CIMCO Software 2026 Sorties

CIMCO Software 2026.01.24 PreviewLibéré: 12-10-26Register to download
Modifications depuis la version précédente :
CIMCO Edit 2026.01.24
  • Fix: Siemens milling reverse posts: SLOT1/2, HOLES1/2, LONGHOLE, CYCLE801.
  • Fix: Delectron milling reverse post: G801/802.
  • Fix: Fixed an issue where General Out LINE (C-SP) values in Mazatrol programs were displayed incorrectly.
  • Fix: Fanuc milling reverse post: G73/83.
  • Fix: Haas reverse posts: P in front of M98. (S30181)
  • Fix: Siemens reverse posts: parametrized subprograms support. (S30325)
  • Fix: Reverse post: G85-89's feed and dwell issues.
  • Fix: Heidenhain reverse posts: datum shift. (S30426)
  • Fix: Reverse post: issue when switching between milling and turning modes.
  • Fix: DNC Transmit Default rebuilt the CR/LF list with CR and LF swapped.
  • Fix: Next/Previous Tool change took M60/M61 for an M6 tool change.
  • Fix: DNC Transmit Default swapped CR and LF.
  • Fix: DNC Receive Default swapped ASCII 0 and All below ASCII 32.
  • Fix: DNC templates used DTS_ENABLED instead of DTR_ENABLED.
  • Fix: F8 did not run Modify Macro.
  • Fix: Renumber Start from line/Skip removed the block skip.
  • Fix: Address Adjustments showed 'From line:' above the operation.
  • Fix: Simple Math Maximum was -999999 when math values are not remembered.
  • Fix: Simple Math used Adjust Feedrate's equal/greater/less filters.
  • Fix: Next/Previous Tool change missed M6 after another M code.
  • Fix: Remove String address mode missed an address left at line start.
  • Fix: Insert String used wrong position for 2nd match on a line.
  • Fix: Brother milling reverse post: G77/78.
  • Fix: Roeders reverse post: SP.
  • Fix: Haas reverse posts: G10 parameters order. (S30185)
  • Fix: Reverse post: subprogram arguments written before their command. (S30181)
CIMCO DNC-Max 2026.01.24
  • Fix: Fixed an issue where the DNC-Max server and client windows could get stuck following the mouse or jumping off-screen after dragging the title bar, also affecting the header UI.
  • Fix: Fixed an issue where title bar and menu could be hidden when maximizing the DNC-Max server or client window on a monitor whose work area does not start at the top of the screen (e.g. taskbar at top or offset/stacked monitors).
  • New: The Telnet server can now use the web server (HTTPS) certificate instead of a generated certificate.
  • Fix: Generated HTTPS certificates are now signed with SHA-256 and use a random serial number.
  • Fix: Fixed memory leak when receiving files with target names over the Telnet link.
  • Change: Telnet link now requires TLS 1.2 or newer.
  • Fix: Telnet connections using TLS 1.2 could hang during the handshake.
  • Fix: Hardened parsing of Telnet commands against oversized input.
  • Fix: Added server version to the system log on startup.
  • New: Added the setting 'Enable MDC messaging with no MDC protocol', so a DNC port can run as an MDC port without an MDC protocol.
  • Change: 'Enable MDC protocols' now disables all MDC protocols under 'Messages' when unticked.
CIMCO MDC-Max 2026.01.24
  • New: Web Client: Added custom translations to historical dashboards.
  • Fix: Fixed an issue with live screens in the PC client introduced with the Scheduler.
  • Fix: Fixed the ping test incorrectly failing when an unrelated ICMP packet was received instead of continuing to wait for the matching echo reply.
  • Fix: Scheduler: Made part count more consistent on the running segments.
  • Fix: Updated Node.js to latest LTS version.
  • New: Added a compact transformation for Historical Dashboards.
  • Fix: MDC-Max now only starts ports whose DNC port is enabled and licensed for MDC.
  • Fix: MDC-Max can now run with a license that only contains Andon ports.
  • Fix: Andon ports now use the Andon license and only start when their DNC port is enabled.
CIMCO NC-Base 2026.01.24
  • Fix: Web Client: Fixed issue with incorrectly showing programs on the queue as the accepted version.
  • Fix: Fixed an issue where simultaneous transfers from the NC-Base client could fail or crash.
  • Fix: Fixed an issue where database client usernames and passwords could be overwritten, preventing clients from connecting to external MariaDB servers.
  • Fix: Fixed file note editor scrollbars to only appear when needed and correctly follow the current theme.
  • Fix: Fixed an issue where copying a file from the import queue to an external location could copy the wrong import queue file.
  • New: Added option to NC-Base to check DNC-Max server certificate before connecting (Off / Warn / Enforce).
CIMCO Software 2026.01.23 PreviewLibéré: 01-10-26Register to download
Modifications depuis la version précédente :
CIMCO Software 2026.01.23
  • Change: Auto-update will no longer perform an unattended restart but will notify the user instead.
  • Fix: Fixed an issue where auto-update didn't work in a Multi-License Server environment.
  • Change: Added checksum support to the CIMCO Update service.
  • Change: Added a Right-click menu option 'Copy GUID' to Machine Simulation machine licenses in License File Viewer. (S29788)
CIMCO Edit 2026.01.23
  • Fix: Roeders reverse post: SPOINT, SRAWBLOCK and other probing cycles.
  • Fix: Haas turning reverse post: tool change position, subspindle issues, added G100/101.
  • New: Rapid move tool/workpiece and hidden model collisions are now on by default.
  • Fix: MillPlus reverse post: G40.
  • Fix: Siemens milling reverse posts: G700.
  • Fix: Heidenhain reverse posts: TCPM SPAT.
  • Fix: Fanuc milling reverse post: #4130.
  • Fix: Default work offset from setup file was scaled by 25.4 in inch machines.
  • Fix: Improved file comparison performance by approximately 10-20% and increased the number of differences that can be compared before reaching the comparison limit.
  • Fix: Machine box did not follow the machine type.
  • Fix: Fagor milling reverse post: G43/44, G83.
  • New: Added 'Insert Side' to Tool Mount Properties.
  • Fix: Fagor turning reverse post: G69.
  • Fix: Double navigation bar tooltip.
  • Fix: Siemens milling reverse post: ROT, CYCLE978.
  • Fix: Reverse post: subprogram call issue.
  • New: Fanuc 0i model F milling reverse post. (S28949)
  • Fix: Fanuc turning reverse posts: G71.
  • Fix: Mazak Integrex reverse post: G12.1.
  • Fix: Haas turning reverse post: sub spindle transformation issue.
  • New: Collinear axes in the work offsets table.
  • New: Showing programmed work offsets. (S30073)
  • New: GibbsCAM keyboard/mouse mapping. (S30208)
  • Fix: Backplot crash when updating work offset rotation angles.
  • Change: Increased the maximum number of macro user input parameters from 60 to 100. (S30135)
  • New: Added an optional minimap for editor documents, configurable under Setup > General > Editor > Editor settings > 'Show minimap in editor documents'. (S29712)
  • New: Added a minimap to File Compare, enabled by default and configurable under Setup > File Compare > File compare settings > 'Show minimap'. (S29712)
  • New: Added a minimap to Multi Channel Synchronization, enabled by default and configurable under Setup > Multi Channel > Multi channel view > 'Show multi channel minimap'. (S29712)
CIMCO CNC-Calc 2026.01.23
  • Fix: Fixed issue with persisted data not always being loaded.
