CIMCO Software 2025 Releases

ShowAll releases Downloads only

Release notesExpand all Collapse all

CIMCO Software 2025.01.29 Released: 11-02-26Register to download

Changes since previous version:

CIMCO Edit 2025.01.29

Fix: Reverse post: radius compensation issue in mill-turn mode.
Fix: Reverse post: issue with machine subprogram macro calling multiple times in some cases.
Fix: Heidenhain reverse posts: cycle 200.
Fix: Reverse post: not recognized some operators.
Fix: Flexium milling reverse post: WHILE, E50000, G151.
Fix: Mazak milling reverse posts: probing cycles output #135, #136.
Fix: Fanuc turning reverse posts: G94 feedrate, G28 non-linear interpolation.
New: Heidenhain reverse posts: control setting for PLANE retraction mode.
Fix: wrong symbols in workpiece/fixture file names in Geometry manager for some locales.
Fix: Flexium reverse post: G151, G59, G52.
Fix: Fanuc milling reverse post: G68.4.
Fix: Fanuc turning StarGB reverse post extension: M50, M51.
Fix: Mazak SmoothAi Milling with Turning reverse post: G92.

CIMCO Software 2025.01.28 Released: 02-02-26Register to download

Changes since previous version:

CIMCO Edit 2025.01.28

Fix: Mazak milling reverse posts: G68.4.
Fix: Fanuc turning reverse posts: supported G32 Q-value.
Fix: Siemens milling reverse post: G4.
Fix: Heidenhain reverse posts: cycle 203 feed rate.
Fix: Mazak reverse post: supported .did subprogram extension.
Fix: Heidenhain reverse posts: cycles 208, 262, 265.
Fix: Reverse post: wrong tilt angle for positive/negative tilt mode in some cases.
New: Heidenhain reverse post: TCH PROBE 441.
Fix: Reverse post: wrong milling tool orientation for some mill-turn controls.
Fix: Crash when adding stock in legacy simulation window.
New: Added a 4 axis head generic machine.
Fix: Heidenhain reverse posts: PLANE AXIAL.
Fix: Heidenhain milling reverse post: PLANE ... STAY issue with rotary moves, position output issue.
Fix: Mazak SmoothAi reverse posts: variables #60000-#61999.
New: Showing currently called subprogram's code in fast simulation. (S23299)
Fix: Added "Use machine setup feedrates" setting. Fixed time calculations. (S27370)
Fix: Mazatrol Viewer: Fixed an issue causing incorrect cutting speed values to be shown. (S27393)
Fix: Fanuc turning reverse post STAR extension: drilling axis issue.
Fix: Fanuc milling reverse post: G68.3, G68.4.
New: Improved stock model simulation speed immediately after startup.
Fix: Heidenhain ISO milling reverse post: G98.
Fix: Corrupt collision report messages in some languages.
Fix: Siemens reverse posts: added subprogram search settings.
New: Added color picker to tool assemblies.
Fix: Reverse post: wrong Z position when using collinear axes in some cases.
New: Toolpath color by tool now supported in the fast simulation window.

CIMCO DNC-Max 2025.01.28

Fix: Fixed an issue where dialog to show missing permissions was not shown in some cases.
Fix: Web Client: Fixed an issue preventing manual reordering of machines within groups.
New: Web Client: Added support for showing startup banner defined in the NC-Base configuration.
New: Added support for showing startup banner defined in either the NC-Base configuration or the DNC-Max server configuration.
Fix: Fixed an issue with authentication for telnet.

CIMCO MDC-Max 2025.01.28

New: Added options in DNC server setup dialog to enable / disable MDC WEB API and change TCP ports. WEB API is now disabled by default.
Fix: Fixed issue with UTF8 characters in charts in MDC PC client.
New: Introduced a new feature bulletin that supports slideshow presentation of media files in BMP, PNG, JPG, and PDF formats. (S27343)
New: Added a new button function, "Auto-close of sub-screen", which triggers when the specific button is pressed. (S23162)
New: Added F1 help for the Button Function Data field. The caption is now updated based on the selected button function. The Button Function Data field now supports multiple lines. (S27182)

CIMCO NC-Base 2025.01.28

Fix: Web Client: Improved performance and behavior of file preview and download.
Fix: Web Client: Sharing programs with other machine groups when sending now works.
Fix: Updated the Machines > Extensions settings sheet, so changes can now be canceled.

CIMCO Software 2025.01.27 Released: 08-01-26Register to download

Changes since previous version:

CIMCO Software 2025.01.27

Change: Encrypted MariaDB connections do not require server certificate verification.

CIMCO Edit 2025.01.27

Fix: Clicking on limit overtravel in simulation report didn't always go to the peak of the overtravel.

CIMCO MDC-Max 2025.01.27

New: Web Client: Made it possible to add multiple widgets at once when editing a historical dashboard.

CIMCO NC-Base 2025.01.27

Fix: Fixed issue with prgfield4 not being able to be used as a predefined field when family of parts is enabled.

CIMCO Software 2025.01.26 Released: 07-01-26

Changes since previous version:

CIMCO Software 2025.01.26

Change: Updated MariaDB connector to use OpenSSL.

CIMCO Edit 2025.01.26

Fix: added "Treat higher feed G1 as rapid" setting to Setup->File Types->Machine page. (S23892)
Fix: Heidenhain reverse posts: CYCLE 207 feedrate.
Fix: Wrong orientation for face turning tool on turrets when mount not defined.
Fix: Fixed an issue where Editor could lose its snapped window position when brought to the foreground. (S27307)
Fix: Custom tool Orientation didn't save/load to setup sheet.
Fix: Tool path statistics shows rotary axes min/max. (S27146)
Fix: Heidenhain reverse posts: removed "Decimal character" control setting. Using "Decimal point" setting from "Machine" settings tab. (S24105)
Fix: Reverse post: variable assignment issue when it is declared using expression. (S27089)
Fix: Fanuc milling reverse post: added variables #3011, #3012, #3020, #51999.
Fix: Brother milling reverse post: added variables.
Fix: Mitsubishi milling reverse post: added variables.
Fix: Mazak milling reverse posts: added variables, G68.3, G68.4.
Fix: Reverse post: collinear axis issues.
New: Faster loading of Stock STL.
Fix: A freeze when loading certain STL as high quality stock on some AMD graphic cards.
Fix: Fanuc turning reverse posts: G32. (S27270)
Fix: Scanning not loading STL files in some locale cases.
Fix: Fagor milling reverse post: G500/501.

CIMCO DNC-Max 2025.01.26

Fix: Fixed issue with program status not being updated when replacing program.
Fix: Fixed issue with items in setup menu not consistently being disabled if not connected to a server.

