.
CIMCO Software 8.00.27 PreviewReleased: 16-12-16Register to download
Changes since previous version:
CIMCO Edit 8.00.27
  • Advanced Renumbering can now ignore lines starting with defined parameters.
  • Fanuc filter updated.
  • Fixed issue preventing Cimco Edit from being able to automatically closing.
CIMCO DNC-Max 8.00.27
  • Network protocol: Added auto receive compare and failed reception report.
CIMCO License Server 8.00.27
  • Cleaned up event log source inconsistencies.
CIMCO Software 8.00.26 PreviewReleased: 05-12-16Register to download
Changes since previous version:
CIMCO MDC-Max 8.00.26
  • Implemented message filter in event log.
  • Introduced partial rebuild – support for backdating with enabled central cache.
  • Introduced editing of messages older the 'today' in the event log with enabled central cache.
  • DNC server does check for a running MTConnect agent only running from CIMCO DNC server install path.
  • Fixed resolving of excel filename by export to excel – it removed all after first ‘.’ found from the left.
  • Introduced multi-threaded rebuild.
  • Introduced real-time update of OPENED rows in real-time DB tables.
  • Implemented automatic server restart if any MDC thread gets memory exception (out of memory).
  • ORACLE: Changed type of columns in the monitorlog and shadowmonitorlog from CLOB to VARCHAR2(255).
  • MARIEDB: MySQL connector updated to fetch all results into internal application buffer.
CIMCO License Server 8.00.26
  • V8 License Servers now kill V7 License Servers if they use a permanent keyfile.
CIMCO Software 8.00.25 PreviewReleased: 01-12-16Register to download
Changes since previous version:
CIMCO Software 8.00.25
  • Finnish translations updated.
CIMCO Edit 8.00.25
  • Filters updated.
  • Mazatrol Viewer: Improved Matrix functions.
CIMCO DNC-Max 8.00.25
  • Remote Request Execute now has the option to evaluate program parameter string for Environment Variables and to execute the external process before looking up the remote request.
CIMCO Software 8.00.24 PreviewReleased: 23-11-16Register to download
Changes since previous version:
CIMCO CNC-Calc 8.00.24
  • Problem with Turning Post Processors MOVE_LAST variable solved.
CIMCO DNC-Max 8.00.24
  • DNC-Max can now track progress of a dripfeed file transfer. This progress can be used to restart an interrupted transfer. Code has also been implemented to construct a meaningful header for resume of transfer for very simple 3-axis programs.
CIMCO MDC-Max 8.00.24
  • Fixed memory leak in brother http monitor.
CIMCO Software 8.00.23 PreviewReleased: 16-11-16Register to download
Changes since previous version:
CIMCO Edit 8.00.23
  • Fixed issue with limitation of macro inputs fields to max 15 characters.
CIMCO DNC-Max 8.00.23
  • Fixed issue preventing DNC-Max from running in pure demo mode.
  • Added debug message in DNC client debug window when translator finds an MDC message.
  • FTP Server: Added more clear return codes when doing unsupported commands and doing commands before login was completed.
CIMCO MDC-Max 8.00.23
  • Optimized MTConnect memory usage.
  • Added GUI option for Mitsubishi protocol – Alarm filter and NC type.
CIMCO Software 8.00.22 PreviewReleased: 11-11-16Register to download
Changes since previous version:
CIMCO Edit 8.00.22
  • Fixed a crash when closing files on slow file systems, such as network shares, with response times in the seconds range.
CIMCO Software Manager 8.00.22
  • Fixed a crash related to third party firewall programs.
CIMCO Software 8.00.21 PreviewReleased: 10-11-16Register to download
Changes since previous version:
CIMCO CNC-Calc 8.00.21
  • Error with splines with polynomial = 1 but 3 control points corrected. Now we use the first and last control point to create the line.
CIMCO DNC-Max 8.00.21
  • Handheld terminal port: Fixed error where NULL character was received between messages.
CIMCO MDC-Max 8.00.21
  • Calculation can be extended up to 30 days (Engine cfg file section [GENERAL] -> RECALCDAYS = 1).