  • Fix: Fixed issue with post processor override text field not updating when changing machine.
CIMCO DNC-Max 2026.01.23
  • Fix: Fixed DNC client login when multiple external users are associated with the same NCBase user.
  • Fix: Fixed issue where log messages for all ports were displayed in split screen log, it now correctly only shows log messages for the specific port the split screen is open for.
  • Fix: Fixed issue where users were unable to create directories in the non split screen send window.
CIMCO MDC-Max 2026.01.23
  • Fix: Scheduler: Fixed Work order not automatically marked "Complete" after all operations are finished and the full quantity is produced when "Mark as started/stopped" is enabled.
  • Fix: Scheduler: Fixed an issue that allowed creating a new work order with the same work order number as an existing work order.
  • Fix: Fixed an issue where the MDC client used too much CPU during Calculating.
  • Fix: Fixed a potential reconnection issue in the Flat File Protocol for Windows Agent.
  • Fix: Fixed an issue where emails could be improperly received by the SMTP server due to a dependency on the locale setting, which had to be English.
  • Fix: Fixed an issue in the Flat File Protocol where the user name was not stored correctly.
  • Fix: Scheduler: Allow manual input in input fields when splitting operation segments.
  • Fix: Scheduler: Minor fixes for the UI.
  • Fix: Fixed an issue in Event Log search where newly polled events were not filtered according to the active search criteria. (S30268)
  • Fix: Scheduler: Clients will now always display time matching the servers timezone.
  • New: Web Client: Added an option for search tables in historical dashboards to match by start time, end time, or both.
  • Fix: Web Client: Fixed historical dashboard behavior when toggling all machines on or off in settings.
  • New: Added options to change execution status to FEED HOLD when ROVR = 0 (Focas, MTConnect).
  • Fix: Fixed an issue where it was not possible to enter characters in the username field for the MQTT protocol.
  • Fix: Scheduler: Fixed issues with splitting an operation segment after it has been started.
  • New: Added P-Macro reading for the Focas protocol.
  • Fix: Fixed an issue in Scheduler when running on Oracle DB.
  • Fix: Scheduler: Fixed issue causing the machine status display to occasionally go blank.
  • Fix: Web Client: Fixed historical dashboards failing to determine the start time when there is no workday on the first selected day.
  • Change: HTML reports and tables are visible in the Email configuration even when they are unchecked in the Reports configuration.
  • Fix: Fixed an issue with Warnings in the Heidenhain LSV2 protocol.
  • Fix: Added support for DBVAR[x] mapping for all 20 NCBase fields.
  • New: Haas MNET alarm modification. Introduced $ISCHANGEDxxx and $ISFLOATINGxxx expression in the port advanced filter.
CIMCO NC-Base 2026.01.23
  • New: Search fields now use dropdown selectors for predefined fields.
  • Fix: Web Client: The system log now displays the correct username when a send is initiated from the web client.
  • New: Added an option to use an external MariaDB server.
CIMCO Software 2026.01.22 PreviewLibéré: 11-09-26Register to download
Modifications depuis la version précédente :
CIMCO Software 2026.01.22
  • New: Introduced the new CIMCO Scheduler, a web-based production scheduling application available through the MDC-Max Web Client.
CIMCO Edit 2026.01.22
  • Fix: Reverse post: issue with Y-shifted tool mounts.
  • Fix: Fanuc milling reverse post: #4130.
  • Fix: Reverse post: wrong message output for selected code simulation in some cases.
  • New: Clickable view cube.
  • New: Grid-lines in Backplot.
  • New: Now uses empty holder instead of default when scanned tool doesn't contain a holder.
  • New: Now shows license info in presentation viewer status bar.
  • Fix: Station number scanning for custom tools.
  • Fix: Turning reverse posts: wrong tool cutter point in some cases.
  • Fix: Okuma milling reverse post: G272/282.
CIMCO Software 2026.01.21 PreviewLibéré: 08-09-26Register to download
Modifications depuis la version précédente :
CIMCO Edit 2026.01.21
  • New: Crisper rendering when windows scaling is 125%, 150% or 175%.
  • New: Better frame rate when windows scaling is 175% or above.
  • Fix: Turning reverse posts: wrong moves on sub-spindle when in inches.
  • New: Turning inserts can now be seen through the holders.
  • New: Crisper text rendering.
  • Fix: Now doesn't revolve the table for turning moves that position the spindle.
  • Fix: An issue where custom tool profiles with multiple adjacent arcs could corrupt stock simulation.
  • Fix: Custom tool from DXF when containing 180 degree arcs.
  • Fix: Measure distance edge and corner highlight would sometimes appear when not measuring.
  • Fix: Okuma reverse posts: MODIN, MODOUT.
  • Fix: Haas reverse posts: fixed DPRNT, POPEN, PCLOSE warnings.
  • Fix: Okuma turning reverse post: G20.
  • Fix: Fanuc milling reverse post: M29.
  • Fix: Mazak reverse posts: G84.2.
  • Fix: Turning reverse posts: wrong turret head moves at the first tool change.
  • Fix: Stock from DXF when DXF contains lwpolylines.
CIMCO DNC-Max 2026.01.21
  • Fix: Fixed a potential crash in the DNC Server setup when copying an IOLogic unit.
CIMCO MDC-Max 2026.01.21
  • Fix: Fixed an issue in the MQTT UI where deleting a parser set could remove the wrong set.
  • Fix: Fixed an issue in the MQTT protocol when the client ID was not unique.
  • Fix: Fixed a bug in the Operator real-time database table when using the CTIMEFORMAT type.
  • New: Added Windows Agent support to the Flat File protocol.
  • Fix: Fixed Focas offline timeout setting being ignored.
  • Fix: Fixed a potential issue where generating multiple email reports could result in incomplete reports. (S28428)
  • New: Added a new option to the Heidenhain COM protocol to disable the Heidenhain 'Automatic Event Interface' as a workaround for issues with buggy TNC 640 controls running software version 340590.
  • Change: Updated the Heidenhain Direct protocol to minimize machine polling.
CIMCO NC-Base 2026.01.21
  • Fix: Fixed an issue that could prevent the NC-Base service from starting after certain Windows updates. (S30164)
  • Fix: Fixed NC-Base editor saves incorrectly triggering update processing for unchanged files.
CIMCO Software 2026.01.20 PreviewLibéré: 01-09-26Register to download
Modifications depuis la version précédente :
CIMCO Edit 2026.01.20
  • New: Machines are now grouped in machine builder by 'My machines' and 'Preconfigured machines'.
  • Fix: Fanuc milling reverse post: G53.1. (S30147)
  • Fix: A crash when starting simulation reported for some users.
  • New: Measure distance now snaps to geometries, edges and corners.
  • New: Cross Section now available with only workpiece.
  • New: Cross Section can now cut through tool.
CIMCO Software 2026.01.19 PreviewLibéré: 31-08-26Register to download
Modifications depuis la version précédente :
CIMCO Edit 2026.01.19
  • Fix: Mazak reverse posts: G53.1, M107/108.
  • Fix: Editor jumps line when editing NC code.
  • Fix: An issue where cross section was off center.
  • Fix: An issue where cross section didn't always save state properly when toggling.
  • Fix: Siemens turning reverse post: TRAORI.
  • Fix: Mazak Integrex reverse post: G97R, G43.4P.