CIMCO MDC-Max 2025.01.26

New: Introduced new button function to login on operator dashboard as current user.
Change: Added a filter option for 'CFGUPDATE' message in the MDC Event log. (S23766)
New: Added a search option for columns in the MDC Event Log. (S20373)

CIMCO NC-Base 2025.01.26

Fix: Fixed issues with logs and comment for certain languages.
Fix: Fixed an issue with selecting log prompt when enabling / disabling it.
Fix: Fixed file not found warning message when secure mode is enabled.
Fix: Fixed issue where you were unable to auto-create a user if a deleted user with the same name already existed in the database.
New: Web Client: It is now possible to search and view the import queue.

CIMCO Software 2025.01.25 Released: 15-12-25Register to download

Changes since previous version:

CIMCO Edit 2025.01.25

Fix: Okuma reverse posts: tool radius offset D value limit.
Fix: Reverse post: radius compensation issue causing move to X0Y0.
Fix: Heidenhain reverse posts: M130.
Fix: Crash in collision report if step size set to 0.
Fix: A responsiveness issue affecting certain key bindings.
Fix: Fanuc turning reverse posts: Added arc center diameter programming control setting.
New: Machine simulation supported in web licenses.
Fix: A freeze in turning solid simulation on Intel onboard graphics.
Fix: An issue where changing stock color didn't prompt a simulation update.
Fix: A false positive shaft/workpiece collision detection.
Fix: An issue where Geometry manager properties didn't work properly when selecting one of multiple stocks.

CIMCO DNC-Max 2025.01.25

Fix: Fixed issue with pressing login when no server is running.

CIMCO MDC-Max 2025.01.25

Fix: Fixed targets for multi-bar graph.
New: Web Client: Added possibility to add shortcuts in the menu.
Fix: Corrected listing of column values in db view after changes to RT DB table.
New: Web Client: Added Search Tables as a new widget type to the Historical Dashboards.
New: Web Client: You can now add Shortcuts with URLs to the sidebar menu.
Fix: Web Client: Fixed issue causing split screens to not always work correctly with Historical Dashboards.
Fix: Web Client: A number of fixes and tweaks to the Historical Dashboards.

CIMCO NC-Base 2025.01.25

Fix: Fixed regression introduced when searching in MSSQL with subprograms enabled.
Fix: Fixed an issue where auto import and auto receive could fail when using MSSQL.
Fix: Web Client: Fixed issue when connecting to MSSQL server with instance name specified.
Fix: Added Program status updated to the prompt list.
Fix: Fixed issue with incorrect status being logged when inserting / updating sub-program list.
Fix: Fixed issue with sub programs where linking a main program to a program that is not defined as a subprogram lead to weird behavior.

CIMCO Software 2025.01.24 Released: 03-12-25Register to download

Changes since previous version:

CIMCO Edit 2025.01.24

Fix: Centroid turning reverse post: Diameter programming, U/V/W-commands.
Fix: Heidenhain reverse posts: PLANE POINTS SEQ+/- support.
New: Heidenhain GROB350 Kontec reverse post extension CYCLE 1300/1301.
Fix: Fixed an issue where Insert String on a new line before or after a match could miss some occurrences. (S27056)
Change: Fixed problem restarting the editor automatically after changing DNC-Max client settings.

CIMCO DNC-Max 2025.01.24

Fix: Fixed issues with user session logged into the editor not passing authentication to the DNCMax plugin. (S27012)
Fix: Fixed problem when updating fixed server name in the client configuration and settings are shared between all users. (S23777)

CIMCO MDC-Max 2025.01.24

Fix: Fixed issue with Email/Notification being sent to too many recipients. (S26984)
Fix: Web Client: Fixed operator dashboard not updating after input.
Fix: Fixed full-screen slide show in MDC client.

CIMCO NC-Base 2025.01.24

Fix: Fixed issue with program path resetting when infotext is edited during program add.
Fix: Fixed autoimport issues where permissions of destination folder was not applied to the imported file.

CIMCO Software 2025.01.23 Released: 27-11-25Register to download

Changes since previous version:

CIMCO Edit 2025.01.23

Fix: Reverse post: mark all linear cutting moves at rapid feedrate or higher as rapid moves. (S23892)
Fix: Fixed problem with editor shutting down during drip feed if inactivity timeout set. (S26678)
New: Faster True Vision.
New: True Vision now uses less GPU memory.
Fix: An memory leak when using True Vision on some graphics cards.
Fix: A rare crash when using stock compare.
Fix: Haas milling reverse posts: G150. (S22680)

CIMCO DNC-Max 2025.01.23

Fix: Fixed problem opening client configuration if invalid fixed server address specified.
Fix: Fixed issue with changing client protocol type in network protocol. Introduce with a SSH protocol in 2025.01.20.
Fix: Removed left over "User NC-Base logins" option from Editor DNC-Max plugin (Option was moved to the server a while ago).

CIMCO MDC-Max 2025.01.23

Fix: Fixed an issue where the MDC server could crash on the very first start after a fresh installation.
New: Web Client: Added option for historical widgets to have value axis always scale to 0-100%.

CIMCO NC-Base 2025.01.23

New: Added option to disable fuzzy matching customer names in the NC-Base import utility. (S26957)

CIMCO Software 2025.01.22 Released: 25-11-25Register to download

Changes since previous version:

CIMCO Edit 2025.01.22

Fix: Siemens turning reverse post: CYCLE92.
Fix: Reverse post: wrong rotation for Positive/Negative tilt mode in some cases.
Fix: Reverse post: radius compensation issue.
Fix: Turning reverse posts: head moving with sub-spindle in some cases.
New: Fanuc milling reverse post: Blum probing cycles. (S23776)
Change: Updated Korean simulation translations.
New: Redesigned the Bookmarks dialog with a cleaner multi-column layout, built-in filtering, and easier navigation.
New: Redesigned the Find All Search Results dialog with a cleaner multi-column layout, built-in filtering, and easier navigation.
Fix: Fixed the "Find NC Command" special search not working as intended when using Bookmark All and Find All.
Fix: Fixed an issue where Find All and Bookmark All missed results if the active document didn't contain the search string.
Change: Improved performance and responsiveness when searching, updating bookmarks, and handling large files.
Change: Improved performance of regex-based searches.
Change: "Search all" can now be used together with "Bookmark All" in the Find dialog.
Change: The "Match whole string" option is now disabled when "Use regular expression" is enabled in the Find dialog.
Fix: Standard Backplot crash in some cases.
New: Workpiece geometry can now be added from the ribbon bar.
New: Fixture geometry can now be added from the ribbon bar.
New: Added show/hide workpiece to the ribbon bar.
New: Added show/hide fixture to the ribbon bar.
Fix: An issue where a move could be missing from stock simulation output.
New: Can now toggle stock visibility in the ribbon bar.
Fix: Centroid milling reverse post: G84/184, G43.3/43.4. (S26828)
New: Haas milling reverse posts: G47.
New: Added cross section toggle to the ribbon bar.
New: .setup files now specify unit system for WCS and stock.
New: Added fusion360 native mouse mapping.
Change: Printing of multi-channel NC programs in the Editor now supports color output, respecting syntax highlighting and multi-column printer font settings. (S26459)
Change: Moved toolpath bounding box and toolpath origin dropdown items to the toolpath ribbon bar split button.
Change: Grouped show plot control and machine origin with show axis control.
Change: Removed Zoom in/out buttons from Backplot ribbon bar.
Change: Combined Zoom Window and Reset Zoom into one ribbon bar button.
Fix: A crash when clicking 'Select origin in simulation'

CIMCO DNC-Max 2025.01.22

Fix: Fixed System.log such that it doesn't add odd characters on certain locales.
New: Added an ANDON port type and template (Uses an MDC-Max port license).
Fix: Fixed issue with permissions when using an AD user assigned to an AD group.

