CIMCO Software 2026 Releases

CIMCO Software 2026.01.11 PreviewReleased: 03-06-26Register to download
Changes since previous version:
CIMCO Edit 2026.01.11
  • Fix: Better robustness on Intel Integrated Graphics.
  • Fix: An issue where turret mounts would not load.
  • Fix: Reverse post: spindle axis center issue in machine coordinates.
  • Fix: Heidenhain reverse posts: wrong rotation axis movements in some cases.
  • New: Reverse post: parametrized machine subprogram macros. (S29004)
  • New: Improved stock compare performance.
  • Fix: True vision rendering stale image during animation playback.
  • Fix: Sharpened shaft/shoulder stock collision margins.
  • New: Support updated web license.
  • Fix: Siemens reverse posts: $P_ACTFRAME. (S27059)
  • Fix: Siemens reverse posts: $P_UIFR.
  • Fix: Fanuc milling reverse post: rotated work offsets G10, G30.
  • Fix: Save Setup not commenting Version Number when writing to top of NC file.
  • Fix: Fanuc/Mazak milling reverse posts: G68.4.
  • Fix: Fanuc milling reverse post: G82 dwell time.
  • Fix: Mazak and Fanuc milling reverse posts: system variables #7001-7941.
  • New: Support threading tools with low corner radius and point corners.
  • Fix: Siemens milling reverse post: G_BACK_TUNNEL.
CIMCO DNC-Max 2026.01.11
  • Fix: Fixed OPC UA monitoring by updating OPC and resolving dependency conflicts.
  • Fix: Fixed issues with receive translators being applied to compressed files resulting in corrupt files.
  • Change: Changed default value of "Show only ports allowed by NCBase" to be consistent across DNC-Max Admin & CIMCO Editor DNC-Max Admin plugin (defaults to false now).
CIMCO MDC-Max 2026.01.11
  • Fix: Web Client: Fixed issue with showing individual OEE Gauges in the historical dashboards.
  • Fix: Web Client: Fixed issue causing live screen translations to not always load correctly.
  • Fix: Fixed issue in the Heidenhain protocol where PLC data paths of type boolean returned the strings "True" and "False" instead of the expected values 1 and 0. (S29135)
  • Fix: Fixed issue when automatically generated reports use incorrect locale settings.
CIMCO Software 2026.01.10 PreviewReleased: 27-05-26
Changes since previous version:
CIMCO Edit 2026.01.10
  • Fix: Fanuc milling reverse post: G68.4.
CIMCO DNC-Max 2026.01.10
  • Fix: Fixed issue with protocol ports in combination with MDC protocol not being licensed.
CIMCO Software 2026.01.09 PreviewReleased: 26-05-26
Changes since previous version:
CIMCO Edit 2026.01.09
  • Fix: An issue where default tool colors would be black instead of following color loop.
  • Fix: Reverse post: wrong incremental move after angular move in turning.
  • Fix: Reverse post: repeating macro program calls in some cases.
  • New: Remembers stock compare gradient setting.
  • New: Remembers True Vision.
  • New: Added simulation shortcut for going to end (Ctrl + Shift + Space).
  • New: Added simulation shortcut for playing / pausing (Ctrl + Shift + R).
  • Fix: Reverse post: inverse kinematics issue when using spindle axis.
  • Fix: Heidenhain reverse posts: issue with ignoring some cycle parameters in some cases.
  • Fix: Consistent milling tool orientation in milling and mill-turn environment. (S28130)
  • Fix: Siemens milling reverse post: POCKET2.
CIMCO DNC-Max 2026.01.09
  • Fix: Fixed issue with the Serial Haas monitor protocol where it stopped working after a program was sent to the machine.
  • Fix: Web Client: Fixed permission issue for showing server files in send / split window.
CIMCO MDC-Max 2026.01.09
  • Change: It is now possible to select a schedule when generating an HTML report by showing the extended options. (S28593)
  • Fix: Web Client: Fixed behavior for OEE Gauge in Historical Dashboards.
  • Fix: Web Client: Fixed an authentication timing issue that prevented Historical Dashboards from displaying.