  • Fix: Fanuc milling reverse post: #999.
  • Fix: Millplus reverse post: G22, G23, G29.
  • Fix: Multiple scanned geometries using same STL but different transformations.
  • Fix: Haas reverse posts: M97, G103.
  • New: Custom lathe holder STL is now used without a profile.
  • New: Remembers work offsets in file type.
  • New: Brother milling with turning reverse post. (S28627)
  • Fix: Millplus reverse post: G74. Added home position control settings.
  • New: Show active dynamic offset.
  • Fix: Tool vs fixture collision detection in Backplot mode on lathes.
  • Fix: Y axis turning issues.
  • Fix: An issue where remove chips could remove the entire stock model.
  • New: Added Backplot, NC-assist, Multi-Channel View and Advanced Math Functions to CIMCO Edit Core.
  • New: Added collision and limit over-travel report to CIMCO Edit Pro.
  • New: Added stopping conditions to CIMCO Edit Pro.
  • New: Added collision highlight to CIMCO Edit Pro.
CIMCO DNC-Max 2026.01.19
  • Fix: Updated CIMCO Agent to handle very large files.
  • Change: Better port logging of port licenses when a port is denied.
  • Fix: Fixed issue with port licensing after applying global port change.
  • Fix: Fixed issue with global port change regarding port licenses.
  • Fix: Fixed race condition in regards to license port count.
CIMCO MDC-Max 2026.01.19
  • New: Added a HELO host name option to the Notification SMTP interface. Updated the SMTP debug log.
  • New: Added a bridge mode for the FOCAS protocol as a workaround for a bug in the FOCAS library that can cause it to hang under poor network conditions.
  • Fix: Fixed an issue in the System table view where 'Find All' was not working.
  • Fix: Fixed custom variables in the MNet protocol.
  • Fix: Changed a default location of reports to ...\AppData\... if not specified in configuration. (S29948)
CIMCO NC-Base 2026.01.19
  • New: Added options to automatically update existing memo files, tool lists, and setup sheets when a program file is saved, updated through Auto Import or Auto Receive, or accepted from the Import Queue.
  • Fix: Fixed program update processing occurring before the edited file was successfully saved.
  • New: Added new setting "Lock new programs", which locks newly created programs.
  • Fix: Fixed crash in Execute settings sheet that could occur.
  • Fix: Fixed an issue with the Oracle database upgrade to DB version 8.02.08.
  • Change: The maximum available size of program fields in NC-Base is now determined by the actual column size in the database.
CIMCO Software 2026.01.18 PreviewLibéré: 19-08-26Register to download
Modifications depuis la version précédente :
CIMCO Edit 2026.01.18
  • Fix: Fixed an issue where File Type would unexpectedly change in certain scenarios. (S30015)
  • New: Manual threading moves now supported.
  • Fix: Haas milling reverse posts: #3201-3400.
CIMCO Software 2026.01.17 PreviewLibéré: 18-08-26Register to download
Modifications depuis la version précédente :
CIMCO Edit 2026.01.17
  • Fix: Fanuc turning reverse post: added "R point programming" control setting for G81-89 of G-code system A. (S28324)
  • Fix: Haas milling reverse posts: added missing variables support.
  • Fix: Okuma milling reverse post: LAA, ARC, OMIT. (S25608)
  • Fix: Heidenhain reverse posts: SYSWRITE ID230. (S28713)
  • Fix: Fixed an issue for custom machine home position.
  • Fix: Heidenhain reverse posts: AXIS SPAT.
  • Fix: Reverse post: failing during subprogram search in some cases.
  • New: Datron milling reverse post. (S27194)
  • Fix: Siemens milling reverse posts: CYCLE72. (S28552)
  • Fix: Siemens milling reverse posts: G147/148/247/248/347/348. (S28557)
  • Fix: Heidenhain milling with turning reverse post: cycle 800.
  • Fix: Fanuc milling reverse post: G31.
  • Fix: Heidenhain reverse posts: * is used as comment only at line start.
  • Fix: Heidenhain reverse posts: TOOL CALL now accepts QS variables as tool name.
  • Fix: Siemens turning reverse post: cycle800.
  • New: Hurco turning reverse post. (S29095)
  • New: Added Off Center Turret generic lathe and 45 degree table/head machine.
  • New: Fanuc milling reverse post: arc tolerance control setting.
  • Fix: Heidenhain reverse posts: cycle 251/252.
  • New: Backplot from File now shows NC code.
  • New: Backplot active selection with live updates as you change the selection.
  • Fix: Fixed regex Find/Replace replacing next match instead of highlighted match. (S29840)
  • New: Tool path statistics: min/max spindle speed.
  • New: Tool list: extraction from tool call line.
  • New: G320 measurement cycle supported in Fanuc.
  • Fix: Reverse post: "#3000=1 (MESSAGE)" shows MESSAGE text for supported reverse posts.
  • Fix: Standardized C++ API.
  • Fix: Mazak Integrex reverse post: tool change command.
  • Fix: Okuma turning reverse post: TD.
  • Fix: OSAI milling reverse post: h. (S29796)
  • Fix: Haas reverse posts: now outputs error message when compensation input starts with an arc.
  • Fix: MillPlus reverse post: G43, G779, G781-789.
  • Fix: Reverse post: tool compensation for milling tools in mill-turn mode.
  • New: Custom turret slot orientations now supported.
  • New: Siemens ONE milling reverse post. (S24625)
  • Fix: An issue where machine builder preview didn't work when a Backplot window was open.
  • New: EControl milling reverse post.
  • Fix: Centroid milling reverse post: G43.3. (S28768)
  • Fix: Fixed an issue with syntax highlight coloring when switching between File Types. (S29792)
CIMCO CNC-Calc 2026.01.17
  • New: Option to select active post processor from bottom panel.
  • New: Enabled coordinate system axis indicators for milling. (S28930)
  • Removed: Disabled persistence for CAD function input.
  • Change: Unit scale rendering (lower right corner) changed to fixed size.
  • Change: Improved visibility for some cursors.
  • Fix: Active mouse interaction stopping when mouse leaves CAD view.
  • Fix: Dynamic layout in side panel not resizing buttons properly.
  • Fix: Artifacts in side panel when element info field are hidden.
  • Fix: Helix Milling 'Start at center' being ignored when lead in/out disabled. (S17940)
  • Change: Helix Milling cut transitioning.
  • Fix: Non-ANSI characters in file paths preventing opening files.
  • Fix: Zooming in/out scaling factors.
  • Change: Consistent window selection (zoom/selection).
CIMCO DNC-Max 2026.01.17
  • Fix: Changed the port license check when adding a new port from configured ports to active ports.
  • Change: Updated the saving of the auto-import configuration in the DNC Server Setup.
  • Fix: Fixed an issue that could corrupt the configuration in the DNC Server setup for I/O units. (S29556)
  • Change: Updated DNC service to handle SERVICE_CONTROL_PRESHUTDOWN.
  • Fix: Updated Haas serial monitor protocol to work together with DPRNT messages. (S29608)
CIMCO MDC-Max 2026.01.17
  • Change: Added an option in ExternIO to select the TLS version. By default, TLS 1.2/1.3 is negotiated automatically.
  • Fix: Web Client: Fixed issue with shopfloor font settings resetting to default.
  • Fix: Web Client: Fixed pdf preview in operator screen.