CIMCO MDC-Max 2025.01.22

Fix: Fixed the layout issue affecting MDC Global recipients in MDC notifications.
Fix: Fixed an issue where macro values read via FOCAS as floats were shown as 0.
New: Web Client: Historical Dashboards now support setting a refresh interval through the URL.
Fix: Added the config groups to the button list for better overview.
Fix: Web Client: Show title of screen in top bar.
New: Web Client: Added option to only show historical dashboard for admins.
New: Web Client: Added chart type "Telemetry Timeline" to historical dashboards.
Fix: Fixed a crash in the MDC client when "close on button push" is enabled and the button action is set to read a job file.
Fix: Fix issue where counters in tables fail to display values for all intervals except the last (bug introduced in v2025.01.17).
Fix: Web Client: Fixed bug with remove empty interval not working for summary table.
New: Web Client: Added setting to historical dashboard to limit selection to either machine or machine group.
New: Web Client: Introduced a simple CSV export for widgets in historical dashboards.
Fix: A number of small fixes and adjustments for Historical Dashboards.
New: Added support for showing startup banner (Cfg\startupbanner.bmp).
Fix: Fixed problem setting database server name if database not connected.
Fix: Fixed issue when a thick MDC client doesn't show unresolved down-times.
New: Added support for using configuration groups for operator screen configurations.
Fix: Web Client: Fixed issue where Historical Dashboards only worked over HTTPS.
New: Added a button next to Message dropdowns that opens a searchable, sortable popup for easier message selection. (S26774)

CIMCO NC-Base 2025.01.22

Fix: Fixed a possible crash when saving very long file notes. (S26916)
New: Added a new action 'Update program status' in NC-Base Setup->Server Settings->Execute module.
Fix: Added options for prompting for comments on changed memo, setup or tool files.
New: Added new NC-Base events 'A new program imported' and 'A new program queued'. Implemented a new 'Execute' type 'Send program'. (S26711)

CIMCO Software 2025.01.21 Released: 10-11-25Register to download

Changes since previous version:

CIMCO Software 2025.01.21

Change: Added error messages when the auto-update service fails to start.

CIMCO Edit 2025.01.21

Fix: Mazak Integrex reverse post: tool length compensation issue.
New: Added goto next/prev navigation when in animation navigation mode.
Fix: Fanuc MX turning reverse post: sub-spindle support, M68/69, M168/169.
Fix: Okuma turning reverse post: added "Decimal point data" setting.
Fix: Fixed an issue where the license installation could fail when the file path contained special or non-English characters. (S19679)

CIMCO DNC-Max 2025.01.21

Fix: Fixed an issue where pressing ESC on the keyboard could cause some UI controls to disappear in the Port Configuration dialog. (S26661)
New: Added a searchable, sortable popup for Operator Message dropdowns to make finding specific messages easier. (S26601)

CIMCO MDC-Max 2025.01.21

Fix: Web Client: Better options for header font size in historical dashboards.
New: Web Client: Added pereto chart type to historical dashboards.
New: Introduced load button when creating RT-DB tables with type timeline.
Change: Updated kiosk mode when attach and detach may generate an MDC message.
Fix: Fixed crash when adding extra Condition in Job Setup.
New: Web Client: Historical Dashboards are now printable.
Fix: Fixed issue where an incorrect operator screen was displayed after a new live screen was added in the configuration.

CIMCO NC-Base 2025.01.21

Fix: The setting "Prohibit NC-Base user credentials after associating with the external user" now works.

CIMCO Software 2025.01.20 Released: 05-11-25Register to download

Changes since previous version:

CIMCO Software 2025.01.20

Fix: Fixed an issue where the auto-update process did not start after an upgrade, causing the auto-update progress dialog to remain open. (S23843)

CIMCO Edit 2025.01.20

New: Added Cutter Allowance to the presentation viewer.
Fix: Siemens reverse post: CYCLE84.
New: Added Cutter Point Shift to Parting and Grooving tools.
Fix: An issue where the last toolpath move was not always shown.
Fix: Siemens turning reverse post: CYCLE95.
New: Units added to stock and work offsets in setup file.
Fix: Reverse post: Tool path statistics crash in some cases.
New: Select and delete multiple geometries as once in the machine builder.
New: Turret tool mount STL and tool location can now be changed in the tool manager.
Fix: A collision highlight issue.
Fix: Fagor reverse post: Program header syntax (%),
Fix: Heidenhain reverse posts: PLANE RELATIV, TCH PROBE 426.
Fix: Reverse post: radius compensation in mill-turn mode.
New: Added generic machine with angle head.
New: Added Engrave using Angle Head sample for Fanuc control.
New: Angle heads can now be added to tool assemblies.

CIMCO DNC-Max 2025.01.20

New: Web Client: Expired user passwords will now prompt a password reset in the DNC-MAX and NC-Base web clients.
New: Implemented SSH protocol for data transmission (e.g. Heidenhain TNC7). (S26659)
Change: Send directory in Split window supports now $ environment variables.
Change: Added error to log when DNC-Max service can not start due to a licensing issue. (S26675)

CIMCO MDC-Max 2025.01.20

New: Web Client: Added Historical Dashboards. See documentation: https://docs.cimco.com/en/docs/mdcmax/2025/web-client/historical-dashboards/
Fix: Fixed an issue with status screens in full-screen mode where potential desktop size changes were not taken into account. (S26405)
Change: Web Client: The web client now automatically opens the operator screen when only one machine is available, without prompting the user to select it.
Fix: Configuration warning when re-opening configuration. (S26684)
Fix: Fixed an issue where the autumn time change could cause an infinite loop in Calculating.
Change: Web Client: Operator screens now display only machines assigned to the user.

CIMCO NC-Base 2025.01.20

Fix: Fixed adding weblink not prompting for reason if configured to.

CIMCO Software Manager 2025.01.20

Fix: Added log messages for when the temporary license is expired.