  • Change: Dialog info box displayed on the operator panel uses the same font as the values shown on the operator panel.
  • New: Added an option to switch to a sub-screen based on the active state. (S28940)
CIMCO NC-Base 2026.01.09
  • Fix: Fixed issue where "Leave original when moving files" didn't apply in certain cases.
CIMCO Software Manager 2026.01.09
  • Fix: Fixed a potential crash in the Software Manager when the keyfile path contained non-ASCII/UTF-8 characters.
CIMCO Software 2026.01.08 PreviewReleased: 19-05-26
Changes since previous version:
CIMCO Software 2026.01.08
  • Fix: Fixed issues with running multiple license servers on the same network.
  • Change: Updated French translations in Tool Manager.
CIMCO Edit 2026.01.08
  • Fix: Okuma reverse posts: OO88.
  • Fix: Fanuc reverse posts: G50.1, G51.1.
  • Fix: Reverse post: wrong entity by line number in some cases when using external subprograms.
  • Fix: A circumstantial freeze when closing Backplot.
  • New: Tweaked cursor when resizing sub program HUD.
  • Fix: Corrupt sub program HUD when Editing main program.
  • Fix: Visibility state not being remembered when toggling geometries from ribbon bar.
  • New: Reverse post: manual tool change position. (S28846)
  • Fix: Siemens reverse posts: added R1000-R1299 variables.
  • Fix: Reverse post: angular move issue in turning.
  • Fix: Siemens reverse posts: MSG command not outputs message into simulation window. (S28577)
  • Fix: Crash in remove chips.
  • Fix: Collision detection not refreshing after changing tool/workpiece setting.
  • Fix: Stock simulation when turning on an AC 5 axis milling machine.
  • Fix: Centroid reverse posts: conditional expressions. (S26828)
  • Fix: NC line highlight sometimes on wrong line when jumping to tool changes.
  • Fix: Siemens milling reverse post: CYCLE800 retract position.
CIMCO DNC-Max 2026.01.08
  • Fix: Fixed issues with DNC-Max Server not recognizing new port types when adding ports.
  • Fix: Added support for FEED Hold signal in RS232 protocol.
  • Change: Improved Haas Serial Monitor to parse monitoring messages. Added MONITORPREFIX=\\CR\\LF\\STX and MONITORSUFFIX=\\ETB in mch file in [HAASMONITOR] section.
  • Fix: Fixed wrong client count at the bottom bar of DNC-Max server application.
  • Fix: Fixed issue with mdc port license granting at start up.
  • Fix: Fixed default send directory issues for SSH protocol & CIMCO Windows Agent.
  • Fix: Web Client: Added modified date to send window.
  • New: Added official support for Microsoft Entra ID as a login module.
CIMCO MDC-Max 2026.01.08
  • Fix: Fixed issue where reports were generated with incorrect tables/graphs.
  • Change: Updated MDC notification log time in the database table to match the actual notification trigger time.
  • Fix: Fixed issue with the advanced filter in the Heidenhain protocol where control modes were not properly evaluated and message variables 1–3 were not working.
  • New: Added an option to enable or disable TLS for MariaDB connections on the operator screen in the button function used for reading job data from the database.
  • Change: Updated MSSQL connectors to trust DB serve certificate.
  • Fix: Fixed issue in Modbus protocol where debug messages were sometimes not populated.
  • Fix: Fixed issue where making a copy of the selected operator screen copied the last operator screen from the list instead. (S28656)
  • New: Added an On-Screen Numeric Keypad for operator screens.
  • Fix: Fixed an issue where the input field on the Operator screen could lose focus.
  • Fix: Fixed wrong title in Setup UI for Switches.
  • Change: Updated Excel export so that Microsoft Excel is no longer required on the server.
  • New: Advanced filter extended about M00, M01, M30 instructions.
  • New: Added official support for Microsoft Entra ID as a login module.
CIMCO NC-Base 2026.01.08
  • Fix: Fixed issue where users were not saved after a fresh install until the DNC server was started.
  • New: Added official support for Microsoft Entra ID as a login module.