  • Fix: Updated evaluating of execution status (MTConnect, Focas, OPC).
  • New: Added an option to display a column with the name of the operator who was logged on when the undefined downtime was generated.
  • Fix: Fixed translations when importing from the Excel.
  • New: Added copy widgets checkbox when creating a new historical dashboard.
  • Fix: Fixed potential crash of server when unsupported time period is given in historical dashboards.
  • Fix: Fixed an issue where notification settings did not retain the selected reports.
CIMCO NC-Base 2026.01.17
  • New: Added four new permissions to control which parts of the configuration each user group can access.
  • Change: Cleaned up the server configuration. Replaced the old Advanced, Advanced 2, and Other Server settings sheets with Program & Files, Version Control, Locking & Read-only, Import Queue, and Status System sheets.
CIMCO Software 2026.01.16 PreviewLibéré: 16-07-26Register to download
Modifications depuis la version précédente :
CIMCO Edit 2026.01.16
  • Fix: Fanuc milling reverse post: #517/518 are handled as common variables.
  • New: Matsuura milling reverse post: Fanuc based.
  • Fix: Fagor milling reverse post: #MCS.
CIMCO NC-Base 2026.01.16
  • Fix: Fixed issue with using program as a field folder.
CIMCO Software 2026.01.15 PreviewLibéré: 15-07-26Register to download
Modifications depuis la version précédente :
CIMCO Edit 2026.01.15
  • Fix: Error when saving MacBundle.
  • Fix: bug with not loading encrypted machines.
  • Fix: Siemens reverse posts: CTRANS. (S29639)
  • Fix: Siemens turning reverse post: CYCLE800.
  • Fix: Fanuc milling reverse post: G10L12R.
  • Fix: Heidenhain milling with turning reverse post: wrong retracts.
  • Fix: Siemens milling reverse post: G75.
  • Fix: Siemens turning reverse post: W collinear axis.
  • Fix: Tool manager: High feed mill tool shape.
  • Fix: Mazak Integrex reverse post: M153/154.
  • Fix: Fanuc reverse post: issue with undefined subprogram arguments.
  • Fix: Siemens reverse post: external subprogram call by file name.
  • Fix: Okuma turning reverse post: TD, M323, G126/127, G136.
  • Fix: Siemens reverse posts: supported $AA_IM[] variables.
CIMCO MDC-Max 2026.01.15
  • New: Introduced $PREV expression in the advanced filter and added check for each change option for a formula evaluation.
  • Fix: Fixed issue when html report was not send as pdf if only as pdf was checked.
  • Change: Fixed an issue where numeric values in real-time DB tables configured as TEXT were returned incorrectly.
CIMCO NC-Base 2026.01.15
  • Fix: Fixed issue with saving Field Folders settings.
  • Fix: Fixed issue with NC-Base not updating modified time for programs in Microsoft SQL.
  • Fix: Fixed issue with Database files outside the NC-Base directory opened in the editor not closing when being auto logout was executed.
  • Fix: Fixed issue with users in rare cases being allowed to save files while not logged in.
CIMCO Software 2026.01.14 PreviewLibéré: 02-07-26
Modifications depuis la version précédente :
CIMCO Edit 2026.01.14
  • Fix: Siemens reverse posts: max tool number is changed to 99999999.
  • Fix: Mitsubishi turning reverse post: spindle speed S1/2/3, tool correction G0 T*.
  • Fix: Fanuc milling reverse post: #0 variable comparison.
  • Fix: Fanuc milling reverse post: G10L12.
  • Fix: Centroid milling reverse post: G43.3, G0 interpolation. (S28768)
  • Fix: Reverse post: work offset system variables assignment issue.
  • Fix: MillPlus milling reverse post: G7.
  • Fix: Siemens milling reverse post: CYCLE840.
  • Fix: Reverse post: tool vector producing incorrect rotation in some cases. (S29496)
  • Fix: Siemens reverse posts: M7/8/9. (S29430)
  • Fix: Siemens reverse posts: supported rounding (RND) of arc-line and arc-arc corners. (S28559)
  • Fix: Haas reverse posts: supported work offset system variables #7001-#7386, #14001-#15966.
CIMCO DNC-Max 2026.01.14
  • Fix: Fixed issue with sending large programs via the FOCAS 1 protocol.
  • Fix: Fixed issue with license counts after installing new license.
  • Fix: Fixed issue with DNCMax client showing deleted users when logging in using NCBase passwords.
  • Fix: Fixed the limit on the number of items in the split window. (S29466)
CIMCO MDC-Max 2026.01.14
  • Fix: Fixed issue with custom variables in Haas M-net protocol. (S25167)
  • Fix: Improved a resolution of timeline in HTML reports. (S27777)
  • Fix: Fixed an issue where live and operator screens in thick clients could stop refreshing data after a live configuration change. (S28512)
  • Fix: Fixed issue with not working CNCINFO[xxx] expressions. (S29465)
  • Fix: Updated MDCMaxCMD.exe to be correctly aligned with report and table IDs.
  • New: Added new time expressions:TIME[NOWDAYNUMBER], TIME[DAYSTARTNUMBER], TIME[DAYENDNUMBER], TIME[ISWEEKSTART], TIME[ISWEEKEND], TIME[ISMONTHSTART], TIME[ISMONTHEND], TIME[NOWDAYNUMBER], TIME[NOWWEEKNUMBER], TIME[NOWMONTHNUMBER], TIME[NOWYEARNUMBER], TIME[DAYSTARTNUMBER], TIME[DAYENDNUMBER]. (S23391)
  • Change: MDC formula dialog in the Events source sheet now also lists TEXTVARs. (S29343)
  • New: Added regular expression for a custom variables (OPC, MTConnect, Brother)
  • Fix: Web Client: Fixed state name to system name conversion for accented letters in Historical Dashboards.
  • New: Added support for Firebird DB in ExternIO.
CIMCO NC-Base 2026.01.14
  • Fix: Fixed issue with incorrect user logged off log messages if DNCMax plugin was enabled.
  • Fix: Fixed NCBase Backup Server failing to cleanup temp files in some cases.
  • Change: Updated SQLAPI to version 5.4.2.
CIMCO Software Manager 2026.01.14
  • New: Added new feature to remotely update the license file.
CIMCO Software 2026.01.13 PreviewLibéré: 23-06-26Register to download
Modifications depuis la version précédente :
CIMCO Edit 2026.01.13
  • Fix: Mitsubishi reverse posts: spindle commands S1/2/3.
  • Fix: Siemens reverse posts: _TC_A1/2 variables. (S29462)
  • Fix: Tool color not working when setup file scanning was disabled.
  • Fix: Slow solid removal animation in some cases when rewinding.
  • Fix: X or Y axis cylinder stock sometimes initially disappearing.
  • Fix: Heidenhain TNC7 reverse post: TCPM error message.
  • Fix: Coolant state output. (S29430)
  • Fix: Reverse post: rotation time calculation.
  • New: Thermwood Milling reverse post. (S26367)
  • Fix: Siemens reverse posts: calling subprograms starting with %_N__SPF. (S28394)
  • Fix: Fanuc milling reverse post: G53.1.
  • New: Okuma milling reverse post: G469. (S28132)
CIMCO DNC-Max 2026.01.13
  • Fix: Updated the CIMCO Windows Agent to handle folders containing a large number of files.
  • Fix: Fixed race-condition sometimes preventing the client from adding ports.