CIMCO Software 2025.01.19 Released: 27-10-25Register to download

Changes since previous version:

CIMCO Edit 2025.01.19

Fix: Fanuc turning reverse post: M32/33.
Fix: Fagor reverse post: M8, G51.
Fix: Heidenhain milling reverse posts: cycle 332.
Fix: Reverse post: modal subprogram variable watch list. (S26611)
Fix: Okuma milling reverse post: G605. (S26453)
Fix: An issue where holder length could get out of sync with segments.
New: Added show active plane and show current navigation to animation mode.
Fix: Reverse post: radius compensation in mill-turn mode.
Fix: A thread milling tool profile issue.
New: Now shows tool name in simulation.
Fix: Reverse post: Map letters now support escaping '=' and ',' by using \= and \,
Fix: Fagor turning reverse post: G81.
Fix: An issue where gage point incorrectly converted from inches to metric.
New: Centroid turning reverse post. (S23086)
Fix: Heidenhain reverse posts: FU command. (S26355)
Fix: Fixed an issue where the total page count in the footer was incorrect when printing File Compare windows. (S26535)

CIMCO DNC-Max 2025.01.19

Fix: Directory Monitor zip now handles special characters correctly.
Fix: Web Client: Permissions now take effect in the web client.

CIMCO MDC-Max 2025.01.19

Change: Added an information if the monitorlog queue is inaccessible due to a deadlock.
New: Added a filter to operator screens setup.
Fix: Fixed an issue where non-ASCII characters were not properly saved in the JSON HW-outputs configuration file.
Fix: Web client: Fixed issue where the header would occasionally overlap the page content in Chrome.
Fix: Fixed issue with MDC notifications sent via HTTP when they are not converted to UTF-8. MDC notifications JSON file is not properly stored in UTF-8. (S26594)
Fix: Web Client: Fixed an issue causing some Operator Screen button functions to not always work correctly in split screens.
Fix: Web Client: Fixed issue causing URL Logins to fail when the URL points to a slideshow.

CIMCO NC-Base 2025.01.19

Fix: Web Client: Fixed permissions for the NC-Base Web client.

CIMCO Software 2025.01.18 Released: 14-10-25Register to download

Changes since previous version:

CIMCO Edit 2025.01.18

Fix: Reverse post: degenerated moves.
Fix: Reverse post: Sub-spindle issues with wrong Z moves.
Fix: An issue where enabling stopping conditions while animating didn't work.
Fix: A false positive collision detection issue between tool shank and workpiece when drilling holes.
Fix: An issue where workpiece and fixture did not always highlight collisions.
Fix: Heidenhain reverse posts: incremental coordinates for CC command.
Fix: A machine builder issue where other table axes could not be added when there is a sub spindle.
Fix: Fixed an issue where the title of a Multi Channel window would go blank after opening and closing Editor Setup. (S26499)
Fix: Fixed a possible crash when running multiple Multi Channel views and then opening and closing Editor Setup. (S26499)
Fix: Fanuc milling reverse post: radius compensation number setting.
New: NC Code added to Presentation View.
Fix: Haas milling reverse posts: added rapid interpolation control setting (#335). (S26487)

CIMCO DNC-Max 2025.01.18

Fix: Changes made to user groups in "User Setup" are now correctly applied when configured from DNC-Max Server. (S(S26467))

CIMCO MDC-Max 2025.01.18

Change: Added an additional check to ensure that the correct data from archives is processed.
Change: The ExternIO Setup Sheet now uses wide layout.
Change: Delayed backdating is now applied also for message 'RECALCULATE'.
Fix: Fixed an issue when no data is found in DB View when OPERATOR / JOB / PROGRAM build-in tables are used and max records is set to 0 (no limit).
New: Kiosk mode now includes an option to change the MDC state background color on unattached screens.
Fix: Web Client: Resolved screen rendering issue after browser refresh for SSO-authenticated sessions.

CIMCO NC-Base 2025.01.18

New: Add option to automatically import AD users on first login without a prompt.

CIMCO Software 2025.01.17 Released: 06-10-25Register to download

Changes since previous version:

CIMCO Edit 2025.01.17

Fix: Fanuc turning reverse post: A-axis support.
Fix: Siemens reverse posts: G74/75.
Fix: Reverse post: tool change sequence with subspindle.
New: Turning stock no longer needs to be centered around the axis of revolution.
Fix: Fix problem where printing a Multi Channel view would not always work. (S26431)
Fix: Improved simulation robustness.
Fix: Reverse post: "map letters" not applying correctly in some cases.
Change: Tool manager: disabled non-unique number/id/description messages for libraries.
Fix: Mazak reverse posts: drill retraction feedrate.
Fix: Fanuc turning reverse posts: #5001-5003, AXNUM[X/Y/Z].
Fix: A tool compensation issue when gage point was selected as custom.
Fix: Reverse post: radius compensation. (S26416)
New: Heidenhain reverse post: subprogram file search setting.
Fix: Siemens milling reverse post: CYCLE81-83/85/86.
Fix: Fanuc reverse posts: M99P.
Fix: A cross section workpiece highlight issue.
New: Collision detection can now be enabled for base models.
Fix: Turning reverse posts: G107.
New: Added a new "Pause Synchronization" option to pause automatic synchronization of all channels in Multi Channel view, preventing windows from jumping while editing NC files.
New: Fanuc Turning Star reverse post extension: M36-38/56-58.
Fix: Reverse post: lathe cylindrical interpolation.
Fix: Reverse post: wrong retract moves after lathe threading in some cases.
New: Okuma milling reverse post: G605.
Fix: Fanuc turning reverse posts: G32 modality issue.
Fix: Centroid milling reverse post: variables.

CIMCO MDC-Max 2025.01.17

Fix: Web Client: Fixed issue where in some cases AD users without assigned groups could still logon but not access anything.
Fix: Fixed a crash in the MDC client triggered by double-clicking an entry in the DB View. (S26419)
Fix: Fixed a bug introduced in 2025.01.14 when yesterday s data was duplicated after midnight.
New: Added support for $ environment variables in notification recipients.
Change: Updated notification HTTP interface to continue iterating over all recipients even if some fail.
Fix: Fixed an issue where global recipients in MDC notifications were not working.
New: Implemented a new option when operators can be assigned to specific machines only.
New: Introduced a kiosk mode for operator screens in the thick MDC client.
Fix: Fixed a potential MDC client crash when a DB view is active and a search field name has no text.

CIMCO Software 2025.01.16 Released: 24-09-25Register to download

Changes since previous version:

CIMCO Edit 2025.01.16

Fix: Siemens reverse posts: CALL BLOCK.
New: Fanuc milling reverse post: added "Prefer Tilt" control setting.
Fix: Brother milling reverse post: added G28/G30 reference positions to control settings.
Fix: Fixed an issue where the default tool libraries included with Tool Manager could reset after restarting the Editor.
New: Added 4 axis tombstone sample file for various controls.
Fix: A crash when saving setup to a setup file with a very long path.
Fix: Stock from DXF axis.

CIMCO DNC-Max 2025.01.16

Fix: Fixed problem with login to UNC resources (introduced in 2025.01.15).

CIMCO MDC-Max 2025.01.16

Fix: Fixed problem with option preventing multiple users to access the configuration not always working. (S26369)
Change: Added a more descriptive message to the binary connector in case of an exception.