CIMCO Software 8.00.20 PreviewReleased: 08-11-16Register to download
Changes since previous version:
CIMCO Software 8.00.20
  • Fixed Japanese translations in V8.
CIMCO Edit 8.00.20
  • Fixed error when saving hidden files.
CIMCO NC-Base 8.00.20
  • Automatic logout timing has been fixed.
CIMCO License Server 8.00.20
  • Changed License Server default port to 4460. Also made the clients auto-detect the License Server's TDC port, making the manually set port a fallback.
CIMCO Software 8.00.19 PreviewReleased: 02-11-16Register to download
Changes since previous version:
CIMCO License Server 8.00.19
  • Fixed issue causing high cpu usage.
CIMCO Software 8.00.18 PreviewReleased: 31-10-16Register to download
Changes since previous version:
CIMCO Software 8.00.18
  • Installer now sets required permissions to CIMCO's Program Data folder during install.
  • Added file permission checks to most license operations.
CIMCO Edit 8.00.18
  • Added ISO Turning G2<->G3 (beta) filter.
  • Fixed issues with Traub simulation.
CIMCO NC-Base 8.00.18
  • Fixed revisions always updating when having 'revision all saves' unchecked and 'backup before and after save' checked.
CIMCO Software 8.00.17 PreviewReleased: 28-10-16Register to download
Changes since previous version:
CIMCO Edit 8.00.17
  • Fixed DNC Client not showing ports in editor when NCBase login is used
CIMCO DNC-Max 8.00.17
  • Implemented FOCAS 1 compatibility. This compatibility mode can be enabled in the Directory Monitor protocol under Advanced -> Protocol -> Limit to FOCAS 1.
  • Added option to send multiple files using remote request jobfile.
CIMCO NC-Base 8.00.17
  • Fixed restore database V5 to different folder.
CIMCO Software 8.00.16 PreviewReleased: 26-10-16Register to download
Changes since previous version:
CIMCO CNC-Calc 8.00.16
  • Problem with splines loaded from DXF has been corrected.
CIMCO NC-Base 8.00.16
  • Fixed issue with install of mariadb after introducing ORACLE connector.
CIMCO Software 8.00.15 PreviewReleased: 24-10-16Register to download
Changes since previous version:
CIMCO Software 8.00.15
  • Implemented ORACLE Database connector.
CIMCO Edit 8.00.15
  • Scroll bars now correctly drawn when using double-click to open files.
CIMCO DNC-Max 8.00.15
  • DNC-Max FTP Server port welcome message has been shortened to 1 line response.
  • Fixed problem when doing file reception using telnet interface with network protocol ports
CIMCO MDC-Max 8.00.15
  • Added option to restart Heidenhain OCX protocol after machine gets online, which solves issue with function FN38.
CIMCO License Server 8.00.15
  • Improved error logging on License Server crashes.
  • Fixed a License Server crash related to UDP broadcasts on the same port that the License Server listens to.
CIMCO Software 8.00.14 PreviewReleased: 14-10-16Register to download
Changes since previous version:
CIMCO Edit 8.00.14
  • It is now possible to define parameters in a macro as a multiple-choice option. The choices will be available as a drop-down combobox when inserting the macro. Visible labels in the combobox and inserted values can be set individually.
  • Loading of Ribbon customization is now silent.
CIMCO MDC-Max 8.00.14
  • Fixed problem with breaks - Bar graphs would split in breaks.
  • Added landscape/portrait orientation in html reports
CIMCO License Server 8.00.14
  • Removed delayed start from the default setting of the License Server service.
CIMCO Software 8.00.13 PreviewReleased: 10-10-16Register to download
Changes since previous version:
CIMCO Software 8.00.13
  • Fixed an error which could cause slow load times for CIMCO products..
CIMCO Edit 8.00.13
  • Fixed a race condition which could cause crashes on slow file systems.
  • Updated german help.
CIMCO CNC-Calc 8.00.13
  • Updated CNC-Calc help.
CIMCO DNC-Max 8.00.13
  • Fixed MITSUBISHI EZSOCKET TCP port section.