CIMCO MDC-Max 2026.01.13
  • Fix: Fixed an issue when inserting a new row into RT DB tables when Oracle is used.
  • Fix: Web Client: Fixed hour intervals in historical dashboards for when ignoring schedule.
CIMCO NC-Base 2026.01.13
  • Fix: Fixed issue in the NC-Base converter preventing conversion of drawing number field.
CIMCO Software 2026.01.12 PreviewLibéré: 17-06-26Register to download
Modifications depuis la version précédente :
CIMCO Software 2026.01.12
  • Modification : traductions japonaises mises à jour.
CIMCO Edit 2026.01.12
  • Fix: Fixed an issue where automatic sync alignment in Multi Channel view could leave the cursor on the wrong line after editing synchronized NC files.
  • New: Added optional synchronization command mapping for matching different command numbers, such as M770 and M775, in multi-channel synchronization.
  • Change: "Ignore block skip" is moved from control settings to simulation settings.
  • Fix: Reverse post: G65P9811.
  • Fix: Okuma reverse posts: MSG.
  • Fix: Reverse post: inverse time feedrate (G93). (S28811)
  • Fix: Reverse post: lathe tool center compensation for tilt. (S28433)
  • New: Faster machine model / stock collision detection when the machine is frequently in close proximity.
  • New: More robust stock from STL when the STL contains internal geometry.
  • Fix: More robust machine model / stock collision detection.
  • Fix: A turning issue on some milling machines.
  • Fix: Fagor reverse post: "I" suffix support for move parameters.
  • Fix: Fixed an issue where multiline replace could miss occurrences within the current selection.
  • Fix: Fixed an issue where multiline replace would replace beyond the current selection.
  • Fix: Scanning supports tool location values for custom tools.
  • Fix: Siemens reverse posts: CYCLE800.
  • Fix: Roeders milling reverse post: supported Heidenhain commands/cycles. (S29321)
  • New: Tool manager: added tool station number to "Advanced tool location" in turning/mill-turn mode. (S29248)
  • Fix: Heidenhain millturn reverse post: cycle 800. (S28427)
  • Fix: Siemens milling reverse post: CYCLE977.
  • Fix: Reverse post: lathe threading when simulating on milling machine.
  • Correction : poste d'inversion de rotation Fanuc : G76.
  • New: Okuma turning reverse post: B-axis support. (S28045)
  • Fix: Heidenhain reverse posts: APPR LEN.
  • New: Heidenhain TNC7 milling reverse post. (S24521)
  • Fix: Mitsubishi turning reverse post: G74.
  • Fix: Siemens milling reverse post: POCKET3/4.
  • Fix: MacBundle issues when using custom configuration paths.
CIMCO DNC-Max 2026.01.12
  • Fix: Added possibility to use $Variables in default PC path in split window.
  • Fix: Fixed issues & wrong error messages that sometimes occurred when adding a new port through the client.
  • Fix: Fixed issues with environment variables in auto receive destination folder. (Fixed $ORGPATH, $ORGNAME, $ORGNAMENOEXT, $ORGDIR).
  • Fix: Fixed issue with Remote Request & Auto Receive sheets sometimes being blank.
CIMCO MDC-Max 2026.01.12
  • Fix: Fixed an issue where real-time DB tables of type Timeline were not properly aligned.
  • Fix: Fixed an issue where real-time DB tables were not rebuilt during a partial data rebuild.
  • Change: Simple MariaDB reconnections (error 2006) are no longer logged. Added database type information to the DNC Server log.
  • New: Added an option to reopen a previously closed sub-screen when the active state is triggered.
  • Change: Updated the System Table view in MDC Client.
  • Change: Updated SQL scripts creating the mdcemaillog, mdcconnections, and outputdevicelog tables to use nvarchar(max) instead of the deprecated ntext data type.
  • New: Added a 'Rebuild All' checkbox to the rebuild days selection dialog.
  • Fix: Fixed a potential issue in MDC when updating database tables during recalculation.
  • Change: Updated Heidenhain protocol to take into account this option: [OPTION18] POLLGETERROR = Yes.
  • Change: Updated the behavior of input field focus.
  • Change: Added a message box when a file opened from an operator screen does not exist.
  • Fix: Fixed an issue where the report interaction option was not saved.
  • Fix: Web client: Fixed an issue where an empty result from a job data query was not displayed correctly.
  • Change: It is possible now to select multiple HTML reports as attachment.
  • Fix: Fixed FOVR calculating for some models.
CIMCO NC-Base 2026.01.12
  • Fix: Fixed an SQL error when searching for programs in NCBase when using MSSQL.
  • New: Web Client: Added button to associate file with program.
  • New: Added 2 new options under Server Settings > Logging to disable the remember last value behavior of 'Log Prompts' and 'Change Comments' respectively.
  • Fix: Fixed an issue with saving NCBase parameters to the database when MSSQL is used.
  • Fix: Web Client: Fixed issue with printing files.
CIMCO Software 2026.01.11 PreviewLibéré: 03-06-26Register to download
Modifications depuis la version précédente :
CIMCO Edit 2026.01.11
  • Fix: Better robustness on Intel Integrated Graphics.
  • Fix: An issue where turret mounts would not load.
  • Fix: Reverse post: spindle axis center issue in machine coordinates.
  • Fix: Heidenhain reverse posts: wrong rotation axis movements in some cases.
  • New: Reverse post: parametrized machine subprogram macros. (S29004)
  • New: Improved stock compare performance.
  • Fix: True vision rendering stale image during animation playback.
  • Fix: Sharpened shaft/shoulder stock collision margins.
  • New: Support updated web license.
  • Fix: Siemens reverse posts: $P_ACTFRAME. (S27059)
  • Fix: Siemens reverse posts: $P_UIFR.
  • Fix: Fanuc milling reverse post: rotated work offsets G10, G30.
  • Fix: Save Setup not commenting Version Number when writing to top of NC file.
  • Fix: Fanuc/Mazak milling reverse posts: G68.4.
  • Fix: Fanuc milling reverse post: G82 dwell time.
  • Fix: Mazak and Fanuc milling reverse posts: system variables #7001-7941.
  • New: Support threading tools with low corner radius and point corners.
  • Fix: Siemens milling reverse post: G_BACK_TUNNEL.
CIMCO DNC-Max 2026.01.11
  • Fix: Fixed OPC UA monitoring by updating OPC and resolving dependency conflicts.
  • Fix: Fixed issues with receive translators being applied to compressed files resulting in corrupt files.
  • Change: Changed default value of "Show only ports allowed by NCBase" to be consistent across DNC-Max Admin & CIMCO Editor DNC-Max Admin plugin (defaults to false now).
CIMCO MDC-Max 2026.01.11
  • Fix: Web Client: Fixed issue with showing individual OEE Gauges in the historical dashboards.
  • Fix: Web Client: Fixed issue causing live screen translations to not always load correctly.
  • Fix: Fixed issue in the Heidenhain protocol where PLC data paths of type boolean returned the strings "True" and "False" instead of the expected values 1 and 0. (S29135)
  • Fix: Fixed issue when automatically generated reports use incorrect locale settings.
CIMCO Software 2026.01.10 PreviewLibéré: 27-05-26
Modifications depuis la version précédente :
CIMCO Edit 2026.01.10
  • Fix: Fanuc milling reverse post: G68.4.