CIMCO Software 2025.01.15 Released: 17-09-25Register to download

Changes since previous version:

CIMCO Edit 2025.01.15

Change: Updates to generic machine models.
Fix: Fanuc MX turning reverse post: added "Ignore M6" and "Tool offset digits" settings.
Change: Improved simulation stability.
Fix: Siemens milling reverse post: ROT. (S26307)
Fix: Siemens turning reverse post: CYCLE93, CYCLE86.
Fix: Reverse post: lathe threading with dwell issue.
New: Collision detection option added for static head models in the machine builder.
Fix: A machine builder issue where left/right turret mount position options would not update correctly when switching between mounts.
Fix: Mazak Integrex reverse post: G28.
Fix: Reverse post: G0G80 issue.
Fix: Mitsubishi turning reverse post: G87.
New: Fanuc turning reverse post: "Tool change method" control setting.
New: Fidia milling reverse post. (S26238)
Fix: Mazak reverse posts: G66/66.1/67. (S26235)
Fix: Improved robustness of method that revolves geometries for turning.
Fix: Centroid milling reverse post: G68.1, G173-176, G181-189. (S26207)
Fix: A view plane issue when back-plotting using certain dual spindle machines.
Fix: A flicker during simulation playback with true vision active.
Fix: Slightly different gloss material rendering during true vision.
Fix: A rare deadlock when closing the simulation window.
Fix: Tool Manager: Internal threading insert crash.

CIMCO DNC-Max 2025.01.15

Fix: Fixed problem with auto receive path feature not accepting spaces. (S26280)
Fix: Fixed issue with shared NC-Base machines not being able to send each others associated files due to option that was always hidden.
Fix: Added support for pinging or resolving host name before connecting to UNC resource. (S24944)

CIMCO MDC-Max 2025.01.15

Fix: Web Client: Fixed updating of static dashboards.
Fix: Web Client: Fixed caching and config error for timelines when using same timeline on multiple dashboards.
Fix: Fixed import of tables when imported tables had wrong unique ids.
Fix: Fixed an issue in the flat file protocol related to ODBC 2018 requiring a trusted server certificate. (S26266)
Fix: Fixed issue with incorrect calculation of Rebuild progress.
Change: The RECALDAYS parameter was added to the UI.
Fix: Fixed a potential issue with an incorrect start time in Calculating.
Fix: Fixed an issue in the Modbus RTU protocol when reading discrete inputs that caused the error message 'Received incorrect amount of data'.
Change: RT DB TIMELINE tables have changed: the state name is now plain text instead of an MDC evaluator.
Fix: Fixed a potential buffer overflow issue in Haas NGC protocol.
Fix: Fixed issue where STX files were not generated at midnight when RECALCDAYS was set to more than 1 day.

CIMCO NC-Base 2025.01.15

New: Added a new CONNECTOPTIONS parameter for MSSQL with a default value ';Encrypt=yes;TrustServerCertificate=yes.'
Fix: Fixed tool list in pdf format being corrupted under certain circumstances.

CIMCO Software 2025.01.14 Released: 28-08-25Register to download

Changes since previous version:

CIMCO Software 2025.01.14

Change: Updated Chinese Simplified translations.

CIMCO Edit 2025.01.14

Fix: Mazak turning reverse post: G53.
Fix: Mazak SmoothAi reverse posts: G84. (S26148)
Fix: An machine group preview button issue in the machine configuration editor.
Fix: Okuma milling reverse post: M15/M16.
Change: Stock simulation stability improvements.
Fix: An issue where stock update did not synchronize with the toolpath slider in a specific case.
Fix: Reverse post: Incorrect simulation of tool change in some cases. (S26130)
Fix: 'Find All' now works when Use regular expression is enabled.
Fix: 'Bookmark All' now works when Use regular expression is enabled.
Fix: Fixed an issue where the window wouldn't reopen in the correct position after using Snap Layouts. (S26111)
Fix: Fixed problem starting editor after using /?.
Fix: An issue where the window title would say READ-ONLY during simulation.
Fix: Siemens turning reverse post: diameter/radius programming for arc center X value (G2/G3 I).
New: Added a 5 axis sample for Fanuc, Haas, Heidenhain, Mazak, Okuma and Siemens controls.
Fix: Machine embedded subprograms support for encrypted configurations. (S25619)

CIMCO DNC-Max 2025.01.14

New: Added support for configuring Haas Serial Monitoring within DNC-Max port configuration. (S25956)
Fix: Fixed Port Logs settings not saving correctly when changing server settings via DNCMaxServiceManager. (S26005)

CIMCO MDC-Max 2025.01.14

Fix: Fixed an issue where the MDC engine did not process archive data when the RECLACDAYS parameter was set to more than 1 day.
Fix: Focas protocol: fixed generating cyclestart when the port was started.
Fix: Fixed a potential issue when email configuration is not saved after a fresh install.
Fix: Fixed telemetry view for MSSQL database (datetime columns).
New: Added additional state info to the timeline db table.

CIMCO NC-Base 2025.01.14

Change: Reduced editor startup time when database not responding.

CIMCO Software 2025.01.13 Released: 18-08-25Register to download

Changes since previous version:

CIMCO Software 2025.01.13

Change: Updated Chinese Simplified translations.

CIMCO Edit 2025.01.13

New: Added 'jump to cut' feature.
New: Added 'color toolpath by feedrate' feature.
Fix: An issue where .CimcoSimData would not automatically be associated to open with the presentation viewer launcher.
New: Now includes tool 3D files when exporting simulation bundle support package.

CIMCO DNC-Max 2025.01.13

Fix: Fixed an issue navigating files using arrow keys in Select file to send dialog. (S26042)
Fix: Web Client: Fixed parsing of permissions.

CIMCO NC-Base 2025.01.13

Fix: Fixed missing translations in right-click context menu for text fields. (S26016)

CIMCO Software 2025.01.12 Released: 13-08-25Register to download

Changes since previous version:

CIMCO Edit 2025.01.12

Fix: A freeze after creating a new machine in the machine configuration editor when right clicking in the name field.
Fix: Intel integrated graphics loading simulation slowly and sometimes crashing.
Fix: A rotational axis false limit over-travel reporting.
New: Sub-Spindle Offset setting.
Fix: OSAI Milling reverse post: UPR command. (S25846)

CIMCO DNC-Max 2025.01.12

Fix: Web Client: Fixed issue causing the machine list scroll bar to be missing.
Fix: Fixed issue with TELNET when AUTHENTICATE command is expected even authentication is disabled.

CIMCO MDC-Max 2025.01.12

Fix: Web Client: Fixed an issue causing Active Directory SSO reauthentication to fail occasionally.
New: OPC protocol - introduced a regular expression for string custom variables.
New: Added new parameters to Focas, OPC and MTConnect protocols. (Set Feed Hold when FOVR = 0; Set FOVR = 0 when Feed Hold is active; Generate Cycle On when Feed Hold Off).

CIMCO NC-Base 2025.01.12

Fix: Fixed issue with NC-Base structure upgrade to version 8.02.07 when a new structure is already in place but version doesn't match.