CIMCO Software Manager 2026.01.08
  • Fix: Fixed several issues related to stability and error handling & NC-Base web clients now correctly consume a NC-Base client license instead of a DNC-Max client license.
CIMCO Software 2026.01.07 PreviewReleased: 06-05-26Register to download
Changes since previous version:
CIMCO Edit 2026.01.07
  • Fix: Centroid milling RPost: M25.
  • Fix: Siemens turning reverse post: SUPA, G53.
  • Fix: An issue where stopping conditions could would rewind/stop at before the initial play position.
  • Fix: Presentation viewer initially highlighting line 1.
  • Fix: Collision detection progress bar sometimes appearing when it shouldn't.
  • Fix: Centroid reverse posts: added #29000-31999 variables.
  • Fix: An issue where changing theme corrupted stock compare colors.
  • New: Millplus milling reverse post. (S23277)
  • New: New real-time based simulation animation speed slider.
  • Fix: Tool manager: Thread mill shape.
  • Fix: Reverse post: wrong tool rotation angles in some cases.
  • Fix: Reverse post: crash in radius compensation in some cases.
  • Fix: Black screenshot in simulation bundles.
  • New: Added gage point to custom lathe holders.
  • Fix: Fagor reverse posts: #MCS ON/OFF.
  • Fix: Heidenhain reverse posts: CYCL DEF 19.
  • Fix: Fanuc milling reverse post: system variables #2000-2399, #10001-10999, #11001-#11999, #13001-13999.
  • Fix: Arc interpolation regression.
  • Fix: Stock removal when turning with C180.
  • Fix: Fanuc turning reverse posts: #3000.
  • Fix: Fanuc turning reverse post: linear angle issue.
CIMCO MDC-Max 2026.01.07
  • Fix: Fixed issue with opening mdc config on fresh install before DNC server has been started.
  • Fix: Fixed issue with reconnecting custom data paths in the Heidenhain protocol after the CNC connection was lost.
  • Fix: Fixed issue with NCBaseUpgrade causing rebuild errors in MDC-Max.
  • New: Web Client: When opening an operator screen, the first barcode input field will now be automatically focused.
  • New: Web Client: Added OEE Widget and data transformation to the historical dashboard.
  • Fix: Web Client: Restricting access to the subscreen in the operator screen will now block access.
CIMCO NC-Base 2026.01.07
  • Fix: Fixed issue saving editor file type.
CIMCO Software 2026.01.06 PreviewReleased: 29-04-26Register to download
Changes since previous version:
CIMCO Edit 2026.01.06
  • Fix: Reverse post: macro programs issue.
  • Fix: Fanuc turning reverse post: drilling cycle R parameter is absolute/incremental depending on G90/G91 activated. (S28324)
  • Fix: Mazak milling reverse post: Tool length compensation activation control setting. (S28398)
  • Fix: An issue where special characters in tool comments and files names were sometimes corrupted.
  • New: Added turning sample file demonstrating stock flip and split stock.
CIMCO DNC-Max 2026.01.06
  • Fix: Fixed issues with being able to start ports without license if they were high in the port list.
  • Fix: Fixed issue introduced in 2026.01.03/04 regarding license counting.
CIMCO MDC-Max 2026.01.06
  • Fix: Web Client: Fixed issue where the MDC-Max web client was unable to start when the Historical Dashboard config was empty.
  • Fix: Fixed an issue with HTML report settings where the UI behaved incorrectly.
CIMCO NC-Base 2026.01.06
  • New: Web Client: Added custom search in code preview (Ctrl+F).
CIMCO Software 2026.01.05 PreviewReleased: 27-04-26Register to download
Changes since previous version:
CIMCO Edit 2026.01.05
  • Fix: Mazak SmoothAi reverse posts: M98H.
  • Fix: Siemens milling reverse post: OFFN.
  • Fix: Fanuc turning reverse posts: missing variables.
  • Fix: Reverse post: radius compensation issue in mill-turn.
  • Fix: Heidenhain reverse posts: PLANE RESET STAY.
CIMCO DNC-Max 2026.01.05
  • Fix: Web Client: Fixed issue with showing wrong folder in split window.
CIMCO MDC-Max 2026.01.05
  • Fix: Web Client: Button indicators on the operator screen now works when a button is disabled.