CIMCO DNC-Max 2026.01.10
  • Fix: Fixed issue with protocol ports in combination with MDC protocol not being licensed.
CIMCO Software 2026.01.09 PreviewLibéré: 26-05-26
Modifications depuis la version précédente :
CIMCO Edit 2026.01.09
  • Fix: An issue where default tool colors would be black instead of following color loop.
  • Fix: Reverse post: wrong incremental move after angular move in turning.
  • Fix: Reverse post: repeating macro program calls in some cases.
  • New: Remembers stock compare gradient setting.
  • New: Remembers True Vision.
  • New: Added simulation shortcut for going to end (Ctrl + Shift + Space).
  • New: Added simulation shortcut for playing / pausing (Ctrl + Shift + R).
  • Fix: Reverse post: inverse kinematics issue when using spindle axis.
  • Fix: Heidenhain reverse posts: issue with ignoring some cycle parameters in some cases.
  • Fix: Consistent milling tool orientation in milling and mill-turn environment. (S28130)
  • Fix: Siemens milling reverse post: POCKET2.
CIMCO DNC-Max 2026.01.09
  • Fix: Fixed issue with the Serial Haas monitor protocol where it stopped working after a program was sent to the machine.
  • Fix: Web Client: Fixed permission issue for showing server files in send / split window.
CIMCO MDC-Max 2026.01.09
  • Change: It is now possible to select a schedule when generating an HTML report by showing the extended options. (S28593)
  • Fix: Web Client: Fixed behavior for OEE Gauge in Historical Dashboards.
  • Fix: Web Client: Fixed an authentication timing issue that prevented Historical Dashboards from displaying.
  • Change: Dialog info box displayed on the operator panel uses the same font as the values shown on the operator panel.
  • New: Added an option to switch to a sub-screen based on the active state. (S28940)
CIMCO NC-Base 2026.01.09
  • Fix: Fixed issue where "Leave original when moving files" didn't apply in certain cases.
CIMCO Software Manager 2026.01.09
  • Fix: Fixed a potential crash in the Software Manager when the keyfile path contained non-ASCII/UTF-8 characters.
CIMCO Software 2026.01.08 PreviewLibéré: 19-05-26
Modifications depuis la version précédente :
CIMCO Software 2026.01.08
  • Fix: Fixed issues with running multiple license servers on the same network.
  • Change: Updated French translations in Tool Manager.
CIMCO Edit 2026.01.08
  • Fix: Okuma reverse posts: OO88.
  • Fix: Fanuc reverse posts: G50.1, G51.1.
  • Fix: Reverse post: wrong entity by line number in some cases when using external subprograms.
  • Fix: A circumstantial freeze when closing Backplot.
  • New: Tweaked cursor when resizing sub program HUD.
  • Fix: Corrupt sub program HUD when Editing main program.
  • Fix: Visibility state not being remembered when toggling geometries from ribbon bar.
  • New: Reverse post: manual tool change position. (S28846)
  • Fix: Siemens reverse posts: added R1000-R1299 variables.
  • Fix: Reverse post: angular move issue in turning.
  • Fix: Siemens reverse posts: MSG command not outputs message into simulation window. (S28577)
  • Fix: Crash in remove chips.
  • Fix: Collision detection not refreshing after changing tool/workpiece setting.
  • Fix: Stock simulation when turning on an AC 5 axis milling machine.
  • Fix: Centroid reverse posts: conditional expressions. (S26828)
  • Fix: NC line highlight sometimes on wrong line when jumping to tool changes.
  • Fix: Siemens milling reverse post: CYCLE800 retract position.
CIMCO DNC-Max 2026.01.08
  • Fix: Fixed issues with DNC-Max Server not recognizing new port types when adding ports.
  • Fix: Added support for FEED Hold signal in RS232 protocol.
  • Change: Improved Haas Serial Monitor to parse monitoring messages. Added MONITORPREFIX=\\CR\\LF\\STX and MONITORSUFFIX=\\ETB in mch file in [HAASMONITOR] section.
  • Fix: Fixed wrong client count at the bottom bar of DNC-Max server application.
  • Fix: Fixed issue with mdc port license granting at start up.
  • Fix: Fixed default send directory issues for SSH protocol & CIMCO Windows Agent.
  • Fix: Web Client: Added modified date to send window.
  • New: Added official support for Microsoft Entra ID as a login module.
CIMCO MDC-Max 2026.01.08
  • Fix: Fixed issue where reports were generated with incorrect tables/graphs.
  • Change: Updated MDC notification log time in the database table to match the actual notification trigger time.
  • Fix: Fixed issue with the advanced filter in the Heidenhain protocol where control modes were not properly evaluated and message variables 1–3 were not working.
  • New: Added an option to enable or disable TLS for MariaDB connections on the operator screen in the button function used for reading job data from the database.
  • Change: Updated MSSQL connectors to trust DB serve certificate.
  • Fix: Fixed issue in Modbus protocol where debug messages were sometimes not populated.
  • Fix: Fixed issue where making a copy of the selected operator screen copied the last operator screen from the list instead. (S28656)
  • New: Added an On-Screen Numeric Keypad for operator screens.
  • Fix: Fixed an issue where the input field on the Operator screen could lose focus.
  • Fix: Fixed wrong title in Setup UI for Switches.
  • Change: Updated Excel export so that Microsoft Excel is no longer required on the server.
  • New: Advanced filter extended about M00, M01, M30 instructions.
  • New: Added official support for Microsoft Entra ID as a login module.
CIMCO NC-Base 2026.01.08
  • Fix: Fixed issue where users were not saved after a fresh install until the DNC server was started.
  • New: Added official support for Microsoft Entra ID as a login module.
CIMCO Software Manager 2026.01.08
  • Fix: Fixed several issues related to stability and error handling & NC-Base web clients now correctly consume a NC-Base client license instead of a DNC-Max client license.
CIMCO Software 2026.01.07 PreviewLibéré: 06-05-26Register to download
Modifications depuis la version précédente :
CIMCO Edit 2026.01.07
  • Fix: Centroid milling RPost: M25.
  • Fix: Siemens turning reverse post: SUPA, G53.
  • Fix: An issue where stopping conditions could would rewind/stop at before the initial play position.
  • Fix: Presentation viewer initially highlighting line 1.
  • Fix: Collision detection progress bar sometimes appearing when it shouldn't.
  • Fix: Centroid reverse posts: added #29000-31999 variables.
  • Fix: An issue where changing theme corrupted stock compare colors.
  • New: Millplus milling reverse post. (S23277)
  • New: New real-time based simulation animation speed slider.
  • Fix: Tool manager: Thread mill shape.
  • Fix: Reverse post: wrong tool rotation angles in some cases.
  • Fix: Reverse post: crash in radius compensation in some cases.
  • Fix: Black screenshot in simulation bundles.
  • New: Added gage point to custom lathe holders.
  • Fix: Fagor reverse posts: #MCS ON/OFF.
  • Fix: Heidenhain reverse posts: CYCL DEF 19.
  • Fix: Fanuc milling reverse post: system variables #2000-2399, #10001-10999, #11001-#11999, #13001-13999.
  • Fix: Arc interpolation regression.
  • Fix: Stock removal when turning with C180.
  • Fix: Fanuc turning reverse posts: #3000.
  • Fix: Fanuc turning reverse post: linear angle issue.
CIMCO MDC-Max 2026.01.07
  • Fix: Fixed issue with opening mdc config on fresh install before DNC server has been started.
