CIMCO Software 2024 Releases

CIMCO Software 2024.01.07 PreviewReleased: 22-04-24Register to download
Changes since previous version:
CIMCO Edit 2024.01.07
  • Fix: An issue where there could be false positive stock/holder collisions.
  • Fix: Brother reverse post: subprogram call issues with G65 and M98H. (S21113)
  • Fix: Heidenhain reverse post: cycle 411 issue. (S21080)
  • Fix: Brother milling reverse post G81, G85, G77, G78. (S21113)
  • Fix: Okuma milling reverse post: G81 retract value and G30 reference position. (S21105)
  • Fix: Tool path statistics min Z value. (S20960)
  • Fix: Reverse post: Tool center point control issue producing wrong linear move.
  • Fix: Hurco milling reverse post G68.2 command.
CIMCO MDC-Max 2024.01.07
  • Fix: MTConnect update.
  • Change: Updated ExternIO - MQTT to avoid a potentially duplicated messages when publishing.
  • New: Added a new configuration sheet to change max log lifetime for HW outputs.
CIMCO NC-Base 2024.01.07
  • Fix: Fixed crash when previewing PNG files.
CIMCO Software 2024.01.06 PreviewReleased: 16-04-24Register to download
Changes since previous version:
CIMCO Edit 2024.01.06
  • Fix: Added "shortest" rotary axis positioning setting to all turning reverse posts that support mill-turn.
  • Fix: Siemens milling reverse post cycles 976/979. (S21017)
  • Fix: An issue where measure distance information overlapped with toolpath information when windows scaling was not 100%.
  • Fix: An issue where solid simulation did not work with Intel integrated graphics cards.
  • New: Machine builder geometry mounting options added to linear table axes.
  • Fix: An issue where some stl geometries with special characters in the path failed to load.
  • Fix: An issue where some turning moves would make corrupt cuts.
CIMCO DNC-Max 2024.01.06
  • Fix: Web client: Fix encoding issues in web clients.
CIMCO MDC-Max 2024.01.06
  • Fix: Fixed MTConnect direct protocol.
  • New: New HW outputs introduced in MDC.
CIMCO NC-Base 2024.01.06
  • New: Web client: Video files can now be previewed in the browser.
CIMCO Software 2024.01.05 PreviewReleased: 08-04-24Register to download
Changes since previous version:
CIMCO Edit 2024.01.05
  • New: Improved stock simulation accuracy of 5 axis ball mill tools.
  • New: Machine builder automatically sets rotation axis direction from axis letter.
  • New: Optimized stock simplification.
  • Fix: Fixed wrong rotations in some cases when applying positive/negative tilt setting. (S20917)
  • Fix: Reverse post: supported comments before value/assignment when defining variable. (S18145)
  • Fix: Heidenhain reverse post: added "Map letters" setting.
  • New: Stand-alone simulation mode can now toggle stock compare.
  • Fix: An issue where some turning tools would cut more material that intended in stock simulation.
  • Fix: A stock issue, where corners were sometimes chamfered off during simplification.
  • Fix: An issue where very certain helical arcs would become invalid.
  • Fix: Siemens probing cycle 977 rib measuring direction issue. (S20871)
  • Fix: Okuma Turning reverse post: "A" angle value support in G0/G1. (S20858)
  • Fix: Hurco reverse post: Set tool number max value to 999. (S20845)
  • Fix: Reverse post: issue with applying default works offset when no work offset calls in the program.
  • Fix: An issue where stock STL export would also be in millimeters.
CIMCO DNC-Max 2024.01.05
  • Fix: Fixed problem starting debug log when not logged in.
  • Fix: Web Client: Fixed issue affecting the ability to send files and port visibility when NC-Base link was inactive.
CIMCO MDC-Max 2024.01.05
  • Change: Updated SQL query for MSSQL for RT DB tables to avoid DNC server crash.
  • Change: Updated loading DAT files from a csv file larger then 2 GB.
  • Fix: Fixed issue when slideshow time couldn't be set in the Client setup dialog. (S20805)
CIMCO NC-Base 2024.01.05
  • Fix: NC-Base Server automatically updates user-password column. (For MariaDB case: update is done when stop and start of the database is done. For MSSQL case: update is done automatically once you open the database server dialog).
  • Change: Added a shortcut CTRL+L to open program / file location.
  • Fix: Fixed issue when 'Enable trigger' in Program format was unchecked after setup dialog reopen. (S20921)
  • Change: Optimized SQL query for MSSQL when advanced search 'All fields' is used.