CIMCO Software 2025.01.11 Released: 07-08-25Register to download

Changes since previous version:

CIMCO Edit 2025.01.11

Fix: Heidenhain reverse post: cycle 1300/1301.
Fix: "Mazak SmoothAi MillTurn" reverse post is renamed to "Mazak SmoothAi Milling with Turning".
Fix: Heidenhain reverse posts: cycle 8.0, 233, 220.
Fix: An issue where stock STL and DXF files were not included in the simulation bundle export.
New: Stock transfer and dual spindle machine simulation support.
Fix: An issue where the simulation would sometimes hang when closing and opening it again.
Fix: An issue where stock simulation would not always reset completely when going back to the beginning of the toolpath.
Fix: A rotary axis rapid interpolation issue.
New: Added ability to extract and open embedded NC programs from TRAUB WinFlex files. This setting is available in General Settings.
Fix: Haas NGC Milling reverse post: G234. (S25872)
New: Added --no-bring-to-front flag to prevent the editor from being brought to the foreground when called via command line. (S25874)
New: Optimized CimcoSimData file sizes.
Fix: An interpolation issue when in polar coordinate G12.1 mode.
Fix: An issue where a lathe drilling tool didn't cut the stock.
Fix: Fanuc STARGB reverse post extension: Y-axis diameter programming control setting, G266, G83.
New: Now shows the machine origin in machine builder.
Fix: Mazak turning reverse posts: G12.1.
Fix: An issue where false end mills / stock collisions would sometimes be detected during retract moves.
Fix: An issue where the cross section offset would reset when changing stock quality.
Fix: Tool collisions being reported twice when the machine contains a turret.
New: Added collinear axes limit checks to error reporting.
Fix: Cross section view setup is saved to configuration in Backplot mode. Removed "Remember toolpath mode between sessions" option. It is now always remembered. (S25670)
Fix: Tool manager: added "radius compensation value" parameter to milling assembly. Reverse post: supported tool radius compensation number (D). (S25610)
Fix: Siemens turning reverse post: SUPA command.
Fix: Mazak milling reverse posts: G54.4. (S25698)
Fix: A turning solid simulation issue involving certain custom grooving tools.
New: Added file type sort button.
Fix: Added "Fanuc Belotti Trim 4015" reverse post extension. (S25617)

CIMCO DNC-Max 2025.01.11

New: Introduced encryption and authentication of Telnet communication.

CIMCO MDC-Max 2025.01.11

Fix: Fixed issue in Email Settings MDC Variables when it was limited to 12 variables. (S25588)
New: Added a new check box on RT DB setup sheet to enable / disable data aligning to schedule for DB table of timeline type. (S25565)
Fix: Fixed gaps in RT DB tables after rebuild when Calculating was set to more than 1 day.
Fix: Fixed issue with hanging MDC port when backdating multiple downtime's from web client.
New: Introduced multi channels in the Fanuc Focas protocol.
Fix: Fixed partcount generating in Mitsubishi protocol after fresh start.
Fix: Fixed issue when DB tables are not evaluated if MSG[xxx] is used in OPEN / CLOSE/ LOG formula.
New: Focas protocol supports multi channel systems.

CIMCO NC-Base 2025.01.11

Fix: Web Client: Fixed issue with AD login when using multiple domain servers.
New: An option to allow multiple external users to be linked to one NC-Base user during login.

CIMCO Software 2025.01.10 Released: 16-07-25Register to download

Changes since previous version:

CIMCO Edit 2025.01.10

Fix: Improved solid collision detection robustness.
New: Mazak SmoothAi MillTurn reverse post. (S25293)
Fix: Heidenhain reverse posts: PLANE ... COORD command. (S25633)
Fix: Heidenhain reverse posts: M91 not simulated correctly in some cases. (S25656)
Fix: Fixed an issue where the Save Setup function overwrote the original .setup file after renaming an NC file, instead of creating a new one. (S25098)
Fix: Adjusted Tool Manager minimum window height to support smaller displays and high-DPI scaling. (S25645)
Fix: Okuma milling reverse post: M52-54, GRDX/GRDY, DGRDX/DGRDY, SQRX/SQRY.
Fix: Fanuc reverse posts: issue with expressions using #0 variable.
Fix: Hurco milling reverse post: added "NC mode" control setting. (S25444)
Fix: Delectron milling reverse post: G2/G3 uses I, J for center. (S25457)
Fix: Okuma reverse posts: clamp to limits is enabled by default.
Fix: Fanuc reverse posts: added "Increment system" control setting (#1004 bit 1). (S25586)
Fix: Fanuc turning reverse post: tool change issue in some cases.
Fix: Tool manager: internal threading holder head shape.
Fix: Fanuc turning reverse post: M83-85, M329. (S23489)
Fix: Siemens reverse posts: S1/S2, M1/M2.
Fix: Mazak milling reverse posts: Added F85 bit 2 to control settings. Fixed G73. (S25416)
Fix: Reverse post: Tool number parsing issue in some cases.
New: Mitsubishi turning reverse post: added "Number of tool offset digits" setting.
Fix: Hurco milling reverse post: M126-129.
Fix: Heidenhain milling reverse post: SYSWRITE.
Fix: Renamed "Heidenhain Turning" to "Heidenhain Milling with Turning".
Fix: Fanuc milling reverse post: added WKP control setting 19696 bit 5.
New: Added simulation support package export.
Fix: Reverse post: rotation angles adjustment when it is very close to machine limits.
New: Multiple stock models supported.
Fix: Reverse post: issue with wrong line numbering in some case when calling subprograms.
New: Stock from DXF files.
Fix: Haas milling reverse posts: G268XYZ.
Fix: Stock origin "Center" support in fast simulation for rectangular and cylindrical stock.
Fix: An issue where the spindle profile was not always detected correctly for solid collision detection.
New: Added support for Multi Channel templates - enabling users to save, load, and reuse custom multi channel configurations across different File Types. The installer includes a set of read-only system templates to help users get started. (S24857)
Fix: Fixed an issue where P123 did not synchronize correctly with channels 1, 2, and 3.
Fix: Fixed an issue in the Multi Channel setup where input fields using regular expressions would incorrectly trigger the syntax error indicator (icon in the top-right corner) when the regex contained a space, despite being valid.
Fix: Restored support for synchronization using channel numbers in user-defined mode when "Extract Channel from line" is enabled, matching the behaviour of the predefined mode Index-Traub.