  • Fix: Fixed issue with reconnecting custom data paths in the Heidenhain protocol after the CNC connection was lost.
  • Fix: Fixed issue with NCBaseUpgrade causing rebuild errors in MDC-Max.
  • New: Web Client: When opening an operator screen, the first barcode input field will now be automatically focused.
  • New: Web Client: Added OEE Widget and data transformation to the historical dashboard.
  • Fix: Web Client: Restricting access to the subscreen in the operator screen will now block access.
CIMCO NC-Base 2026.01.07
  • Fix: Fixed issue saving editor file type.
CIMCO Software 2026.01.06 PreviewLibéré: 29-04-26Register to download
Modifications depuis la version précédente :
CIMCO Edit 2026.01.06
  • Fix: Reverse post: macro programs issue.
  • Fix: Fanuc turning reverse post: drilling cycle R parameter is absolute/incremental depending on G90/G91 activated. (S28324)
  • Fix: Mazak milling reverse post: Tool length compensation activation control setting. (S28398)
  • Fix: An issue where special characters in tool comments and files names were sometimes corrupted.
  • New: Added turning sample file demonstrating stock flip and split stock.
CIMCO DNC-Max 2026.01.06
  • Fix: Fixed issues with being able to start ports without license if they were high in the port list.
  • Fix: Fixed issue introduced in 2026.01.03/04 regarding license counting.
CIMCO MDC-Max 2026.01.06
  • Fix: Web Client: Fixed issue where the MDC-Max web client was unable to start when the Historical Dashboard config was empty.
  • Fix: Fixed an issue with HTML report settings where the UI behaved incorrectly.
CIMCO NC-Base 2026.01.06
  • New: Web Client: Added custom search in code preview (Ctrl+F).
CIMCO Software 2026.01.05 PreviewLibéré: 27-04-26Register to download
Modifications depuis la version précédente :
CIMCO Edit 2026.01.05
  • Fix: Mazak SmoothAi reverse posts: M98H.
  • Fix: Siemens milling reverse post: OFFN.
  • Fix: Fanuc turning reverse posts: missing variables.
  • Fix: Reverse post: radius compensation issue in mill-turn.
  • Fix: Heidenhain reverse posts: PLANE RESET STAY.
CIMCO DNC-Max 2026.01.05
  • Fix: Web Client: Fixed issue with showing wrong folder in split window.
CIMCO MDC-Max 2026.01.05
  • Fix: Web Client: Button indicators on the operator screen now works when a button is disabled.
CIMCO NC-Base 2026.01.05
  • Fix: Fixed broken add new editor file type button under Machines > Templates & fixed saving issues of the file type.
CIMCO Software 2026.01.04 PreviewLibéré: 23-04-26Register to download
Modifications depuis la version précédente :
CIMCO Edit 2026.01.04
  • Fix: Reverse post: spiral and conical arcs issue.
  • Fix: Mazak reverse posts: #3020 variable.
  • Fix: Fanuc turning reverse post: G73.
  • Fix: Fanuc milling reverse post: WCS Expansion option.
  • Fix: Legacy APT reverse post: MULTAX.
  • New: Collision detection between machine models and in-process stock.
  • Fix: Heidenhain reverse post: PLANE RESET TURN.
  • Fix: Siemens reverse posts: $P_TOOLL.
  • Fix: Heidenhain reverse posts: cycle 17.0 feed rate issue.
CIMCO DNC-Max 2026.01.04
  • Fix: Fixed an issue where DNC-Max Client would not restore to previous window size and position on open. (S27792)
  • Change: Implemented a rename function in the split window for Windows Agent.
  • Fix: Fixed an issue where the Windows Agent copied a program with an empty file name when sending was initiated from NC-Base with file extension renaming enabled.
  • Fix: Fixed an issue where sending via CIMCO Windows Agent initiated by NC-Base ended up with an error.
  • New: Web Client: Browsing of additional directories in send/split window is now possible.
  • New: Web Client: Added delete button to DNC split screen.
  • Fix: Fixed issue with infinite loop of port directory update.
CIMCO MDC-Max 2026.01.04
  • Fix: Fixed not working telemetry data lifetime.
CIMCO NC-Base 2026.01.04
  • New: Web Client: Now possible to upload program to auto import folder.
  • New: Added a new NC Event 'PROGRAM_UPDATED' in the Execute module.
  • Fix: Fixed an issue with MSSQL where the Execute module setup could not be saved.
CIMCO Software 2026.01.03 PreviewLibéré: 16-04-26Register to download
Modifications depuis la version précédente :
CIMCO Software 2026.01.03
  • Modification : traductions portugaises mises à jour.
CIMCO Edit 2026.01.03
  • Fix: Fixed unlocalized file type template names in 'Add new file type' dialog. (S28405)
  • Fix: Fanuc Turning STARGB reverse post extension: G910, G69.1.
  • Fix: Missing control settings localization in Haas and Mitsubishi turning reverse posts. (S28236)
  • Fix: Reverse post: G10L2P0.
  • Fix: Fanuc turning reverse posts: drilling axis issue. (S28324)
  • Fix: File open dialog for DXF shows "Open STL File"
  • Fix: Reverse post: cylindrical interpolation regression.
  • Fix: Spindle to stock collision reporting issue when the spindle model was in inches.
  • Fix: False positive stock/holder collisions when turning on stock STL.
  • New: Added Clamp/unclamp time settings.
  • New: Advanced Chuck Jaw setup.
  • Fix: Okuma milling reverse post: G283/284.
  • Fix: Siemens turning reverse post: TRANSMIT_S.
  • Fix: Siemens reverse posts: G500 fix caused regression.
  • Fix: Better simulation robustness on Intel Integrated Graphics.
  • Fix: Stock compare update when changing workpiece.
  • Fix: Collision detection issues when multiple workpieces or fixtures.
  • Fix: Issue where hiding workpiece could pause simulation.
  • Fix: Toolpath vectors only showing for half the toolpath.
  • Fix: A circumstantial freeze when closing Backplot.
  • Fix: Reverse post: diameter programming issue for variables.
  • Fix: Centroid milling reverse post: M98, M25.
  • Fix: Centroid reverse post: system variables support. (S26828)
  • Fix: Machine configuration.
  • New: Statistics can show graph for selected tools. (S27148)
  • New: Default view can now be changed in the machine configuration editor.
  • New: Now bundles external sub programs in simulation bundles.
  • New: Support vertical milling extenders.
CIMCO DNC-Max 2026.01.03
  • Fix: Fixed potential crashes from clicking links in log.
  • New: Added support for Windows 95 in the CIMCO Windows Agent.
CIMCO MDC-Max 2026.01.03
  • Fix: MTConnect updated alarms.
  • New: Added message variable to the advanced filter.
  • Change: Updated Haas Serial Monitor to Generate MONONLINE / MONOFFLINE when machine doesn't respond in a given time (command time out).
  • New: MTConnect: added option to calculate SOVR from cmd spindle speed and actual spindle speed.
CIMCO NC-Base 2026.01.03
  • Change: Added option to revert NC program status to "Run-In".
  • Fix: Web Client: Fixed an issue with file preview that caused certain text files to load incorrectly.
  • Fix: Web client: Fixed issue with file transfer when running a MSSQL Server.