CIMCO NC-Base 2026.01.05
  • Fix: Fixed broken add new editor file type button under Machines > Templates & fixed saving issues of the file type.
CIMCO Software 2026.01.04 PreviewReleased: 23-04-26Register to download
Changes since previous version:
CIMCO Edit 2026.01.04
  • Fix: Reverse post: spiral and conical arcs issue.
  • Fix: Mazak reverse posts: #3020 variable.
  • Fix: Fanuc turning reverse post: G73.
  • Fix: Fanuc milling reverse post: WCS Expansion option.
  • Fix: Legacy APT reverse post: MULTAX.
  • New: Collision detection between machine models and in-process stock.
  • Fix: Heidenhain reverse post: PLANE RESET TURN.
  • Fix: Siemens reverse posts: $P_TOOLL.
  • Fix: Heidenhain reverse posts: cycle 17.0 feed rate issue.
CIMCO DNC-Max 2026.01.04
  • Fix: Fixed an issue where DNC-Max Client would not restore to previous window size and position on open. (S27792)
  • Change: Implemented a rename function in the split window for Windows Agent.
  • Fix: Fixed an issue where the Windows Agent copied a program with an empty file name when sending was initiated from NC-Base with file extension renaming enabled.
  • Fix: Fixed an issue where sending via CIMCO Windows Agent initiated by NC-Base ended up with an error.
  • New: Web Client: Browsing of additional directories in send/split window is now possible.
  • New: Web Client: Added delete button to DNC split screen.
  • Fix: Fixed issue with infinite loop of port directory update.
CIMCO MDC-Max 2026.01.04
  • Fix: Fixed not working telemetry data lifetime.
CIMCO NC-Base 2026.01.04
  • New: Web Client: Now possible to upload program to auto import folder.
  • New: Added a new NC Event 'PROGRAM_UPDATED' in the Execute module.
  • Fix: Fixed an issue with MSSQL where the Execute module setup could not be saved.
CIMCO Software 2026.01.03 PreviewReleased: 16-04-26Register to download
Changes since previous version:
CIMCO Software 2026.01.03
  • Change: Updated Portuguese translations.
CIMCO Edit 2026.01.03
  • Fix: Fixed unlocalized file type template names in 'Add new file type' dialog. (S28405)
  • Fix: Fanuc Turning STARGB reverse post extension: G910, G69.1.
  • Fix: Missing control settings localization in Haas and Mitsubishi turning reverse posts. (S28236)
  • Fix: Reverse post: G10L2P0.
  • Fix: Fanuc turning reverse posts: drilling axis issue. (S28324)
  • Fix: File open dialog for DXF shows "Open STL File"
  • Fix: Reverse post: cylindrical interpolation regression.
  • Fix: Spindle to stock collision reporting issue when the spindle model was in inches.
  • Fix: False positive stock/holder collisions when turning on stock STL.
  • New: Added Clamp/unclamp time settings.
  • New: Advanced Chuck Jaw setup.
  • Fix: Okuma milling reverse post: G283/284.
  • Fix: Siemens turning reverse post: TRANSMIT_S.
  • Fix: Siemens reverse posts: G500 fix caused regression.
  • Fix: Better simulation robustness on Intel Integrated Graphics.
  • Fix: Stock compare update when changing workpiece.
  • Fix: Collision detection issues when multiple workpieces or fixtures.
  • Fix: Issue where hiding workpiece could pause simulation.
  • Fix: Toolpath vectors only showing for half the toolpath.
  • Fix: A circumstantial freeze when closing Backplot.
  • Fix: Reverse post: diameter programming issue for variables.
  • Fix: Centroid milling reverse post: M98, M25.
  • Fix: Centroid reverse post: system variables support. (S26828)
  • Fix: Machine configuration.
  • New: Statistics can show graph for selected tools. (S27148)
  • New: Default view can now be changed in the machine configuration editor.
  • New: Now bundles external sub programs in simulation bundles.
  • New: Support vertical milling extenders.
CIMCO DNC-Max 2026.01.03
  • Fix: Fixed potential crashes from clicking links in log.