  • Now when the user chooses a theme for the DNC-Max Client the whole app follows that theme. Users can switch between DARK and LIGHT theme.
CIMCO MDC-Max 8.00.13
  • Fixed issue with DB view icon not showing up when real-time DB table JOB/PROGRAM/OPERATOR is active.
  • Fixed issue with last columns in DB view not showing values
CIMCO Software 8.00.12 PreviewReleased: 03-10-16Register to download
Changes since previous version:
CIMCO Software 8.00.12
  • Updated help files.
CIMCO Software 8.00.11 PreviewReleased: 28-09-16Register to download
Changes since previous version:
CIMCO Software 8.00.11
  • Demo popups will now always appear again if no license file or server in use.
  • Fixed cosmetic issue where empty lines were removed from help texts.
CIMCO Edit 8.00.11
  • Macro dropdown lists now auto resizes to try and fit largest found text entry.
  • Changed Editor macro controls order.
  • Added tab colors to indicate file status (changed, read-only).
CIMCO DNC-Max 8.00.11
  • Fixed control sizes in split window configuration dialog.
  • Network protocol: Added option to delete associated files on auto receive reception, but only the files not found in the new auto receive reception.
  • Fixed an issue where failed auto imports with import queue turned on would leave empty temporary files behind, eventually blocking further import queue usage.
CIMCO MDC-Max 8.00.11
  • Fixed crash of MDC client when is not connected to DB.
CIMCO Software 8.00.10 PreviewReleased: 23-09-16Register to download
Changes since previous version:
CIMCO DNC-Max 8.00.10
  • Handheld terminal: Fixed error where Handheld Terminal could not process 2 DPRNT statements at the same time.
CIMCO MDC-Max 8.00.10
  • Fixed issue when MDC client stays being most top after exiting full screen.
  • Improved user login icons.
  • Login screen is now closed even if the same user is logged in again.
CIMCO License Server 8.00.10
  • Fixed an UDP socket leak.
CIMCO Software 8.00.09 PreviewReleased: 22-09-16Register to download
Changes since previous version:
CIMCO Edit 8.00.09
  • Macro favorites added. In Macro Setup dialog, macros can be favorited using the 'star' icon. Favorited macros will be shown in the new 'favorite' macro group.
CIMCO MDC-Max 8.00.09
  • Fixed webclient not being able to do automatic backdate.
CIMCO Software 8.00.08 PreviewReleased: 09-09-16Register to download
Changes since previous version:
CIMCO CNC-Calc 8.00.08
  • Undo and Redo now works when drawing workspace is changed in Document.
CIMCO MDC-Max 8.00.08
  • Web client: Added keepalive signal to info server.
CIMCO NC-Base 8.00.08
  • Fixed Cimco Edit hanging when double clicking associated file.
CIMCO Software 8.00.07 PreviewReleased: 05-09-16Register to download
Changes since previous version:
CIMCO Software 8.00.07
  • Users will no longer be asked to confirm overwriting temporary license files.
  • License popups, such as key about to expire, will now only appear once per day except if there is something new to report or if the program won't run at all.
  • License key expiration warnings now specify if the key is on a License Server. If so, the popup will only appear the last ten days.
  • License Files containing HSM Performance Packs can now be installed properly directly from the Key Manager.
  • License Files containing License Server can now be installed directly from the Key Manager. This includes (re)starting the License Server if appropriate.
CIMCO Edit 8.00.07
  • Fixed a number of issues when editing files with percentage (%) in the filename.
  • Fanuc filter: Fixed issue with G43 H command.
CIMCO DNC-Max 8.00.07
  • Added ability to chose between DARK and LIGHT log themes in DNC-Max.
CIMCO MDC-Max 8.00.07
  • Edited events are updated directly without refresh of all event log content
  • Fixed issue with excel template filenames
CIMCO NC-Base 8.00.07
  • Fixed not creating backup when closing editor frame with 'x' and choosing to save file.
CIMCO License Server 8.00.07
  • Added more information to the License Server Information window: Keyfile type and time left if applicable, Keyfile maintenance expiration date, keyfile install time.
  • It is now possible to add an alias to a reservation as a reminder of what the reservation was for.