CIMCO Software 2026.01.02 PreviewLibéré: 23-03-26Register to download
Modifications depuis la version précédente :
CIMCO Edit 2026.01.02
  • Fix: Mazak milling reverse posts: G68, G68.2.
  • Fix: Siemens reverse posts: D+SUPA command issue.
  • New: Add Keep decimals, Strip leading zeros and Strip trailing zeros options to Adjust Feedrate and Adjust Spindle Speed dialogs. (S27518)
  • Fix: Reverse post: home position units issue.
  • Fix: Stock simulation issue when C not zero.
  • Fix: arc scanning issue.
  • Fix: An issue where 'remove chips' sometimes removed the wrong piece.
  • New: Tool visibility state is now remembered.
  • Fix: Remove chips sometimes removing too much material after parting off.
  • Fix: Tool mounts missing in simulation bundles.
  • Fix: False positive collisions in turning.
  • Fix: An issue where going to end would not always update stock.
  • New: Memory optimizations.
  • New: Better STL repair for stock compare.
  • Fix: Haas milling reverse post: P9817/9818.
  • Fix: Okuma milling reverse post: VRSTT, VZOF*, fixed issue with labels.
  • Fix: Loading of stock from STL when paths contain Chinese characters.
  • Fix: Multi Channel: Fixed an issue where the configured Channel Order was not always preserved. (S28040)
  • Fix: Siemens milling reverse post: G500.
  • Fix: Mazak Integrex reverse post: M211.
  • Fix: Siemens turning reverse post: CYCLE800. (S28020)
  • Fix: Turning when work origin not on rotation axis.
  • Fix: Orientation of turning tools when turning on horizontal mills.
  • New: Automatically selects the Backplot tab when launching directly into simulation from CAM integrations.
  • Fix: Centroid milling reverse post: G43.3, G43.4 display tool position issue. (S26828)
  • Fix: Machine home position when in inches.
  • Fix: Corrupt stock when using remove chips with stock compare.
  • Fix: Reverse post: radius compensation issue.
  • Fix: NC code missing from .CimcoSimData when exporting simulation bundle.
  • New: Improved stock model collision detection.
  • Fix: Heidenhain reverse posts: M130.
CIMCO DNC-Max 2026.01.02
  • New: Added check of validity of key & cert to startup of webserver.
  • Change: Updated error handling of program receive over FOCAS.
  • Change: Moved WEB API & Startup banner to Server Config -> Advanced setup sheet.
  • Change: Added additional translations to the DNC-Max web client.
  • Change: Updated web server command-line parameters to ensure a default connection is always available.
  • Change: Moved settings "Allow users to re-start ports" and "Allow users to send 'Local Files'" from the clients to the server.
CIMCO MDC-Max 2026.01.02
  • Fix: Web Client: Added multiselect capabilities to the downtime list for bulk resolving downtimes.
  • Fix: Implemented missing feature 'Value store mode' for variables job and program. (S28058)
  • Fix: Fixed issue with counters and timers not being correct in rolling timelines.
  • Fix: Web Client: Fixed an issue causing screens to sometimes not load correctly on page reload.
  • Fix: Fixed an issue when TEXT[EXCELVARx] didn't work in a text comparison condition e.g.: TEXT[JOB]<>TEXT[EXCELVAR1]. (S22730)
  • Fix: Fixed an issue where MDC expressions related to schedule (TIME[ISHIFTSTART], TIME[ISHIFTEND], TIME[SHIFTSTART], ...) did not work correctly.
  • Change: Added additional translations to the MDC-Max web client.
CIMCO NC-Base 2026.01.02
  • Fix: Fixed MariaDB 11.8.5 startup issue on Windows Server 2016 by including required ICU DLLs in the installation. (S28095)
  • New: Added new option 'Don't allow programs to be overwritten when 'Approved'.
CIMCO Software 2026.01.01 PreviewLibéré: 09-03-26Register to download
Modifications depuis la version précédente :
CIMCO Edit 2026.01.01
  • Fix: Spindle mount collision detection.
  • Fix: Spindle mount scaling when in inches.
  • Fix: Fanuc milling reverse post: G68.
  • New: Command line (--savebundle path) for saving simulation bundle.
  • Fix: Reverse post: fixed not updating some of linked variables.
  • Fix: An issue where jumping to limit over-travel would highlight NC line 0.
  • Fix: Remove chips when on sub spindle.
  • Fix: Default mounting on cross turning tools with round shank.
  • Fix: Tool colors setting not loading correctly when starting CIMCO Edit.
CIMCO DNC-Max 2026.01.01
  • Fix: Added Additional Directories for Network Monitor Ports.
  • Fix: Fixed Fanuc focas1 send function.
  • Fix: Fixed issue with drip-feeding when Dripfeed file resume is enabled. (S27790)
  • Fix: Web Client: User logins are now added to the NC-Base system log for all web client types.
  • Fix: Web Client: Fixed issue causing web clients to not correctly detect mobile layouts.
  • New: Web Client: Split screen will now show "Date Modified" for files.
  • Fix: Update Telnet SSL communication loop to better handle SSL handshake.
  • Fix: Multihead machines (Fanuc Focas) which utilize extensions to determine sending directories now consider upper- and lower-case versions of extensions to be the same.
  • Fix: Fixed SSH protocol when working with non-ASCII file names.
  • New: Web Client: Added machine log to split screen.
  • New: Web Client: It is now possible to sort files by name or modified date in split screen.
  • New: Web Client: Added search filter to split screen.
  • New: Web Client: It is now possible to rename files from the split screen.
CIMCO MDC-Max 2026.01.01
  • Fix: Web Client: Auto scroll will now scroll to top of page if only one slide is in slideshow.
  • New: Web Client: Added indicator on historical widget when an evaluation has failed.
  • Fix: Web Client: Added status information to the shopfloor and made font sizes more dynamic. Font sizes can now be overwritten.
  • Fix: Fixed hang when editing schedule configuration. (S27762)
  • Fix: It is now possible to auto close a sub-screen in the web client when an input field is submitted.
  • Fix: Correctly log user logout when the client is closed.
  • Change: Added UI option to configure connection and response timeouts for the SMTP notification interface.
  • New: Web Client: Added dynamic zoom to timelines in historical dashboards.
  • New: Web Client: Added legend to shopfloor.
  • Change: Updated Heidenhain protocol to support a secure connection.
  • New: Web Client: Added drilldown functionality to charts in Historical Dashboards.
  • New: It is now possible to configure schedules to start on Sunday.
  • New: Web Client: Value widgets in Historical Dashboards can now have color ranges.
CIMCO NC-Base 2026.01.01
  • Fix: Fixed an issue with "Leave copy of program file" option being greyed out when adding a new program.
  • Fix: Fixed issue with blank string in field folders drop down menu.
  • Fix: Correctly log user logout in NC-Base when the editor is closed.
  • Fix: Fixed a rare crash when viewing files with extremely long paths and containing '.' as part of the name (other than the .ext).
  • Fix: Updated database field partnumber from VARCHAR 100 -> text.
  • New: Web Client: Users can now print text and image files directly.
  • New: Web Client: Added zoom to the image preview via mouse or touch gestures.
  • Fix: Allow 'Part number' to have a max length up to 256 instead of 100.
  • Fix: Fixed an issue that caused program file extensions in some cases to be doubled.
  • Change: Updated MariaDB to version 11.8.5.
  • New: Added preview of Office documents (Word, Excel, PowerPoint).