  • New: Added support for Windows 95 in the CIMCO Windows Agent.
CIMCO MDC-Max 2026.01.03
  • Fix: MTConnect updated alarms.
  • New: Added message variable to the advanced filter.
  • Change: Updated Haas Serial Monitor to Generate MONONLINE / MONOFFLINE when machine doesn't respond in a given time (command time out).
  • New: MTConnect: added option to calculate SOVR from cmd spindle speed and actual spindle speed.
CIMCO NC-Base 2026.01.03
  • Change: Added option to revert NC program status to "Run-In".
  • Fix: Web Client: Fixed an issue with file preview that caused certain text files to load incorrectly.
  • Fix: Web client: Fixed issue with file transfer when running a MSSQL Server.
CIMCO Software 2026.01.02 PreviewReleased: 23-03-26Register to download
Changes since previous version:
CIMCO Edit 2026.01.02
  • Fix: Mazak milling reverse posts: G68, G68.2.
  • Fix: Siemens reverse posts: D+SUPA command issue.
  • New: Add Keep decimals, Strip leading zeros and Strip trailing zeros options to Adjust Feedrate and Adjust Spindle Speed dialogs. (S27518)
  • Fix: Reverse post: home position units issue.
  • Fix: Stock simulation issue when C not zero.
  • Fix: arc scanning issue.
  • Fix: An issue where 'remove chips' sometimes removed the wrong piece.
  • New: Tool visibility state is now remembered.
  • Fix: Remove chips sometimes removing too much material after parting off.
  • Fix: Tool mounts missing in simulation bundles.
  • Fix: False positive collisions in turning.
  • Fix: An issue where going to end would not always update stock.
  • New: Memory optimizations.
  • New: Better STL repair for stock compare.
  • Fix: Haas milling reverse post: P9817/9818.
  • Fix: Okuma milling reverse post: VRSTT, VZOF*, fixed issue with labels.
  • Fix: Loading of stock from STL when paths contain Chinese characters.
  • Fix: Multi Channel: Fixed an issue where the configured Channel Order was not always preserved. (S28040)
  • Fix: Siemens milling reverse post: G500.
  • Fix: Mazak Integrex reverse post: M211.
  • Fix: Siemens turning reverse post: CYCLE800. (S28020)
  • Fix: Turning when work origin not on rotation axis.
  • Fix: Orientation of turning tools when turning on horizontal mills.
  • New: Automatically selects the Backplot tab when launching directly into simulation from CAM integrations.
  • Fix: Centroid milling reverse post: G43.3, G43.4 display tool position issue. (S26828)
  • Fix: Machine home position when in inches.
  • Fix: Corrupt stock when using remove chips with stock compare.
  • Fix: Reverse post: radius compensation issue.
  • Fix: NC code missing from .CimcoSimData when exporting simulation bundle.
  • New: Improved stock model collision detection.
  • Fix: Heidenhain reverse posts: M130.
CIMCO DNC-Max 2026.01.02
  • New: Added check of validity of key & cert to startup of webserver.
  • Change: Updated error handling of program receive over FOCAS.
  • Change: Moved WEB API & Startup banner to Server Config -> Advanced setup sheet.
  • Change: Added additional translations to the DNC-Max web client.
  • Change: Updated web server command-line parameters to ensure a default connection is always available.
  • Change: Moved settings "Allow users to re-start ports" and "Allow users to send 'Local Files'" from the clients to the server.
CIMCO MDC-Max 2026.01.02
  • Fix: Web Client: Added multiselect capabilities to the downtime list for bulk resolving downtimes.
  • Fix: Implemented missing feature 'Value store mode' for variables job and program. (S28058)
  • Fix: Fixed issue with counters and timers not being correct in rolling timelines.
  • Fix: Web Client: Fixed an issue causing screens to sometimes not load correctly on page reload.
  • Fix: Fixed an issue when TEXT[EXCELVARx] didn't work in a text comparison condition e.g.: TEXT[JOB]<>TEXT[EXCELVAR1]. (S22730)
  • Fix: Fixed an issue where MDC expressions related to schedule (TIME[ISHIFTSTART], TIME[ISHIFTEND], TIME[SHIFTSTART], ...) did not work correctly.
