Looking good at Mach 2014!

MACH is the UK’s premier manufacturing technologies event, encompassing metalcutting and metalforming machine tools along with all ancillary and related products and services. In picture: Our stand with Nicklas Sjøner and Steve Tanner ready for the rush. More information: Official Mach 2014 website

New feature in CIMCO CNC-Calc

CNC-Calc now supports adding measurements to and between geometrical elements. Postfixes and prefixes such as tolerance and diameter can be manually adjusted.

CIMCO at Hermle’s In-house Exhibition

CIMCO will once again be participating in Hermle’s traditional In-house Exhibition. The exhibition starts April 9th and ends April 12th.


CIMCO will be at SIMTOS 2014 from 9-13 April in Kintex, Korea. Meet Mr Seungwoo Lee from Quick CADCAM at booth 9G105. More information: Official SIMTOS website

CIMCO at Mach 2014

CIMCO will be present at Mach 2014 April 7th to 11th, NEC, Birmingham UK. We will be on stand 4372 Hall 4.

CIMCO at VTM 2014

The exhibition VMT 2014 runs from 1 through 4 April 2014. Come and see the latest version of CIMCO Software at booth 4928

CIMCO CNC-Calc now supports splines

In CIMCO CNC-Calc it is now possible to create/import splines and use them in creating toolpaths. The splines can either be imported from dxf files or drawn directly in CNC-Calc.

CIMCO adds support for monitoring Siemens controls

CIMCO adds support for monitoring Siemens controls using a new compact adapter. The small adapter plugs into the Siemens PROFIBUS/MPI bus and connects to the company Ethernet network. The device is easy to set up in CIMCO DNC-Max and sends status messages to CIMCO MDC-Max for analysis of machine performance.

CIMCO proudly presents the CNC Handbook

As a service to our many customers, especially within the educational sector, we are very happy to provide the CNC Handbook, a comprehensive work on the fundamentals in programming and operating CNC mills and lathes, including typical examples of parts, materials, tools, and fixtures.

New feature in CNC-Calc: Store parameters

It is now possible to save parameter sets in CIMCO CNC-Calc, and all the operation parameter dialogs have been changed so they have buttons for “Save Parameters”, “Load Parameters”, and “Reset”. The feature has been implemented in the latest version of CNC-Calc that is available for download with CIMCO Edit.