CIMCO DNC-Max 2025.01.10

Fix: Web Client: Fixed issue with very long usernames overlapping the logout button.
New: Web Client: Added file preview to split screen send/receive.
Fix: Web Server: Can now reconnect to DNC-Max Server if there has been a network outage.
Change: Reduced server startup time.
Change: Changed remote control telnet connections to use SSL/TLS. (S24973)
Fix: Fixed socket leak when sending files using remote control application.
Fix: Fixed memory leak in client/server IPC SSL connections.
Fix: Fixed a potential crash of DNC server when alarm message read by MTConnect protocol is too long. (S24810)

CIMCO MDC-Max 2025.01.10

New: Web Client: Split screen can split vertically.
Fix: Fixed doubling $ issue in MQTT protocol.
Fix: Web Client: Fixed issue with showing text files in operator screen file preview.
Fix: Fixed issue with setting "Remove inactive machines/groups" not removing columns correctly.
Fix: Fixed wrong operator in timelines for thick client.
New: HW outputs can be imported from OEM link (Works only on server and OEMLink ini file needs to be present and OEMLink activated in the DNC ini file.).
Fix: Fixed a potential crash of MDC client when a screen with button indicators is about to open and MDC server is offline.
New: Added a new option in RT DB tables to fill in also End time when periodic update is active.
New: Individual recipients in Email notifications now support $ environment variables.
Change: Contentiously store engine period is no disabled by default (set to 0).
Fix: Web Client: Documents can now be shown from the documents folder.
New: Web Client: Added new dashboard type to embed external dashboards into MDC-Max.

CIMCO NC-Base 2025.01.10

New: Web Client: Support for photo uploads as associated files for programs.
New: Web Client: Now possible to download program files.
Fix: Updated customizable display text of 'Machine' correctly in UI.
Fix: Usernames are now ordered in the dialog when one LDAP account is linked to multiple NC-Base accounts.
Fix: Web Client: Sub-programs will now be sent from NC-Base Web Client.

CIMCO Software 2025.01.09 Released: 11-06-25Register to download

Changes since previous version:

CIMCO Edit 2025.01.09

Fix: Work origin and offsets configuration issues for turning on milling machines.
Fix: Reverse post: tool change position for lathe with turret.
Fix: Mazak milling reverse posts: G12.1/G13.1.
Fix: Okuma reverse posts: Added clamp to machine limits control settings per X/Y/Z axis. (S25380)
Fix: Toolpath statistics: tool change time setting now allows floating point numbers. (S25294)
Fix: Okuma Milling reverse post: G11, CHFR/CHFC, FMILR/FMILF, COPY/COPYE.

CIMCO DNC-Max 2025.01.09

Fix: Fixed issue where auto backup sheet always showed up when searching in settings.

CIMCO MDC-Max 2025.01.09

Fix: Fixed issue when MDC system expressions like CHANGED[JOB] didn't work for COUNTERS[xxx]. Introduced in 2024.01.34 with a fix for doubling COUNTER[xxx] when the counter is used in a TEXTVAR[xxx].
Fix: WEB Client: Fix crash of DNC-Max server when editing MDC-Max config and running web server.
Fix: Web Client: Fixed issue with timelines sometimes getting wrong data.
Fix: Fixed issue with MONONLINE status in Flat file protocol when 'Online status based on data availability' was used.
Fix: Web Client: Fixed scrollbar issue on status screens.
Fix: Web Client: Barcode/QR code input now auto-submits when "Assume barcode input" is enabled for the input field.
Fix: Fixed printing of 3d pie charts.
Fix: Fixed missing background in HTML reports sent in emails.
Fix: Fixed a customer specific database view.

CIMCO NC-Base 2025.01.09

New: Web Client: File preview can now be shown below search results.
Fix: Export to correct path.
Fix: Fixed crash when exporting dependencies.
New: New customizable display text for "Machine".
New: Web Client: Added Sub program related columns.
Fix: Web Client: Fixed clear button for search.

CIMCO Software 2025.01.08 Released: 30-05-25Register to download

Changes since previous version:

CIMCO Edit 2025.01.08

Fix: Tool manager: Internal grooving/threading tools head adjustments. (S25262)
Fix: An issue where simple math function only remembered 3 decimal points of the value.
Fix: Reverse post: issue when switching between Fanuc/Mazak and Mitsubishi turning reverse posts.

CIMCO DNC-Max 2025.01.08

Fix: Web Client: Fixed permission issue for when having NC-Base link enabled but not NC-Base logins.
Fix: Fixed issue with DNC-Max client sometimes hanging when logging in using NC-Base passwords with old passwords.

CIMCO MDC-Max 2025.01.08

Fix: Fixed crash of MDC server with active web timelines when report configuration is updated.
Change: When a table is sent in email and a time period is set to 'Selected day/week/...' it will use time period of a report in case the report is sent too.
Fix: Fixed issue in UI when overwrite column value on setup sheet 'Log Event / Timeline Settings' was not stored.
Fix: Fixed issue with charts sent as report in email. (S25275)
Fix: Fixed issue with emails sent on Schedule when sometimes the same email was sent 3 times.
Fix: Fixed MDC emails when backups were sent even if Attachment checkbox was unchecked.
Fix: Fixed issue with emails having large HTML body (HTML reports sent in emails).
Change: Added support for another HTTP methods in ExternIO like DELETE, PUT, PATCH. (S24664)

CIMCO Software 2025.01.07 Released: 27-05-25

Changes since previous version:

CIMCO Software 2025.01.07

New: Now logs in the NCBASE system log all NC-Base login and logouts through the DNC-MAX Server, DNC-MAX Client, the editor / NC-Base and MDC.

CIMCO Edit 2025.01.07

Fix: A machine configuration issue where 'spindle' could be created incorrectly in the kinematic chain.
Fix: Turning reverse post: tool orientation issue. (S23881)
Fix: Okuma milling reverse post: radius compensation issue. (S24986)
Fix: An issue where true vision would show mouse point compare value when outside stock.
Fix: Heidenhain reverse post: cycle 301. (S25064)
Fix: Delectron reverse post: G800. (S25006)
Fix: Tool Manager: Thread mill flute length validation. (S24977)
Fix: Fagor reverse posts: G36/G39.
New: True vision now supported with cross section views.
Fix: Improved simulation robustness.
New: Centroid milling reverse post. (S24838)
Fix: A possible crash in turning stock simulation.

CIMCO MDC-Max 2025.01.07

Fix: Fixed ad login issue when DNC service was running with a system account.
Fix: Added legacy techometer in the graph settings.
Fix: Fixed issue when COUNTERS were suspended during breaks even if not set for it.
Fix: Fixed issue with backdating when incorrect message in the monitor log was updated under some specific circumstances (Multiple 'Downtime start' message).

CIMCO NC-Base 2025.01.07

Fix: Fixed issue with the toolbar not being updated to reflect the current state of the settings.
Fix: Fixed issue with disabled memo, tool, and setup lists options in UI.

CIMCO Software 2025.01.06 Released: 19-05-25

Changes since previous version:

CIMCO Edit 2025.01.06

Fix: Issue with "cutter allowance" setting not converted to inches in UI.
Fix: Fagor reverse post: #RTCP. (S24897)
New: Added measure distance to the presentation viewer.
New: Can now set stock compare colors in presentation viewer.
New: Cross section dropdown in presentation viewer.
Fix: An issue where cross section origin did not start centered.
Fix: An issue where stopping conditions did not stop at a collision.
Fix: Fagor milling reverse post: tool length compensation. (S25035)
Fix: Reverse post: Lathe drilling tool with 270deg orientation.
Fix: Tool Manager: crash when updating lathe tools with zero corner radius.
New: Added stock color by tool setting to presentation viewer.
New: Added collision report to presentation viewer.
New: Can now save stock as STL in presentation viewer.
Fix: More robust zoom window.
Fix: Tool change position for turret case. Lathe drilling tool tip compensation. (S24876)
Fix: Fixed a possible crash on startup when loading a machine with an invalid configuration.
Fix: Fixed clipping of long strings when opening the 'Info variable:' dropdown in the Macro Setup dialog by widening the drop-down list to fit its contents.