  • Change: Added additional translations to the MDC-Max web client.
CIMCO NC-Base 2026.01.02
  • Fix: Fixed MariaDB 11.8.5 startup issue on Windows Server 2016 by including required ICU DLLs in the installation. (S28095)
  • New: Added new option 'Don't allow programs to be overwritten when 'Approved'.
CIMCO Software 2026.01.01 PreviewReleased: 09-03-26Register to download
Changes since previous version:
CIMCO Edit 2026.01.01
  • Fix: Spindle mount collision detection.
  • Fix: Spindle mount scaling when in inches.
  • Fix: Fanuc milling reverse post: G68.
  • New: Command line (--savebundle path) for saving simulation bundle.
  • Fix: Reverse post: fixed not updating some of linked variables.
  • Fix: An issue where jumping to limit over-travel would highlight NC line 0.
  • Fix: Remove chips when on sub spindle.
  • Fix: Default mounting on cross turning tools with round shank.
  • Fix: Tool colors setting not loading correctly when starting CIMCO Edit.
CIMCO DNC-Max 2026.01.01
  • Fix: Added Additional Directories for Network Monitor Ports.
  • Fix: Fixed Fanuc focas1 send function.
  • Fix: Fixed issue with drip-feeding when Dripfeed file resume is enabled. (S27790)
  • Fix: Web Client: User logins are now added to the NC-Base system log for all web client types.
  • Fix: Web Client: Fixed issue causing web clients to not correctly detect mobile layouts.
  • New: Web Client: Split screen will now show "Date Modified" for files.
  • Fix: Update Telnet SSL communication loop to better handle SSL handshake.
  • Fix: Multihead machines (Fanuc Focas) which utilize extensions to determine sending directories now consider upper- and lower-case versions of extensions to be the same.
  • Fix: Fixed SSH protocol when working with non-ASCII file names.
  • New: Web Client: Added machine log to split screen.
  • New: Web Client: It is now possible to sort files by name or modified date in split screen.
  • New: Web Client: Added search filter to split screen.
  • New: Web Client: It is now possible to rename files from the split screen.
CIMCO MDC-Max 2026.01.01
  • Fix: Web Client: Auto scroll will now scroll to top of page if only one slide is in slideshow.
  • New: Web Client: Added indicator on historical widget when an evaluation has failed.
  • Fix: Web Client: Added status information to the shopfloor and made font sizes more dynamic. Font sizes can now be overwritten.
  • Fix: Fixed hang when editing schedule configuration. (S27762)
  • Fix: It is now possible to auto close a sub-screen in the web client when an input field is submitted.
  • Fix: Correctly log user logout when the client is closed.
  • Change: Added UI option to configure connection and response timeouts for the SMTP notification interface.
  • New: Web Client: Added dynamic zoom to timelines in historical dashboards.
  • New: Web Client: Added legend to shopfloor.
  • Change: Updated Heidenhain protocol to support a secure connection.
  • New: Web Client: Added drilldown functionality to charts in Historical Dashboards.
  • New: It is now possible to configure schedules to start on Sunday.
  • New: Web Client: Value widgets in Historical Dashboards can now have color ranges.
CIMCO NC-Base 2026.01.01
  • Fix: Fixed an issue with "Leave copy of program file" option being greyed out when adding a new program.
  • Fix: Fixed issue with blank string in field folders drop down menu.
  • Fix: Correctly log user logout in NC-Base when the editor is closed.
  • Fix: Fixed a rare crash when viewing files with extremely long paths and containing '.' as part of the name (other than the .ext).
  • Fix: Updated database field partnumber from VARCHAR 100 -> text.
  • New: Web Client: Users can now print text and image files directly.
  • New: Web Client: Added zoom to the image preview via mouse or touch gestures.
  • Fix: Allow 'Part number' to have a max length up to 256 instead of 100.
  • Fix: Fixed an issue that caused program file extensions in some cases to be doubled.
  • Change: Updated MariaDB to version 11.8.5.
  • New: Added preview of Office documents (Word, Excel, PowerPoint).