CIMCO Software 2024.01.04 PreviewReleased: 20-03-24Register to download
Changes since previous version:
CIMCO Edit 2024.01.04
  • Fix: SolidWorks keyboard mapping in fast simulation mode. (S18735)
  • Fix: Siemens milling reverse post: supported cycles SLOT1, SLOT2. (S18959)
  • Fix: Heidenhain reverse post: CYCL 414 measuring direction. (S20774)
  • Fix: Siemens milling reverse post: added LONGHOLE cycle support. (S18959)
CIMCO DNC-Max 2024.01.04
  • Fix: Fixed issues when attempting admin things when logged in as user.
CIMCO Software 2024.01.03 PreviewReleased: 18-03-24Register to download
Changes since previous version:
CIMCO Edit 2024.01.03
  • Fix: Rotary axis mode not setting correctly in some cases. (S20747)
  • Fix: Okuma reverse post: subprogram calls by number.
  • Fix: Heidenhain reverse post: approach point in cycle 409.
  • Fix: Heidenhain reverse post: Supported cycles 230, 231, 232. (S14296)
  • Fix: Fagor Turning reverse post: Supported J value in G68. (S20106)
  • New: Hidden model collisions can now be turned ON/OFF.
  • New: Tool/Workpiece collisions can now be checked during rapid moves only in collision report.
CIMCO DNC-Max 2024.01.03
  • Fix: Fixed password / admin issues.
  • Fix: Fixed issue when client was logged in as user and then tried to perform task that required admin permissions.
  • Fix: Fixed issues with client side login on localipc.
  • New: Web Client: It is now possible to select and send multiple files at the same time.
  • New: Web Client: Added support for Windows Authentication Single-Sign-On.
CIMCO MDC-Max 2024.01.03
  • Change: Added $ALARMDESC and $ALARMCODE in MTConnect telemetry protocol.
  • Fix: Citizen: added reading part count, added control modes.
  • Change: Monitorlog trigger is checked at every MDC start.
  • New: Added a unique sequence id per connection '$SEQUENCEID' in ExternIO.
CIMCO NC-Base 2024.01.03
  • New: Web Client: Added support for Windows Authentication Single-Sign-On.
CIMCO Software 2024.01.02 PreviewReleased: 11-03-24Register to download
Changes since previous version:
CIMCO Edit 2024.01.02
  • New: Presentation mode. Export the current simulation to a file to be opened as a stand-alone simulation.
  • New: Tool Setup: Milling assemblies can now be set to a 270 deg. orientation.
  • Fix: An issue where custom tools by name in tool scanning would not work if the name contained white-spaces.
  • Fix: An issue where integration tool exports work origin would sometimes not be imported correctly when in inches.
  • New: Toolpath statistics graph: Showing information tooltip for selected point. Using "arrow" keyboard buttons for scrolling zoomed graph. (S17883)
  • New: Okuma Milling reverse post: Renishaw probing cycles support.
CIMCO MDC-Max 2024.01.02
  • Fix: Focas: added support for floating numbers when macro function is used.
  • Fix: Fixed Focas: PMC variables formatting. Fixed part count mode configuration.
  • Change: Web client: Reduce web server size and improve install speed.
  • New: Columns width in the MDC Events log view is now saved. (S20372)
  • New: Implemented a help function to load DAT files from a csv file to the database. In 'System tables' CTRL+L shows up a File opening dialog.
CIMCO NC-Base 2024.01.02
  • Fix: Fixed issue when a database field is updated from file content even its trigger is disabled.
  • Fix: Added authentication to modify/insert user table request.
CIMCO Software 2024.01.01 PreviewReleased: 04-03-24Register to download
Changes since previous version:
CIMCO Edit 2024.01.01
  • Fix: An issue where rotational axis limits converted to MM when the machine was defined in inches.
  • Fix: Fanuc milling reverse post: G15/16 command support. (S20102)
  • New: Renishaw probing cycles support for Haas and Mazak milling reverse posts.
  • New: Fanuc Milling reverse post: Renishaw probing cycles support.
  • Fix: An issue where transparency didn't work in standard Backplot.
  • Fix: Roeders reverse post: Supported ".sub" program file extension.
  • New: Reduced stl export file sizes.
CIMCO DNC-Max 2024.01.01
  • Change: Updated MTConnect agent launch thread.
  • Change: Increased number of connections to the DNC server (port 4444) from 64 to 256.
  • Fix: Web Client: Implemented additional security enhancements.
  • Change: Upgrade Node.js to latest LTS version.
CIMCO MDC-Max 2024.01.01
  • Change: Added Dashboards and Shop Floor View to the MDC-Max permission system.
  • Fix: Fixed issue with configuration UI when all setup data was blank.
  • Fix: Fixed Mitsubishi control modes, execution status.
  • Fix: Web Client: Fixed issue causing web clients to not load fonts correctly on some local networks.
CIMCO NC-Base 2024.01.01
  • Fix: Fixed issue with advanced search in NC-Base when MSSQL is used.
  • New: Added a basic NC-Base web client. Requires a DNC-Max server.