  • Fixed issue where reservation input fields would not become editable again after having had a reservation selected.
  • Fixed an issue where client connections to License Servers would fail if the client had changed IP, prompting the user to choose the License Server again.
CIMCO Software 8.00.06 PreviewReleased: 30-08-16Register to download
Changes since previous version:
CIMCO Edit 8.00.06
  • Fixed issue where an extra line would be inserted after advanced renumbering.
  • Backplot filters renamed to reflect working status better.
  • Fixed issues with time statistics.
CIMCO CNC-Calc 8.00.06
  • Added CNC-Calc Redo functionality.
CIMCO MDC-Max 8.00.06
  • dded support for Heidenhain iTNC640.
  • Removed Order View, replaced by DB View.
  • Added UI setup for multiple items separated by ';' in 'Show value' on operator screens.
  • Temporary cache files stored in windows temp folder.
  • Number of timers increased to 224.
  • Allow editing event log when central cache is disabled.
  • Improved MSSQL performance.
  • Fixed issue with crashing MDC client when log graph has no data.
  • Implemented PING command in LIVE protocol to avoid problems with losing connections of live/operator screens.
  • Fixed issue with not basic ASCII characters in pie charts.
  • Fixed issue when MDC doesn’t generate a monthly report with only today data.
  • Fixed issue with high CPU usage of MDC client when system is in 'Calculation'.
CIMCO NC-Base 8.00.06
  • Fixed wrong database Base Directory when using MS SQL.
  • Fixed issue with import queue in ncbase when using MS SQL.
CIMCO Software 8.00.05 PreviewReleased: 23-08-16Register to download
Changes since previous version:
CIMCO Edit 8.00.05
  • Fixed crash when using close-and-save on slow filesystems.
CIMCO DNC-Max 8.00.05
  • Mazak Serial Protocol: Cleaned up behavior of the options to use comments as filenames.
CIMCO Software 8.00.04 PreviewReleased: 22-08-16Register to download
Changes since previous version:
CIMCO Software 8.00.04
  • Fixed an issue where CIMCO software would not work when installed on the same computer as the newest version of Esprit software suite.
  • Updated Portuguese translations
CIMCO Edit 8.00.04
  • Fixed memory leak in Cimco Edit.
  • Fixed issue with time statistic.
  • When setting up a macro in the Editor, it is now possible to specify a unique illustration for each individual parameter in the macro.
CIMCO MDC-Max 8.00.04
  • Web Client: Fixed operator screen button indicators not updating correct.
CIMCO NC-Base 8.00.04
  • Fixed an issue where various log outputs would blank as soon as they exceeded their original window size.
  • Fixed crash of ncbase directory change setup dialog in some cases.
CIMCO License Server 8.00.04
  • Changed License Server service startup to Automatic with delayed start to ensure that all dependencies and networks are available on start. Added a 5 minute retry window for CIMCO programs starting in service mode to prevent issues where these programs wouldn't be able to start if the License Server started after them.
  • Fixed product name order in the combobox for choosing product when adding reservations in the License Server.
CIMCO Software Manager 8.00.04
  • Fixed issue where the Software Manager didn't handle the case of starting an already installed but not running License Server optimally.
CIMCO Software 8.00.03 PreviewReleased: 17-08-16Register to download
Changes since previous version:
CIMCO Edit 8.00.03
  • Redesigned Advanced Open dialog.
  • Fixed issues with Advanced Renumbering.
  • Fixed a problem where statusbar Linenumber/Column numbers were swapped.
  • Fixed problem where file windows could not be restored correctly after doing file compare of non-maximized windows.
CIMCO MDC-Max 8.00.03
  • Fanuc FOCAS - added option to generate MDC message when value of given macro is changed - the value is stored in message variable 1
CIMCO NC-Base 8.00.03
  • NC-Base client is now able to create a backup before and after manual editing. This improves versioning of files when using DNC-Max directory monitoring.
CIMCO Software 8.00.02 PreviewReleased: 04-08-16Register to download
Changes since previous version:
CIMCO Edit 8.00.02
  • Clicking Browse in Advanced Open now browses to the last selected directory.