CIMCO DNC-Max 2025.01.06

New: Added a new option to translate also control characters Xon/Xoff based on selected port mode (transfer coding). (S24747)

CIMCO MDC-Max 2025.01.06

Fix: Fixed issue when Patlite device with Buzzer enabled caused DNC server to crash. (S24901)
Fix: Fixed Issue with MDC email UI when a new email set couldn't be inserted if the email set list is empty. (S25075)
Fix: MDC Event Log do now log web client as source.
Fix: Fixed DB View Excel export not appending data to excel template.
New: Web Client: Timelines do now recalculate after backdating.
Fix: Correct column format when having table under graph.

CIMCO NC-Base 2025.01.06

Fix: Fixed broken customer folders when projects were disabled.
Fix: Fixed issues with file ownership of temporary files, causing issues with denied access to files in the import queue.
Fix: Fixed issue with MSSQL passwords containing '}' not being able to connect.

CIMCO Software 2025.01.05 Released: 06-05-25Register to download

Changes since previous version:

CIMCO Edit 2025.01.05

Fix: Small scar like stock corruption on certain 5 axis simultaneous moves when using accurate zoom far zoomed in.
Fix: Small black dots when using true vision with certain drilling toolpaths.
Change: Updated macros and associated diagrams in Haas Milling and Haas Turning file type templates.
Change: Updated Program Start and Header diagrams in Fagor, Fanuc, Heidenhain, and Siemens file type templates.
Fix: Corrected multiple typos in macro descriptions across several templates.
Fix: Fixed broken newline characters in the macros of Fagor Milling and Flexium_M00040EN-00_NUM file type templates.

CIMCO DNC-Max 2025.01.05

Fix: Don't update port list on login if Only Show Allowed ports is not enabled.

CIMCO MDC-Max 2025.01.05

New: Added mandatory option for multi-input field on operator screen.

CIMCO Software 2025.01.04 Released: 05-05-25Register to download

Changes since previous version:

CIMCO Edit 2025.01.04

New: Added animation mode and view commands to presentation viewer.
New: Faster stock animation for turning programs.
Fix: Fixed an occasional zoom window issue when stock is from STL.
Fix: Improved simulation robustness of stock from STL.
Fix: An issue where it was not possible to hide the tool holder in machine simulation when mounted on a turret.
Fix: Fixed an issue where the '--line' command-line argument didn't jump to line in already opened files.
Fix: Fixed problems with M32 and M+ files in Mazatrol Viewer.
Fix: Fanuc turning reverse post: drilling time issue.

CIMCO DNC-Max 2025.01.04

Fix: Fixed issue detecting when using NC-Base logins, resulting in network busy errors.
Fix: Fixed issue with logins for DNC-Max client if launched from server.

CIMCO MDC-Max 2025.01.04

Change: Web Client: Now possible to associate a timeline with backdating screen.
New: Bar charts can now use user defined colors in the web client.

CIMCO NC-Base 2025.01.04

New: It is now possible to search for specific programs using URL search parameters.

CIMCO Software 2025.01.03 Released: 24-04-25Register to download

Changes since previous version:

CIMCO Edit 2025.01.03

Fix: Heidenhain reverse post: CYCL DEF 301. (S24354)
Fix: Heidenhain reverse post: TRANS DATUM AXIS.
Fix: Okuma turning reverse post: block skips.
Fix: A crash that would sometimes happen when changing stock STL.
Fix: An arc interpolation issue during toolpath playback.
Fix: A linearization issue for full circle arcs.
Fix: Siemens reverse posts: Added support for $P_TOOLL, $MA_POS_LIMIT_MINUS, $MA_POS_LIMIT_PLUS variables. (S23648)

CIMCO DNC-Max 2025.01.03

Fix: Fixed a potential hang of DNC server in case of an error in live update of database during DNC server start up.
New: Added a new MDC port type that doesn't consume a DNC license but only an MDC license. MDC license is consumed on any port only if MDC protocols are enabled.

CIMCO MDC-Max 2025.01.03

Fix: Fixed issue with missing machine labels on timeline report sent in email. (S24806)
Fix: Fixed upgrade of MDC-Max Client configuration from older versions. (S24728)
New: Web Client: Added a downtime timeline to the backdating screen.
Fix: Fixed issue causing empty default strings in web client when importing CSV translations.
Change: Updated Archiving to handle a case when data is not consistently written in archive (DAT file).

CIMCO NC-Base 2025.01.03

Fix: Web Client: Machine groups in search dropdown are now in alphabetical order.

CIMCO Software 2025.01.02 Released: 14-04-25Register to download

Changes since previous version:

CIMCO Edit 2025.01.02

Fix: Tool manager: Added taper angle parameter to thread mill. (S24528)
Fix: Fanuc turning reverse posts: G71.

CIMCO DNC-Max 2025.01.02

Fix: Fixed issue of duplication of file that sometimes occurred when merging received programs for Fanuc Focas.
New: Web Client: Added a filename filter in the file explorer for send/receive operations.
Fix: Fixed issue when DNC was unable to delete a directory content with more than 65 535 items.

CIMCO MDC-Max 2025.01.02

Fix: Fixed crash of MDC client when editing TEXTVARs. (S24745)
Fix: Fixed issue when Copying a Global Recipient does not include the Notification selections. (S24673)
Fix: Web Client: Added operator dashboard button type "Send values from all input fields by one message".
Change: Updated generation of reports when variables like PROGRAM / JOB / MACHINE are processed only when they are checked (Include information check box or Process checkbox) in report setup.

CIMCO Software 2025.01.01 Released: 10-04-25Register to download

Changes since previous version:

CIMCO Edit 2025.01.01

New: Fagor milling reverse post.

CIMCO DNC-Max 2025.01.01

Change: User is now logged out when server connection is lost.
Fix: Fixed authentication failure resulting in Network Busy error in several scenarios.
New: Removed NC-Base login option from DNC Client, now the client will use NC-Base logins if the option is selected on the server.
Fix: Fixed user permissions and they now allow for individual permission selection.
New: Added new client config user permission.
New: Added machine sheet to DNC-Max config to allow better configuration of user permissions.

CIMCO MDC-Max 2025.01.01

Fix: Add versioning to MDC client and server to enforce compatibility.

CIMCO NC-Base 2025.01.01

Change: Changed 'User can view unapproved programs' permission to 'User can only view approved programs', thus inverting the permission.