  • Editor FTP configuration sheet made more clear.
  • Fixed a number of issues to do with File Compare.
  • It is no longer possible to change filter while simulation is running.
  • Fixed problem with external commands when ncbase is active.
  • Fix an issue where multiple document window arrangement functionality was not working as expected.
CIMCO CNC-Calc 8.00.02
  • Bug with cursor that moved when text was entered has been fixed.
CIMCO DNC-Max 8.00.02
  • Network protocol: Fixed error where send translator could not use environment variables (example $SENDFILENAME).
  • Auto Receive: When auto receiving a file, and the 'update fields after receiving' is enabled, the Program field is also updated following the configuration set in NC-Base Program format.
  • Remote Request: Fixed issue where environment variables could not be used in Remote Request configuration.
  • Fixed DNC-Max Client not being able to preview files in send window in some cases.
  • Fixed error where Heidenhain FE serial protocol would not detect DPRNT/Barcode messages.
CIMCO MDC-Max 8.00.02
  • MSSQL connector optimization.
  • Added MDC Mitsubishi protocol
  • Fixed incorrect filtering in the event log
CIMCO License Server 8.00.02
  • Product listings in KeyManager and License Server Info are now sorted alphabetically by name.
  • Removed popup allowing users to install license files to run from a custom location. Rest of the code remains, can still be set up manually.
  • Fixed issue where empty reservation criteria would match any computer.
CIMCO Software Manager 8.00.02
  • License.dll should no longer look corrupt to the Software Manager on computers with no internet connection.
CIMCO Software 8.00.01 PreviewReleased: 13-07-16Register to download
Changes since previous version:
CIMCO MDC-Max 8.00.01
  • Fix issues with report generation.
  • Fix issue with importing of Excel documents.
  • Fix an issue with displaying of Pie Charts values.
CIMCO NC-Base 8.00.01
  • Improvements in MSSQL connector.
CIMCO License Server 8.00.01
  • Fixed issue where empty reservation criteria would match any computer.
  • Removed popup allowing users to install license files to run from a custom location. Rest of the code remains, can still be set up manually.
CIMCO Software 8.00.00 PreviewReleased: 24-06-16Register to download
Changes since previous version:
CIMCO Edit 8.00.00
  • Read our news about CIMCO Software 8 here
  • Redesigned modern user-interface with fully customizable ribbon
  • New FTP client integrated with the Editor transmission utility
  • New advanced Open File dialog
  • Improved document editing features
  • Improved backplotting and more converters have been added
CIMCO CNC-Calc 8.00.00
  • New strategy added: Constant Cut Inside Out
  • New strategy added: Constant Cut Inside In
  • New strategy added: Constant Cut Turning
  • Improved help system with illustrations
CIMCO DNC-Max 8.00.00
  • Redesigned user-interface for both the stand-alone application and CIMCO Edit plugin.
  • Support for transmitting Brother MDC signals via HTTP
CIMCO MDC-Max 8.00.00
  • Redesigned user-interface
  • Multi-threaded engine on the server side
  • Central cache + archiving process
  • New user permission system
  • Conditionally disabled buttons or input fields
  • Combo box on operator screen can show CSV values
  • Automatic software update of MDC Client
  • New database tables – tables are filled in real-time
  • Export of Event log and Order view to Excel
  • Operator notifications
  • Multiple schedule with arbitrary start of work week
  • Extended report selection window
  • CPU affinity for multi-threaded engine
  • Sending reports in emails from command-line
  • HTML reports in PDF
  • Support for XLSX and XLSM formats
  • New MSSQL database connector
  • Operator screen can show users loaded from database
  • Support for Brother HTTP protocol – C00
CIMCO NC-Base 8.00.00
  • Marie DB is now the primary database supporting MySQL V5, encryption and more.
CIMCO License Server 8.00.00
  • Rewritten from the ground up
  • New option to activate license keys directly from the software
  • Improved encryption of keys and security of activations
  • Clients can now display who is using which licenses
  • Licenses can be reserved on the License Server
  • License Servers are able to run in a two-server system
CIMCO Software Manager 8.00.00
  • Initial release.